Hello. I have an old Nokia Lumia 520. I have not used it for a long time. When i try to start it nothing happens. I tried charging the phone with its original charger for 4 hours and nothing, it doesn't even vibrates.
I tried a soft reset and a hard reset.
When i connect the phone to the computer nothing happens, but my computer makes the sound that i connected something and then makes the sound that i disconnected something but three times.
Someone knows how to solve this?
PS: Sorry for my bad english.
I tried turn it on a working battery from another Nokia Lumia 520 but still nothing.
Now when i connect to the PC instead of hearing the sound that i connected something, i don't hear anything because pc doesn't detects anything.
Related
I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful What should I do now?
If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.
I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.
Good luck
Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful
Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).
Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9
Yes, I know that is bricked. What should I do to unbrick it?
Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.
Hello.
I've got a weird problems with my MM2. The main problem is connections. I am having some issues with USB and charger. First of all, let's start about USB. For about one month ago I wanted to copy something onto my phone, but unfortutaltey the computer couldn't see the phone card (It see the phone, RSD lite found it). My first thoughts were going around drivers, so i unintalled it and installed everything from the very beggining, but it didn't changed anything. The phone was still on "Memory card acess" with USB debugging enabled (With disabled it wasn't seen even by RSD lite). Second idea was the USB cable, so i've changed it to other one, but it dosen't change anything. The same thing goes on every PC. Yea, and thats about USB issue. Now I will tell about charger. So, for about two days, i just simply wanted to charge up my phone. I looked at the phone, the notification said, that it is charging properly. OK, so i left the phone to charge up. I came back after one hour, and the battery status went down to 1% from 10%~. I tried to change charger, but still without effect. My friend gave me battery from his MM2 and the same thing happend. After some tricks, I've made my phone to charge up. I just tried to unplug/plug usb. It charged up, and next day i had the same issue. Now i even can't make it charging, it is so frightening. I tried to charge up with USB cable with "Only charge", but without effect.
Help me please, this two things are driving me mad!
My apologises about all the mistakes, my English is so poor.
Roms and Kernel change dosent affect.
Maybe your USB port is bad...
Try flashing a SBF to reset the phone. Do you know to get to bootloader mode? Turn on while pressing volume up and camera buttons, then plug your M2 to PC. That's the only way RSD Lite should recognize your phone correctly.
Sent from my A953 using xda app-developers app
dangpzanco said:
Try flashing a SBF to reset the phone. Do you know to get to bootloader mode? Turn on while pressing volume up and camera buttons, then plug your M2 to PC. That's the only way RSD Lite should recognize your phone correctly.
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
I flashed SBF 2 times, on 2.2 and 2.2.2 the same problems occurs. RSD recognizes my phone corrently, no matter how it is connected. I said, that I have problems with USB connection, but i meant, that my PC can't see the memory card Other problems were solved, service helped.
Waiting for other replies.
Take sd card to another device and make backup of your data. Format card on ms2 and back your data. in my case it help i dont know why I have problem also milestone see and use sd card but usb sharing to computer didnt work at all, i have no idea why but changing card helped.
Hi everybody
I have a problem with my Galaxy S5 (no custom rom, official)
I normally used my phone, I locked it. But, after about 10 mins I tried to unlock my phone, but nothing happens
I tried to reboot, nothing happens. I tried take out and put the battery - nothing happens. So I searched on Google and tried some keys combinations, but nothing happens. My phone has about 80% battery. I tried to charge it in the charger, but nothing is happening (black screen, no notiffication light). Also I tried to put off my SIM and SD Card, but nothing happens
Do you have some skills in it? Can you help me?
Few days ago, I faced the same problem..
http://forum.xda-developers.com/showthread.php?t=2853472
Then I'd to take it to the Samsumg store.. And they return it back in 2 days and said me it was a software problem..
I wanted to do a recovery reset, but i can't boot my phone anymore, also the Kies doesn't see anything, so. Did you really think that is a software problem? Because my phone won't vibrate at boot. So maybe it can be a hardware prob :/
EDIT: Phone started blinking red light... (nottiffication), I tried to charge it, but nothing...
Mate as mentioned early, same problem I faced..
It'll be better, if you return it to Samsung customer care..
You seem to be saying that the problem occurred unexpectedly. So presumably this isn't subsequent to a flash error, newly installed app or a trauma (dropping the phone, etc).
