Database Users

P9 Lite Dead

Hay guys,
i had Beanstalk installed on my P9 Lite, then I wanted to test Stock MM Beta, in the flashing process the phone gave me an error and now I think it is fully bricked.
I cant enter dload or erecovery & when I try to flash system.img (extracted from stock b161) it says 'sparse flash write failure', if i try to flash cust.img it says ' partition error '
I already tried to boot into an costum recovery (revolution,twrp medicolous & nougat) but it ends all up in 'Your phone is booting now...'
Could you guys please help me?

The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).

BadWolfYe said:
The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).
Click to expand...
Click to collapse
What happens if it wont boot after I payed the 15 Dollars?
And is it really 100% safe?

I got a brick (dont enter un bootloader) and these program unbrick totally...

Didnt work...
Writing MODEM_FW partition with file C:\Users\chris\Desktop\DC_Phoenix\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition with file C:\Users\chris\Desktop\DC_Phoenix\CACHE.img
CACHE partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\chris\Desktop\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...FAILED
Erasing CUST partition
Partition CUST erased
Writing CUST partition with file C:\Users\chris\Desktop\DC_Phoenix\CUST.img
CUST partition UPDATE ...FAILED
Software written
04.01.2017 23:43:47 Writing device finished - INCOMPLETE

Test another update.app from tour original model

Now everything was succesfull with B161, but I´m still in bootloop, i tried to update via dload but its stuck at 5% and boots again after a few minutes..

Try factory reset & wipe cach from recovery and it will boot normal

Mine would fail at 5% in dload. Is your phone fully charged? It fails if not.
I flashed b161 in DC Phoenix, then let it boot to erecovery, left it charging overnight. Next morning dload flash of b161 worked up to 99% then failed. Then I tried again. 100% and boot.
Sent from my ONEPLUS A3003 using Tapatalk

Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card

xChelsy said:
Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card
Click to expand...
Click to collapse
With the app Chamelephon you can set the IMEI again with root access, you can find the IMEI on the original phone box.

The problem is that im unable to root my p9 lite, because bootloader is locked and i need IMEI to unlock the bootloader ..

wiped the data and system partition before flashing ?

you dont need imei, you need the code, if you have the code i think you can unlock the bootloader

spadyrus said:
you dont need imei, you need the code, if you have the code i think you can unlock the bootloader
Click to expand...
Click to collapse
I was able to unlock bootloader and flashed cm13 ..
But if insert my SIM card a grey screen popt up saying 'Insert SIM Code NCK' or so..
I closed bootloader & flashed Stock Rom via dload:
Now I will send it to Huawei

I think you change imei via pc program
I remembered this... And the imei is in the box of the phone (i'm not english, I don't know if BOX OF THE PHONE is fully correct ahah)

[Solved] Bricked P9 Lite

Hi, i have a big problem: my phone isn't starting up anymore. Before bricking my device, i was in b160(VNS L-21), then i decided to upgrade to Nougat. So i unlocked bootloader, flashed twrp etc.. Finally i got N working, after that i flashed Revolution twrp and ROM, everything fine. Then i decided to format data, just to get a "clean" ROM, but after this, my phone fell in bootloop and, i don't know why, i couldn't even get into twrp and if i try to boot into it, i just get stuck in the yellow text "Your phone is booting up..." forever. So i downloaded b160, extracted update.app and flashed system, boot, cust and recovery to try to get as stock phone was, but after that i couldn't boot into system: i just saw the yellow choices menu stuck with the same text "Your phone is booting up...", can't even see Huawei's logo. I tried to flash twrp for 6.0, but i couldn't boot into it cause it was replaced everytime by eRecovery. So i tried to install b160 from dload method and it worked but bootloader locked again and i don't have the password anymore, and after Huawei's logo there's just a black screen forever. I heard about some kind of "oeminfo.img" to flash before downgrading from N but i didn't do that cause i couldn't access twrp after formatting data. I tried to install via ota b100, b120, b130 without success, they all say incompatible firmware when i install them. I can just install b160 or b161 but they don't boot up. Please help me if u can, i'll really appreciate it

unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron

RonPo said:
unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron
Click to expand...
Click to collapse
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me

xDavi01 said:
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me
Click to expand...
Click to collapse
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them

You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.

