Database Users

Thread closed

Install CM14 for OnePlus X (The Unofficial)
** How to Install TWRP for the 3.1.0 version you installed Oxygen.
B1: Starting Fastboot mode by turning off the power on. Then hold down + to the source.
Step 2: Install the driver and connect to the computer (HD drivers installed on the network to find it)
B3: Run cmd (run -> cmd) command fastboot boot attachments and enter this download Mod edit link removed
B4: boot into TWRP Self.
** The Stock 2.2.2 ROM you are using the network attempt to open up the OEM and then down Flashfy unbootloader install TWRP on CM ROMs directly or similar 13 and then into TWRP always offline.
** Note: Back up your data before doing us avoid errors arising restore offline.
** Download ROM CM 14: Mod edit link removed
** Link Download Grapps:Mod edit link removed
** Conducted into TWRP and wipe data, cache partitioning, Dalvik Cache. Flash ROM + Grapps and restart.
This is an experiment with me what errors arise not responsible. For those you love to dabble and discourage those you do not know and do not understand anything. People are already getting a bit bored Android does not dabble to dabble like new. : D
Path: Mod edit link removed
Vietnamses : Mod edit link removed

downloading, will report back soon.

Cam on
Thanks much

Post some screenshots.

failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too

Well, this is interesting.. The step-by-step guide is a bit confusing though. I will download and try the 'ol good method of flashing ROM, gapps and supersu. Hope it works!

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app

be_are said:
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
here you go: https://drive.google.com/file/d/0B_Km0FbYnea1aDdIaTEydElhUkk/view?usp=sharing

twrp has not made it to 3 ox you have to use a downgrade to get a fresh start using unbrick method, (keep flashable backup via flashify) get twrp installed with the new (old) boot loader, flash cm14+ext. and you are done.
if you had cm13 or the likes, please confirm if you CAN upgrade to 14 before ox people start trying to install without knowing if it even has android 6 (last update i saw on the branch was from june 7 so idk)
teamwin does not have twrp for the ox 3 on oneplus x yet (on their releases anyway) so you have to follow some other process to downgrade to a twrp'able os (and a backup) before trying yo install this
if i see any info from people who have been able to update (and if it has android 7) i'll try to make a video on the process (in white, Texan english)

Please remove this page.

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.

ksigit said:
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
Click to expand...
Click to collapse
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

namquang93 said:
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
Click to expand...
Click to collapse
Looks like a successful install to me. Could you provide twrp logs?

With whose permission did you post this build here ? Don't you think there was a reason that even after a complete build of CM14 it was still not posted to the forums ?
I am asking you, as politely as possible, to remove the links and this fake procedure, when N is ready, it will be shared, you might find phony builds or legit but non working ones on the interweebz, that doesn't mean it gives you the right to share it just because you think its cool, because its not.
Take it down.
EDIT: Sure, if you build yourself and want to share it then you're more than welcome.

And then they will cry if things are broken !! Take it down folk !
Sent from my ONE E1003 using XDA-Developers mobile app

This Build was just a test build, what made u think that i will not post it here on xda if the rom booted? We, the team are working to make it work but yeah dont post the builds from afh here, will update u all for sure when its done. I think it was my mistake to not to make that build private. -_-

It flashes successfully but doesn't boot, goes back into recovery. Still, great work.

congrats for succesfull starter build
hats off !!!!! to you guys ([/B]developers off this rom) :good:

Flashed with/without gapps. Doesn't boot - goes back 2 recovery

foster095 said:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
Click to expand...
Click to collapse
Kindly refer to the developer's post, POST #16

Lollipop 5.0 for Lenovo A536

Lollipop 5.0 for Lenovo A536 by darklord4822 and SRT team
language:multilanguage(including english)
screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note
Firmware 5.0 based on 3.10.54 kernel.
INSTALLATION And Download (TWRP)
Before flashing backups first and then Wipe data and cache (optional-others caches etc)
*Download: Lollipop 5.0 (ROM)
*Download GAPPS
*Flash Lollipop 5.0 spflash
*Flash Gapps (use lollipop version)
PATCHES
Download: Patch for Lollipop 5.0
Download: Boot_lp_rev1.img - Fixed connection / disconnection headphones + fix photos with flash
Download: Boot_lp_rev2.img - For those who have issues with front camera and auto-rotation
Download: Boot_lp_rev3.img - For those who working front camera, but no auto-rotation
Download: Boot_lp_rev3.img - For those who issue with front camera, but works auto-rotation

Boot_rev1.img is this can flash on CM12.1 LENOVOA536?

renren28 said:
Boot_rev1.img is this can flash on CM12.1 LENOVOA536?
Click to expand...
Click to collapse
No,can you explain which cm 12.1,If you are using cm 12.1 based on kernel 3.4.67 ,please dont do it, it may brick your device.The patches are exclusively for this rom.(3.10 kernal)

How to install the .img files?

