Hi every one
I am a new user here and i dont know about unbrick or reviving a dead phone:crying:
i have a trouble with my zenfone v 520kl verizon .I unlocked bootloader then by mistake deleted aboot and recovery
now my phone is dead No fastboot no recovery only get recognize as qualcoom hs-usb diag 900e
Is there any way to fix this issue ?
kado0osh said:
Hi every one
I am a new user here and i dont know about unbrick or reviving a dead phone:crying:
i have a trouble with my zenfone v 520kl verizon .I unlocked bootloader then by mistake deleted aboot and recovery
now my phone is dead No fastboot no recovery only get recognize as qualcoom hs-usb diag 900e
Is there any way to fix this issue ?
Click to expand...
Click to collapse
Unfortunately I don't think so if you can't get into fastboot. Can you go through what steps you did to end up where you are?
jal3223 said:
Unfortunately I don't think so if you can't get into fastboot. Can you go through what steps you did to end up where you are?
Click to expand...
Click to collapse
First unlocked bootloader by install ENG firmware ,then fastboot command :
fastboot erase recovery
fastboot erase aboot
after that turned the phone off and tried to restarted only black screen no vibration no recovery no fastboot !
only recognize as Qualcomm hs-Diagnostics 900E
how can i access fastboot or EDL By button combination ?
Finally i managed to restore the phone again now its working !!
kado0osh said:
Finally i managed to restore the phone again now its working !!
Click to expand...
Click to collapse
Awesome please share how you did it.
jal3223 said:
Awesome please share how you did it.
Click to expand...
Click to collapse
Just flashed it throw EDL Mode with repair firmware now its working
In my country there is no store that would sold the EDL cable but i made one by my own way
i:fingers-crossed:
kado0osh said:
Just flashed it throw EDL Mode with repair firmware now its working
In my country there is no store that would sold the EDL cable but i made one by my own way
i:fingers-crossed:
Click to expand...
Click to collapse
Awesome. That's pretty crafty of you. Lol. If I run into the same troubles I'll know who to talk to. Haha.
So, are you going to try to make TWRP for it now??? Lol
jal3223 said:
Awesome. That's pretty crafty of you. Lol. If I run into the same troubles I'll know who to talk to. Haha.
So, are you going to try to make TWRP for it now??? Lol
Click to expand...
Click to collapse
unfortunately I sold it yesterday .there is no rom or TWRP for this phone :crying:
kado0osh said:
Just flashed it throw EDL Mode with repair firmware now its working
In my country there is no store that would sold the EDL cable but i made one by my own way
i:fingers-crossed:
Click to expand...
Click to collapse
hi,friend,could you tell me which tool you use to flash at EDL mode?and which firmware you use?
my phone lost imei and sn,but when i want flash the raw rom at edl mode,the asus flash tool can not find the device....
Thanks.
Related
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
vegetaleb said:
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
Click to expand...
Click to collapse
thanx alot for ur reply.. but this is tutorial for flashing M9+.. i really checked before...
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
What exactly steps did you do to brick?
iElvis said:
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
Click to expand...
Click to collapse
simonbigwave said:
What exactly steps did you do to brick?
Click to expand...
Click to collapse
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
t-mobile_mda said:
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
Click to expand...
Click to collapse
device is not restarting the driver second time as Preloader Device...
You will probably have better luck posting in the M9+ forum. I have never heard of this flash tool, but the dedicated xda thread for it seems to be full of bricks.
From the sound of it, you either flashed the wrong file or flashed the right file to the wrong place.
Just curious if the pc detects the device will an RUU detect it?
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
Usually something like "USB Preloader Device" means a low-level brick because the PC can't tell what it is. For a RUU to work, it has to be detectable by ADB, not just Device Manager.
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
bigp951 said:
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
Click to expand...
Click to collapse
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
That flash tool seems scary to me... Sorry for not adding any advice!
TwinAdk said:
That flash tool seems scary to me...
Click to expand...
Click to collapse
I had the same thought, especially given the number of bricks reported in the thread.
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
A hardware un bricking tool (sure there used to be a tool for htc devices xtc was it? Could be wrong?) or RMA seems to be your only options now.
Obviously try the holding all buttons and waiting for the vibrate method then try to get to bootloader mode. If that fails I'd be aiming to get it replaced, good news is if it is totally bricked, chances are HTC will just think the bootloader went on you.
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
hi..
as i say above pc detects the device..preloader or mtk usbvcom... and only SDcard flashing possible.. not exist RUU..
0PK7IMG.zip
iElvis said:
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
Click to expand...
Click to collapse
really i tried all methods while it has rebooting the bootlaoder screen..i flashed the device with this tool finally..and totally dead..
TwinAdk said:
That flash tool seems scary to me... Sorry for not adding any advice!
Click to expand...
Click to collapse
iElvis said:
I had the same thought, especially given the number of bricks reported in the thread.
