My Phone is Not Detecting on Pc
Changed Cable and Everything
Main - Problem is I flashed Stock Rom Using Twrp After that Inam unable to Get Debugging Tried Every Method It's been 2 Months
STOCK OTA/STOCK ROM ZIP USING STOCK RECOVERY
HELP HELP HELP HELP HELP
Related
Hi
I have tried to find a solution for my situation in the last 2 days and I didn't find one.
I have a N910F with 5.0.1 lollipop stock rom. it is rooted and with TWRP recovery. i have used Odin.
The problem is that my phone started to act weird 2 days ago while charging. It was restarting itself while charging and i decided to stop charging. After few hours when i have tried i couldn't charge anymore. if i am using a USB cable to attach to my pc it saying USB device not recognized .
I want to flash a stock recovery or a 4.4.4 rom using only custom recovery( i have tried mobile odin but my device is not supported, also i have tried different genuine samsung usb cables). i have found a stock rom 4.4.4 flashable through custom recovery, but because i have 5.0.1 modem is not booting up.
How can i remove the custom recovery and flash a standard recovery without odin? i have root at the moment and custom recovery.
can some one send me a stock recovery for BOB4 5.0.1 lollipop flashable from custom recovery or flashfy/rom manager?
many thanks.
also i have tried to restore my nandroid backup and restore to factory defaults. the device status is still CUSTOM. the rom part it should be official, it is just the recovery non standard.
any help? suggestions? are the contacts near the battery usb compatible? can i use those contacts as usb? i want to send back phone to warranty and i don't want complications.
I have managed to update my recovery to stock one with flashify, also i have updated to boot.img with flashify. Problem is that the system status is still custom, and binary still custom. Any solution to that? ( one solution is to wait for wanam to be updated for lollipop and reset).
Hi all, im really hoping someone can help, and that what ive done is reversible.
After rooting I tried installing the alliance rom (lollipop) on my n610f, i got a boot loop so restored the backup rom using CWM without any problems, i read on the alliance rom page that id need a different bootloader and modem, i got what i thought were the correct one and put them on using odin, did a wipe and tried again, same bootloop. Except this time when i restore the backup rom i still have the same boot loop.
If anyone has a fix for this id be eternally grateful.
Fixed it by flashing N910FXXU1B OB4 [Lollipop 5.0.1] bootloader and modem
What did you flash? Modem or bootloader..? I think the best solution is, flash stock firmware via odin, then try again.
I went to install a custom OS for the very first time. I rooted my device with KingRoot and tried installing custom recovery via Flashify and i used a image file to flash the device and now when i boot the device it comes up with Samsung logo and then a blurred color screen and then blank screen. What should i do know... PLEASE SOMEONE HELP ME.
Two chances
1. You might have chosen boot image instead of recovery image option in flashify. boot image is kernel. device won't boot without kernel.
2. You have flashed wrong recovery image. you have to flash a working recovery image. make sure you downloaded right file.
Solutions
*If you have flashed Boot Image, then you have to download stock rom and flash it via Odin using a computer
*If you are flashed wrong recovery image then you can fix it by flashing right recovery.tar using odin
in both case you need a computer.
I suggest that you should go for an experts help.
You can find stock rom link and recovery.tar files at grand 2 general forum.
JitDevHacker said:
Two chances
1. You might have chosen boot image instead of recovery image option in flashify. boot image is kernel. device won't boot without kernel.
2. You have flashed wrong recovery image. you have to flash a working recovery image. make sure you downloaded right file.
Solutions
*If you have flashed Boot Image, then you have to download stock rom and flash it via Odin using a computer
*If you are flashed wrong recovery image then you can fix it by flashing right recovery.tar using odin
in both case you need a computer.
I suggest that you should go for an experts help.
You can find stock rom link and recovery.tar files at grand 2 general forum.
Click to expand...
Click to collapse
Thank you for your response. I installed the stock ROM using ODIN. And now, my phone is doing well. Fortunately, I upgraded from Jelly Bean to Kitkat. xD
I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Groverkss said:
I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Click to expand...
Click to collapse
Remove battery
Hold volume up
Insert battery
Connect usb cable
Enter fastboot command
Unlock bootloader
Flash twrp
Format data and cache
Flash custom ROM
Your method will not work
method will not work. I fixed it after a lot of trying.
Solution: Flash an old version of TWRP(like 2.8). Kitkat doesn't support the newer versions of TWRP. This is why flashing new TWRP doesn't work. Now install the stock ROM of KitKat cm11 and install Stock recovery. UPDATE cm 11 to cm12 using official updates using stock recovery. Now flash new TWRP and it will work. I don't use this site a lot but if you ever see someone askung this then this method will work.
So i was going to install a custom ROM on my g530h via twrp, and im new to this
I downloaded the file that the app asked me to, and acidentally flashes It as a boot, not as a recovery, now the phone just stays in the download mode, and I cant install the stock ROM with Odin, It gives me a different setor every time
Please help
What file did you actually install like what model was it exactly for ?
Post some screenshots of odin.
try watchin this.. i also have the same problem this week but i find the ways to fix it just flash the stock firmware of g530h xcu using odin so i use the xcu phil firmware which is 4.4.2 and it works.. just flash the stock firmware.. hope it helps...
Do you have any other method because when I rooted the divice I deleted some system files then lost USB connection with pc I tried may way to make it back like downloading the driver from Samsung nothing work and tried different stock rooms and custom ones all of them had the error 7 or md5 file not found by the the same thing happened with the os I made the boot to recovery by accident and lost the system .
Hi buddy
I am in a huge problem a friend gave me his sm-g530h duos to upgrade it's firmware to 5.0.2 i downloade one from sammobile & flashed it but it stuck on logo & not booting to recovery only download mode.then i tried to flash many other lollipop roms but every odin said fail.please help