Hi,
I bricked my head unit with power failure.
With my current ROM, I'm getting "s_ft_enable_dram_fail (4032)(SP FLASH TOOL)" error.
I'm using this ROM needrom.com/download/swm-8802.
Appreciate if anyone can give me the ALPS.LD-KK1.MP10.V2.3 ROM.
needrom.com/wp-content/uploads/2018/08/949485-500x375.jpg
needrom.com/wp-content/uploads/2018/08/228475-500x375.jpg
asiridissa said:
Hi,
I bricked my head unit with power failure.
With my current ROM, I'm getting "s_ft_enable_dram_fail (4032)(SP FLASH TOOL)" error.
I'm using this ROM needrom.com/download/swm-8802.
Appreciate if anyone can give me the ALPS.LD-KK1.MP10.V2.3 ROM.
needrom.com/wp-content/uploads/2018/08/949485-500x375.jpg
needrom.com/wp-content/uploads/2018/08/228475-500x375.jpg
Click to expand...
Click to collapse
Sorry I can't tell you exactly where to find that , but if you dig around enough you should be able to find it. I am curious about what exact unit you have, brand and where you got it. The Atoto A6 line has the MT8127 but has alps-mp-m0-mp8 v1.51 fw.
stabone00 said:
Sorry I can't tell you exactly where to find that , but if you dig around enough you should be able to find it. I am curious about what exact unit you have, brand and where you got it. The Atoto A6 line has the MT8127 but has alps-mp-m0-mp8 v1.51 fw.
Click to expand...
Click to collapse
My unit is from ebay (ebay.com/itm/Quad-Core-Android-7-1-3G-WIFI-7-Double-2DIN-Car-Stereo-MP5-Player-GPS-Navi-Map/132633695776?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649).
Not yet found the solution.
The closest thing I found is here : needrom.com/download/swm-8802
I'm pretty sure I saw v1.4 floating around somewhere. If you find it, or any other previous version, you could flash it to get running and try updating ota.
stabone00 said:
I'm pretty sure I saw v1.4 floating around somewhere. If you find it, or any other previous version, you could flash it to get running and try updating ota.
Click to expand...
Click to collapse
Keep getting s_ft_enable_dram_fail (4032) error for every ROM that I found.
That's why I'm looking for the exact version of 'ALPS.LD-KK1.MP10.V2.3'.
Please keep me posted if you found something new.:fingers-crossed:
Here you can see the configs while it was working.
needrom.com/download/mt8127-alps-ld-kk1-mp10-v2-3-rom-needed
Found new ROM Here.
https://forum.xda-developers.com/an...ndroid-5-1-t3712020/post77670292#post77670292
Going to try it this weekend.
asiridissa said:
Found new ROM Here.
https://forum.xda-developers.com/an...ndroid-5-1-t3712020/post77670292#post77670292
Going to try it this weekend.
Click to expand...
Click to collapse
Did not worked for me
Still No luck with this
I beleave this is the chipset.
https: // 1drv.ms/u/s!ApxCoSSbFf-6ha5nB1o8ZoZevJ3-ow
Anyone know where to by this?
And how do you call it?
Related
Hi all,
I just rooted and installed CM7 on this phone, to help out a friend.
I convert his GEN1 phone to GEN2.
I tried to search for the a new radio update but I couldn't fine any.
Someone please knows where I can download it? Does it actually exist any update?
Thanks a lot in advance.
I think Gen 2 the new version of the radio? Not too sure though.
That probably is the case, since I can't find any post related to the radio updates..
Cheers mate!
yukinok25 said:
That probably is the case, since I can't find any post related to the radio updates..
Cheers mate!
Click to expand...
Click to collapse
NP. I may have found confirmation: http://androidforums.com/san-francisco-all-things-root/322886-gen2-please-read.html#post2599761
Has anyone had any luck finding a custom recovery, kernel or ROM for our device yet?
If yes, PLEASE post anything you find here!
I've already tried the Chinese cwm for it, it's a bit... meh
(Sorry about making a new thread, couldn't find the old one.)
JTzR said:
Has anyone had any luck finding a custom recovery, kernel or ROM for our device yet?
If yes, PLEASE post anything you find here!
I've already tried the Chinese cwm for it, it's a bit... meh
(Sorry about making a new thread, couldn't find the old one.)
Click to expand...
Click to collapse
Nope - keep checking every day but still no joy :crying: hopefully one should turn up soon
JTzR said:
Has anyone had any luck finding a custom recovery, kernel or ROM for our device yet?
If yes, PLEASE post anything you find here!
I've already tried the Chinese cwm for it, it's a bit... meh
(Sorry about making a new thread, couldn't find the old one.)
Click to expand...
Click to collapse
Nope, nothing new yet.
I think it's not necessary to ask for, but just wait for and have a look everyday
Hope it will come soon.
