Database Users

Bluetooth pairing

Hi,
I've recently found my Qstarz BT-880 bluetooth GPS receiver and would like to use it with my Vario 2. I have managed to achieve this in the past but for some reason cant get the phone to stay paired with the device.
If I setup a partnership, the GPS receiver connects as soon as I hit ok and then about 10 seconds later it disconnects; I cant then get it to connect again short of deleting the partnership and starting again.
I also cant remember how you just search for bluetooth devices which you can connect to (other than creating a partnership), is this possible?
Anyone seen behaviour like this before/have any tips they can offer as I'm at a loss?
Thanks.

bluetooth car kit

hi.. i hve a skoda, octavia 2, it has factory installed bluetooth car kit, i can easily connect my Herms , but it keeps disconnecting and reconnecting every few minutes, I tried to upgared to WM6 and its same, I cange my bluetooth control unit at Skoda , and its same. the car kit works fine on any other phones like Nokia or SE. the problem is only with HTC devices. any idea ?

not a single reply !!!

This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.

thanks forza
thanks a lot, at least I don't feel lonley with my problem.

i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.

m15chief said:
i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.
Click to expand...
Click to collapse
can you please advise how to setup the jetware ??

forza said:
This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.
Click to expand...
Click to collapse
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?

timbouk said:
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?
Click to expand...
Click to collapse
Firmware is the latest version for my device, but will try unlocking as you suggest and see how that goes, thanks for the tip.

parrot ck3100 and spv m3100 with wm6 dutty v2... it works perfect... i had black 3.0.1... it all went well untill a call in or out was made... but with dutty v2 it is al perfect... i am amezed myself when i see all the problems others have...

[Q] Anybody experienced the bluetooth issue w/ Pdaimatejam's ROM

Anybody experienced the Bluetooth issue w/ Pdaimatejam's ROM? My Bluetooth could be switched on and stable. But it always shows "Searching..." and cannot find any Bluetooth device. I cannot find HD2 from other Bluetooth device either.
Please advise!

mine works sweetly
ermm... a) make sure the other phones bluetooth is set to be Discoverable
and b) so a soft reset )

Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.

larryexchange said:
Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.
Click to expand...
Click to collapse
Finally I have to roll back to HD2O's 1.22. That ROM's bluetooth module works perfect.

in my case, I only get paired when I also put wifi on after that I cult put it off again
but It can not connect Automaticly you have to put it off wait 30s
put it on and after 30s they a connected and stays stable with out wifi
thats in V2 with original soft radio

Bluetooth blues

Hello all.
I am having some bluetooth connectivity problem with my moto g 4 US xt1625 Retus channel (non amazon version) stock everything.
Basically the connection to my smartwatch is unstable and keeps dropping on and off.
Normally I would be blaming the smartwatch for this BUT it connects absolutely perfectly to my moto G2 (cyanogenmod 14) without any hint of misbehavior
I've already tried;
Forgetting and re-pairing device (also rebooting phone before repairing)
Factory resetting watch
clearing app data and cache of system bluetooth apps ("bluetooth share" and "bluetooth MIDI")
Disabling 4G (sometimes interferes apparently)
Disabling wifi
Running phone in safe mode.
*edit - also tried disabling power optimisation for both system bluetooth apps AND the watch companion app
I also reconnected my smartwatch to my old moto G 2 after trying all these things and it still works perfectly.
Old moto G2 had blutooth 4.0 LE and this moto G4 has bluetooth 4.2 LE which would offer no comparability issues.
Has anyone had any similar problems with their bluetooth?
Thanks in advance

I think my next move will be to root, and start removing G apps that could be interfering with the bluetooth connection

hotdog18882 said:
I think my next move will be to root, and start removing G apps that could be interfering with the bluetooth connection
Click to expand...
Click to collapse
I have had a problem with my Fitbit connecting that didn't happen on my G2 or G3. I keep my cordless home phone connected with no problem though. What I have to do is forget the Fitbit in my bluetooth devices and it connects fine. If it's even showing up in the bluetooth devices it won't connect. That seems strange that it will only connect that way but others have reported the same thing. Maybe try and see if it connects after you forget it in the bluetooth settings and it's not even showing up.
Sent using XDA-Developers Mobile App

