S7 Edge just run in download mode/ twrp stuck at first screen - Samsung Galaxy S7 Edge Questions and Answers

Hi guys, I was trying to restore the stock firmware on s7 edge but I don't know exactly went wrong but right now I'm able only to put the phone in downloade mode and anything else.
And sorry for my bad, bad english.
First of all, I flashed the black peark about 6 months ago and I was just trying to remove by flashing the stock oreo firmware via odin but i was stuck at “SetupConnection” so (after that i saw the black pearl has been updated so i try to install it again) I tried booting into twrp and wipe all the partition but I was getting the error “Unable to mount partition”, what I think just broke my twrp is that to get rid of that message I tried to change the partition file system of data to ext2 (in this way I thought i could have got back in ext4). The last 2 lines were ”formattin…” and “done” but nothing happened and when my phone rebooted i was unable to do anything except going in download mode.
Please Help, I need to get my phone back to life.

Re-flash
You might need to re-flash a ROM to your device using ODIN and if you're going to root then make sure that you use the Samsung AntiRoot Removal Kit. It seems that you messed up somewhere along the line and need to start from scratch. If you get stuck and require help, just let me know. I am no expert but I'm here to help others.
Snake_NG said:
Hi guys, I was trying to restore the stock firmware on s7 edge but I don't know exactly went wrong but right now I'm able only to put the phone in downloade mode and anything else.
And sorry for my bad, bad english.
First of all, I flashed the black peark about 6 months ago and I was just trying to remove by flashing the stock oreo firmware via odin but i was stuck at “SetupConnection” so (after that i saw the black pearl has been updated so i try to install it again) I tried booting into twrp and wipe all the partition but I was getting the error “Unable to mount partition”, what I think just broke my twrp is that to get rid of that message I tried to change the partition file system of data to ext2 (in this way I thought i could have got back in ext4). The last 2 lines were ”formattin…” and “done” but nothing happened and when my phone rebooted i was unable to do anything except going in download mode.
Please Help, I need to get my phone back to life.
Click to expand...
Click to collapse

Related

[Q] GT-i9500 has no OS installed.

Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Well first thing is get the latest stock firmware for your variant from my sign and get odin 3.07
For download mode power off phone unplug,, press volume down home and power all together till something pops up and release then press volume up and connect to pc
Open odin click pda and select that firmware u downloaded start the process
For more info check my sign help thread link it has more options on the same
.
JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Flashing through odin is one option.... some users have reported that there were some hiccups when installing omega 14 because of the aroma script.....try a different rom...there are many others to choose from....or you could flash stock via odin as said on the earlier comment good luck
Feedback
Today I attempted to use ODIN to flash now I am still currently attempting this. When I press the volume down key, power, and home button it takes me to the custom recovery TWRP instead of download mode. The phone did this when I first purchased it. When I still had what appeared to be the stock rom it would always take me to the recovery. When I would use the volume up instead of down it would take me to the factory test mode now mind you this happened when the OS was still installed. When i try that combination now i just receive a blank black screen. Are there any other ways to boot into download mode?

I think my partitions are all messed up. Please Help

Hey everyone. I recently gave my Rogers note 3 to my wife. two days later she said it was acting up, and it kept saying com.android.systemui has stopped. when I booted into CWM I couldnt do a factory reset, and it was also saying it could open a bunch of directories. I was able to use CWM to restore to an earlier restore, but even then I couldnt do a factory reset, and CWM is still saying it cant open the directories.
After talking with another modder, he has suggested that my partitions are messed up. So, if this is the case, what is my best bet? should I use odin to reflash CWM, and then flash the stock rogers rom? She's not a power user and doesnt care for root. she just wants a working phone that has a stylus pen.
I have downloaded the latest CWM .tar, but can someone please help me find the stock rogers rom? rooted or not, i dont care. I just need help as Im helping her recover from major surgery and working 18 hour days right now so im burnt out.
Thanks in advance.
[SOLVED]
I was able to format the cache from CWM finally. Errors are all gone.

N910F problems - emmc read fail/ flashing stock no longer boots the phone.