NichLhuigi said:
How to install the .img files?
Click to expand...
Click to collapse
Tap on Install in the TWRP main screen.
Now, the default mode is to flash zip files, you will need to toggle the mode to images.
To do so, tap on the Images… button on the bottom-right of the screen.
The recovery will now only see the image files, select the one you desire to flash, this could either be a system or boot image file.
Once you select, you will be prompted to select the type of image it is, select Boot or system corresponding to the image file you selected.
Finally, swipe the button on the bottom of the screen to start the flashing process.

how to fix autofocus ?

Trying to install this Lollipop 5.0 using TRWP Recovery 3.0.0. and get the 'Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Someone please advise and thanks in advance.

Lazerkitty said:
Trying to install this Lollipop 5.0 using TRWP Recovery 3.0.0. and get the 'Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Someone please advise and thanks in advance.
Click to expand...
Click to collapse
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.

test_only said:
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.
Click to expand...
Click to collapse
Yeah did that. Works but it has some problems and also, it says its for Lenovo S660.
There are problems with the ROM as it keeps asking if I want to switch to SD card as default write disk, screen flickers bad...and its identifying the phone as a different model which can cause problems installing other apps not intended for this model....I'm guessing that last part.
Right now I am trying to find the latest stable Marshmallow ROM and not seeing one that works.
Any ideas? Too bad there is no Resurrection Remix ROM for this model.
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
test_only said:
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.
Click to expand...
Click to collapse
Thank you for the reply and support :fingers-crossed:

Please help me
After i installed the rom
I turned my phone on
And then all the things is working
But the wifi is not
It always says authenticating and then
After that it says authentication problem or something pelase help btw i tried doing the
Advamced options but its not working please help

Josh Lovv said:
Please help me
After i installed the rom
I turned my phone on
And then all the things is working
But the wifi is not
It always says authenticating and then
After that it says authentication problem or something pelase help btw i tried doing the
Advamced options but its not working please help
Click to expand...
Click to collapse
Check your wifi password if incorrect

Aweome ROM but autofocus is a problem. Any ideas, please?

Hi all
This is just the best ROM for my phone I've found, love it, but autofocus doesn't work with any of revisions of boot. I see the autofocus question still has no answer, that's very sad. Am I forced to upgrade to CM because of autofocus only? I like this vanilla Lolipop very much, everything works just great, battery runs 1,3 times longer than on stock Lenovo ROM
Let me know if I can help with testing
Thanks!

[Recovery][MI 8 SE] TWRP recovery 3.2.3 update 27th Dec by LR.Team/wzsx150

Xiaomi 8 SE *only*
** Update 1227 **
Original post:
http://www.miui.com/thread-15964692-1-1.html
Mirror:
https://drive.google.com/drive/folders/1IeCtb6vRO4CRe76s0BD_5TQiSnymPBTT
------------------------------------------------------------------------------------
2018.12.27 update content:
1. Update the problem of repairing the new version of rom into twrp
2018.12.17 update content:
1. Update to fix some oil can not get twrp problem, repeatedly restart into fastboot mode
2018.11.02:
1. Update support official Android 9 rom
2. Update and optimize some functions
3. Increase automatic The option to restart after the upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box to not restart. It is convenient to perform some operations after the automatic upgrade to prevent the twrp from being overwritten, etc.
2018.9.28 update:
1. Add support to remove Dm checksum cancels the forced encryption function. The removal of the dm check function is mainly to prevent the card screen caused by the dm check and to prevent the official rec from covering the twrp.
Cancel the forced encryption function is used to permanently decrypt the data, you need to format the data, otherwise you can not enter the system, do not understand the machine is not recommended. Please be careful! !
2. Update the built-in magisk to 16.6, which is said to be the latest version of the card screen. The updated version will cause the card screen. At the same time fix the bug that the built-in magisk can't brush the module.
TWRP v3.2.3 2018.8.10 update:
1. Update to 3.2.3
2. Support new version official rom
3. Added signature boot and restore official rec and other functions
4. Built-in magisk 16.3, it is said that the high version will be card screen
5. Update the decryption data mechanism, theoretically decrypt the data more stable Some
---------------------------------------------------------------------------------------
v3.2.1 didn't work flashing treble GSI, anyone have any experience with this version?

how to update to this version

Can we resize the system, data and cache partitions with this version?