Best regards
Franky
Can someone provide a link to Official Android Wear 2.0 or Wear OS for Ticwatch E and I also need to know the procedure to flash it onto the watch.
nikhel said:
Can someone provide a link to Official Android Wear 2.0 or Wear OS for Ticwatch E and I also need to know the procedure to flash it onto the watch.
Click to expand...
Click to collapse
you told me the way and you asking for it ,,,, my watch its booting without stop ????
razine said:
you told me the way and you asking for it ,,,, my watch its booting without stop ????
Click to expand...
Click to collapse
I guess you didn't notice the time and date of this post and the one which i replied to you. Obviously the issue has been resolved that is why i posted the procedure.
I can post the files from my watch if you want. It working perfectly. With the same procedure.
thnx
nikhel said:
I guess you didn't notice the time and date of this post and the one which i replied to you. Obviously the issue has been resolved that is why i posted the procedure.
I can post the files from my watch if you want. It working perfectly. With the same procedure.
Click to expand...
Click to collapse
don't get me wrong bro i am just getting nervous when i saw it in bootlooping and i will thank you again but now it on bootloop what i should do
razine said:
don't get me wrong bro i am just getting nervous when i saw it in bootlooping and i will thank you again but now it on bootloop what i should do
Click to expand...
Click to collapse
Even i was in the same situation, but don't worry. As i told you mine was also on bootloop. Let me do one thing, I can post files from my watch. try to flash it on yours. That should work i guess.
nikhel said:
Even i was in the same situation, but don't worry. As i told you mine was also on bootloop. Let me do one thing, I can post files from my watch. try to flash it on yours. That should work i guess.
Click to expand...
Click to collapse
Did you find a way to get wear os on the ticwatch e? Ive been searching all over, i looked through your posts cause it sounded like you may have posted one but i havent found it. THank you
darbos said:
Did you find a way to get wear os on the ticwatch e? Ive been searching all over, i looked through your posts cause it sounded like you may have posted one but i havent found it. THank you
Click to expand...
Click to collapse
Follow this
https://forum.xda-developers.com/sm...s/ticwatch-e-chinese-version-ticwear-t3781183
would anyone have stock rom for tag heuer connected 45?
Hi dear ppl,
I have Teyes SPRO Head Unit and it was amazing and steeting wheels control worked fine. Then i updated on newer version CC2 and firmware is alot snappier etc.
BUT steering wheel control app wont just work, and i would like if someone can extract the app from original spro firmware, i would like to install that older version.
Or you have anyother app i wpuld like to try it.
Thx in advance
Same here
Im experiencing the same problem, I read in the documentation and also in a couple of Russian forums, that the solution is install the previous software version. ?
I'll try that tomorrow, and will let you know if that resolves my problem. The update, btw, is not a big one I think... I can live with the previous one ?
Linguel said:
Same here
Im experiencing the same problem, I read in the documentation and also in a couple of Russian forums, that the solution is install the previous software version. ?
I'll try that tomorrow, and will let you know if that resolves my problem. The update, btw, is not a big one I think... I can live with the previous one ?
Click to expand...
Click to collapse
Hey! I'm also having the same issue. Could I ask you to send me a link with the older apk, since I can't find it anywhere
Can someone send me older Control.apk?
older Control.apk
localos said:
older Control.apk
Click to expand...
Click to collapse
Thanks dude. I tried to use it on my CC3, it reads the keys but does not bind them ;(
TheDarkKnight1 said:
Thanks dude. I tried to use it on my CC3, it reads the keys but does not bind them ;(
Click to expand...
Click to collapse
Thanks again, same thing it doesn't let me bind the keys. Any idea what have Teyes done to lock the binding with the app that they supplied only? I can share the app if you want.
Hi Please, I need help !
I bought a T95Z PLUS Android 12 - Allwinner H618 - 4 GB/32 GB
Model Pixel 3
Version bigdroidOS 2.0.1
Amdrpod PS Build 12.1.A3
Every time I want to update from System Update I got a error:
Battery too low or in battery saving mode.
and I cant update.
How I can fix the problem ?
Thanks.
marcelopc said:
Hi Please, I need help !
I bought a T95Z PLUS Android 12 - Allwinner H618 - 4 GB/32 GB
Model Pixel 3
Version bigdroidOS 2.0.1
Amdrpod PS Build 12.1.A3
Every time I want to update from System Update I got a error:
Battery too low or in battery saving mode.
and I cant update.
How I can fix the problem ?
Thanks.
Click to expand...
Click to collapse
You're supposed to use the other update app. They put the error in to prevent updating from the wrong source, I believe. The one we're supposed to use is in the list of apps. Instead of in Settings.
perfectswanson said:
You're supposed to use the other update app. They put the error in to prevent updating from the wrong source, I believe. The one we're supposed to use is in the list of apps. Instead of in Settings.
