Database Users

[HELP] Bricked my phone

Helo!
I recently purchased a Redmi 3s which came with a fake rom so I decided to flash a new rom. I tried it via the updater app but it didnot work. Then after reading a few trick I tried the fastboot method but the process got stuck and now my phone cant boot. I was able to boot in fastboot and I see it in list of the devices but the mi flash tool keeps crashing.
Note: my bootloader is locked and I dont have any custom recover it was a stock phone.

Hi,
what means crashing? You get an error message?
You habe to try another MiFlash Version. The latest also didnt work for me.
You have to flash the latest developer rom to unlock the bootloader.

You can't flash ROMs through fastboot if your bootloader isn't unlocked... Never mind now you try to enter fastboot and flash a TWRP into it.

Yappuccino said:
You can't flash ROMs through fastboot if your bootloader isn't unlocked... Never mind now you try to enter fastboot and flash a TWRP into it.
Click to expand...
Click to collapse
I cant flash a reccovery because it says it is locked.

Apparently there's a method that involves using EDL mode and a deep flash cable, not sure if it'll work in your case or not

psychopac said:
Apparently there's a method that involves using EDL mode and a deep flash cable, not sure if it'll work in your case or not
Click to expand...
Click to collapse
Yes I heard about that but it seems a bit dangerous.

r.omega888 said:
Yes I heard about that but it seems a bit dangerous.
Click to expand...
Click to collapse
Considering that the said method restores your phone and you have a spare USB cable lying around, I'd say it's worth a try

r.omega888 said:
Helo!
I recently purchased a Redmi 3s which came with a fake rom so I decided to flash a new rom. I tried it via the updater app but it didnot work. Then after reading a few trick I tried the fastboot method but the process got stuck and now my phone cant boot. I was able to boot in fastboot and I see it in list of the devices but the mi flash tool keeps crashing.
Note: my bootloader is locked and I dont have any custom recover it was a stock phone.
Click to expand...
Click to collapse
same issue here, I was talking about my problem here
Trying to find a way to fix it, thanks!

If you have locked bootloaders, the only way to recover your phone is flashing ROM using MiFlash. To do it, you need to enter EDL. Now the only way for locked bootloader users is deep flash cable. You can google for guide how to make it. The trick is to connect green cable to the black one.
If you want to unlock bootloader and don't stuck at 50%, you need to flash a DEVELOPER ROM (International/Chinese, doesn't matter).

Forget all the complicated deep flash cable making guides. There's an ultra easy way to make one. Just strip off the outer jacket of a usb cable, about an inch or so, exposing the 4 wires inside. Then just push a pin or needle through the green and black wires like this guy has done. Easy peasy!
I made mine this way and was able to enter edl mode and flash a fastboot rom.

Recover from Hard Brick (900e) - Revive our Z2 WITHOUT DATA LOSS

Hey!
Z2 owners that like to mess around with their phones are prone to get f#ked. I was there and I faced the problem some of you probably did - a hard brick. There are a ton of tutorials on how to fix it, but I believe I found a new way that doesn't envolve resetting it. I have only tried with twice on my phone, so I'm really looking forward to know if it's universal!
Scenario - Your phone has a black screen. The notification LED is on. If you hold the power button it flashes the ZUK logo and it vibrates. If you identify with this scenario, go forward!
1 - To turn off your device (if you haven't already), press the power + volume up. The phone will vibrate, flash the ZUK logo, turn off the LED and turn it on again. Continue holding both buttons. When the LED turns off again, REMOVE your fingers from both buttons right away. If done correctly, it won't come back again and the LED will be off
2 - Hold both Volume Up and Volume Down at the same time. Connect to the computer. You should encounter your Fastboot mode (with your baseband and other info blank).
3 - Go to your email and redownload the bootloader unlocker. Yes, remember that file? Use it. You can use one of those unlock bootloader tutorials online, but if you know what you're doing, here's the command:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
4 - Right after that, run this other command
fastboot -i 0x2b4c oem unlock-go
That's it. You should be able to go to the recovery (flash it again just to be sure). Try it out and tell me how it goes.

not working...phone is gettin turned off...but holding up and down..then connecting is doin nothing..it just keeps on going on and off again