First ensure that your battery is charged, plug in the phone to a charger as well and try turning it on. If at all possible, borrow a battery from a friend's S5 or go to a store and borrow a battery for 30 seconds to confirm that the battery isn't the issue.
If the problem persists, then remove the cable and battery. Then put the battery back into the phone and press and continue to hold in this order, the volume down key, then menu key, then power key. Hold all three until the screen powers up (about 5 seconds). If this doesn't work.. the most likely problem is a damaged power key - try pressing hard or "wiggling" it to see if that makes a difference.
If you still can't start the phone, then see if a local cellular repair shop has a "jtag jig" that you can borrow. Or you can buy one on Ebay for a few dollars. When this jig is plugged into the USB socket, the phone should automatically restart.
If all of the above fails (which is unlikely), you would seem to have a hardware problem or unknown origin. Which would be very unusual. If your phone is under warranty, make a claim. Otherwise get an estimate to repair it.
.
If I hold all 4 buttons at the same time and connect the phone to PC, PC recognises the phone for a few seconds. Well, maybe not recognises, I cant see it, but it plays the same sound as if connected flash drive to pc. However, everytime it disconnects within a few seconds...
I´m in the same case, but I was flashing the Galaxy S5 with the four files ROM and the pit file using Odin3.09. All the process ended well, but after rebooting there apeared one Screen sayin something like "Some files at this phone are encripted and there can´t be modified......." so I did a manual reboot and take off USB cable and from this moment the phone don´t do anything but giving a sound when I plug USB to computer cable and I can see new COM --> Qualcomm HS-USB QDLoader 9008, and there repeat a loop.
I´m still looking for a solution, but it gives me that there is time to change phone.
Possible Fix
This thread is old but idk if this was ever solved, so in case anyone else ever has an issue like this. My Gf is still rocking this phone so i've had a little experience with it. The phone wont turn on or charge. I got it to work by sticking a flat head screw driver and prying it fairly hard against the bottom of the battery (the side closest to the charge port) and forcing the battery harder against the metal contacts. While pushing the battery I turn on the phone and it starts right up and continues to run even after letting the pressure off. I've noticed this happens every few times i take the battery out, but this method has never failed for me turning the phone back on. Hope someone finds this helpful.
kimo hands said:
This thread is old but idk if this was ever solved, so in case anyone else ever has an issue like this. My Gf is still rocking this phone so i've had a little experience with it. The phone wont turn on or charge. I got it to work by sticking a flat head screw driver and prying it fairly hard against the bottom of the battery (the side closest to the charge port) and forcing the battery harder against the metal contacts. While pushing the battery I turn on the phone and it starts right up and continues to run even after letting the pressure off. I've noticed this happens every few times i take the battery out, but this method has never failed for me turning the phone back on. Hope someone finds this helpful.
Click to expand...
Click to collapse
weird, youd think that bending the tabs out to force contact with the battery better would do the same trick fwif
Hi! I managed to hard brick my galaxy s7 edge and i wanna see if someone here knows if its hard bricked or soft.
Got root and had renovate rom 2.0 ( n7 port) then i wiped my phone and flashed renovate 3.3 (s7 edge stock)
my phone worked fine on startup and i started to restore my old apps through gmail. i thought it would take a while so put my phone in my pocked and let it be fore about 20 minutes then when i took it up it was complete dead. i had about 67% before it died i tried everything (vol up down home all together) for at least 15+ sec. had it charge over the night ( i noticed that the phone didnt get warm or any leds shown) in the morning i tried everything again and nothing. when i connect my phone to my computer i hear the connect sound and then it disconnect a sec later. if i hold power button down and connect it ( and dont release power) my computer recognize it as onyx8890 and if i release powerbutton it disconnects. cant boot it in any way whatsoever. so what do you think? its only a week old thats the worst part of it!
I have left it to the store I bought it from for warrantable but its still rooted and have a rom on it. well if its complete dead they cant see if its rooted so thats one good thing.
still want to hear you opinion
sorry for bad english
so, from what I understand, u cant boot into any mode, are u even able to see something on screen? (logo, boot screen, etc.) U can try JIG (it somehow make any samsung device go to download mode). otherwise idk.
Hi guys, I have the same problem with my S7 Edge.
Can anyone help?
OK. So I managed to recover my phone.
