hello.,
how are you
so the problem is zte axon 7 mini in qualcomm mode, (stuck on logo) so i decide to flash in edl mode, QULCOMM, via qfil
and now device is completely dead, no more qualcomm etc,
Mr Hassan said:
hello.,
how are you
so the problem is zte axon 7 mini in qualcomm mode, (stuck on logo) so i decide to flash in edl mode, QULCOMM, via qfil
and now device is completely dead, no more qualcomm etc,
Click to expand...
Click to collapse
Try with this cable https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 and Edl tool for Axon 7 mini from this website.
bius88 said:
Try with this cable https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 and Edl tool for Axon 7 mini from this website.
Click to expand...
Click to collapse
i think not workable for me :crying:
Do not give up!
bius88 said:
Do not give up!
Click to expand...
Click to collapse
but i already give up bro, :crying::crying::crying:
Related
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
ntouris3 said:
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
Click to expand...
Click to collapse
Thread moved to proper forum
If you can get the thing to go into fastboot (by pressing whatever button combination is appropriate for your specific device) and provided you have a backup of the partitions you damaged you can use fastboot to reflash the damaged partitions.
Google search for "[Guide] de-bricking a ZTE Blade - ZTE Blade / Libra ROMs & ROM" that will have various scenarios for debrikcing.
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
ntouris3 said:
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
Click to expand...
Click to collapse
Sometimes it is necessary to erase flash partitions before flashing them ... not sure if this is your issue but be warned that you could make things worse by doing so.
Can your phone start into ant of the other modes: recovery, field test or download mode ? if is can make sure you don't further damage the relevant partitions + the boot loader and whatever is used before the boot loader.
I've a snapdragon 600 based devel board and there are 2 stages of primary boot loader before LK ... not sure for your soc but make sure you don't dammage them if they are OK.
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
ntouris3 said:
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
Click to expand...
Click to collapse
I see people asking for the password on their forum ... regiter yourself there and ask for the password like the other users. If I knew it I'd give it to you
I'm not allowed to post links ... I'd point you to the url where people are asking for the password if I could.
Try searching with google : "Ultimate Qualcomm Snapdragon Unbrick Guide"
Thank you really much!
Sent from my Q8H-V1.0 using XDA Free mobile app
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
sinbaj said:
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
Click to expand...
Click to collapse
Mine too but i dont think you can flash via Sp tools this phone because its qualcomm not mediatek!
i used QPST and QXDM tool for unbreak the phone but i need flash files.:crying:
I find BIN file for full flash. zte_v955_full_riff.7z :angel:
which program i can use to flash with BIN file?
Im stuck there too bro
Qfil files for ZTE Blade g v880g ??
Hi all. I've an Axon 7 A2017 (Chinese 4/64). It's bricked but i think it is not hard one. Because notification led is working. When i try to turn phone on ZTE logo shows up and disappear. I added video. I can't use mi flash tool because i can't boot edl mode.
https://www.youtube.com/watch?v=VCUvFAFSYpo&
You should be able to get to EDL like this:
1. Power off
2. Hold both volume buttons
3. Plug device into computer
You should see device show up in EDL mode (USB 05c6:9008, Gobi Wireless Modem).
tdm said:
You should be able to get to EDL like this:
1. Power off
2. Hold both volume buttons
3. Plug device into computer
You should see device show up in EDL mode (USB 05c6:9008, Gobi Wireless Modem).
Click to expand...
Click to collapse
it is in DFU mode :crying:
WesTD said:
it is in DFU mode :crying:
Click to expand...
Click to collapse
Oh, that is unexpected. I thought only the G (Euro) models did DFU mode.
Sorry man, probably time to go ask for an RMA.
No twrp/recovery mode either? I know chinese 7.1.1 bootloader introduced dfu mode.
lafester said:
No twrp/recovery mode either? I know chinese 7.1.1 bootloader introduced dfu mode.
