Database Users

N910F 5.1.1 upgrade failed - help please!

Used Odin 3.10 to update my 910F from 5.0 to 5.1
It seemed to go OK but at the end the phone was in boot fail.
When I run it again, Odin fails right at the end and leaves this message on the screen:
UDC START
Volume size is too big 81920 < 471840
ODIN : Invalid ext4 image
I used the German 5.1.1 from Sammobile.
How do I get out of this please?:

You'd better flah this one: http://forum.xda-developers.com/note-4/general/rom-unofficial-repacked-lollipop-t3105093
It helped me.

Thanks for the hint!
I ran that one and Odin finished successfully, which it wouldn't do before. But the phone still won't boot beyond the Samsung stars screen, with the blue light on and getting hot.
After that I tried again with the official 5.1.1 from Germany, and this time Odin went through OK with no errors shown, but the phone still hangs on boot.
Any more ideas?

Finally fixed it.
I stumbled about with a few different firmwares, and eventually got it to a state where the official 5.1.1 finally came to life.
Still not sure exactly what happened, but I now have a Note 4 with 5.1.1 and working again.

rwa66 said:
You'd better flah this one: http://forum.xda-developers.com/note-4/general/rom-unofficial-repacked-lollipop-t3105093
It helped me.
Click to expand...
Click to collapse
But there u dont have OTA updates anymore...
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
RR-99 said:
Finally fixed it.
I stumbled about with a few different firmwares, and eventually got it to a state where the official 5.1.1 finally came to life.
Still not sure exactly what happened, but I now have a Note 4 with 5.1.1 and working again.
Click to expand...
Click to collapse
For me works on my unbranded device only Sweden firmware 5.1..1 saccessfully.
Others gave me fail on the end of update...

Downgrade device 5 binary 3

Hello,
my son has a samsung a3 2016 and unfortunately he made a hard reset and now can't remember the google account info. To bypass it i wanted to downgrade it to 6.0 from 7.0 but sw rev check fail device 5 binary 3 error.
Is there anyway to handle this problem?
Thanks

phonezandmore said:
Hello,
my son has a samsung a3 2016 and unfortunately he made a hard reset and now can't remember the google account info. To bypass it i wanted to downgrade it to 6.0 from 7.0 but sw rev check fail device 5 binary 3 error.
Is there anyway to handle this problem?
Thanks
Click to expand...
Click to collapse
Probably you want to downgrade the bootlader. If the firmware is A310FXXU2**** you can't downgrade. If the firmware is A310FXXU3**** you can downgrade. https://www.sammobile.com/firmwares/galaxy-a3-/SM-A310F/SER/download/A310FXXU3BQD2/132023/
Flash this.

phonezandmore said:
Hello,
my son has a samsung a3 2016 and unfortunately he made a hard reset and now can't remember the google account info. To bypass it i wanted to downgrade it to 6.0 from 7.0 but sw rev check fail device 5 binary 3 error.
Is there anyway to handle this problem?
Thanks
Click to expand...
Click to collapse
There is already an XDA thread on this:
https://forum.xda-developers.com/samsung-a-series/help/a310f-downgrade-nougat-mm-losing-app-t3666281

●CaloMarzi● said:
Probably you want to downgrade the bootlader. If the firmware is A310FXXU2**** you can't downgrade. If the firmware is A310FXXU3**** you can downgrade.
Flash this.
Click to expand...
Click to collapse
Thank you man. It is done

phonezandmore said:
Thank you man. It is done
Click to expand...
Click to collapse
Nope,i like help people if i can

●CaloMarzi● said:
Nope,i like help people if i can
Click to expand...
Click to collapse
Can you please tell me how can we know if we can downgrade a firmware or not. Additional info is always welcome

phonezandmore said:
Can you please tell me how can we know if we can downgrade a firmware or not. Additional info is always welcome
Click to expand...
Click to collapse
You can downgrade a firmware is the firmware has U3 bootloader. For example A310FXXu3CQI2. If the firmware is A310FXXu2**** you can't downgrade.