The phone was dead because of a software crash(nothing on display, no LED light, power+vol. down for reset not working) and when connected to my PC - nothing (just a connect and after 1 sec. a disconnect sound).
But if I kept the power button pressed without letting go, my PC would detect the phone as exynos8890.
I tried to keep pressing the power+vol. down while connected to PC and I realized that the combo worked because after ~7 seconds the phone would disconnect and reconnect itself (but still as exynos8890).
But I tried a different approach. While connected to the PC I tried to keep on pressing power+vol. down. And I could hear that it disconnected and reconnected. But I did not let go of the buttons. And again a connect and disconnect. And again. And after literally 5 minutes of the buttons kept pressed down without letting go and countless reconnects there was finally a change. The disconnect sound was not heard after the connect sound. At that point I stopeed pressing the buttons and when I looked at the phone I could see that the battery icon appeared. Since the phone was connected to my PC, after 1 min. the battery started charging (it was charged 31%). And after that my phone booted fine.
wow
Hi I have just bought an s7 which turned out to be a Korean G930L but I cant get any response out if it apart from the 2 bottom leds and and the blue one. No response from trying to get into recovery or download mode, basically a black screen though it does vibrate on what i think is start up. It is found by pc and Odin and charges ok, I can tell as I can see properties on pc. But no other response. Is it possible that the previous owner tried to root it using non korean rom or TWRP? Any advice on how to fix either getting TWRP on or screen to light up. I am sorry for being so vague I have pulled it apart and checked all of the connections, screen, motherboard etc but nothing. Or chuck it out or put back on eBay. I tried your idea but it only booted once in that 5 minute period so I tried without it plugged in and rebooted several times but still no screen response.
Hello,
I received the YotaPhone 2 (YD206) today.
The box was sealed.
When I tried to turn on the phone, it didn't start. I thought it was empty so I put in on charger for 2 hrs.
After that I tried again , but still nothing happened -- i was holding power button multiple times, as long as 5 minutes at the time, but there was simply no response -- no vibration, no sound, screen remains black (not turned on), anything at all.
I tried different chargers as well (Xiaomi and Samsung one) -- they weren't working with this phone either.
When I connect phone to a PC, I just hear sound that something is connected (I saw installing drivers notice first time I connected it), but nothing happens at all. I don't see the phone in my computer or anywhere else.
Is there way I can fix this somehow? What else can I try?
Thanks!
You can try unlocking the bands like described here.
Not sure it will help but you can at least try.
http://4pda.ru/forum/index.php?s=&showtopic=550302&view=findpost&p=55303436
fly20 said:
Hello,
I received the YotaPhone 2 (YD206) from coolicool.com today.
The box was sealed.
When I tried to turn on the phone, it didn't start. I thought it was empty so I put in on charger for 2 hrs.
After that I tried again , but still nothing happened -- i was holding power button multiple times, as long as 5 minutes at the time, but there was simply no response -- no vibration, no sound, screen remains black (not turned on), anything at all.
I tried different chargers as well (Xiaomi and Samsung one) -- they weren't working with this phone either.
When I connect phone to a PC, I just hear sound that something is connected (I saw installing drivers notice first time I connected it), but nothing happens at all. I don't see the phone in my computer or anywhere else.
Is there way I can fix this somehow? What else can I try?
Thanks!
Click to expand...
Click to collapse
Sounds like the phone is defect. The only thing I can think of is that it somehow freezed up and you will need to let the battery drain so all power is off the phone and then try to recharge it. Draining the phone completly without screen use can take up to 7 days.
I finally managed to turn it on,by keeping it on charger for whole day and night and after a couple of attempts it was on.
I thought battery voltage was pretty low which prevented it from turning on.
I used a phone for a day, completely discharged it and then recharged it to 100% again. I thought everything is gonna be good now.
Then I wanted to upgrade to Lollipop, I decided to use YotaFlasher to flash EU KitKat first, and that worked fine. After that, I used OTA update to download Lolipop.
Download finished, and I was offered to "restart device and apply update", but as soon as I confirmed, the device went off and I can't turn it on anymore. What the heck is happening with this yotaphone? (battery was at 97%)
I can't turn it on, restart, put in download or recovery mode, get it to charge or get the screen on. Also PC don't recognize it *AT ALL* -- not even sound that something is connected. It looks completely dead (again).
Any ideas what I can do to fix my new problem?