Lollipopx said:
how to update to this version
Click to expand...
Click to collapse
See q792602257's thread -
https://forum.xda-developers.com/mi-8/development/recovery-twrp-recovery-3-2-1-mi8se-t3813311
Or if you have TWRP already, just flash the new zip here from TWRP.

Hi! I don't read Chinese. Can you check if there's an update for Mi 8? Thanks!

samwise110712 said:
Hi! I don't read Chinese. Can you check if there's an update for Mi 8? Thanks!
Click to expand...
Click to collapse
Mirror：https://drive.google.com/file/d/17AhL4J4qTyfp6djM_CetU3Y-gpmyifel/view?usp=drivesdk
TWRP 3.2.3-0806 for mi 8

Everythings work fine but language is set to Chinese. Here's just the way i change to English. FYI.
https://www.hellpc.net/how-to-change-language-in-twrp-recovery-to-english/

When this thread will be moved to Mi 8 SE Forum?
---------- Post added at 04:09 PM ---------- Previous post was at 04:07 PM ----------
isn't there any guide on how to flash?

t.me/joinchat/AAAAAEyDBlEI7z1R7HsXZw

danielwright said:
See q792602257's thread -
https://forum.xda-developers.com/mi-8/development/recovery-twrp-recovery-3-2-1-mi8se-t3813311
Or if you have TWRP already, just flash the new zip here from TWRP.
Click to expand...
Click to collapse
Is that possible to ask the author to make one TWRP for Mi 8 EE(Ursa)??

wching02 said:
Is that possible to ask the author to make one TWRP for Mi 8 EE(Ursa)??
Click to expand...
Click to collapse
You can Use the TWRP from MI8 and then you only have to edit the updater script in the custom.rom.zip
0. Use "MI8 TWRP" on "MI8 Explorer Edition" and install custom ROM
1. open downloaded custom "rom.zip"
2. go to -> \xiaomi.eu_multi_MI8Explorer_V10.0.4.0.OEHCNFH_v10-8.1.zip\META-INF\com\google\android\
3. edit -> updater-script
4. change -> getprop("ro.product.device") == "ursa" to getprop("ro.product.device") == "dipper"
5. enjoy

I use this recovery to flash new rom but now i can't find rise to wake any rom i flash.
help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Someone could post last September build?

new one for Android pie support.
https://drive.google.com/drive/folders/1s_m4CImuiTVLLPIzZvhcgkTjhMzPn6so
Not test yet

blu33agl3 said:
new one for Android pie support.
https://drive.google.com/drive/folders/1s_m4CImuiTVLLPIzZvhcgkTjhMzPn6so
Not test yet
Click to expand...
Click to collapse
it worked, //fastboot boot & flash recovery
test on miui8.11.1(cn)

blu33agl3 said:
new one for Android pie support.
https://drive.google.com/drive/folders/1s_m4CImuiTVLLPIzZvhcgkTjhMzPn6so
Not test yet
Click to expand...
Click to collapse
Tested on 8.11.1 from MIUI.EU to install root, it works!thanks!:highfive:

blu33agl3 said:
new one for Android pie support.
Not test yet
Click to expand...
Click to collapse
I test it and its works perfect. I Like wzsxr150 work.

Please help...
Everytime i install TWRP im never able to boot a new rom... ive tried miui.eu and others because i want global but the phone is stuck on the roms screen loading but never starts... no bootloop though...
other than the recovery do u install anything else? any other steps?
ty

manucas said:
Please help...
Everytime i install TWRP im never able to boot a new rom... ive tried miui.eu and others because i want global but the phone is stuck on the roms screen loading but never starts... no bootloop though...
other than the recovery do u install anything else? any other steps?
ty
Click to expand...
Click to collapse
Did you run in twrp data wipe? This is required in the first installation for the xiaomi, eu version

blu33agl3 said:
new one for Android pie support.
https://drive.google.com/drive/folders/1s_m4CImuiTVLLPIzZvhcgkTjhMzPn6so
Not test yet
Click to expand...
Click to collapse
Thanks it works with xiaomi.eu_multi_MI8SE_8.11.1_v10-9
the only workin magisk with this is only up to 16.6 any up version above give bootloop