●CaloMarzi● said:
You can downgrade a firmware is the firmware has U3 bootloader. For example A310FXXu3CQI2. If the firmware is A310FXXu2**** you can't downgrade.
Click to expand...
Click to collapse
is it same for all samsung phones? or just a3?

phonezandmore said:
is it same for all samsung phones? or just a3?
Click to expand...
Click to collapse
All Samsung phones if samsung had update bootloader for * phone

Hello ! how can me change binary a firmware , it is possible?

hey man i have Samsung Galaxy A5 2016(SM-A510F), i have tried lots of custom roms but now i want to go back in a stock firmware. i have currently installed " VIR-A510FXXU7CRK1 " firmware but in that firmware i get update from software update but i can't install it plzz help me to find me a better firmware for my SM-A510F.
and one more query is that can i install A510FXXS8CSF3 instead of VIR-A510FXXU7CRK1 or any other firmware wich is like A510FXXS8 or A510FXXS7 or A510FXXU8 or anyone??
and i think 2 or 3 month before i got my phone got frp lock and at that time i have install XEU-A510FXXS6CRI5 this firmware and it works good i get regular updates and it can easy install updates so can i get any chance to install
XEU-A510FXXS6CRI5 again because i triied it but it shows device 7 binary 6
plzzzzzz ans me as earlier you can.
plzzz help me and ans me..:crying::crying::crying:

NeelGohel said:
hey man i have Samsung Galaxy A5 2016(SM-A510F), i have tried lots of custom roms but now i want to go back in a stock firmware. i have currently installed " VIR-A510FXXU7CRK1 " firmware but in that firmware i get update from software update but i can't install it plzz help me to find me a better firmware for my SM-A510F.
and one more query is that can i install A510FXXS8CSF3 instead of VIR-A510FXXU7CRK1 or any other firmware wich is like A510FXXS8 or A510FXXS7 or A510FXXU8 or anyone??
and i think 2 or 3 month before i got my phone got frp lock and at that time i have install XEU-A510FXXS6CRI5 this firmware and it works good i get regular updates and it can easy install updates so can i get any chance to install
XEU-A510FXXS6CRI5 again because i triied it but it shows device 7 binary 6
plzzzzzz ans me as earlier you can.
plzzz help me and ans me..:crying::crying::crying:
Click to expand...
Click to collapse
Please show us your download mode screen. ( just take photo if it and post here )
Regards

Rattanak said:
Please show us your download mode screen. ( just take photo if it and post here )
Regards
Click to expand...
Click to collapse
XDA is not allowing me to post oursid link for my img. it says that after 10 posts i can upload outside img url can we discuss this topic on mail or whatsaapp plzzzzzz

Send me PM of the link.. i think they should allow.
or if it still not allow. send me your number on PM and i'll add you up.
i will reply here if i have solution
Regards

My phone is j7 pro sm-730f-d/s.i installed to it j7 binary5 firmware.(9.0)now touch is no working.how to solve this issue

Hello i have a samsung galaxy s9-g960f with binary 17 i think, odin says device 17 binary 2 (or whatever i want to flash). Is there any way to downgrade it to binary u2?

Samsung's downgrade lock is an insult to users. The blatant destruction of the device is a mockery of the user's intelligence and an abandonment of Samsung's reputation.

T580 Downgrade to 6.0.1

hi
I update my galaxy tab A t580 to 7.0 but I do not like it...
I want to downgrade to 6.0.1 but I get this message "sw rev check fail device 2 binary 1"
currently I flash this rom (T580UEU2BQF1_T580XAC2BQF1_XAC) "witch is 7.0 then I root successfully.
I search and found that there is lock in bootloader .
can I bypass (as root) and downgrade
can I make a flash-able stock rom by twrp
regards

msh2050 said:
hi
I update my galaxy tab A t580 to 7.0 but I do not like it...
I want to downgrade to 6.0.1 but I get this message "sw rev check fail device 2 binary 1"
currently I flash this rom (T580UEU2BQF1_T580XAC2BQF1_XAC) "witch is 7.0 then I root successfully.
I search and found that there is lock in bootloader .
can I bypass (as root) and downgrade
can I make a flash-able stock rom by twrp
regards
Click to expand...
Click to collapse
Wifi models don't have locked bootloader but LTE models do.
Downgrade firmware to Android 6, you need a version closed to the release of Android 7. It will fail if you're flashing older firmwares.
I have no problem of downgrade from QF1, Android 7 to PL4, Android 6 ( US firmware ).
You can try this one, region doesn't matter.
https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T580/XAR/download/T580UEU2APL4/127628/

Beut said:
Wifi models don't have locked bootloader but LTE models do.
Downgrade firmware to Android 6, you need a version closed to the release of Android 7. It will fail if you're flashing older firmwares.
I have no problem of downgrade from QF1, Android 7 to PL4, Android 6 ( US firmware ).
You can try this one, region doesn't matter.
https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T580/XAR/download/T580UEU2APL4/127628/
Click to expand...
Click to collapse
Thanks.
It worked for me.