Click to expand...
Click to collapse
this flash tool is for MTK 6795 devices which HTC M9+ is one of them.. only these flashloaders accept it's scatter file.. (MT6795_Android_scatter.txt)
SP_Flash_Tool_exe_Windows_v5.1504.00.000
SP_Flash_Tool_exe_Windows_v5.1512.00.000
SP_Flash_Tool_exe_Windows_v5.1516.00.000
SP_Flash_Tool_exe_Windows_v5.1520.00.000
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
özkan72 said:
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
Click to expand...
Click to collapse
hi..
u mean u r on the same condition.? only vibrates and detects com port as Preloader..?
my nexus 6p is soft bricked
i followed this thread https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
im trying to enter edl mode via fastboot but without success,also tried deepflash cable but also without success
can you help me enter edl mode ,i read there's a testpoint for it but couldn't find it
i appreciate your help
You may need to download a new rom and install that one I had same issue at one point that's how I got my phone to work again stock rom would not boot no matter how what I did
Sent from my Nexus 6P using Tapatalk
yes and to install new rom i need to put phone in edl mode
jawad8305 said:
my nexus 6p is soft bricked
i followed this thread https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
im trying to enter edl mode via fastboot but without success,also tried deepflash cable but also without success
can you help me enter edl mode ,i read there's a testpoint for it but couldn't find it
i appreciate your help
Click to expand...
Click to collapse
Do you mean hard brick? Can you enter recovery and can you flash the stock boot images through fastboot?
no i can't use fatsboot cause device is locked !
i can't enter recovery only fastboot
ok problem solved ,thank you friends for help
i have solution but it's paid
jawad8305 said:
ok problem solved ,thank you friends for help
i have solution but it's paid
Click to expand...
Click to collapse
Ready to pay. WHat's the solution?
Solution please
muntaha_v3 said:
Ready to pay. WHat's the solution?
Click to expand...
Click to collapse
Does any of you has the right solution guys ?
What is the reason why you would like to enter edl mode?
But yes, there are normally two test points you have to shorten to enter edl mode if the command 'adb reboot edl' does not work for you.
Maybe this two sites helps with that:
https://alephsecurity.com/2018/01/22/qualcomm-edl-1/
https://alephsecurity.com/vulns/aleph-2017027
jawad8305 said:
ok problem solved ,thank you friends for help
i have solution but it's paid
Click to expand...
Click to collapse
How did you do that? Any solution can be provided?
Please reply. Thanks,
EDL (Emergency Download) Mode has been removed/ disable from MIUI 8.1 onwards and Redmi 4A later Xiaomi devices. So you can flash MIUI Fastboot ROMs on your device by using Fastboot mode only, if your bootloader is unlocked. And, we can't use Qualcomm Jig Cable(s) also now.
So, we have only one way to know Qualcomm HS-USB QDLoader 9008 port from PC. It's Test Point Method. This method will work with every MIUI ROMs (Upgrade/ Downgrade) , Locked Bootloader/ Unlocked Bootloader and also work to recover from a Dead boot device (Bricked).
While touching these two points with a metal tweezers plugin the usb cable to the phone and PC will make the phone enter edl mode. You can then release the tweezers.
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...
TioCareca said:
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...
Click to expand...
Click to collapse
In any case, the bootloader muz be unlocked to initiate EDL using ADB fastboot..
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command.
Click to expand...
Click to collapse
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed
adrenochrome25 said:
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed
Click to expand...
Click to collapse
What makes you think I'm so lame as well. I have used this command and flashed my mi max 2 with fastboot rom. Tho I don't remember if bootloader was locked or unlocked. Probably it was unlocked. But still no issues as anyone can unlock thier bootloader officially.
i wasnt intended at you. it seems they forgot some ways when they first deployed the edl blocking access but with the most recent "roms" they have blocked every access way to edl when bootloader is locked : adb, fastboot & cable
the only way left is from internal pins, but we can expect they will hide them even better on new phones.
Today it's much worth to wait 72h (+30days if you just already unlocked another one today) than opening the models that have "non removable" batteries and risking to leave traces/damages
it's really a shame that xiaomi lock their phone this way, it's a very bad message at the users (fastboot is so much restricted that you cant even switch between stable&dev anymore with locked bootloader) but we still have the chance that they allow unlocking and that this unlocking is a real one allowing full control
Fastboot rom isn't needed untill we brick our device and we can't brick the device untill we have unlocked bootloader. So basically edl mode will work when it's really needed.
It doesn't work for my MM2. Got it since 4/12/17. Didn't know i need to login to mi acc to register my device, set usb debugging, developer's mode, unlock status...I had the phone for less than 2 hrs after updating to MIUI 9 from ver 8 (using the updater app) before it suddenly froze up, crashed and went into bootloop. I tried contacting xiaomi svc ctr but those clowns refused to help saying my device is china export.
