This is quite a long story. So I decided to flash twrp on my s7 edge (exynos) and root it with magisk. everything was working fine until i decided to turn off the oem lock and then restart the phone. as soon as the phone booted up, it shows the error "custom binary blocked by frp lock" and then automatically shuts down. I searched up the issue online and it told me that i should reflash my stock firmware and so i did.
1st error:
odin fails in flashing stock.
i tried to unplug the wire and retry and i get stuck on the "setup connection" part.
2nd error:
since it got stuck on the setup connection part, i tried to unplug it to try and restart the process but it did me no good. now the device says "An error occurred while updating the device software. Use the Emergency restore function in smartswitch pc program"
3rd error:
so i tried to use the smartswitch program but it says that my device is not supported and so im stuck to the 2nd error.
Please help. I tried reflashing stock firmware using odin and it still wont work (odin keeps failing). now the device only shows the 2nd error mentioned above and wont shut down unless it runs out of battery.
for additional info, this is the log of my odin:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3943 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(i tried to click start again and then odin gets stuck here)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3943 M
<ID:0/005> SetupConnection..
Related
I have got a hold of a demo unit (gt-19505x) and wanted to flash it to a standard firmware. So i choosed
hxxp://sammobile.c0m/firmwares/1/?model=GT-I9505&pcode=VDS
When in odin i get this error message:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So i wonder if anyone have any experience with flashing demo units. Is this error caused to wrongly chosen rom or a corrupt file? Or can't the demo phones be flashed?
Is there any demo unit room out there that i can try to flash with, because now the phone gets stuck at the splash screen when i try to boot it.
EDIT:
I managed to boot it, was stuck along time on the splash screen tho, the downside is that wi-fi is'nt working. But i can tether via bluetooth from my SII.
Under device status it says its custom so i guess i can "update" the firmware via "software update".
But when it checks for a new version it starts by "registering device..." then i get an error saying "Processing faile" even tho i'm logged in with my samsung account.
Is this because im not on wi-fi and it will only scan for updates if im on wi-fi?
any luck ?
Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair
Hey Guys,
I have no clue what happened, Phone is stuck in ODIN Mode,
I am in odin 3.09, downloaded the pit file and the latest MJE firmware and i get to this step.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help a lost soul...
Justin
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
I did the pit file, not it stays locked at Samsung Galaxy Note 3 screen.
2swizzle said:
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
Click to expand...
Click to collapse
Pit File - HLTE_USA_VZW_32G.PIT
PDA - MI9/MJ7/MJE (none work)
I am running odin as an administrator. I just can't get this thing to download to the phone... am i doing something wrong..
I put the phone in download mode.
Ive Done :
Download the MJE Stock Firmware 1.3 GB and extract it once...
Download latest ODIN 3.09...
In your device go into Download mode(Vol Down+Home Button+Power Button) and again Volume Up for Download mode...
Right click ODIN and open as administrator...
Now connect your device to PC and check the status in ODIN as Connected... (COM 5)
Make sure that only Auto Reboot and F.Reset Time are checked in ODIN...
Click on AP and select the extracted file from MJE firmware...
After checking the MD5 file...Click on START and wait I get the following error
-<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
is there something I am missing?
Thanks in advance!
Looks like you are trying to install I9 in your second post. Unless you were on i9 to start with you cannot downgrade. At the top of your post you refer to MJE. That is probably the reason.
Sent from my SM-N900V using Tapatalk
ive tried them all.. still no luck... verizon is sending me a new phone... it should load through odin, it doesn't nothing..
Well the issue was I was running ODIN in my VMWare Windows 7 Virtual Machine. I got my new phone today from verizon, for ****s i hooked it up to my old Windows XP machine and it went with out a hitch. I unplugged it was 75% so they can have it showing ODIN MODE..
Thanks for all the help...