This method worked for me,thank a lot of,great trick
Sent from my Redmi Note 3 using Tapatalk

you my friend, are a god among men, i owe you a beer.

fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz

vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
hey thnks bro...i successfully enabled 9008 port and flashed firmware
thanku so much

Where were you man I have to cut my wire and format my phone for flashing new firmware

My phone don't show the led light
No button combination works
I was restoring twrp backup and the next boot...And i was bricked
It shows diagnostic mode 900E
Please help

Finally done
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Had the same problem and first i went to download mode by following the the below link
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
then i downloaded the stock firmware and followed this guide
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
Both of them helped.:good::fingers-crossed: hope they work for you

Please tell me the process for recover from hard brick, because zukfans.eu is no longer available.

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
What is the process??? Please tell me here because zukfans.eu is not accessable

Rit2005 said:
What is the process??? Please tell me here because zukfans.eu is not accessable
Click to expand...
Click to collapse
Hi ..very sorry..not using z2 plus for a long time..I forgot the process what I did..I followed the steps mentioned there.

Softbricked axon 7, need help !

Hey guys, I have a A2017 axon 7, and I tried to upgrade from Marshmalow to nougat by flashing the B04 update from TWRP. I have now the factory recovery mode, and when I try to go in fastboot, it tries to launch the bootloader( which just tells me that my device software cannot be checked for corruption and that I need to lock my bootloader). When I try to boot normally it stays on the same "bootloader screen" and tells me to press the start button which makes the phone display the linux logo.... I'm a bit lost, I'm on ArchLinux could you pls help me ?
Thx !

Dr_Raider said:
Hey guys, I have a A2017 axon 7, and I tried to upgrade from Marshmalow to nougat by flashing the B04 update from TWRP. I have now the factory recovery mode, and when I try to go in fastboot, it tries to launch the bootloader( which just tells me that my device software cannot be checked for corruption and that I need to lock my bootloader). When I try to boot normally it stays on the same "bootloader screen" and tells me to press the start button which makes the phone display the linux logo.... I'm a bit lost, I'm on ArchLinux could you pls help me ?
Thx !
Click to expand...
Click to collapse
Well, you should use MiFlash and install the stock system through EDL. The problem is that MiFlash is for Windows x64. if you could get a win10 x64 pc, you could fix it in a minute.
Or get to the recovery if you can, and flash Nougat again but via an SD card. But maybe you won't be able to get to the recovery mode

Choose an username... said:
Well, you should use MiFlash and install the stock system through EDL. The problem is that MiFlash is for Windows x64. if you could get a win10 x64 pc, you could fix it in a minute.
Or get to the recovery if you can, and flash Nougat again but via an SD card. But maybe you won't be able to get to the recovery mode
Click to expand...
Click to collapse
I need help! I wanted to relock the bootloader but then I coulnd't enter the recovery or fastboot anymore. When I press any combination it always turn on for 1 sec and then the screen turns off again but it still GOT recognized as QUSB Bulk. After I installed MiFlash the device is recognized as QDLOADER 9008. I didn't flash anything and I don't kno how to unbrick my device now .
I use the A2017G model btw.

Kantastisch said:
I need help! I wanted to relock the bootloader but then I coulnd't enter the recovery or fastboot anymore. When I press any combination it always turn on for 1 sec and then the screen turns off again but it still GOT recognized as QUSB Bulk. After I installed MiFlash the device is recognized as QDLOADER 9008. I didn't flash anything and I don't kno how to unbrick my device now .
I use the A2017G model btw.
Click to expand...
Click to collapse
How did you relock the bootloader? If you used a guide, you should have found a warning, and if you used axon7toolkit a message should've popped up.
You messed up. Real bad. You are probably on DFU mode, and the only ways to get out of there are:
-discharge the battery completely and try to enter FTM mode (i think you have to do that while it is connected to a PC), I think it was with volume down + power. this method works for very few people. If you enter ftm mode, issue 'adb reboot edl' and use MiFlash right away with a FULL_EDL package
-use the 4th category brick repair manual (disassemble the phone, short some pins)