Schlengge said:
You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.
Click to expand...
Click to collapse
Okay, i found it, but what about serial number and product id?

dondrog said:
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them
Click to expand...
Click to collapse
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best

xDavi01 said:
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best
Click to expand...
Click to collapse
for some reason that does not work for me VNS-31 :crying:

Serial Number

So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:

p9 lite bricked
Ngii_ said:
So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:
Click to expand...
Click to collapse
i have the same problem, i dont unlock my bootloader, i buy my divice in usa and i update in argentina, now the device dosen't start.
if i tried to turn on it do the huawei logo twice and then give it to me 3 options
-Download latest version and recovery
-reboot
-shuttdown
i try to download the upgrade using the first option and flash an update.app from the sd card, but it says "failed"
in fastboot and rescue mode "frp is lock" and "phone lock"
any suggestion or proces is welcome!
sorry, im from argentina and English isn't my first language

I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app

mutahharbashir said:
I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ohhhhhhh good explanation friend.
Can explayn to all how flash TWRP with Bootloader UNLOCKED....but w/o OEM lost, so with Serial 123456xxxxxx????
I've flashed by Professional tool, BOARD + FULL Update.App + Custom fw (vendor/country), flash perfect but phone always in Bootloop becouse "Bootloader Unlocked" and Fake Serial.
Explain please, is easy when phone isn't Bricked and can enter in "Manufacture Mode"....but with phone only in Fastboot or Recovery how you do?

Hard brick

next ... After unlocking the bootloader of my g4 plus bike, I made the installation of the rom and an update arrived via ota ... I placed to make the installation and after made the cell phone hung up and did not call any more ... then I did the blankflash and the mobile came back in fastboot mode with the boot blocked again, now I can not install any rom and nor unblock the boot by not having the option oem unlock checked ... my question is the following have some way to enable the option unlock boot without starting the system, by adb or something, or do the installation of some rom with the boot blocked? Thank you very much in advance

Which ROM did you flash onto your device?
As far as I understand, you cannot enable the OEM unlocking option without booting to system, and as your bootloader is set to OEM_locked by the blankflash, you need to flash the stock ROM firmware to get your system working.
I'd suggest looking into flashing the latest stock ROM firmware, follow this unbricking guide here: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
If that doesn't work, then you may have to wait for a newer firmware or submit your device for an expensive service repair.
For future reference, if you did flash an older stock ROM firmware, please delete that and only flash stock ROM firmware as new or newer than your bootloader. If you do want to flash older stock ROM firmware, do not use OTA updates please. Old OTA updates corrupt your bootloader and thus lead to a hard brick.

LeEco Le 2 x526, no signal, SIM is detected

Hello,
I am flashing the lineageos with the official instruction. The rom is installed (partition was decrypted), but I have no signal.
After a long research on the net and various instructions and tips. My two IMEIs disappeared (sim cards were then no longer recognized).
Finally I have a stock rom with Qfil installed (13s). I was then able to restore the IMEIs through the AT Port Menu via Qualcomm IMEI RepairTool. The SIM cards are recognized again but do not dial into the network. I have also a baseband version package.
In the *#*#4363#*#* menu there were all frequency bands to choose from, but I can not select one. The error message always appears ... [unsuccessful]
Maybe someone else has a tip?

If u have backup modem,you can restore via fastboot
Or u can backup modem,modemst1,modemst2 image,save in your computer,,then delete modem using fastboot command
Fastboot erase modem.img st1 and st2
Then restore modem
Fastboot flash modem modem.img
St1 and st2
Dont forget to check imei

I can solve with this
https://forum.xda-developers.com/le-2/help/le-2-x526-rose-gold-reports-network-t3855226