Database Users

Bricked D801 - TOT & KDZ recoveries both failing?

I've got a T-Mobile D801 and tried flashing to the stock lollipop rom D80130b_00 using TWRP and the instructions on this page, but the flash must have failed. I did a full factory reset back to stock 4.4.3 prior to attempting this flash and I'm not sure what (if anything) I did wrong for the flash to fail. I can boot in factory reset mode and select clear everything, but then I just see the android guy with gears turning for 2 seconds and the phone reboots again.
Now I'm in a bootloop where I get an "error: Boot certification verify" above the T-Mobile startup logo followed by a "Demigod Crash Handler: Critical Error!" screen that provides options for rebooting (volume down) or putting the phone into download mode (volume up). After using the volume up the screen displays "Volume Up is pressed: Jump to Dload mode" and after connecting via USB appears in device manager as "LGE AndroidNet USB Serial Port (COM41)". I can't (1) boot directly into download mode or (2) get back into TWRP.
I've tried both the KDZ and TOT methods listed in this thread and neither are working. The LG Flash Tool 2014 / KDZ option starts the LG Mobile Support Tool, but it fails every time once "S/W Upgrade is in progress" reaches 4% with a generic "Upgrade stopped due to an error" message.
The TOT method fails every time with a "Model Information Check FAIL!" message. The full text is - "PID: NULL, IMEI: NULL, Model: , DLL:801, BIN: BIN_LGD801AT-01-V10c-310-260-AUG-13-2013+0.tot , SWV: , SWOV: , Model Information Check FAIL! , 00000000"
I've also tried using srktool to repair fastboot, but it gets stuck at "waiting for device".
What do I try next?

Finally got back into 4.2.2 using tot method. LG Mobile Support Tool doesn't think updates are available though??

same situation lg g2 d802
losonn said:
Finally got back into 4.2.2 using tot method. LG Mobile Support Tool doesn't think updates are available though??
Click to expand...
Click to collapse
i am in same situation with lg g2 d802 model ..have you fixed your g2?

hunzz said:
i am in same situation with lg g2 d802 model ..have you fixed your g2?
Click to expand...
Click to collapse
Yes, I *think* what happened was that my 30b bootstack was flashed successfully via twrp, but then the actual kdz flash of D80130b_00 failed. I had a lot of trouble at this point - needed to fix qhsusb_bulk problems first, then use the more aggressive TOT flash method to reset to stock 4.2.2.
Finally the LG Mobile Tool was still reading it as having D80130b_00 / lollipop after going back to 4.2.2 via TOT (?). Last step was to do a full restore from the LG Mobile Support Tool (options -> upgrade recovery) and it actually downloaded / flashed D80130b_00 so everything is working well now :good:
If it helps anyone I used the LG backup tool to restore apps / media and have to say that for a stock solution it's pretty solid.

qhsusb_bulk?
losonn said:
Yes, I *think* what happened was that my 30b bootstack was flashed successfully via twrp, but then the actual kdz flash of D80130b_00 failed. I had a lot of trouble at this point - needed to fix qhsusb_bulk problems first, then use the more aggressive TOT flash method to reset to stock 4.2.2.
Finally the LG Mobile Tool was still reading it as having D80130b_00 / lollipop after going back to 4.2.2 via TOT (?). Last step was to do a full restore from the LG Mobile Support Tool (options -> upgrade recovery) and it actually downloaded / flashed D80130b_00 so everything is working well now :good:
If it helps anyone I used the LG backup tool to restore apps / media and have to say that for a stock solution it's pretty solid.
Click to expand...
Click to collapse
you said your g2 was detected as a lge androidnet in device manager but not as a qhsusb_bulk...then what problems have you fixed about qhususb_bulk? and what is the more aggressive tot method different from this threadhttp://forum.xda-developers.com/showthread.php?t=2432476

Were you able to find a solution? I'm in the same situation. Please help!

Bricked LG G2, download mode goes on, but not working

Hello
I'm new here, I've been modding my lg a few times, always when bricked, kdz or tot files were saving me.
But now I've got real problem.
I was changing ROM from Cyanogen 13 to Cloudy 3.3. I thought I just need to flash rom via recovery (2.8.7.3 bump blastagator). Flashed fine, without any troubles, but when it came to reboot, phone just got stuck on LGs logo.
I knew i f*ed up.
Recovery isn't working, but Download Mode is turning on normally, at least it seems to.
So i tried to flash KDZ, but LG Flash Tool immedently shuts down giving "lg user...." error (don't remember what exacly it was saying).
Then i tried via tot files. But after installing drivers from tutorials, device isn't showed as "LGE AndroidNet USB Serial Port", but as few positions like MTP device or usb serial port(but not in Com ports) and all are marked as devices without drivers. Flash tool for tot also didn't worked here, because it did't found device.
What can i do now? Please help me.
[Edit]
So now, using different drivers somehow Jelly Bean installed by tot method (device didn't appeared as tutorial said, but it worked) phone is booting normally, but i can't again install lollipop with kdz files.
I was trying 3 different drivers, every giving instant error of flash tool.
What can I do now?
[EDIT2] LGUSERCSTool.exe is crashing. How can I install lollipop now?
Are there tot files for lollipop?