Beut said:
Wifi models don't have locked bootloader but LTE models do.
Downgrade firmware to Android 6, you need a version closed to the release of Android 7. It will fail if you're flashing older firmwares.
I have no problem of downgrade from QF1, Android 7 to PL4, Android 6 ( US firmware ).
You can try this one, region doesn't matter.
https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T580/XAR/download/T580UEU2APL4/127628/
Click to expand...
Click to collapse
I have SMT580 also but the build number is U3BRF1 plsanyway to downgrade it to Android 6???
the same model with build number U2xxx doesnt have this problem!

Jasmin74 said:
I have SMT580 also but the build number is U3BRF1 plsanyway to downgrade it to Android 6???
the same model with build number U2xxx doesnt have this problem!
Click to expand...
Click to collapse
It seems you have the latest United Kingdom firmware, unfortunately this one blocks any downgrade attempt, even to the older Nougat versions
---------- Post added at 03:04 AM ---------- Previous post was at 02:15 AM ----------
Try this one, I personally have not tested it yet, but will try this weekend
https://pangu.in/nougat-7-1-1-7-0-7-1-2-frp-unlock/

Beut said:
It seems you have the latest United Kingdom firmware, unfortunately this one blocks any downgrade attempt, even to the older Nougat versions
---------- Post added at 03:04 AM ---------- Previous post was at 02:15 AM ----------
Try this one, I personally have not tested it yet, but will try this weekend
https://pangu.in/nougat-7-1-1-7-0-7-1-2-frp-unlock/
Click to expand...
Click to collapse
Did it work?

Nope, this build doesn’t work with Talkback method, however the calculator can use to open USB setting, I haven’t found a way to open Chrome

Beut said:
Nope, this build doesn’t work with Talkback method, however the calculator can use to open USB setting, I haven’t found a way to open Chrome
Click to expand...
Click to collapse
Have you tried the one ending in PL4 that can be found here https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T580/XAR/

not worked. any othe advice
lewmur said:
Have you tried the one ending in PL4 that can be found here https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T580/XAR/
Click to expand...
Click to collapse
it dosn't work. any othe advice?

Downgrade is obsolete method, Android 7 and 8 can bypass easily, you need to read other posts

Beut said:
Downgrade is obsolete method, Android 7 and 8 can bypass easily, you need to read other posts
Click to expand...
Click to collapse
i am new here and bought a t585 lte with oreo. as far as i read the threads there are problems with lineageos 14. but right now it works besides the screenlock problem. is there any known and working solution?

how to downgrade from official 8.0 to 7.0

i am on oreo official uk one but now i want to go back to my indian 7.0 firmware because of volte problem in btu so plzz help me and tell me the best way..without harming my device 935fd.
or can i flash 935fd india G935FXXS2DRCG noguat on
on uk G935FXXU2ERE8 ?

give me in private your serial number ,I will tell you wich rom its stock for your device...and I give you an advice,download the firmware using www.updato.com its more faster and you will find all firmwares for your device

Astra441 said:
i am on oreo official uk one but now i want to go back to my indian 7.0 firmware because of volte problem in btu so plzz help me and tell me the best way..without harming my device 935fd.
or can i flash 935fd india G935FXXS2DRCG noguat on
on uk G935FXXU2ERE8 ?
Click to expand...
Click to collapse
Download samfirm from here :
https://forum.xda-developers.com/attachment.php?attachmentid=3803841
Enter your model no. example SM-G935F
And region code: INS
And click check for updates, it will check for latest version available for your region. Then proceed to download.
If samfirm gives some error codes, then I guess you have to use updato or sammobile. Here is the link for updato https://updato.com/firmware-archive-select-model?record=C97F8A453DF911E89F15FA163EE8F90B
Sent from my S7 Edge using XDA Labs