Hello. I had gotten this Note 4 phone which had a custom recovery installed on it but the rom seemed to be official, on 5.1
The first thing I did was go to samfirmware and flash a 6.0.1 rom, it went fine, phone was working properly. Then I got greedy and wanted to test a Note 7 ported rom. Flashed TWRP recovery and from within I flashed RamROM http://forum.xda-developers.com/note-4/snapdragon-dev/rom-sm-n910g-ramrom-t3400349 , I downloaded the one from post#2 , the N910F one that my phone is and after it flashed to ROM it simply stopped working. My phone no longer booted, was booting me directly into Download mode with emmc read error. I kept trying to flash the stock rom which I previously flashed and it would fail.
Afterwords I used Smart Switch to reinitialize the phone, writing my phones S/N and that failed as well but at least that made my phone boot into a different recovery where it said to connect to Kies. Once again I used Smart Switch and this time it was successful 100%. My phone even booted into the OS and was working, however, while using it, after 10 minutes the phone restarted into Download mode with emmc read error.
So all in all the phone is functional but it starts to lag and restart. Now I'm kinda stuck again since I've tried to flash the firmware I got from Samfirmware through Odin, it succeded but it just doesn't boot, it goes to Recovery, tries to apply an update and I get an error.
Is there anything I can do? I can't believe the emmc could've broken just from trying to flash that custom rom, especially that afterwards I was even able to boot into the phone.
Thanks for reading and I appreciate the help.
engwee said:
Hello. I had gotten this Note 4 phone which had a custom recovery installed on it but the rom seemed to be official, on 5.1
The first thing I did was go to samfirmware and flash a 6.0.1 rom, it went fine, phone was working properly. Then I got greedy and wanted to test a Note 7 ported rom. Flashed TWRP recovery and from within I flashed RamROM http://forum.xda-developers.com/note-4/snapdragon-dev/rom-sm-n910g-ramrom-t3400349 , I downloaded the one from post#2 , the N910F one that my phone is and after it flashed to ROM it simply stopped working. My phone no longer booted, was booting me directly into Download mode with emmc read error. I kept trying to flash the stock rom which I previously flashed and it would fail.
Afterwords I used Smart Switch to reinitialize the phone, writing my phones S/N and that failed as well but at least that made my phone boot into a different recovery where it said to connect to Kies. Once again I used Smart Switch and this time it was successful 100%. My phone even booted into the OS and was working, however, while using it, after 10 minutes the phone restarted into Download mode with emmc read error.
So all in all the phone is functional but it starts to lag and restart. Now I'm kinda stuck again since I've tried to flash the firmware I got from Samfirmware through Odin, it succeded but it just doesn't boot, it goes to Recovery, tries to apply an update and I get an error.
Is there anything I can do? I can't believe the emmc could've broken just from trying to flash that custom rom, especially that afterwards I was even able to boot into the phone.
Thanks for reading and I appreciate the help.
Click to expand...
Click to collapse
read this - http://forum.xda-developers.com/note-4/help/note-4-issues-t3453048
there are links to more threads related to your issue.
Short version though:
it is dying. install wake lock application, add it to start up and set settings to #4.
accept the fact that your phone will eat the battery faster and one day WILL die completely
Thanks for your response. Regarding the Wake lock application, I'm starting to look into it, I asume I'll have to be rooted. I'll try to recover it again using Smart Switch and then I can only hope I can install TWRP and still have it functional.
Previously when I was able to get it working with Smart Switch, entering the recovery messed everything up. It said it was applying an update and that got stuck.
engwee said:
Thanks for your response. Regarding the Wake lock application, I'm starting to look into it, I asume I'll have to be rooted. I'll try to recover it again using Smart Switch and then I can only hope I can install TWRP and still have it functional.
Previously when I was able to get it working with Smart Switch, entering the recovery messed everything up. It said it was applying an update and that got stuck.
Click to expand...
Click to collapse
no need to be rooted, just download, install and set it to autostart
I'll try it if I somehow manage to get the phone working again, Smart Switch just fails now midway through.
golden_m said:
no need to be rooted, just download, install and set it to autostart
Click to expand...
Click to collapse
Is this the app you're talking about? https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en
What exactly does it do?
I managed to restore it eventually with Smart Switch, it took quite a few tries, then I switched to my Macbook when I saw the app was available on it too and the 3rd try succeded. I only did it because I saw the 2nd try had the % much higher than the first.
engwee said:
Is this the app you're talking about? https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en
What exactly does it do?
I managed to restore it eventually with Smart Switch, it took quite a few tries, then I switched to my Macbook when I saw the app was available on it too and the 3rd try succeded. I only did it because I saw the 2nd try had the % much higher than the first.
Click to expand...
Click to collapse
yes, that is the app.
i've read it does not allow your phone to go to sleep mode.
drains the battery faster, but this is the only way to keep note 4 working without swapping its motherboard...
I have a question, my gf recently bought a note 4 and we may swap our phones and if we do, i'll flash CM and tinker with it because i find this phone very interesting, just a question, does this bug affect the N910C (exynos) model? Do i have something to worry about? Because the phone is warrianty protected and if it's the case, i don't want to break it. I hope someone will shed some light on this