Need help with returning H870 back to stock

Hi, so I have this LG G6 H870 which is rooted, has TWRP installed but with stock ROM. As I have upgraded to an Xiaomi Mi 8, I wanted to make it as it came out of the factory. I got the .kdz file, LGUP with Uppercut and at first I got an Error: 0x2000 and the progress was always stuck on 4%. Then I tried using LG Bridge to update the software, didn't do it but it did update LG USB drivers (I had it installed, but I guess it was an older version). I tried using LGUP again but now I get „Error: 0x81000302, Please use latest DLL LAF Protocol version is not match DLL = 1154019668 Device = 118497312“. Any suggestions?

Solved it by using LG Bridge and clicking on Update Error Recovery.

H910 LG Logo loop | tried many KDZs | factory reset not helping

Hi,
my H910 is not starting Android anymore.
I flashed many KDZ Files (different versions) with LGUP:
First in the mode "partition DL" (selected all partitions), after that I tried it often with "Upgrade" option.
Everything seems to be succesful, but LG V20 is in boot loop at the LG logo.
Sometimes I can see after LG Logo a circle with "erasing" for some miliseconds.
Tried recovery factory reset, circle spins some seconds then reboot and same loop.
Download Mode always works.
Factory reset dialog (recovery) works, but erase progress seems not to work.
I don't know what I should try now anymore.
EDIT:
Downloaded newest LG Universal Mobile Drivers from LG Site and now everything works

For the sake of leaving a record what helped you out of your problem, could you clarify?
You downloaded the latest LG Universal Mobile Drivers from LG site and installed them to your PC, replacing the drivers that seemed to work (the device was visible, LGUP did not complain).
Then you used the LGUP again to load something and that fixed the bootloop. What was that thing you loaded after updating the drivers?

Descent2 said:
For the sake of leaving a record what helped you out of your problem, could you clarify?
You downloaded the latest LG Universal Mobile Drivers from LG site and installed them to your PC, replacing the drivers that seemed to work (the device was visible, LGUP did not complain).
Then you used the LGUP again to load something and that fixed the bootloop. What was that thing you loaded after updating the drivers?
Click to expand...
Click to collapse
Hi,
yes new drivers from LG site was my solution.
It was correct visible on LGUP before too.
Now I flashed same as before firmware 10f, than dirtysanta root and than recovery. As written in that "How to root" threads.
Seems like old LG drivers hat maybe some problems with Win 10 so that not everything was written correctly.

LG G6 - TWRP loop

Hello! Sorry for my bad language, but English is not my native language.
I have a LG G6 H870 EU. A year ago I unlocked the bootloader, installed TWRP and a custom rom.
Everything worked, but I bought a newer phone. Now I need LG G6 with original firmware (and stock camera app). I found the stock software on XDA for TWRP. I installed them. The phone booted up properly, Android requested data formatting. When I agreed, my phone got stuck in the TWRP loop.
Now I install various software, custom and stock - only TWRP starts every time. I tried LG UP but at 9% it shows "USB Connection established" error. I've tried various DLLs, but on others the program doesn't start at all. Maybe I have the wrong DLL? I've tried UPPERCUT too.
Please help, thank you.

Hi. I have a similar problem on my LG G6. After selecting reboot from TWRP, the message "No OS Installed!" shows. After reboot I get into TWRP again.

Using LGUP CMD (command line) I was finally able to flash the phone and get it working.
See:
How to use LGUP (Command Line) to flash LG phones
This guide will explain how to use LGUP (Command Line version) to flash firmware (in .kdz or .tot format) to an LG Android device. RequirementsDownload and install LG drivers Download the firmware for
www.hovatek.com
LGUP CMD / Dev / Lab / Store Tool Versions
Below is a collection of different versions of LGUP CMD / Dev / Lab / Store tools. They are Windows tools for flashing .kdz & .tot files / firmware to an LG Android device Download LGUP CMD / Dev / La
www.hovatek.com
LGUP_common dll versions
Below is a collection of different versions of LGUP_common.dll. They are files necessary for getting LGUP to properly detect an LG phone in download mode. Download LGUP common dll LGUP common dllLGUP_
www.hovatek.com
It might work for you. It is worth a try. Good luck.

worldoflimak said:
Hello! Sorry for my bad language, but English is not my native language.
I have a LG G6 H870 EU. A year ago I unlocked the bootloader, installed TWRP and a custom rom.
Everything worked, but I bought a newer phone. Now I need LG G6 with original firmware (and stock camera app). I found the stock software on XDA for TWRP. I installed them. The phone booted up properly, Android requested data formatting. When I agreed, my phone got stuck in the TWRP loop.
Now I install various software, custom and stock - only TWRP starts every time. I tried LG UP but at 9% it shows "USB Connection established" error. I've tried various DLLs, but on others the program doesn't start at all. Maybe I have the wrong DLL? I've tried UPPERCUT too.
Please help, thank you.
Click to expand...
Click to collapse
Sorry for the post hijack, just curious. How did you manage to unlock your bootloader a year ago. I thought LG stopped providing the unlock.bin's like, 5 years ago?