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
-----------------------Solved -------------------------------
I tried a new cable and it fixed the issue
i
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
Check this, it seems same issue;
http://forum.xda-developers.com/galaxy-s3/help/nand-write-start-completewrite-t1846867
don't download anything from that thread just read what happened
as one of member mentioned there & Also in ur logs
thr s problem in NAND write operation
SO search "fix NAND Corrupted" or something like this.
i searched little bit but do it urself...
some opinions;
wipe ur phone through recovery (built-in recovery i mean)
and then try again....
:good:
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
First of all I hope for your good that you have usb debugging enabled. Try to right click odin executable and run as administrator. After that restart flashing. It should work. Good luck.
Hiya Guys
Thanks for the advice so far, i have tried running oden as admin since the issue started with oden 3.09 and 3.07
I downloaded a stock firmware over night and received this error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
i have tried holding the power home and up button to get my phone in to recovery but it just goes to the
"firmware upgrade encountered an issue. please select recovery in kies and try again"
screen
I am picking up a new cable today that i hope may fix the issue, i check the forum thread posted but it ended up in the user needing a new phone sadly
Any other thoughts?
Thanks for your time and help so far
Just try the basic stuff:
- Different usb port
- Different pc
- Different cable.
99% of the Odin problems is solved with it.
Thanks for the reply,
I have a different cable to test with when i get home tonight and i can try using my girlfriends laptop as well so thanks for the advice so far
I have a quick question, as i haven't had much trouble routing with the cf auto root i thought maybe i could just put a clean install of stock on my phone to get it working.
I left this firmware "I9505XXUFND7" downloading from sammobile.com before i left for work this morning, i am pretty sure it is correct for my GT-I9505 (no idea what the carrier was as it came unlocked and i am unsure of how to check).
Would anyone be kind enough to confirm this is the correct firmware or if it is wrong let me know which i should be using?
Thanks so much for your help so far people it really means a lot, sorry for the noob questions
Hi guys,
This is just a quick thank you for your help i tried a new cable and the firmware and it fixed the issue
I have a Sprint Note 4 that is currently stuck in a boot loot. I was currently on stock rooted Touchwiz 5.1.1 and used odin to flash stock 5.1.1 (I'm getting rid of the phone). After this I got into a boot loop - it gets to the android logo and vibrates twice then reboots. I can still access TWRP and did a factory restore, with the same results - boot loop. I have updated to TWRP 3.0.2.0.
I again downloaded the stock 5.1.1 firmware and tried flashing with ODIN. Here is the message I get when it fails:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash the rom within TWRP I get the following message:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Could not find 'Meta-INF/com/google/android/update-binary' in the zip file
Error installing zip file
I have redownloaded the zip a couple of times to make sure the download was not bad. I also tried flashing the android 4.4.4 zip with the same problem.
Thanks for any help you might have!
Please, search before post.
Rajada said:
Please, search before post.
Click to expand...
Click to collapse
I truly did. I also tried using every method I found on here. None of them worked however. I tried to be as detailed as I can as well.
Hello World,
Something went wrong when I tried to install Lineage OS on the phone (SM-G9287), so If anyone has any suggestions for how to deal with the below issue, I would greatly appreciate it.
- After installing a set of custom packages (lineage os, custom kernel and permissive boot script) via TWRP recovery, the phone got stuck on the Samsung load screen
- I can access the download mode, which states that FAP LOCK and CROM SERVICE are both OFF
- I can't access recovery mode (it restarts and goes back to the Samsung load screen)
- Flashing CF-Auto-Root image via Odin allows it to boot into the OS on the first boot, but rebooting it afterwards causes the same issue (stuck on Samsung load screen)
- Flashing TWRP recovery doesn't throw up any errors, but doesn't resolve the issue (still can't boot into recovery)
- Flashing stock rom via Odin fails - message on phone screen says SW REV. CHECK FAIL. DEVICE: 4, BINARY: 2 and Odin's message is below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3964 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/INDENT]
Ended up solving this one myself using the 4 file/part approach (flashing AP file only out of the 4).