[HELP] TWRP, Root, & Custom ROM

Sorry for the post, my question didn't really get answered on the General Q&A Nood Friendly Thread:
Xenophoresis said:
I have Android 9 and August 1, 2020 security patch on it (YouTube was mentioning security patches? dunno why).
I would like TWRP and a future goal of changing to Lineage OS/Tissot.
Which rooting guide can I follow?
( I got confused with the available threads.)
Click to expand...
Click to collapse
After posting, I tried follow this guide thread
I was able to do step 1 which is to unlock but, I don't know if I should still be flashing a Stock Fastboot ROM?
Also there is no link for TWRP, or which version of TWRP I should get...
The last time I rooted something was a Galaxy Note 2 back in 2012-ish so my relevant knowledge is definitely expired.
Please give me a lead on where to find the correct TWRP file and further instructions.

you want step by step guide to flash custom rom?
- You have unlocked bootloader?
- what OS version you are on at the moment ?
Dont worry i will help you in best of my knowledge i have been through what you are going after some time i learned answer question and we will begin

Yes, my bootloader is already unlocked and fastboot was enabled.
OS is stock Android 9, Aug 2020 security patch:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No Fastboot ROM (if that is necessary) or TWRP is installed yet.
PS: I do not know where or which TWRP I should be getting for this phone

Xenophoresis said:
Yes, my bootloader is already unlocked and fastboot was enabled.
OS is stock Android 9, Aug 2020 security patch:
No Fastboot ROM (if that is necessary) or TWRP is installed yet.
PS: I do not know where or which TWRP I should be getting for this phone
Click to expand...
Click to collapse
There is a tutorial u can follow on youtube by Vikram, for Pie with August 2020 patch. N u can download what it needs in the description. Its in Indian language but u can follow what he do. Should be okay n safe
Good luck

Lost149ers said:
There is a tutorial u can follow on youtube by Vikram, for Pie with August 2020 patch. N u can download what it needs in the description. Its in Indian language but u can follow what he do. Should be okay n safe
Good luck
Click to expand...
Click to collapse
I was hoping to get instructions or help in English; I've watched his YouTube tutorial in Indian but I was afraid that I'd do something wrong because I didn't understand what he said.

You can follow the instructions provided for LOS:
https://wiki.lineageos.org/devices/tissot/install
Simply exchange the LOS installing part with the ROM of your choice.
Xenophoresis said:
I was hoping to get instructions or help in English; I've watched his YouTube tutorial in Indian but I was afraid that I'd do something wrong because I didn't understand what he said.
Click to expand...
Click to collapse

timeo78 said:
You can follow the instructions provided for LOS:
https://wiki.lineageos.org/devices/tissot/install
Simply exchange the LOS installing part with the ROM of your choice.
Click to expand...
Click to collapse
Thank you, I'm done with the custom rom and root

Sorry for late reply i couldn't login because of xda forum migration process
steps i used:
- install Twrp (download latest version details below)
- download custom rom and gapps (and transfer it into sdcard or internal storage or your phone)
- download Adb/fastboot tool and drivers (download it in windows pc install it details below)
- Install Twrp (download it from https://dl.twrp.me/tissot/) there are 2 files .zip and .img you would need fastboot and adb drivers https://androiddatahost.com/uq6us install adb minimal in location where of your choice copy twrpX.XXXX.img file beside adb/fastboot.exe , from start menu open command prompt right click run as administrator locate to adb/fastboot folder .
Power off your mi a1 when its powerd off hold down volume down and power button until you see fastboot mode on the phone connect it to pc wait for drivers to install let me know if you need in this regard. Inside command prompt run " fastboot devices " if you see device with bunch of numbers below than it means your phone is connected and drivers are working than enter this command " fastboot boot twrpXX.XXXX.img " it will take no more than 5 seconds your phone will turn on into twrp recovery there you can copy twrpxx.xxx.zip file to your internal storage or sd card flash it when its done restart -> Recovery.
Warning: After flashing twrp zip dont restart to system if you do your phone will show you message that phone has been destroyed so dont restart .
- Installing custom roms: download custom rom of your choice transfer it into internal or sd card from twrp install-locate to custom rom .zip file and flash it also keep in mind lots of roms didn't include gapps so you have to download it from opengapps(for android 8-10) and nikgapps(android 11). Flash gapps . Keep in mind after installing custom roms you will lose twrp recovery so if you want twrp at this stage go ahead and install it
- If you want root access download and flash magisk
Its always good practice to keep stock rom and xiaomi flash tool with you just in case if something goes wrong you can reflash stock rom and boot normally.
Let me know if you need help
Cheers

