I have a Sprint Note 4 that is currently stuck in a boot loot. I was currently on stock rooted Touchwiz 5.1.1 and used odin to flash stock 5.1.1 (I'm getting rid of the phone). After this I got into a boot loop - it gets to the android logo and vibrates twice then reboots. I can still access TWRP and did a factory restore, with the same results - boot loop. I have updated to TWRP 3.0.2.0.
I again downloaded the stock 5.1.1 firmware and tried flashing with ODIN. Here is the message I get when it fails:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash the rom within TWRP I get the following message:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Could not find 'Meta-INF/com/google/android/update-binary' in the zip file
Error installing zip file
I have redownloaded the zip a couple of times to make sure the download was not bad. I also tried flashing the android 4.4.4 zip with the same problem.
Thanks for any help you might have!
Please, search before post.
Rajada said:
Please, search before post.
Click to expand...
Click to collapse
I truly did. I also tried using every method I found on here. None of them worked however. I tried to be as detailed as I can as well.
Related
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
ryannnnn said:
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
Click to expand...
Click to collapse
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
urko95 said:
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
Click to expand...
Click to collapse
It's fixed, i flashed CM 10.2 RC2 in CWM it worked, then i flashed 4.3 GP addition and it's fine. WiFi doesnt work but i guess thats a new issue
Thanks!
So when I upgraded to android 4.3 a while ago my phone stopped making and receiving sounds in calls. Weird problem, and I sent the phone out a couple of times to get it fixed and they just replaced the speaker and mic (which did absolutely nothing). Somebody else told me it was a problem with the 4.3 update and to try installing a 4.4.2 ROM, which I did (Gummy 2.1 using the CWM Recovery method). I know, I know, I voided my warranty, but there was only a couple months left and they weren't fixing it. Anyways, after finally upgrading the stupid thing the calls still didn't work! So I'm trying to rollback to 4.2.2 (firmware from sammobile .com), but every time I try with Odin 3.09 it fails. Here's the log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and then the only way to get the phone working again is to use odin to flash the CWM Recovery again. Any idea how to fix this?
Thanks
EDIT: Just thinking, is it possible to use the zip file I downloaded and do the CWM install from zip thingy the way that I installed Gummy 2.1?
Try just flashing the modem from 4.2.2 using twrp/CWM
sent from my mobile device
hi xda world
my gp sm-g530H failed when i try to odin stock rom .
i installed it before and this time couldn't
please help me .
this is download mode fail ..
i coudn't put an image
secure check fail : aboot
and this is odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA3_G530HOJV1AOD1_G530HXXU2ANL4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
now there's an update
i extract stock rom and remove files which fail
they are
aboot.mbn
hyp.mbn
modem.bin
non-hlos.bin
rpm.mbn
sbl1.mbn
sec.dat
tz.mbn
and tar other files :-
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
they are flashed normal and the phone open
but they are some bugs such as wifi dosn't work
pleas help me ...
mohager52 said:
hi xda world
my gp sm-g530H failed when i try to odin stock rom .
i installed it before and this time couldn't
please help me .
this is download mode fail ..
i coudn't put an image
secure check fail : aboot
and this is odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA3_G530HOJV1AOD1_G530HXXU2ANL4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try another com port. (Use another usb slot)
ActivNoiz said:
Try another com port. (Use another usb slot)
Click to expand...
Click to collapse
I do that and so try the official cable and other cables .
mohager52 said:
I do that and so try the official cable and other cables .
Click to expand...
Click to collapse
I think its a problem with drivers....try on another pc. I was same problem with I9070....delete and reinstall drivers no help at all.
i have same problem, i tried flash with cf autoroot. no luck. phone keep restart on boot.
then i flash cwm, and... voillaaaa it work!! :victory: no data on my phone erased. and i dont know why,but my recovery still on stock recovery.
here the link cwm mega*nz/#!SQ8XkIiI!Kj_9rhfVY8bz0nRjZGDGra4Bs3Nen-87O4vhWGHlVzc (change * with . )
I cant seem to unroot my phone at all back to a stock rom. It looks like an authentication problem with knox, but im not sure.
The rom im trying to flash is the I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2.
Ive tried using a pit file before and it ended up soft bricking the phone.
Im really sick of CM13 and 12 and I'd love to get back to stock.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, it says STAT [224,1440]
Enter download mode and read off the model number on the screen please?
The failure after trying to flash aboot.mbn indicates the rom being flashed has an older bootloader than the bootloader currently on the phone. Not sure if your phone has a downgradeable bootloader.
@audit13: I really need to read logs a bit more thoroughly.
That said, I think the bootloader can be downgraded, so long as the replacement has Knox included. I haven't tried it however, so you could just as easily be right.
The bootloader is probably not locked but I don't think a bootloader can be downgraded to 4.3 or older.
Honestly, I can't remember.
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
hawre96 said:
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
Click to expand...
Click to collapse
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
DeadSquirrel01 said:
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
Click to expand...
Click to collapse
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
hawre96 said:
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
Click to expand...
Click to collapse
No problem, I'm happy u solved the problem