Can I flash stock recovery back?

Hi Guys,
Hoping someone can help and tell me that Ive not bricked my brand new S7 edge
I have experience in rooting / flashing a number of android devices so I was quite confident in what I was doing.
So I was trying to root my stock rom, I flashed TWRP using Odin which worked fine then I flashed the Super SU. When I booted it then asked for a PIN to boot, it definitely wasn't what I set and would have only set it to 1 thing. So I did some googling and found that I could clear data or remove the pin key files but in TWRP it couldnt mount data and I tried re-formatting but it sat there for over half an hour and I had to hard reboot. TWRP now just freezes at the splash screen during boot which confuses me cause even if I switched off during re-formatting, I was only on the userdata so surely that shouldnt affect TWRP? I then got to the stage where I thought entering the max PIN attempts would just wipe data but no it tried to boot into TWRP which is useless cause it doesnt get past the splash screen.
I can still get into Odin mode, is there something else I can try flash? I had tried reflashing TWRP before but it was still freezing at the splash screen
I thought of maybe wiping data over adb but I dont think I can do that unless the phone boots or gets fully into TWRP?
Any help much appreciated.
Thanks
Stewart

My rooted samsung galaxy s4 is soft bricked, Can I save the data?

Yes this post is correctly dated. I've had this device a LOOOONNNGGG time.
The device has been rooted since shortly after I bought it new years ago. I've had very few problems since... which is why it's never been replaced.
I believe I have the stock ROM, sorry it's been a while.
When I start the device it gets stuck at the splash screen with the sprint logo.
I can get the device to "download mode" but I don't know what to do once there and I'm not sure I can do anything from here.
I can get the device to "android system recovery."
I know I installed TWRP when I rooted and installed the rooted ROM but when I boot to recovery it doesn't go there.
I've wiped the "cache partition" but the problem remained. I'm not sure what else to do from here and still be able to salvage data.
I'm trying to salvage the data on the internal storage. I'm pretty sure I could successfully "wipe data/ factory reset" and get it to "function" again but that's not the priority. I'm going to replace it regardless of success or failure. Data recovery is the priority here. (pictures and videos of my young children as well as less important stuff like contacts.)
I have an old laptop with an old version of ubuntu I can use or a newer one with windows 7 to work with. I mention this in case it makes this easier to help?
Thank you very much if you try to take a stab at this or refer someone that might!
Update:
So I managed to install TWRP via Odin.
I booted to this recovery and my data partition appears to be empty?
When I try to back up I get the error message "unable to mount '/data'"
I tried doing a wipe, not one of the fancy extra options ones just the regular wipe and it failed.
Any guidance will be extremely appreciated.
Edit:
So I've come to the conclusion that the data isn't accessible because of encryption and my pass code. Is there any way to enter it via recovery and access this info?
Is anybody out there?
Edit 2:
I hope this helps someone someday. I haven't solved the problem but I think I'm making progress.
First I had an old version of TWRP. I installed the latest for my device and tried backing up again. I'm not sure but I think it's working. TWRP dosen't seem to need my password for the backup. I imagine I'll just need it to access the data later.
Edit 3:
No sooner did I save the last edit and my backup failed.
Process ended with error : 255

Categories

Resources