Choose an username... said:
How did you relock the bootloader? If you used a guide, you should have found a warning, and if you used axon7toolkit a message should've popped up.
You messed up. Real bad. You are probably on DFU mode, and the only ways to get out of there are:
-discharge the battery completely and try to enter FTM mode (i think you have to do that while it is connected to a PC), I think it was with volume down + power. this method works for very few people. If you enter ftm mode, issue 'adb reboot edl' and use MiFlash right away with a FULL_EDL package
-use the 4th category brick repair manual (disassemble the phone, short some pins)
Click to expand...
Click to collapse
I think DFU Mode is when I get recognized as ZTE Handset diagnostic .... according to this guide : https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898) It's a2017 but still.
"Axon 7 restore manual from bricked conditions when only ZTE Handset Diagnostic Interface(DFU) (COM...) mode is detected"
But I get recognized as QDloader 9008 and miflash also recognizes it as com10 or something.

Kantastisch said:
I think DFU Mode is when I get recognized as ZTE Handset diagnostic .... according to this guide : https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898) It's a2017 but still.
"Axon 7 restore manual from bricked conditions when only ZTE Handset Diagnostic Interface(DFU) (COM...) mode is detected"
But I get recognized as QDloader 9008 and miflash also recognizes it as com10 or something.
Click to expand...
Click to collapse
it's not necessarily like that. DFU mode is just a mode in which the phone can be. Sometimes Windows just installs the QDLoader driver even though it's not EDL. and if you tried miflash and it didn't work, then it's most probably that.
There's a way to check. If you go to Properties, there should be a number that identifies the mode. if you google it and 'dfu interface' appears, then you are dfu-bricked
But if you locked the bootloader without being fully stock then it's most probably dfu bricked anyways
Again, how did you lock the bootloader?

I don't actually know if I really locked the bottloader.
So, I had unlocked bootloader and twrp. I just bootet into the bootloader, typed "fastboot oem lock" in adb and it said OK on the PC.
But on the phone it never asked me if I want to lock it or anything. And I never said MiFlash isn't working. It recognizes my phone but i judt didn't TRY to flash anything because I didn't want to make the situation even worse perhaps

Choose an username... said:
it's not necessarily like that. DFU mode is just a mode in which the phone can be. Sometimes Windows just installs the QDLoader driver even though it's not EDL. and if you tried miflash and it didn't work, then it's most probably that.
There's a way to check. If you go to Properties, there should be a number that identifies the mode. if you google it and 'dfu interface' appears, then you are dfu-bricked
But if you locked the bootloader without being fully stock then it's most probably dfu bricked anyways
Again, how did you lock the bootloader?
Click to expand...
Click to collapse
I don't actually know if I really locked the bottloader.
So, I had unlocked bootloader and twrp. I just bootet into the bootloader, typed "fastboot oem lock" in adb and it said OK on the PC.
But on the phone it never asked me if I want to lock it or anything. And I never said MiFlash isn't working. It recognizes my phone but i judt didn't TRY to flash anything because I didn't want to make the situation even worse perhaps

Kantastisch said:
I don't actually know if I really locked the bottloader.
So, I had unlocked bootloader and twrp. I just bootet into the bootloader, typed "fastboot oem lock" in adb and it said OK on the PC.
But on the phone it never asked me if I want to lock it or anything. And I never said MiFlash isn't working. It recognizes my phone but i judt didn't TRY to flash anything because I didn't want to make the situation even worse perhaps
Click to expand...
Click to collapse
Lol it doesn't ask you if you want to lock it, that's the point with bootloader mode. there's no system, no UI, and you make stuff via commands.
This is why you shouldn't even attempt this kind of stuff without knowing how it works. At least if you had used axon7toolkit, it would've told you not to.
Find a FULL_EDL package for your model. If you have an A2017, simply use this one:
https://androidfilehost.com/?fid=817550096634790942
or
https://mega.nz/#!JqwEUDCa!lW3NDaBNbmMxhtw6XajspHBJaaEmLC8uNvMZS5ww0EQ
(they are the same file)
Unzip it, leave the folder somewhere handy, put the phone in what you believe is EDL, open MiFlash and select the folder, and flash

