Database Users

[Q] reflashed phone rom - watch not found able

hi guys
i just reflashed my phone rom
and now my watch isnt able to connect via the app :/
need to hardreset my watch and now its working
any solutions `?
thanks

When connecting any of my Android Wear devices with a new Android device I had to do a full reset on the watch. Nothing you could do about that, let's hope it gets fixed soon.

How can i fix bricked lemfo gw01?

Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation?

try hard reset at first. (press power button 10 - 15 sec) If it does not help, try to install Mediatek smartdevice app from Playstore. There are some watchfaces too. Install it. Or - try to flash firmware (ask Lemfo for it)

Hello buddy i need to know if you solved that and how because i have the same problem. thanks

Nathanaeltc said:
Hello buddy i need to know if you solved that and how because i have the same problem. thanks
Click to expand...
Click to collapse
Hello.
I destroyed my GW01 in first day, and I found the solution the same day.
You have to use "Flash tool" program. And usb driver also is needed.
Press "format" in program during connection via USB, and press and hold clock bottom.
After fiev seconds You have a new clock.

my Gw01 smartwatch's touch suddenly not working and i cant reset it via hard reset and it can't be connect with pc coz i m not able to switch to mass storage in smartwatch. pls provide any flash tool program for pc so i can connect and flash my smartwatch.

K88h smartwatch bricked need help

Hi Guys
Today my k88h watch arrived and one of the first things I did was put some new faces onto it....one of them didn't work so I selected one that did work and tried to delete the broken one with mediatek app, the app froze and kicked me off while the watch was in the process of deleting the broken watchface.
So now my watch only turns on and goes black screen and when I try the reset trick it hangs on the usbmedia screen, is there a way to reflash the firmware? I cannot find the firmware or flashing tools someone show me what I'm doing wrong please.

P8 Lite - Problems with bluetooth connectivity

Hi.
I've a Huawei P8 lite, EMUI 4.0.3, Firmware ALE-L21C432B633 and Android 6.0.
It's rooted via Magisk.
From a few weeks, my phone is totally unable to connect via bluetooth with my car, my smartwatch, and other devices.
When i try to connect, y phone try a connection but everytime appears "impossible to connect to"device name". Thd reason could be..." and the message goes one, talking, for exalmple. about distance (10m).
Someone has a solution?
Thank you.

Android Allwinner T3P1 easyconn need help

Hi,
I am not sure what setting i have done or after updated system firmware. The easycon no longer working. Everytime i press the app icon, it went in and immediately kick out to the main icon screen.
Another issue is after updated the system firmware, the side touch panel lighting cannot be change colour. Floating button also gone missing.
Appreciate someone can help out.

I have t3_p1 1-16 Android 10 units. I reset it to factory settings. Screen mirror no longer works at all. Even the USB Car Play Dongle is not working. Is there a hero to offer a solution?

hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.​after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,

Badr_ps said:
our head unit should be connected to WiFi for the MCU up
Click to expand...
Click to collapse
Badr_ps said:
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.​after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Click to expand...
Click to collapse
Thank you very much for the detailed explanation. I will try. I will share the result here.

famepa said:
Thank you very much for the detailed explanation. I will try. I will share the result here.
Click to expand...
Click to collapse
Hello again. I tried every option but it didn't work. Unable to connect via wifi mirror or cable. I think there is a hardware problem.

No encienden las luces de los botones laterales. No conecta el bluetooh.

Hi
I have a problem with quad core t3p1 android 9. It is stuck on the logo logo. Can anyone help me how to enter its recovery mode? Thanks

I also need help with how to enter recovery mode, anyone kindly assist.