Click to expand...
Click to collapse
Thanks !
marcelopc said:
Thanks !
Click to expand...
Click to collapse
There's a chance I could be mistaken I'll let you know if I get any roms or info from my seller on Amazon.
I just bought mine in Amazon.co.uk and my firmware is: 12.1.A4_20220923-1111
I have the same box and the status and navigation bars are missing! Anyone have any ideas to solve this? I have the latest firmware available for this box if anyone needs it. T95Zplus-H618-A5 and this one will work as well...X98HPRO_20220922-2218
You are in for a not so fun time with this box, IMHO. It's some adjusted version of tablet android 12 that is (seemingly) purposely crippled as far as permissions and user interface (as you noticed). It's pretending to be a Pixel 3.
I was unable to obtain permissions or even a proper interface after some time of trying. If anyone has tips as far as how to interact with this octagonal menace, please post them here. In exchange here is the specific ID of the board and a link to a picture i've just taken. It's obvious that Amazon has about a billion of these to sell, it'd be nice if we could optimize these little boards for something other than consumer control
Processor:
isocom memdnno32g z22040790***** mos05
With 4x (I've got the 4/32 gig version):
5*E77 d9pql
and Sticker:
t95zplus v5.0 aw869a 8d3
ycx20220826022 q9 q1
ID:
t95zplus-h618-**-**** ****
here's a pic of the board, just for fun:
Oranguman said:
You are in for a not so fun time with this box, IMHO. It's some adjusted version of tablet android 12 that is (seemingly) purposely crippled as far as permissions and user interface (as you noticed). It's pretending to be a Pixel 3.
I was unable to obtain permissions or even a proper interface after some time of trying. If anyone has tips as far as how to interact with this octagonal menace, please post them here. In exchange here is the specific ID of the board and a link to a picture i've just taken. It's obvious that Amazon has about a billion of these to sell, it'd be nice if we could optimize these little boards for something other than consumer control
Processor:
isocom memdnno32g z22040790***** mos05
With 4x (I've got the 4/32 gig version):
5*E77 d9pql
and Sticker:
t95zplus v5.0 aw869a 8d3
ycx20220826022 q9 q1
ID:
t95zplus-h618-**-**** ****
here's a pic of the board, just for fun:
Click to expand...
Click to collapse
Mine is working ok for now. Changed Launcher to SquareHome. There are a few settings missing, but for the price, I can't complain. I've learned how to flash firmware. The box came rooted which helps. Best boxes to buy are the AmLogic processors. They have more support available.
TheGhost1951 said:
I have the same box and the status and navigation bars are missing! Anyone have any ideas to solve this? I have the latest firmware available for this box if anyone needs it. T95Zplus-H618-A5 and this one will work as well...X98HPRO_20220922-2218
Click to expand...
Click to collapse
I'd love to get the firmware please... our one just isn't performing correctly.
glennss said:
I'd love to get the firmware please... our one just isn't performing correctly.
Click to expand...
Click to collapse
I will upload it in a little while. Do you know how to flash the firmware?
TheGhost1951 said:
I will upload it in a little while. Do you know how to flash the firmware?
Click to expand...
Click to collapse
Tired to use in inbuilt updated with a local image but no luck... also tried flashing from an sdcard using PheonixCard 3.09 but again no luck , could be the firmware i have.
Any tips gratefully received.
glennss said:
Tired to use in inbuilt updated with a local image but no luck... also tried flashing from an sdcard using PheonixCard 3.09 but again no luck , could be the firmware i have.
Any tips gratefully received.
Click to expand...
Click to collapse
Do you get errors?
TheGhost1951 said:
Do you get errors?
Click to expand...
Click to collapse
No , either black screen or just sits there saying "copying"
glennss said:
No , either black screen or just sits there saying "copying"
Click to expand...
Click to collapse
I either use Pheonix Suite with a USB A to A cable or unplug power from the box and insert the micro SD card created with Pheonix Card and then plug in power. I never have seen the words copying on the TV just a progress bar. Same the other way. Any how, getting ready to upload the latest firmware I have.
TheGhost1951 said:
I either use Pheonix Suite with a USB A to A cable or unplug power from the box and insert the micro SD card created with Pheonix Card and then plug in power. I never have seen the words copying on the TV just a progress bar. Same the other way. Any how, getting ready to upload the latest firmware I have.
Click to expand...
Click to collapse
Great ... its probably the firmware i have... was from some random site
Here you go,
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
glennss said:
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
Click to expand...
Click to collapse
I just load the image and then click or tap "burn", that's all and let it do it's thing.
Guides for future reference?
glennss said:
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
Click to expand...
Click to collapse
I just load the image and then click or tap "burn", that's all and let it do it's thing