Choose an username... said:
Lol it doesn't ask you if you want to lock it, that's the point with bootloader mode. there's no system, no UI, and you make stuff via commands.
This is why you shouldn't even attempt this kind of stuff without knowing how it works. At least if you had used axon7toolkit, it would've told you not to.
Find a FULL_EDL package for your model. If you have an A2017, simply use this one:
https://androidfilehost.com/?fid=817550096634790942
or
https://mega.nz/#!JqwEUDCa!lW3NDaBNbmMxhtw6XajspHBJaaEmLC8uNvMZS5ww0EQ
(they are the same file)
Unzip it, leave the folder somewhere handy, put the phone in what you believe is EDL, open MiFlash and select the folder, and flash
Click to expand...
Click to collapse
Yeah, I screwed up, I know. But what is the point of flashing a full edl package for the phone if I have to put the phone in "what I believe id edl mode"?
And what shall I do if I succeed at something? Besided that, I can't find any EDL package for the A2017G?
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
This guide tells me NOT TO flash anything on a2017g...

Kantastisch said:
Yeah, I screwed up, I know. But what is the point of flashing a full edl package for the phone if I have to put the phone in "what I believe id edl mode"?
And what shall I do if I succeed at something? Besided that, I can't find any EDL package for the A2017G?
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
This guide tells me NOT TO flash anything on a2017g...
Click to expand...
Click to collapse
Okay let me tell you this real straight. I have done this. I have the G packages, I just thought you were the op for some reason. Look at the back of the phone and confirm whether you have an A2017G or an A2017 just in case, or you might mess up even more, as hard as that can be.
at any rate, your fears are all dumbfounded, because in the situation that you are in, you have 3 options:
a) disregard all the help that i'm trying to give you, even though I have already done the process; and keep your brick on a shelf.
b) search on google or xda yourself, then do the process, without bothering here with your lack of trust
c) follow my advice and do the damn process
Whichever option you choose, I'm gonna leave the package here:
https://mega.nz/#!UrxCRCrQ!a4sXVFu5oqct2sWStfN_luGpN5HEGXxE4FcrRteagQ4
or
https://androidfilehost.com/?fid=961840155545591863
Again, I HAVE FOLLOWED THE 4TH CATEGORY BRICK REPAIR GUIDE AND FIXED MY G. I flashed stuff through EDL at least 10 times. And there wouldn't be a bunch of EDL packages for the G if they had a 100% chance of bricking your phone
So. If you decide to do this, turn your phone off. connect the USB cable to the PC but not the phone. Hold both volume buttons (but not the power button) and insert the USB cable at the same time. Then fire up MiFlash and try to flash the file (you have to unzip the folder, then select the folder on miflash, then flash. Here 2 things may happen:
a) it flashes and you can just go bother someone else
b) it doesn't and you have to follow the 4th category brick repair guide
Simple as that. if it fails, you might want to check if the 'Qualcomm HS-USB QDLoader 9008' is actually EDL mode or DFU mode, so you can do that by going to properties and checking some device identifier number on google (haven't done that, i just read that it can be done somewhere here).

Choose an username... said:
Okay let me tell you this real straight. I have done this. I have the G packages, I just thought you were the op for some reason. Look at the back of the phone and confirm whether you have an A2017G or an A2017 just in case, or you might mess up even more, as hard as that can be.
at any rate, your fears are all dumbfounded, because in the situation that you are in, you have 3 options:
a) disregard all the help that i'm trying to give you, even though I have already done the process; and keep your brick on a shelf.
b) search on google or xda yourself, then do the process, without bothering here with your lack of trust
c) follow my advice and do the damn process
Whichever option you choose, I'm gonna leave the package here:
https://mega.nz/#!UrxCRCrQ!a4sXVFu5oqct2sWStfN_luGpN5HEGXxE4FcrRteagQ4
or
https://androidfilehost.com/?fid=961840155545591863
Again, I HAVE FOLLOWED THE 4TH CATEGORY BRICK REPAIR GUIDE AND FIXED MY G. I flashed stuff through EDL at least 10 times. And there wouldn't be a bunch of EDL packages for the G if they had a 100% chance of bricking your phone
So. If you decide to do this, turn your phone off. connect the USB cable to the PC but not the phone. Hold both volume buttons (but not the power button) and insert the USB cable at the same time. Then fire up MiFlash and try to flash the file (you have to unzip the folder, then select the folder on miflash, then flash. Here 2 things may happen:
a) it flashes and you can just go bother someone else
b) it doesn't and you have to follow the 4th category brick repair guide
Simple as that. if it fails, you might want to check if the 'Qualcomm HS-USB QDLoader 9008' is actually EDL mode or DFU mode, so you can do that by going to properties and checking some device identifier number on google (haven't done that, i just read that it can be done somewhere here).
Click to expand...
Click to collapse
THANKS SO MUCH , you saved my ass, it flashed without a problem and sorry for bothering you. Bootloader is locked now and it works fine. Thanks again!

