Hi
I bought a microwear h1 smartwatch few days ago through aliexpress, but it only worked for a few times, after that the touch became totally unresponsive but the power button brings it to the power menu where it gives the option to either boot or restart the watch, but the touch is just not working. The watch didnt fall nor any other damage was done by any means. Aliexpress denied the refund saying this is not a touchscreen watch, but they are morons. Plzzzzz help.
abhi2390 said:
Aliexpress denied the refund saying this is not a touchscreen watch, but they are morons. Plzzzzz help.
Click to expand...
Click to collapse
Send her a video link from youtube with the touchscreen working on this watch
already tried that, they say its not the same watch. now i m looking for a solution to fix the watch on my own.
Related
Hello there i have a zuk z1 device, a few weeks ago he fell and the touch stopped responding, i bought a replacement screen with digitizer from sunsky and gave it to the lab and from here it got frustrating, at first the device could not boot and after a day they told me that the device did boot with the replacement screen but it doesn't have touch like before.
what can i do?
Matan.M said:
Hello there i have a zuk z1 device, a few weeks ago he fell and the touch stopped responding, i bought a replacement screen with digitizer from sunsky and gave it to the lab and from here it got frustrating, at first the device could not boot and after a day they told me that the device did boot with the replacement screen but it doesn't have touch like before.
what can i do?
Click to expand...
Click to collapse
The service center messed up your device/replacement screen or the replacement screen was doa. What you should do? Ask service center and the shop where you bought the replacement screen to get a new one.
Hello people out there I recently purchased 2 iwo 2gen mtk2505c smartwatch on dhgate and I had a huge problem. Starting on the first issue I changed the watch face on the first watch using the mediatek smart devices app and added more watch faces in the watch but when I changed the watch faces the watch got
bricked ? I changed the firmware of the watch and. It worked for some hours until the watch is working fine but the touch is not responding at all ,the same issue has happened. On the other watch my touch is not working at all even I I download new firware and install it on any of the watches the touch dis not work at all if it works it will work for a few minutes then it just stops but the watches are still new got the a couple of days ago ? I need help please it would be much appreciated
So I bought -what I believe- is this Android Head Unit over a month back (Apparently I can't post links yet, but if you search Amazon for "Car Stereo Touch Screen Bluetooth GPS DVD Double Din In Dash Sat Navigation Vehicle Head Unit for VW Volkswagen Jetta Golf Passat Tiguan T5 VW Skoda Seat Hands Free Call Free Map Backup Camera" the result is the item that I got. ) It worked fine once I got it installed, then about a week ago it started having issues (Screen would freeze, buttons unresponsive, and would stay like this until car had been off for some time. Still switched to backup camera on reverse.) I tried to go into settings and do a factory reset to see if that would fix the issue, but now it's stuck with a black screen and the word "Erasing". It still seems to be doing something because overnight the next time I come out the screen is on and it says, "Recovery 7.1.1 :failed to mount /cache (invalid argument)" I've tried several different button pressing methods to try and get to the recovery screen, but it just keeps coming back to the "Erasing" screen regardless of whether I use the Reset button or the Power button (held). I have a couple pictures of settings from the "Droid Info" app (because I couldn't find anything helpful in the settings themselves) that I took before I started having problems with it. So I'm looking for some help regarding getting it into recovery and/or finding out what I'm doing wrong.
Brand is confusing, roundabout on Amazon I found "Malanzs", but it looks exactly like and has the same Manufacturer # as the TMOTEC brand (DS02P051S01C0) and a lot of the pictures of the Malanzs one look like they photoshopped them from the TMOTEC pictures.
One of the things I was trying to find on my pictures but I don't have is the MCU version (apparently this is important for where I will get the most help with my post)
Any help is appreciated, thanks for your time.
I can't help get it working (it sounds defective), personally I'd return it to Amazon quick !
MrGubby said:
I can't help get it working (it sounds defective), personally I'd return it to Amazon quick !
Click to expand...