Click to expand...
Click to collapse
nothing. just like in video
The video doesn't show you trying.
It's a pity, but a ot of guys (including me) made that to their axon 7.
I didn't unlock the bootloader before any actions with root. And got the same bricked device.
It appears in DFU mode only. And as far as I know, there is no flashtool for Snapdragon 820 in DFU so far.
Any luck?
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
wichiepr said:
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
Click to expand...
Click to collapse
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Choose an username... said:
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Click to expand...
Click to collapse
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
wichiepr said:
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
Click to expand...
Click to collapse
deleted
atakan33 said:
deleted
Click to expand...
Click to collapse
What I delete? everything that I select is the same screen
wichiepr said:
What I delete? everything that I select is the same screen
Click to expand...
Click to collapse
Qualcomm HS_USB QLoader9008 or XX9008 ?
atakan33 said:
Qualcomm HS_USB QLoader9008 or XX9008 ?
Click to expand...
Click to collapse
QDLoader 9008 (COM3)
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
well, you should talk to @djkuz
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
maybe try MiFlash
atakan33 said:
maybe try MiFlash
Click to expand...
Click to collapse
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
wichiepr said:
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
Click to expand...
Click to collapse
The Led was flashing red and now it turn of, no action so far
wichiepr said:
The Led was flashing red and now it turn of, no action so far
Click to expand...
Click to collapse
If I am on you.I unlock bootloader and flash twrp
atakan33 said:
If I am on you.I unlock bootloader and flash twrp
Click to expand...
Click to collapse
I will as soon I can load it. look now that the battery is low. I going to try again using
tool.bat to see if I can unlock to flash twrp after the battery charge
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Can you rec the video of working my EDL TOOL on your PC?
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
wichiepr said:
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
Click to expand...
Click to collapse
I wait and It didn't load, it stay on the ZTE Screen. I did mage to turn it off , now I try to put it one EDL or any recovery but is not loading. I try with all button combination with out any lock, I start with the ZTE screen and after that It show a flash trying to load the MUI and the light turn off, I don't heard the sound of the usb on the computer and is not loading any driver.
Log attach Part 1 and Flash.log is part 2. I was able to fLash your B32 and is start with the ZTE screen and the screen goes black, Is not loading stay black
Log FIle
Attach the log files
DFU
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
wichiepr said:
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
Click to expand...
Click to collapse
Only test-pont may put the phone into EDL mode
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
If you cannot get to EDL mode, try an EDL cable (aka. deep flash cable). Like this:
https://www.amazon.com/gp/aw/d/B0792YKWPZ
I bought one. It works great. But it takes a couple weeks to ship from China.
If you are impatient, you can try this method, but be very careful:
http://en.miui.com/thread-310325-1-1.html
I have also tried this method and it works.
Note, you can unplug the phone to retrieve the wire. Once in EDL mode, the phone will stay in EDL mode until it is reset.
axtenar said:
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
Click to expand...
Click to collapse
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
donev_go said:
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
Click to expand...
Click to collapse
For mini is [Axon7 mini EDL Tool].
hi, everyone , i m tring to revive my hard bricked oneplus 8 pro but without any luck i m getting "firehosecheckrsp failed errno 258" error , i tried every possible solution a did find (Drivers, Cable, USB 2 , other pc) , i m convinsed tha i shoud start search for a motherboard replacements (even that i coudnt find on the internet)
so please if anyone could help me (Phone stuck on EDL mode - recognised by pc but buttons combination doesn't work )
If you're in edl mode, have you attempted to MSM back to stock?
That's about as low level as you can get, so from a recovery perspective if that doesn't work then nothing will.
Also have you tried holding all the buttons for a long time? Say 30 seconds?
Bare in mind that EDL mode will not remain on for very long, you have to have the MSM tool open and ready for the connection, then with the phone off. Connect it to pc and hold volume up and down, you'll hear the windows ding and it'll say connected on the MSM tool, then and only then click start, flashing should commence and it'll remain locked in EDL until complete.