Hard Bricked 6T (No TWRP, OEM locked, MSM not working)

Hello dear community,
I've been playing with my 6t for a long time, hundreds of custom roms, kernels, etc..
Lastly I went to official oxygen 10. I tried to install twrp via fastboot but every time I tried to push the files, I would get a error. I reinstalled drivers, tried different ports, different tools..
I got mad and blindly followed some article where someone suggested putting "persist" in the fastboot command, I tried it, I thought it is some kind of "force push" the file and that is how I probably corrupted persist partition. DUMB
Phone not booting of course and I went to restore it with Msmdownload tool.
It did not fixed it.
I tried different versions of msm, I tried going to Hydrogen, tried different USB ports, tried type C ports, different PCs...
No luck, phone is stuck at bootloop, with no TWRP and bootlocked.
I read somewhere that Msmdownload tool is not flashing persist partition and I assume that is the reason why my phone can't be restored.
Fastboot commands are not working anymore and EDL mode is probably the only possible way to communicate with the device.
I live in Montenegro and I can't send phone to oneplus to repair it.
I searched the threads and noticed that some users with similar problem eventually succeed to restore the phone by flashing it with Msm multiple times. I am still trying to do it but no luck.
I would really appreciate help from dev mastermind.
Thank you!

If your bootloader is locked again, i think it is not possible to use Msn tool. I think the only way is to send it for repair if you can't boot the phone.
But maybe i'm wrong and someone else know the sollution.

Deurklink73 said:
If your bootloader is locked again, i think it is not possible to use Msn tool. I think the only way is to send it for repair if you can't boot the phone.
Click to expand...
Click to collapse
Thank you for response, but I think that msmdowload tool is made mainly to be able to flash even locked bootloaders, although I am not 100% sure...

Papagaj said:
Thank you for response, but I think that msmdowload tool is made mainly to be able to flash even locked bootloaders, although I am not 100% sure...
Click to expand...
Click to collapse
You are correct. Msm tool will work on locked bootloader.

Man that sucks. Seems like you might be screwed. I screwed up a couple times getting to A10 but I was able to get msm tool to work for me. You are using it while your phone is powered off, correct?

Try different version of android with msm tool. Like try using the Android 10 msm tool then try the Android 9 msm tool

GeekMcLeod said:
You are using it while your phone is powered off, correct?
Click to expand...
Click to collapse
Hi GeekMcLeod, That's right, I boot it in bootloader mode, select "turn off" just to be sure that phone is shut down. And then I hold volume up and volume down together and plug the cable so it goes in EDL mode. Windows recognize it just as Qualcomm HS-USB QDLoader 9008, and that is all right I think.
Then I start MSMdownload tool and it flashes everything in around 200 seconds. I leave phone pluged in while it try to boots, but it never boot up. I left it for 45 minutes but still nothing...

jamescable said:
Try different version of android with msm tool. Like try using the Android 10 msm tool then try the Android 9 msm tool
Click to expand...
Click to collapse
I tried several versions. I was hoping to find Android 10 tool for oneplus 6t but it is still not available.

Papagaj said:
Hi GeekMcLeod, That's right, I boot it in bootloader mode, select "turn off" just to be sure that phone is shut down. And then I hold volume up and volume down together and plug the cable so it goes in EDL mode. Windows recognize it just as Qualcomm HS-USB QDLoader 9008, and that is all right I think.
Then I start MSMdownload tool and it flashes everything in around 200 seconds. I leave phone pluged in while it try to boots, but it never boot up. I left it for 45 minutes but still nothing...
Click to expand...
Click to collapse
Sounds like a driver problem to me. Try gathering a few (by Google, OnePlus, perhaps even Samsung) and keep trying different ones. I had to do this on my OnePlus One years ago. Then suddenly I found one that worked and I could revive it back from the dead. Not saying that it would work for you but it might. In my case it was a Qualcomm tool. If you still end up with nothing but dead ends today, I'd initiate a chat with OnePlus on this page (select your country at the bottom of the page first).
Wrapped with delicious Fajita [emoji896]