Tel864 said:
I have had a problem with my Fitbit connecting that didn't happen on my G2 or G3. I keep my cordless home phone connected with no problem though. What I have to do is forget the Fitbit in my bluetooth devices and it connects fine. If it's even showing up in the bluetooth devices it won't connect. That seems strange that it will only connect that way but others have reported the same thing. Maybe try and see if it connects after you forget it in the bluetooth settings and it's not even showing up.
Sent using XDA-Developers Mobile App
Click to expand...
Click to collapse
OK maybe you're on to something.
If I connect to the watch using the companion app, then enter bluetooth settings and "forget" the device..... It still appears to be connected
But a few seconds later, it automatically pairs and re-appears in the "paired devices" list.
Is there a way to prevent re-connect?

Actually, after "forgetting" it several times, It's staying connected and has done for a 15 minutes now.
I'll report back if and when it disconnects.
Cheers

Ok so the watch disconnected a couple of times in a few hours. (this is a huge improvement from before)
Each time, "forgetting" the watch in bluetooth settings caused an automatic re-pair and return to good connection.
Maybe I can use "tasker" or similar app to automate this unpair upon disconnect?
Cheers

hotdog18882 said:
Ok so the watch disconnected a couple of times in a few hours. (this is a huge improvement from before)
Each time, "forgetting" the watch in bluetooth settings caused an automatic re-pair and return to good connection.
Maybe I can use "tasker" or similar app to automate this unpair upon disconnect?
Cheers
Click to expand...
Click to collapse
Yeah, it's strange that it works that way. I think it's the device not compatible with that version Bluetooth. My Fitbit doesn't try to reconnect once I forget it unless I make it pair then it will actually work sometimes and sometimes it doesn't when paired. It always works if I don't pair it at all. Have you tried clicking on the gear besides your watch in more settings once it connects and unchecking what ever connectons it shows in the check boxes?

Tel864 said:
Yeah, it's strange that it works that way. I think it's the device not compatible with that version Bluetooth. My Fitbit doesn't try to reconnect once I forget it unless I make it pair then it will actually work sometimes and sometimes it doesn't when paired. It always works if I don't pair it at all. Have you tried clicking on the gear besides your watch in more settings once it connects and unchecking what ever connectons it shows in the check boxes?
Click to expand...
Click to collapse
If i click the gear next to the watch in the bluetooth settings, the only options i have are to rename the device, or to forget it
I have no checkboxes or anything like thar.
Do you have advanced bluetooth settings installed or something???

hotdog18882 said:
If i click the gear next to the watch in the bluetooth settings, the only options i have are to rename the device, or to forget it
I have no checkboxes or anything like thar.
Do you have advanced bluetooth settings installed or something???
Click to expand...
Click to collapse
Some of my devices have check boxes for contacts, audio, etc. but not all. I thought maybe that would be something to look at.
Sent using XDA-Developers Mobile App

Ok, its still messing around. I'm going to install the Temasek unofficial cyanogenmod 13 and see if that is an immediate fix, or if the additional options offers a fix.
Cheers

update;
after ugrading moto g4 to android nougat (7.0.1) I no longer have any issues with bluetooth connectivity.
6.0.1 was to blame!

my phone is updated to stock Nougat also and still having bluetooth issues staying connected to my car (2012 ford fusion with mysync) I will be keeping an eye on this thread.

vrm4 said:
my phone is updated to stock Nougat also and still having bluetooth issues staying connected to my car (2012 ford fusion with mysync) I will be keeping an eye on this thread.
Click to expand...
Click to collapse
I seldom connect my phone to mysync but my wife does. She also keeps her G4 connected to the Panasonic home phone system while home. I've noticed that since the update to Nougat mysync is very slow to connect on her phone. The Panasonic cordless phone seems to connect fine. Mysync will usually connect although she has to drive for 10 or 15 minutes before it does occasionally and other times it connects instantly. One time I had to delete her phone in the car and add it back. I wondered if it was a problem of it not disconnecting from the Panasonic, but that shouldn't be past the end of the driveway. Then again it may be just a rip in the space time continum. ?
Sent from my SM-T530NU using Tapatalk

Bluetooth issues

I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.

Hi,
Did you get a solution ? I face the same problem and can't find any solution...

Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?

Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940

ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....

I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?

Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk

yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that

suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.

Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.

I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10

i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11

Yes, it is strange. After some restarts and on/offs connection suddenly appears