Development [RELEASE THREAD]--_A-Team_--Cricket_Dream_5G

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents
Another Exclusive Release
Supported Model
Cricket Dream 5G
Device Codename
FIH - EC211001
Recoveries
OrangeFox_11 Recovery
PitchBlack_11 Recovery
SkyHawk_11 Recovery
TWRP_11 Recovery
Roms
CricketRom Custom Stock - Android 11
AncientOS Custom GSI - Android 12
ArrowOS Custom GSI - Android 12
CherishOS Custom GSI - Android 12
Corvus Custom GSI - Android 12
CrDroid Custom GSI - Android 12
-AIO ToolKit Prerequisites-
1- Linux: Linux Mint Cinnamon (Suggested)
2- Python 3
3- Pip install Command: sudo apt install python3-pip
-AIO ToolKit -
Unlocks Bootloader
Selection of 4 Installable Recoveries, Pre-Patched with Magisk
Makes Full Device Backup Or Selection Of A Few Various Partitions
2 Generic UnBrick Options(Needs More Testing)
Rom Notes/Disclaimer/Warning
**CricketRom Custom Stock Rom WILL NOT Bypass Carrier Hotspot Limits(Currently, WIP) **
**All Custom GSI Rom Releases Have Working Service, Data, Volte, 5G OOTB**
**All Custom GSI Rom Releases Bypass Carrier Hotspot Limits **
** All Roms Will Flash Magisk 24.3 Patched TWRP Boot Image **
**All Roms Will Flash Custom LK (Cleans Up Unlocked Bootloader Nag Screen) **
**All Roms Use A Custom MTP Service & Script For Insanely Fast Usb Plugged Recognition **
**All Roms Use A Custom R/W Service & Script To Ensure Proper Read/Write Access **
**Device Files Based Off Firmware Update 5-8-2022(Except lk cause I'm lazy and didn't want to repatch it)**
-CricketRom Flash Procedure-
1- Move CricketRom To Device (External SD)
2- Boot Recovery
3- Wipe Cache, Dalvik Cache, Data (Factory Reset)
4- Install CricketRom
5- Enjoy!!
-Custom GSI Rom Flash Procedure-
1- Move GSI Rom zip To Device (External SD)
2- Boot Recovery
3- Wipe Dalvik, Cache, Data (Factory Reset)
4- Install Custom GSI Rom zip
5- Boot Custom GSI Rom & Wait Until A-Team Notification & Reboot
6- Enjoy!!
Contributors
@PizzaG
@lopestom for his nicely done fstab for recovery that I'm using
@Welkwo for the line to kill encryption
@phhusson for his GSI work
AndyYan for his GSI work
@topjohnwu for Magisk
Google for Android
Big Thanks To The Folks Who Have Come To The A-Team Telegram Group To Help Test
Device Downloads
Located Below
Recovery Device Trees
Recovery Device Tree Source
A-Team Website
A-Team Supported Devices
TeleGram Live Support
A-Team Digital Solutions​

-Updates-
6-21-22: Uploading...

Reserved-2...

hmm, not sure why some releases are a bad thing.....

PizzaG said:
hmm, not sure why some releases are a bad thing.....
Click to expand...
Click to collapse
Not sure how or why, either.
I haven't gotten the Dream, yet, so to be clear: the phone is rootable, bootloader unlockable, and has custom ROMs? And still works on Cricket?
If so, that's amazing for an entry-level "free" phone from an MVNO!

rczrider said:
Not sure how or why, either.
I haven't gotten the Dream, yet, so to be clear: the phone is rootable, bootloader unlockable, and has custom ROMs? And still works on Cricket?
If so, that's amazing for an entry-level "free" phone from an MVNO!
Click to expand...
Click to collapse
Yes to everything you said above. I'm running an android 12 gsi rom as my daily.

So sorry, I forgot about locking the bootloader that'll cause the "no os" message when I was trying to reset it to stock to sell.
What can I do to get it to boot into the OS again? The bootloader is locked, so I couldn't do most of what people said since it required flashing. I did download this tool and fired it up in Linux. Fastboot detects the phone, but setting up the mtk client resets in "missing setup.py" and using the "unbrick menu" doesn't do anything. I am using the 0.02 files.
TIA

hawk1500 said:
So sorry, I forgot about locking the bootloader that'll cause the "no os" message when I was trying to reset it to stock to sell.
What can I do to get it to boot into the OS again? The bootloader is locked, so I couldn't do most of what people said since it required flashing. I did download this tool and fired it up in Linux. Fastboot detects the phone, but setting up the mtk client resets in "missing setup.py" and using the "unbrick menu" doesn't do anything. I am using the 0.02 files.
TIA
Click to expand...
Click to collapse
check the setup for mtkclient on github

PizzaG said:
check the setup for mtkclient on github
Click to expand...
Click to collapse
Hello, yeah, so I had gotten it to install, and I tried running both the shorter and the longer unbricking procedure, but there was no change and still gives me the no os message on bootup.