The only solution is to use smt mode inside msmdownloadtool, which will restore persist partition, but with some disadvantages.
Be aware that you WILL LOSE YOUR IMEIs and WIDEVINE L1, use it at your own risk.
If you decide to do it (remember you WILL LOSE YOUR IMEIs and WIDEVINE L1!) follow this:
1.- Run MSMDownloadTool.
2.- Click on Verify and wait till it says "MD5 Check OK!".
3.- Then click on SMT Mode.
4.- Then click on Start like you would normally do with upgrade mode.
5.- The you need to enter as password "te123" and select your phone's capacity.
6.- If it says something like "Port disabled by user", go to the top left corner and click on "SMT", "COM Setup" and check everything, then click on the left button, and retry steps 4-5.
7.- When the process finishes the phone won't reboot, so you'll need to hold VolumeUP+Power until it powers on, then wait around 5 minutes and your phone will be back to life!!
8.- If you have an IMEI backup, just follow this guide (https://forum.xda-developers.com/oneplus-6t/how-to/guide-oneplus-6t-unlock-bootloader-t3851789) (I don't know if this is the correct way to post links)
I hope you get your phone fixed.

Papagaj said:
Hi GeekMcLeod, That's right, I boot it in bootloader mode, select "turn off" just to be sure that phone is shut down. And then I hold volume up and volume down together and plug the cable so it goes in EDL mode. Windows recognize it just as Qualcomm HS-USB QDLoader 9008, and that is all right I think.
Then I start MSMdownload tool and it flashes everything in around 200 seconds. I leave phone pluged in while it try to boots, but it never boot up. I left it for 45 minutes but still nothing...
Click to expand...
Click to collapse
Don't go to edl mode. Just have your phone powered off and use msm tool. I used it a couple times while getting to A10 and I only ever had to power my phone off.

amt911 said:
The only solution is to use smt mode inside msmdownloadtool, which will restore persist partition, but with some disadvantages.
Be aware that you WILL LOSE YOUR IMEIs and WIDEVINE L1, use it at your own risk.
If you decide to do it (remember you WILL LOSE YOUR IMEIs and WIDEVINE L1!) follow this:
1.- Run MSMDownloadTool.
2.- Click on Verify and wait till it says "MD5 Check OK!".
3.- Then click on SMT Mode.
4.- Then click on Start like you would normally do with upgrade mode.
5.- The you need to enter as password "te123" and select your phone's capacity.
6.- If it says something like "Port disabled by user", go to the top left corner and click on "SMT", "COM Setup" and check everything, then click on the left button, and retry steps 4-5.
7.- When the process finishes the phone won't reboot, so you'll need to hold VolumeUP+Power until it powers on, then wait around 5 minutes and your phone will be back to life!!
8.- If you have an IMEI backup, just follow this guide (https://forum.xda-developers.com/oneplus-6t/how-to/guide-oneplus-6t-unlock-bootloader-t3851789) (I don't know if this is the correct way to post links)
I hope you get your phone fixed.
Click to expand...
Click to collapse
@Papagaj do this....thats the only fix....I purposely wipe persist for to test something and I did that to recover from the boot loop.. persist store sensor information that vital to getting phone to boot....that's why it not booting..kernel is look for the sensor info but can't find it

Timmmmaaahh said:
Sounds like a driver problem to me. Try gathering a few (by Google, OnePlus, perhaps even Samsung) and keep trying different ones. I had to do this on my OnePlus One years ago. Then suddenly I found one that worked and I could revive it back from the dead.]
Click to expand...
Click to collapse
Timmmmaaahh I am so glad to see you on my thread! I learned fundamentals of flashing on your guides back in Bacon days, and never bricked it even once! But this A/B partitions really gave me headaches....
It is highly likely that drivers are causing problem, I tried to flash it with msm tool on fresh windows where I let it to automatically download required drivers and the msm progress appear to be same as when I used drivers which are recommended by msmtool developer. I will try several more and will be back with results within few hours.
amt911 said:
The only solution is to use smt mode inside msmdownloadtool, which will restore persist partition, but with some disadvantages.
Be aware that you WILL LOSE YOUR IMEIs and WIDEVINE L1, use it at your own risk.
8.- If you have an IMEI backup, just follow this guide
Click to expand...
Click to collapse
Is there a way to backup IMEI and WIDEVINE L1 at this moment? I think it is highly unlikely because functionality is limited to EDL only....
Or is there a way I can restore it later if I manage to fix a device with smt mode?
GeekMcLeod said:
Don't go to edl mode. Just have your phone powered off and use msm tool. I used it a couple times while getting to A10 and I only ever had to power my phone off.
Click to expand...
Click to collapse
How do you mean? I can't get phone connected with msm tool if it is not in EDL mode.. It is not recognized when in stock recovery, bootloader or trying to boot up OS, that is only three states this phone can be at the moment.

