Related
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..
ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"
o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".
ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!
I am still in the same situation... Anyone who knows what to do?
ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry
I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.
Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?
try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok
Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device
Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .???
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Ta-1000 rom mdl: D1C-331A-0-00CN-A01.7.1.nb0
MENA ROM MODEL: PLE-3320-0-00WW-A02.nb0
When it shows "no command" press power button and volume up, then immediately release volume up button. There is a chance you'll get into recovery and from there you can put your phone into "download" mode, so OST LA will detect it.
P.S. A bit dumb idea to do risky experiments with a daily driver.
ziaur786 said:
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Click to expand...
Click to collapse
Dear brother, i would like to suggest you one thing, I not 100% sure but it might help you, follow these steps
Please read the instructions very carefully
also make sure you have all driver and framework properly installed
1. Download the TA-1000 Firmware from here
2. Then open your OST tool.
3. When you select the firmware on OST tool, after that it will prompt you to connect your device
4. Just do not do anything, keep patience, turn off your device properly and then connect to the computer. It will directly boot into download mode.
done, rest of the steps are same as you flashed your device before.
Enjoy
hit the thanks button if you find this useful
happy flashing
Hi guys
Few days ago i unlocked the bootloader of my device then it made a factory reset and every thing gone , default theme deleted , the apps that come with the device also deleted , and the most annoying thing that locking screen widget gone to ?
I searched for a rom in the forum and found this
https://forum.xda-developers.com/trash/stock-rom-pra-la1c185b101-emui-5-0-t3746017
When i try to flash it using SD card and dload , nothing happen , just locks the bootloader and erases every thing , nothing gets back , even build number in settings doesn't change
Then i tried firmware finder , downloaded pra-la1c185b121 , and when trying flashing it , erecovery fails
Any help please to flash a stock fresh rom ?
Model gr3 3017 - PRA-LA1C185B120
Any help ?
Try with older firmware with build number 101
salah.kayssi said:
Hi guys
Few days ago i unlocked the bootloader of my device then it made a factory reset and every thing gone , default theme deleted , the apps that come with the device also deleted , and the most annoying thing that locking screen widget gone to
I searched for a rom in the forum and found this
https://forum.xda-developers.com/trash/stock-rom-pra-la1c185b101-emui-5-0-t3746017
When i try to flash it using SD card and dload , nothing happen , just locks the bootloader and erases every thing , nothing gets back , even build number in settings doesn't change
Then i tried firmware finder , downloaded pra-la1c185b121 , and when trying flashing it , erecovery fails
Any help please to flash a stock fresh rom ?
Model gr3 3017 - PRA-LA1C185B120
Click to expand...
Click to collapse
eRecovery is the only way that worked for me, use it to download and flash stock firmware
dz3ro said:
eRecovery is the only way that worked for me, use it to download and flash stock firmware
Click to expand...
Click to collapse
I didn't know that eRecovery can download a stock firmware!!
How can i download it using eRecovery?
Susan Dahal said:
Try with older firmware with build number 101
Click to expand...
Click to collapse
I tried as i mentioned in the link , it doesn't fail , but it also doesn't retrieve neither the themes app nor the screen off widget
And the built number still b120
salah.kayssi said:
I didn't know that eRecovery can download a stock firmware!!
How can i download it using eRecovery?
Click to expand...
Click to collapse
Here is a quick tutorial :
Make sure you backup your important files because it will factory reset
1- Turn off your phone
2- Plug your phone to PC using USB cable
3- Long press VOL UP + POWER untill you enter eRecovery
(You can unplug the USB cable after you enter eRecovery)
4- Choose the option : Download latest version and recovery
It will start the wi-fi and connect, then it will find your latest firmware automatically and start downloading and installing.
i hope this helps...
dz3ro said:
Here is a quick tutorial :
Make sure you backup your important files because it will factory reset
1- Turn off your phone
2- Plug your phone to PC using USB cable
3- Long press VOL UP + POWER untill you enter eRecovery
(You can unplug the USB cable after you enter eRecovery)
4- Choose the option : Download latest version and recovery
It will start the wi-fi and connect, then it will find your latest firmware automatically and start downloading and installing.
i hope this helps...
Click to expand...
Click to collapse
Getting package info failed
nikkas02 said:
Getting package info failed
Click to expand...
Click to collapse
Maybe it's because you have very old firmware because it didn't used to work for me before when i had old firmware, i will upload my eRecovery from b194 for you and you can flash it and try it maybe it will work.
Edit :
here you go : http://www.mediafire.com/file/2jc44ur7u4akaqz/eRecovery.img
Put it in fastboot folder and flash it with this command :
fastboot flash recovery2 eRecovery.img