shah22 said:
Download samfirm from here :
https://forum.xda-developers.com/attachment.php?attachmentid=3803841
Enter your model no. example SM-G935F
And region code: INS
And click check for updates, it will check for latest version available for your region. Then proceed to download.
If samfirm gives some error codes, then I guess you have to use updato or sammobile. Here is the link for updato https://updato.com/firmware-archive-select-model?record=C97F8A453DF911E89F15FA163EE8F90B
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
mate i want to know like i am on oreo stock firmware from uk but now i want to go ins firmware but in ins 7.0 is latest so if i downgrade from oreo to noguat is my phone get brick or in bootloop or odin give error bootloader one thats all because i can downgrade only u2 to u2 or u1 to u2 but not u2 to u1 but in ins firmware there is s2 not u2 thats why...
And i Flashed the 935f firmware on my 935fd model

Astra441 said:
mate i want to know like i am on oreo stock firmware from uk but now i want to go ins firmware but in ins 7.0 is latest so if i downgrade from oreo to noguat is my phone get brick or in bootloop or odin give error bootloader one thats all because i can downgrade only u2 to u2 or u1 to u2 but not u2 to u1 but in ins firmware there is s2 not u2 thats why...
Click to expand...
Click to collapse
You know I would have never advised anyone if I haven't tested myself. You can flash without any issues, but nougat will seem much laggy, don't know why. I just experienced it after downgrading that last nougat release for my region was much laggy then it was before I upgraded to oreo. But it may just be my imagination because oreo is more responsive and faster than nougat.
Nope S2 won't hurt. The thing is that the number after alphabet is same i.e 2. S2 is update from U2. 2 must be same. Also firmware is same for both F and FD models.
Sent from my S7 Edge using XDA Labs

shah22 said:
You know I would have never advised anyone if I haven't tested myself. You can flash without any issues, but nougat will seem much laggy, don't know why. I just experienced it after downgrading that last nougat release for my region was much laggy then it was before I upgraded to oreo. But it may just be my imagination because oreo is more responsive and faster than nougat.
Nope S2 won't hurt. The thing is that the number after alphabet is same i.e 2. S2 is update from U2. 2 must be same. Also firmware is same for both F and FD models.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
thanks i try but did i need to on oem unlock or not.

Astra441 said:
thanks i try but did i need to on oem unlock or not.
Click to expand...
Click to collapse
Yes always enable oem unlock, just in case you may need to flash custom recovery or root, just to be safe its good thing to always keep oem unlock enabled.
Sent from my S7 Edge using XDA Labs

shah22 said:
Yes always enable oem unlock, just in case you may need to flash custom recovery or root, just to be safe its good thing to always keep oem unlock enabled.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
everything oke but i can't make call even volte showing i can't make call even not reciving the msg also only net working...

Astra441 said:
everything oke but i can't make call even volte showing i can't make call even not reciving the msg also only net working...
Click to expand...
Click to collapse
Ain't happened with me, try changing your sim card. It isn't your phone's fault. If its registering network properly, then there is no issue with phone.
Sent from my S7 Edge using XDA Labs

my problem solved thanksss

please help me i have failed to downgrade back to 7.0 from 8.0 . phone model G935F
i want to downgrade because i lost network in upgrade and IMEI in service mode says status: NG

FRUMENCE said:
please help me i have failed to downgrade back to 7.0 from 8.0 . phone model G935F
i want to downgrade because i lost network in upgrade and IMEI in service mode says status: NG
Click to expand...
Click to collapse
mate make sure ome unlock is enable then use latest 7.0 of ur region make sure its u2 not u1 then use latest odin 13.1 to flash...

Astra441 said:
mate make sure ome unlock is enable then use latest 7.0 of ur region make sure its u2 not u1 then use latest odin 13.1 to flash...
Click to expand...
Click to collapse
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
---------- Post added at 10:06 PM ---------- Previous post was at 09:50 PM ----------
FRUMENCE said:
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
Click to expand...
Click to collapse
update; the U2 firmware worked now the next thing is how do i repair my IMEI and get network back?
any help ?