Papagaj said:
Timmmmaaahh I am so glad to see you on my thread! I learned fundamentals of flashing on your guides back in Bacon days, and never bricked it even once! But this A/B partitions really gave me headaches....
It is highly likely that drivers are causing problem, I tried to flash it with msm tool on fresh windows where I let it to automatically download required drivers and the msm progress appear to be same as when I used drivers which are recommended by msmtool developer. I will try several more and will be back with results within few hours.
Is there a way to backup IMEI and WIDEVINE L1 at this moment? I think it is highly unlikely because functionality is limited to EDL only....
Or is there a way I can restore it later if I manage to fix a device with smt mode?
How do you mean? I can't get phone connected with msm tool if it is not in EDL mode.. It is not recognized when in stock recovery, bootloader or trying to boot up OS, that is only three states this phone can be at the moment.
Click to expand...
Click to collapse
Nope....just rewrite you IMEI with a Qualcomm tool..quite a few available

Papagaj said:
How do you mean? I can't get phone connected with msm tool if it is not in EDL mode.. It is not recognized when in stock recovery, bootloader or trying to boot up OS, that is only three states this phone can be at the moment.
Click to expand...
Click to collapse
Oh. The few times I used it I just powered off my phone and connected it to my computer. Started msm tool and it did its thing.

Papagaj said:
this A/B partitions really gave me headaches
Click to expand...
Click to collapse
You and me both! ? lol...

I recently got stuck in a weird bootloop thing with a, what i think was, corrupted boot.img. Try finding a stock android boot.img, boot to fastboot, and run the command fastboot flash boot <boot.img> on both partition A and B. If you can't find a stock boot.img, i managed to find one and can link to a download.

All right, here is the situation.
I finally managed to boot up the phone. amt911 gave working instructions on post #10. Thank you bro, you are awesome, and Thank you Tech_Savvy for confirming the method, you are badass who deletes partitions just for fun!
All right I got the phone booted up but as amt911 mentioned, I lost my IMEI numbers, without IMEI numbers you can't dial numbers, receive calls or use mobile data.
BACKUP IMEI NUMBERS FOLKS, you never know when the partitions will screw you over!
I was dumb one without backup and I had to contact Oneplus support for help. I was suprised how quickly I got into communications with one of the assistants.. in less than 10 seconds.
They ask you to do full reset via stock recovery and some other basic troubleshoots, after nothing, obviously, fix the missing IMEI they will arrange remote session to get your phone fixed.
You have to persist on remote session as some of assistants told me that I have to send the phone to repair.
Before they arrange session for you, you need to show them "proof of the purchase" ALSO KEEP THAT FOLKS I lost mine long time ago but luckily I found photo of invoice I took when I bought phone, phew*
I didnt have it at first when I contacted them and they say there is nothing they can do without a proof! DON'T STEAL PHONES FOLKS and then ask for support...
They will contact me for session within 48 hours and I will share the experience here.
Thank you again people!

JTVivian said:
I recently got stuck in a weird bootloop thing with a, what i think was, corrupted boot.img. Try finding a stock android boot.img, boot to fastboot, and run the command fastboot flash boot <boot.img> on both partition A and B. If you can't find a stock boot.img, i managed to find one and can link to a download.
Click to expand...
Click to collapse
Thank you JTVivian for helpful suggestion, but that method would not work. When your bootloader is locked, fastboot commands are useless, you can't flash anything.