I cldn't even get them to help me register my device on my mi acc using the imei & s/n info. So if anyone could offer some suggestions as to how I could ressurrect my phone, I wld be most grateful. Failing which the only avenue is to bring it to a svc ctr in China to get them fix it.
Rgds
My test points don't seem to work
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?
Nike Lee said:
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?
Click to expand...
Click to collapse
I managed to short the test points and got the Qualcomm HSB device on the device mgr, flashed the mi max2 with the latest global stable (V9.2.1) rom. But the phone is still stuck at the Android logo with 3 dots...
I wld have thought EDL flashing wld have wiped out everything on the phone and start afresh?
I am now thinking of formatting the entire phone and reflashing it again. How wld I do that?
Thanks for any inputs.
Hi, Does EDL with test point flashing refresh the boot partitions?
I have shorted the test points and successfully reflash the phone with the latest stable global ROMs (even back to MIUI 8.5.6) but just couldn't get the phone past the MI/Android logo after restarting it
If the boot partition files have been messed up and EDL flashing is not refreshing these files, no matter how many times I try to EDL flash the device, it's not going to help. Pls correct me if I am wrong.
Any other options I can try?
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
bro thank u so muchhhhhhhhhhhhhhhhhhhhhhhh. it worked im so happy now...........was trying since hours....but u helped me mannn
Hello members,
(This is my last try to save my device)
What happened?
I wanted to flash stock rom and by error I double clicked on Flash_factory in the the fastboot folder.
The device booted into fastboot and never came back. It went to edl mode (coz led was blinking) I flashed the fastboot rom but I guess in the 2nd half the Mi flash tool showed the error as TIME OUT.
In device manager, phone is detected as Qualcomm 900E so tried to install drivers (9008) after disabling signature enforcing but it showed that windows can't verify the driver.
Went to Mi service center they said it's a water damage (3 month ago it happened but the device was working fine until now) so the service center didn't do any real efforts to fix it.
What are my options! Any help will be appreciated.
P.s no edl or Fastboot.
iamshivendu said:
Hello members,
(This is my last try to save my device)
What happened?
I wanted to flash stock rom and by error I double clicked on Flash_factory in the the fastboot folder.
The device booted into fastboot and never came back. It went to edl mode (coz led was blinking) I flashed the fastboot rom but I guess in the 2nd half the Mi flash tool showed the error as TIME OUT.
In device manager, phone is detected as Qualcomm 900E so tried to install drivers (9008) after disabling signature enforcing but it showed that windows can't verify the driver.
Went to Mi service center they said it's a water damage (3 month ago it happened but the device was working fine until now) so the service center didn't do any real efforts to fix it.
What are my options! Any help will be appreciated.
P.s no edl/Fastboot now.
Click to expand...
Click to collapse
Fastboot flashing is the safest method to flash your device. Download stock rom files from official website and flash each file separately via fastboot.
Sent from my [device_name] using XDA-Developers Legacy app
nikhel said:
Fastboot flashing is the safest method to flash your device. Download stock rom files from official website and flash each file separately via fastboot.
Click to expand...
Click to collapse
I mean to say i have no access to flastboot nor edl mode.
iamshivendu said:
I mean to say i have no access to flastboot nor edl mode.
Click to expand...
Click to collapse
Search about Deep Flashing.
Sent from my [device_name] using XDA-Developers Legacy app
nikhel said:
Search about Deep Flashing.
Click to expand...
Click to collapse
Okay
Power cycle the phone by pressing power button for 10-15 sec after that phone will become 9008
But since your phone is completely wiped out by factory command your imei is destroyed
emprazol said:
Power cycle the phone by pressing power button for 10-15 sec after that phone will becom 9008
But since your phone is completly wiped out but factory command your imei is destroyd
Click to expand...
Click to collapse
Can i restore my imei?
iamshivendu said:
Can i restore my imei?
Click to expand...
Click to collapse
yes you can but you must active diag port first then find a qcn and edit it with your imei and restore with qpst
its complicated i think its better to visit a technician
I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
For real? Accidentally flashed ROM from different phone?
Probably just service with box to get it back to normal state
You mean I should go to service center?
Any fix here?!
ayazuddinkhan said:
You mean I should go to service center?
Any fix here?!
Click to expand...
Click to collapse
You need to open your phone and enable EDL mode, then you will need to pay a service (20/30 euros) to unbrick your phone via your PC (using TeamViewer remote control software).
Or try to use your warranty...
You messed up, what do you expect? Warranty, edl or local service with service box - every single one is paid
Try to get help on any 9t telegram groups
ayazuddinkhan said:
I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
Click to expand...
Click to collapse
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Yes Done thankyou
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
did u revive ur phone again .. or what ?
xD9 said:
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
Click to expand...
Click to collapse
do u fixed it .. if yes how