FRUMENCE said:
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
---------- Post added at 10:06 PM ---------- Previous post was at 09:50 PM ----------
update; the U2 firmware worked now the next thing is how do i repair my IMEI and get network back?
any help ?
Click to expand...
Click to collapse
Try this https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516/
Sent from my S7 Edge using XDA Labs

shah22 said:
Try this https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516/
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
!!!!WARNING!!!!!! TOO LONG!!
Thank you for your help but this post did not work for me. After downgrading and trying many times to get imei i flashed the FACTORY BINARY but nothing i had lost modem and did not have baseband and NVDATA.
so with my heart rate @ a billion beats/sec with thoughts of i had bricked my phone. i clam down and started trouble shooting one by one .
At this point modem was undetected odin would fail to flash any firmware.
so i downloaded latest firmware 8.0. lucky it flashed and removed the FACTORY BINARY now back to stock 8.0 with no baseband and modem firmware. I did the following;
1. Flashed latest TWRP via Odin.
2.Formatted DATA then reboot back to TWRP (more drama ) your likely to face DM verify issue like i did here flash CF auto for android 7.0 but it wont give you root for some reason.
3.back to TWRP flash SuperSu for s7edge(SR1-supersu)
4.download the NVDATA,modem,and EFS for your device google search should yield.
5.flash NVDATA,modem and EFS. then factory reset the phone in TWRP
7.wait for many dramatic reboots,(reroot if you lost root)
8. then download and install ROOT BROWSER
still no network in my case at this point. i waited 20mins.
9.browse to the EFS folder in root. delete everything except **FACTORY APP**and **PROV-DATA**
10.do a full reboot
11.if no network like me, go to TWRP and factory reset.
12.sit back sip coffee and wait..
THIS IS WHAT WORKED FOR ME (G935F) i have since flashed back stock rom and rerooted and i have not lost IMEI again am now running a custom rom since 3hours ago still IMEI and network is strong. BE CAREFUL NOT TO BRICK YOUR PHONE I AM NOT RESPONSIBLE. DO AMPLE RESEARCH BEFORE ATTEMPTING THIS METHOD MAKE SURE ALL FILES ARE FOR YOUR DEVICE. ALWAYS KEEP LATEST STOCK ROM WITH YOU.

Could you tell me which rom should I flash on s7 edge locked to three UK? I bricked my phone. Don't have backup.
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Don't have a backup. G935F on three UK. G935FXXS2DRA9 is what sammobile shows. But due to a scam on their website I can't create an account for 'free' download. Could you send a link with another download? Thanks

Vitfit83 said:
Could you tell me which rom should I flash on s7 edge locked to three UK? I bricked my phone. Don't have backup.
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Don't have a backup. G935F on three UK. G935FXXS2DRA9 is what sammobile shows. But due to a scam on their website I can't create an account for 'free' download. Could you send a link with another download? Thanks
Click to expand...
Click to collapse
Use SamFirm to download firmware. Works great for me. I get full download speed.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
You can use any CSC code firmware, I don't know what your one came with. Could be any one of these:
http://prntscr.com/juh609
http://prntscr.com/juh7lq

benjamen50 said:
Use SamFirm to download firmware. Works great for me. I get full download speed.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
You can use any CSC code firmware, I don't know what your one came with. Could be any one of these:
http://prntscr.com/juh609
http://prntscr.com/juh7lq
Click to expand...
Click to collapse
I have a firmware but can't flash BL file in odin. All the rest of the files like csc, cp, ap, home work. Only bl doesn't. Message on the phone is sv. rev check fail.

Vitfit83 said:
I have a firmware but can't flash BL file in odin. All the rest of the files like csc, cp, ap, home work. Only bl doesn't. Message on the phone is sv. rev check fail.
Click to expand...
Click to collapse
Thats because you were flashing older bootloader version on a newer bootloader..
Download this https://updato.com/firmware-archive-select-model?record=6CF8552A10BC11E89F15FA163EE8F90B
Flash it using odin 3.13.1 , also be sure to use CSC file and NOT the home_CSC..