Papagaj said:
Thank you JTVivian for helpful suggestion, but that method would not work. When your bootloader is locked, fastboot commands are useless, you can't flash anything.
Click to expand...
Click to collapse
Ah you're right, i wasn't sure if that was the case but i thought i'd throw out the suggestion anyways.

device bricked by itself..? unable to boot or charge

i shut down my device by tapping power off. then removed sim card and sd card after screen went black. but when i tried to power on, it doesnt respond.. i tried holding the power button for 10s, it gives me a black screen and vibrates and instantly closes again.. so i cant boot into recovery, i cant boot to fastboot, and its unreadable on pc, it doesnt charge, no bootlogo, nothing. just bricked..
.
i dont know why, but it just bricked by itself.. i've been using mokee 9 date of 1/1/2020 thats the last update i installed, with add on su and everything was working perfectly and even if i reboot multiple times..
bootloader was unlocked so xiaomi centers wont help me..
how is it possible to make it boot again? i mean like wtf even happened? i did nothing.. i didnt flash anything and system was READ ONLY before powering off.. all i did was remove sim and sd cards... even after flashing mokee updates yesterday, it booted normally and idk what's going on..
any help?
EDIT: the phone's hard disk IC was damaged. I went to a tech guy and he changed it but then the motherboard broke entirely after flashing the qcn file for imei. Device out of warranty of course because of the damn bootloader. Thank you xiaomi for the great phone that only lasted one month before dying completely.

attempt 2
in attempt 1 i tried force reboot as mentioned, didnt work
attempt 2 : i tried force reboot while plugged to pc, this showed up

attempt 3
i tried to flash a new firmware, but device unreadable. must be on fastboot mode for mi flasher to be able to read it. im starting to lose hope.. the device is new though it makes me sad

on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything, because it didnt actually boot into EDL mode, had to open my device physically and use test points. so attempt 4 failed

does this mean fastboot works?
after attempt 4, it said successful so if fastboot works like that then i can flash stock boot.img or something.. right? which image should i start with

forum
boody shaban said:
on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything. so attempt 4 failed
Click to expand...
Click to collapse
this is the forum of the bricked phone similar to mine, except that i didnt try any flash like him it just happened randomly
https://c.mi.com/thread-2334646-1-0.html

attempt 5
attempt 5 failed, i tried flashing whole firmware one by one, i started with vbmeta, then recovery but it failed. idk what to do

notice
i have noticed that it only flashes small img files, if its 100kb or more it will fail. maybe due to device restart because the only way to make it read in fastboot mode is to force restart multiple times until it flashes. what to do now?

attempt 6
so according to this video
https://www.youtube.com/watch?v=yJoIiLE_w3w
he installed a driver (name in attachment) then refreshed on mi flash so his device became readable on mi flasher
i tried that but it didnt work.

final attempt.. out of hope
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.

boody shaban said:
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.
Click to expand...
Click to collapse
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.

Reason for brick
cg730620 said:
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.
Click to expand...
Click to collapse
Yes, I hate tearing up my device so I took it to a professional. He failed to open ADL but he did the 9008. Now he waits some kind of credit. Not sure if for the app to work or for the bootloader to unlock, although it was already unlocked but maybe somehow got locked..
Any way, expected reason for brick is either latest magisk module, or kernel tweaks..

I gave the device to a professional, but he also failed to flash it even with test point. He said he was searching for a file.. I dont remember its name, something like IMOH..

Now I need to know any possible reason that might brick my phone again to avoid it
cg730620
Click to expand...
Click to collapse

cg730620 said:
.
Click to expand...
Click to collapse
The app he used was called ultimate multi tools

test point attempt failed
i did the test point, booted to 9008 mode but still nothing.

i think i know why the phone got bricked by itself, it got ARB stands for AUTOROLLBACK
read more about it here https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
bootloader got automatically locked again.

Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
boody shaban said:
i did the test point, booted to 9008 mode but still nothing.
Click to expand...
Click to collapse
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/

cg730620 said:
Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/
Click to expand...
Click to collapse
but im sure i have all drivers installed in fact i used mi flash more than once and it worked perfectly fine, and i swear i didnt try to lock it or anything, what happened is, mokee auto updates installed add on magisk and it was the latest version so i think this might have bricked it. idk..

ok i downloed all the drivers and reinstalled them, same error : "library not registered"