Click to collapse
Thanks for the response, I'm in communication with the seller to try and get it returned, but as it's been longer than a month, it's outside of Amazon's return period. I was just hoping to possibly find a solution here.
im not sure the region in which u live ...
but sounds like it possibly overheated ...
and something fried,
ive a px3 rockchip 7.1 hizpo (for ford fusion/f150/exploders)
had it bout idk 8 months, put in some nice sundown 12's in my trunk w/a 40k orion amp and between that and summer in full swing early, im drawling alot of heat, and the same things happenin to mine...
seems over 96 degrees the unit just shats on it self...
the heads still on but android system(ui) crashes...
imma try these few idears while i wait for my px5 upgrade to get here from ebay...
other then this fabricating trick,
im outta suggestions... ive tried everything to get it too
function correctly, even sit in a ice box ova ac just to keep it cool...
anyways ...
these were for px5 but hw as i understand is same under the hood...
:good:
https://youtu.be/k4HYcKsszsg
https://youtu.be/C-s2FN3VeAc
Hi!
I’m still new here and I’m not very experienced. I recently bought a Hi! I’m still new here and I’m not very experienced. I recently bought a Junsun v1 2 / 32Gb headunit. Everything was fine during installation. All cables are in place. (Checked.)
Everything works perfectly except the air conditioning application. The air conditioner buttons on the "plug-in frame" control the air condition, but the app doesn't work. The steering wheel buttons and reversing camera work well except for the air conditioning application. When I start the app it just doesn’t respond to the buttons. The button flashes but does nothing.
I uploaded a video to youtube about the problem. The title of the youtube video is Junsun V1 problem Honda Accord 2007.
I wired everything according to the installation manual.
What could be the problem? Maybe the head unit is bad? Is the device not communicating via CANBUS?
I have already received two types of firmware upgrades from the vendor, but neither helped? Maybe a newer firmware version? What should i check?
Thanks for the help!
Hello I bought junsun 2G +32G Android 10 but after 2 months using device with full function the buttons suddenly stopped working and also I couldnt see any button function on the screen and also even if I couldnt see any funtion on the screen the air condition was also not working and I tried to enter 8888 and 201 also 8888 75 dual conditioner or 8878 75 but nothing changed and the buttons are not working and also my cars air condition is stopped working but when I plug in the original tape recorder the air condition is working I will be glad if you can inform me how do I make the buttons and air condition work again ...I am consent to air condition works even if it is not shown on the screen...And if you have a firmware or something I will be glad to have it...thanks in advance
I usually spend my summers with my grandparents , because I miss them a lot during the year. It is very hot lately and I can't live without an aircon and they have junsun 2G +32G Android 10. But something was wrong about it, because it had some problems. I couldn't see any function on the screen and the aircon pipe leaking and we tried our best to solve it, but did worse, being completely disappointed. After doing several researches on the internet I found a good website , that really saved us,and made my grandparents happy again. Thanks to the professional employees we solved all the problems and we were satisfied of their services.
I have bought a dead pixel LCD from aliexpress. and I install it very well without any hassle. everything is working well but the fingerprint scanner is not working it shows a message "fingerprint operation canceled" now what should I do?
for your kind information, I have reset my phone several times and updated the latest version.
I added a picture and a video.
Help me please if anyone of you faces this problem.
Thank you
Return it to aliexpress and buy one that you know works?
ldeveraux said:
Return it to aliexpress and buy one that you know works?
Click to expand...
Click to collapse
i have tried to return but the seller didn't respond to my messages.
May be that fingerprint needs official Samsung Amoled display.. but try this before: if you have warranty go to samsung repair store, tell to them the fingerprint's problem and they (with a software) will fix the problem.. It happened to me when 2 years ago they changed the PCB to my A50, after that fingerprint didn't work anymore they fixed this like that.
InfamousMykol said:
May be that fingerprint needs official Samsung Amoled display.. but try this before: if you have warranty go to samsung repair store, tell to them the fingerprint's problem and they (with a software) will fix the problem.. It happened to me when 2 years ago they changed the PCB to my A50, after that fingerprint didn't work anymore they fixed this like that.
Click to expand...
Click to collapse
thanks brother.
ariful420bd said:
thanks brother.
Click to expand...
Click to collapse
NP. I think that, if you changed display not in an Samsung official repair store, they won't consider your request, but I hope that they will help you.
You can get replacement screens that have a fingerprint scanner in them and some that don't. It's a fused in part, so if the screen was made without it (usually cheaper) the phone won't have that feature anymore. You will need to replace the screen to get the function back.