hello i have a samsung s7 edge sm-g935f
b:3 k:1 s:2 android 8.0
It is frp locked i have tried flashing a lower android on it but i keep geting a fail with odin also i have tried with otg cable but nothing shows on the screen is this phone broke for good or is there a way to fix it as i have tried everything i have even tried dr phone tool but it says my phone is not supported thanks in advance for any replays
Related
Hello to every one
I have samsung galaxy s5 900fd CAC origin i recently applied its lollipop update through odin 3.07 . but when i tried to downgrade to kitkat i donno how its boot loader changed to 900md and also secure storage become enabled with UDC Start. each time i flash / format cell i got locked untill i provide my samsung identity . Reactivation lock is ticked but it is off at boot screen , it won;t vanish no matter how many time i provide my samsung identity. finger print scanner crashes with an error. Fingerprint scanner works fine and reactivation lock tick disappears when i apply lollipop update but 900md and udc start dont remains there .... Please tell guide me how to apply clean firmware ??? and get rid of 900md and UDC start... Thanks any advance.. ????
I solved it by
Flashing firmware again and when half done i pulled off cable firmware error and the again boot into download mode and flashed complete with latest Odin version.
MOD PLZ DELETE THIS POST
Hello everyone!
I need a little advice to fix my softbricked note 4
So here are the facts:
I boght a bricked N910F i tryed different roms from sammobile using odin and twre, more than 7 to be specific, and most of them did t work as it shoul. My imei was the same as on the case but i noticed SN was different in system and knox 0x1.... I got a version of android 6.0.1 to work but there were different little, big problems like not rememering wi fi passwords, fingerprint not working version :null in testing, and often restarts and bootloops after installing different aplications. i tryed many things even repartition with proper pit file, i still had back-up of my efs but considering the serial number was screwed up i gave up trying anything else. I tryed rooting with different methods but everything failed.
I boght another N910F with screen broken but working mainboard and knox 0x0
Swaped the mainboard, tryed samsung kies 1, entered serial and model and it gave me the fw i needed to flash. Tryed flashing with kies and at the middle of transfer it said failed and phone froze, didnt even power on for a while. Tryed again after a few howrs, same rezult with message emmc read fail, and at the bottom emmc write fail.
kies said i need PDAG2/CSCE2 / PHONEE3 CNX
Now, later in the evening i managed to power it on agan and i dont know what to try so i dont screw up with knox
Here are some pictures of my current status:
Current status: cant post picture...
ODIN MODE (HIGH SPEED)
PRODUCT NAME SM-N910F
CURRENT BINARY Samsung Official
System Status Official
REACTIVATION LOCK OFF
Knox 0x0
qualcomm secureboot enable csb
RP SWREV S1 T1 R1 A1 P1
secure download enable
UDC STAR
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
What should i try next?
Thanks
Later Edit:
looked up on youtube and found that smart switch can do the work, tryed it and seems it went all the way and installed proper rom without fail. LOL
Morning edit:
So everything worked perfect last night so i left it on fastcharger. In the morning i found it in download mode with dii emmc read fail, could not do normal boot.... After this i have to let it rest a bit without battery, then it boots up ok, works a few minutes then it shuts down and never wake up
faurionutz said:
eMMC from phone is damaged harware
Click to expand...
Click to collapse
I found the only way to keep it working is by preventing it to go into sleep mode. Play music on repeat muted keeps it working
Lucky i have fast chargers and 3 battery
i tried different keep alive apps but they eventually fail and phone dies
Helo Guys i want to try re flash firmware 5.1.1 on s6 edge+ (all methods tried but failed) plz help me.
Method Tried
Samsung Smart Swtich ( Error Please check model name or s/n and enter again)
Tried odin3 almost all version failed ( screen shot attached) with error.
and one thing more i want to share you that my device showing me model name SM-G928F in software info and on other hand it showing me model SM-G928A in downloading Mode.
please guys help how to restore it on stock firmware
Did u go to settings>about phone, tap build # 7 times, go to settings>developer options>enable OEM unlock?
yes tried failed.
Are you trying to downgrade from marshmallow?
furqansaeed18 said:
Helo Guys i want to try re flash firmware 5.1.1 on s6 edge+ (all methods tried but failed) plz help me.
Method Tried
Samsung Smart Swtich ( Error Please check model name or s/n and enter again)
Tried odin3 almost all version failed ( screen shot attached) with error.
and one thing more i want to share you that my device showing me model name SM-G928F in software info and on other hand it showing me model SM-G928A in downloading Mode.
please guys help how to restore it on stock firmware
Click to expand...
Click to collapse
so which one is actually your device?
AT&T's or the other?
other
maybe it's failing cause it needs the actual odin files for SM-G928A...
Sent from my SM-G925F using Tapatalk
I purchased handset from market the model is sm-G928f and the software installed showing me sm-g928a in recovery mode and in download mode.
Hi I tried to root my Samsung S6 Edge Model (SM-G928F) using the firmware posted here https://forum.xda-developers.com/s6...-edge-plus-t3194607/post62744199#post62744199
Here is the phone build number MMB29K.G928FXXS3BQA7 and I am running Android 6.01
But I ended up with a bricked phone and a black start up screen with the errror "Kernel is not SEAndroid Enforcing" and then ended up have to use Samsung Kees to recover the phone.
Any ideas what I can use to root the phone without this happening again
southcirc said:
Hi I tried to root my Samsung S6 Edge Model (SM-G928F) using the firmware posted here https://forum.xda-developers.com/s6...-edge-plus-t3194607/post62744199#post62744199
Here is the phone build number MMB29K.G928FXXS3BQA7 and I am running Android 6.01
But I ended up with a bricked phone and a black start up screen with the errror "Kernel is not SEAndroid Enforcing" and then ended up have to use Samsung Kees to recover the phone.
Any ideas what I can use to root the phone without this happening again
Click to expand...
Click to collapse
Did you enable Oem unlocking and usb debugging from developers option before trying this method? Enable oem unlocking and usb debugging from developers option and try again..
Hi, I just got my s8 from my cousin
and the condition is kinda uehmehm ( with a shattered glass + green glitchy lcd, and a 'smoll' crack on the bottom edge)
It's hard to turn them on because its always says
"Only official released binaries are allowed to flash"
So I decided to flash the phone with odin, then I turn on my s8 into download mode and I see that it has custom rom and something worse, yes its a knox tripped s8 :>
Next I try to connect the s8 with my pc and it wont read the s8 and from now I don't know how to solve the problems
I already install the samsung usb driver but still it wont read the s8 from the download mode.
my question rn :
1. Is there any solving method can I do ?
2. can knox disable the android usb/other feature?
3. Yes I know knox is like a one time things only from 0x0 into 0x1, but can I bypass/unlock it? and if I can, is there any problems/error that I will get?
Thx cuy!