Lastly you're in warranty so you shouldn't need to buy or replace anything.
dladz said:
If you're in edl mode, have you attempted to MSM back to stock?
That's about as low level as you can get, so from a recovery perspective if that doesn't work then nothing will.
Also have you tried holding all the buttons for a long time? Say 30 seconds?
Bare in mind that EDL mode will not remain on for very long, you have to have the MSM tool open and ready for the connection, then with the phone off. Connect it to pc and hold volume up and down, you'll hear the windows ding and it'll say connected on the MSM tool, then and only then click start, flashing should commence and it'll remain locked in EDL until complete.
Lastly you're in warranty so you shouldn't need to buy or replace anything.
Click to expand...
Click to collapse
Thanks for you're replay , but the phone is always on EDL mode even if i unplug the battery (open phone) when i plug again the phone goes automatically to EDL mode and MSM tool show the phone as connected , but when i try to pass the flash, i got the 258 error
ahmadOnePlus said:
Thanks for you're replay , but the phone is always on EDL mode even if i unplug the battery (open phone) when i plug again the phone goes automatically to EDL mode and MSM tool show the phone as connected , but when i try to pass the flash, i got the 258 error
Click to expand...
Click to collapse
Did you make sure you changed the target device?
Also, what model 8 pro? Are you using correct msm for that model? And it almost sounds like you aren't using correct drivers. Qualcomm USB drivers are needed
jamescable said:
Did you make sure you changed the target device?
Also, what model 8 pro? Are you using correct msm for that model? And it almost sounds like you aren't using correct drivers. Qualcomm USB drivers are needed
Click to expand...
Click to collapse
+1 to this
You need these so the phone is detected correctly in windows. Here is a link.
Qualcomm HS-USB QDLoader 9008 Drivers: Download and Installation Guide
Download Qualcomm HS-USB QDLoader 9008 drivers for communicating with your Android device in Emergency Download (EDL) mode. Learn how to install these drivers on any Windows 11/10/8.1/8/7 computer.
www.thecustomdroid.com
I have the same problem. I have a 7T but stuck with the same error firehose check rsp failed, errno:258
gcf81 said:
I have the same problem. I have a 7T but stuck with the same error firehose check rsp failed, errno:258
Click to expand...
Click to collapse
Hey, I think you reached out to me on YouTube. Do you know for sure which model of OnePlus 7T you have? There are two common versions in North America HD1907 (T-Mobile) and HD1905 (international unlocked)
Nick-Henkey said:
Hey, I think you reached out to me on YouTube. Do you know for sure which model of OnePlus 7T you have? There are two common versions in North America HD1907 (T-Mobile) and HD1905 (international unlocked)
Click to expand...
Click to collapse
Hey Nick, thanks for responding. It was bought unlocked North America version but then ATT customer support went into the phone while trying to fix something and I think they locked it right before it crashed.
gcf81 said:
Hey Nick, thanks for responding. It was bought unlocked North America version but then ATT customer support went into the phone while trying to fix something and I think they locked it right before it crashed.
Click to expand...
Click to collapse
Looking around, the North America version should be running international firmware (HD1905):
OnePlus 7T hardware variants
I was curious about the different hardware variants of the 7T and decided to ask support once EU launch went over and they kindly answered. HD1900: China HD1901: India HD1903: Europe HD1905: North America HD1907: T-Mobile USA
forum.xda-developers.com
I presume that you're using this MSM tool - https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.3994835/
Did you try all of the steps suggested by OP, yet?
Install drivers
Change to factory cable
Different USB port
Different Windows computer?
The only thread I could find where this problem was solved was on the OnePlus forum. The user completely removed and reinstalled the Qualcomm drivers (a different PC should handle that) - https://forums.oneplus.com/threads/solved-closed-trying-to-unbrick-op5t.956810/