Anyway to get rid of these tips from the dial screen?
Follow the tip by searching for one of your contacts (I used my banks number) and then select one of the suggestion, it will dial the number, and just hang up.
Then it's gone.
Thanks!
Related
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Hi!
Is there a way (a tool or sthg like that) to add several numbers to a fav contact?
E.G. I added my wife to my favs but I can only chose to call our home number or her cellular. It is not possible to add her with our home number an add her additionally with her cellphone number. That´s annoying. It would be nice either to add a person twice with different numbers or once with a pop-up where you can chose the number to dial.
Has anyone a solution for that?
Regards,
insi
This is frustrating me as well. I want one person to appear twice on my People Favorites (one with her home number and one with her mobile).
1IV54IV3 said:
Hi!
Is there a way (a tool or sthg like that) to add several numbers to a fav contact?
E.G. I added my wife to my favs but I can only chose to call our home number or her cellular. It is not possible to add her with our home number an add her additionally with her cellphone number. That´s annoying. It would be nice either to add a person twice with different numbers or once with a pop-up where you can chose the number to dial.
Has anyone a solution for that?
Regards,
insi
Click to expand...
Click to collapse
When you select a person to add, it gives you the list of contact methods. Just select "View contact card".
thv a bunch m8
1IV54IV3 said:
thv a bunch m8
Click to expand...
Click to collapse
You're welcome matey
Having both!
If you add a favourite with any number, and you press the image itself, it will call the pre-assigned number. But if you tap on the name just below, you will get the contact card.
-Didrik-
re: having both
nice tip, these should both be in the tips sticky.
Hi all,
I am with Rogers and just upgraded to R2BA020. I notice previously from tapping a contact number contacts, it can dial out directly. But now it is extremely annoying that I tap the contact number, it puts the number into the dialer (screen with dialing pad), then I hit the call to dialout.
Does anybody find the dial from contacts behaviour changed?
Is there a dialer that can completely replace the stock one?
Thanks
i haven't received any updates for my phone yet, but that sounds more hassle to make a call now. maybe this change is for people who complained about accidentally tapping on the number and it calls out when they did not intend to do so. mind as well just tap and hold on the contact's name and select make a call to mobile/home/office
Meh, that doesn't seem too bad, but it is annoying nonetheless. I think if you dial, and put the phone by your ear, it should use the proximity sensor to realize it should start calling.
Android Variations: Check em out!
Yes, i too noticed this ! Funny instead of making the call process easier its now actually longer !
The workaround is to go to ur phonebook & long press the contact to call.
yup, long press can skip the dialpad but it brings up another box to click through before calling....
I have never came across a phonebook with any phone that is 2 clicks before it dials. It is just pure annoying. They got it right the first time, I don't know why SE messed it up now.
yeah, i have a rooted x10a to the 23 firmware, and its taking me to the dailer after i hit my contact's number. this is rather annoying, we gotta find a fix for it!!
Yes I noticed that too. I find it annoying. Is there a work around to this?
I use another dialler called aTAKEphONE, it will dial directly.
There is a trial available at shsh.com
when i go into the contacts menu, choose a contact and press the number to dial, instead of going straight into dialing mode which it did before the rogers update, it now displays the number when clicking the number in which i have to press call, a whole extra step. Any ways to fix this?
i thought it should seen as a improvement?
now you can now always edit before call , previously you need to call first and edit the number from call list
Does it for me too, but as a lot of my contacts have two numbers I prefer it as I don't always tap the right number.
gaolinde said:
i thought it should seen as a improvement?
now you can now always edit before call , previously you need to call first and edit the number from call list
Click to expand...
Click to collapse
well, when I do travel, because of Roaming/Local numbers, I prefer the number showing up instead of call direct , STILL, I would like a fast way to call, I do at the moment 4 taps to it...
yeah, everyone has known about this one. But got this apk file from somewhere in the forum or the net (i dun remember)
hope everyone like it
yes
this is the one
the only one
thanks
Hi guys
Has anyone noticed that when searching for a contact (T9 search) in samsung stock dialer, the search function it only lists the first number for a contact if they have more than 1 applied to their card. Problem is you can't view other numbers, it just immediately starts dialing that one number instead if you try to select it ( there is no way to select and see the other numbers)
I have contact with 3-4 numbers so its annoying me. I know there is Dialer One, Go contacts etc but none of them have the clean interface the stock dialer has .
If you click the contact photo it shows all the numbers.
At least my one does....
I'd hate to bring up an old thread, but I used the magical search button and found this thread.
I have this problem, too, and it's really annoying.
Pressing the contact photo doesn't bring up the rest of the numbers for me.
If it helps, my contacts are synced via my google account, and I have a feeling this doesn't happen for contacts locally stored on the phone.
Does anybody have a solution for this?
I'm currently using a different dialer, but I'd prefer to stick to Samsung's dialer if possible.