shah22 said:
Thats because you were flashing older bootloader version on a newer bootloader..
Download this updato.com/firmware-archive-select-model?record=6CF8552A10BC11E89F15FA163EE8F90B[/url]
Flash it using odin 3.13.1 , also be sure to use CSC file and NOT the home_CSC..
Click to expand...
Click to collapse
I was able to bring my s935f to life but unfortunately imei and signal is gone... Now, the fact is that I had same situation with my note5 in the past and...…. have given up due to lack of ideas how to fix such complicated thing like bringing back imei. Have tried all apps from play store-/rubbish. Even today I still have that motherboard in my drawer.
BUT s7 edge looks so great that I would take a chance to fix it if anyone my kind members could provide me with instruction explaining how to do this on basic knowledge level.
I know how to flash rom using Odin., how to install usb drivers, unlock oem, usb debugging,, how to flash twrp, root the phone...… but I struggle with the knowledge about 'pit file' (what the heck is that? because my odin 3.13.1 doesn't have pit file slot which I have seem on youtube movie....) ,I am confused with the fact that I can flash let say csc ,file in AP slot in din? Ums, …. Anotherwords wouldn't be a HUGE PROBLEM if the steps given on youtube or google work!!! But they don't!!! I mean my note5 here. So I am fully aware that simple looking instruction may bring a lot of hidden problems such as 'your rom flashed ok on youtube but my exactly the same phone and rom faild…. and now the Game starts when you read on google multiple solution and non of them work for you because you missed some small detail that wasnt mentioned in the movie because that was so obvious to creator. Looking back on my previous playing with roms I can say that IS ALWAYS SOMETHING ………. so I expect a lot of stress.
If YOU know or did it before how to make my phone great again, tell me please. Otherwise this pretty beast will end up mining electroneum.... Thanks

Having Trouble Reverting G892A (GS8 Active) to Stock

Hello all,
I recently purchased a Galaxy S8 Active (AT&T). It was on a stock firmware out of the box. I found an XDA thread with a rooted G892A ROM, and I attempted to install it. I must have done something incorrectly, because the phone would no longer boot. I researched how to use Odin to flash the phone back to the stock firmware but was not able to complete that process.
This is what my phone shows during the download mode flashing process: https://imgur.com/BjhUoXb
- If you look at the last line, it says: "SW REV CHECK FAIL : [abl]Fused 4 > Binary 3"
This is the message that Odin fails on each time when flashing the stock firmware: "abl.elf, FAIL! (Auth)"
How I can get this phone back to stock firmware?
Thanks!

mekkelrichards said:
Hello all,
I recently purchased a Galaxy S8 Active (AT&T). It was on a stock firmware out of the box. I found an XDA thread with a rooted G892A ROM, and I attempted to install it. I must have done something incorrectly, because the phone would no longer boot. I researched how to use Odin to flash the phone back to the stock firmware but was not able to complete that process.
This is what my phone shows during the download mode flashing process: https://imgur.com/BjhUoXb
- If you look at the last line, it says: "SW REV CHECK FAIL : [abl]Fused 4 > Binary 3"
This is the message that Odin fails on each time when flashing the stock firmware: "abl.elf, FAIL! (Auth)"
How I can get this phone back to stock firmware?
Thanks!
Click to expand...
Click to collapse
You will need the flash version 4 firmware on your device. It"s the 5th digit from the right of the firmware that you downloaded. My firmware is G950FXXU4DSDA so the number 4 ( from the right ) is my version number. You can not download grade to a previous when number.

spawnlives said:
You will need the flash version 4 firmware on your device. It"s the 5th digit from the right of the firmware that you downloaded. My firmware is G950FXXU4DSDA so the number 4 ( from the right ) is my version number. You can not download grade to a previous when number.
Click to expand...
Click to collapse
Do you have any idea on where to find that firmware for the AT&T S8 Active?
I've scoured the web.

mekkelrichards said:
Do you have any idea on where to find that firmware for the AT&T S8 Active?
I've scoured the web.
Click to expand...
Click to collapse
You can used sammobile or updato ( website ) or samfirm or friga ( app for PC ).
These first two website will completes firmware for your phone.
The other two will download the latest firmware your for phone.

spawnlives said:
You can used sammobile or updato ( website ) or samfirm or friga ( app for PC ).
These first two website will completes firmware for your phone.
The other two will download the latest firmware your for phone.
Click to expand...
Click to collapse
Have you ever found G892A firmware on either sammobile or updato?! I've only ever seen Tmobile and Sprint firmwares...
---------- Post added at 08:09 AM ---------- Previous post was at 08:08 AM ----------
mekkelrichards said:
Do you have any idea on where to find that firmware for the AT&T S8 Active?
I've scoured the web.
Click to expand...
Click to collapse
This thread https://forum.xda-developers.com/galaxy-s8/how-to/sm-g892a-galaxy-s8-active-stock-odin-t3667204 is the only place I've ever found ATT firmware updates for G892A.