I noticed that ATT says the lollipop update for the S5 was pushed on April 8:
https://twitter.com/ATTCares/status/585626764208168961
However, mine still doesn't find any updates. I'm on straight talk with ATT, but I don't think that matters. Have they just not released it and I missed the updated news?
I have a unlocked AT&T s7 edge I bought it refurbished on ebay. I have flashed the SM-G935U firmware but there is no updates yet but when I used a vpn it said I have a update (using an American ip) but I'm in the uk on three what will happen to my device is it a possible nugat update
It's not Nougat, it's either the standard AT&T update from October, about 250mb, or the November patch at 50mb. We're probably at least looking at late February or March for nougat.
Sorry guys, complete amateur here. I have an AT&T S8+ that was unlocked using a code from AT&T.
I switched to T-Mobile and my phone worked perfectly after simply inserting a T-Mobile sim.
Carriers push updates over the air and I assumed I would have put in an AT&T sim to get the oreo update, but it's been out forever and I have not been able to update my phone. I've been busy and never got around to it. My phone was working fine so I just it slide.
I've tried using an AT&T sim. I've restarted my phone with the AT&T sim in it. I've tried manually searching for the update. I've tried smart switch. I even went to the Samsung experience store in NYC and they had no solution. My phone will not update.
Any suggestions?
SM-G955U
Android Version 7.0
Android security patch level April 1st, 2017
Baseband - G955USQU1AQDE
I've been reading some of these threads and I'm not sure if this is correct, but I can use Odin 3.13.1 to flash to CRB9? That would get me to the first Oreo release?
Sorry if this is not the correct place for this thread. Thanks
Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Lavman72 said:
Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Click to expand...
Click to collapse
Are you using an AT&T SIM card? If you purchased an AT&T model AT&T sends OTA updates whether you got it from AT&T or Samsung. If you aren't using an AT&T SIM they won't send you any OTA updates and Samsung only sends OTA updates to the carrier free versions of the phones.
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Lavman72 said:
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Click to expand...
Click to collapse
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
jhs39 said:
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
Click to expand...
Click to collapse
happen to have remember the thread which had the carrier free firmware?
Lavman72 said:
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
Click to expand...
Click to collapse
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
jhs39 said:
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
Click to expand...
Click to collapse
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Newer firmware is all-inclusive so you could download firmware with Frija and flash it with modified Odin even if it isn't AT&T firmware. The problem is that if you flash a build number AT&T didn't actually use on their devices you still won't get OTA updates from AT&T because their servers won't recognize the software version you are running.
---------- Post added at 02:03 AM ---------- Previous post was at 01:58 AM ----------
Lavman72 said:
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Click to expand...
Click to collapse
Have you tried the standard Samsung SmartSwitch program? Maybe it can update AT&T firmware now but it didn't in the past.
---------- Post added at 02:13 AM ---------- Previous post was at 02:03 AM ----------
If your phone is not carrier locked you could flash the U1 firmware and then you would get OTA updates from Samsung instead of AT&T. But you might not have access to some AT&T services like visual voicemail without AT&T firmware. AT&T also hates unlocked phones so it's possible Volte and Wi-Fi Calling will stop working. Some AT&T customers with unlocked phones were able to get the services activated by calling AT&T but success with AT&T Customer Service is hit or miss at best as you already discovered.
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/g...M-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
No G975U1 and G975U firmware are interchangeable. If your phone was still carrier locked you might get a message asking for the unlock code but you aren't using an AT&T SIM so your phone obviously isn't network locked. I went from AT&T G975U firmware to U1 firmware with no problems.
Im glad I'm not the only one experiencing this. My wife and I did a bogo deal for the Galaxy s10+ back in March. My phone has recieved updates regularly, while my wife's phone is still on the March patch and security. She hasn't even recieved the fingerprint update fix. Tried calling AT&T about it and they were totally unhelpful. Told me I had to contact Samsung about that and that they couldn't help with the issue. Im debating on calling them back and trying to speak with someone more knowledgeable, but it might just be easier for me to update her phone manually. I haven't had to do something like that in ages, so I wanted to ask for some guidance on here.
Would i need to do each consecutive update she's missed manually? Or would just updating to the newest firmware outright do the trick?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
Hey do you have the G975USQS2ASI6 ODIN files? I have been looking all over for it to flash it to my phone.
I just want to note, I am also in the same boat and it's INCREDIBLY frustrating. Both phones purchased in March with the BOGO deal, both phones stuck on the July 1st security patch. Supposedly what I've found after reading quite a bit is you can bring the phone to a local samsung repair center and they can flash the newest firmware, once you're up to date SUPPOSEDLY that resolves the OTA stuff. I don't believe it though.
Hi. So, fist post, tried to search a similar, but didn't find any.
I bough t a 2nd hand S8 SM-G950U. I am in the Netherlands, it was cheap. This had a Verizon firmware but was already unlocked. I could live by hiding the Verizon apps, but I couldn't update and the security updat was from 2019.
I went through a tutorial and found a Sprint firmware that is from 2020, but if I try to update the software, it says the device is up-to-date. I have another, G950F S8 that still receives updates. I just guess it is looking for updates on the EU servers that don't have updates for the US firmware.
I read that I cannot flash it with the G950F firmware, because they have different architecture, so what are my options? Can I try the U1 firmwares?
Thx, M.