Related
https://www.mediafire.com/?922rx2xn53yt72r
Here it is. Enjoy. And yes it works on mine :fingers-crossed:
It's a new Official Update
Changelog taken from Android Police
-A new radio image.
-Touchscreen fixes (addresses BACON-55, which was originally reported and subsequently brought to our attention by Ausdroid). There's also an extensive thread on OnePlus' forums about it, among many other places (forum account needed).
Update: The fix is not complete, as reports of jumpiness are surfacing once again. It did fix the deadzone / random touches issue which prevented me from unlocking my phone for 10-15s at a time as I simply couldn't trace my pattern due to all the jumping around.
Unfortunately, the grounding issue which results in multitouch going nuts remains unfixed and must be resolved via another driver update. Another excruciating wait begins.
-Decreased power consumption in idle state (fixes BACON-599 which we wrote about here).
-Unspecified audio fixes.
-CVE-2014-4943 and another unspecified security update.
MD5 : 7538A068384C52FF6CA06C4B128B5ED1
P/S : I didn't have that jumpiness of sort, mine is working fine.
Flashing this worked perfectly for me. Thanks.
Glad to see it worked
Good job, works great
ravearamashi said:
https://www.mediafire.com/?922rx2xn53yt72r
Here it is. Enjoy. And yes it works on mine :fingers-crossed:
MD5 : 7538A068384C52FF6CA06C4B128B5ED1
Click to expand...
Click to collapse
Awesome!!!! Thanks so much
what is modified updater-script, is this the ota which is pushed by oneplus?
Is there a change log anywhere?
Fist and foremost,THANKS !
Could you perhaps elaborate on the update a bit ? e.g. this the official NEW update ?
boomam said:
Is there a change log anywhere?
Click to expand...
Click to collapse
You can check it out here. http://www.androidpolice.com/2014/0...ed-fixes-here-is-the-zip-for-manual-flashing/
Seems to work fine, thanks
Thanks m8, works perfectly.
What does it mean by modified updater script?
nice
Thank you
surronix said:
What does it mean by modified updater script?
Click to expand...
Click to collapse
I'm wondering the same thing. Can I flash this if I am on CM nightlies?
GETCASHMONEY said:
I'm wondering the same thing. Can I flash this if I am on CM nightlies?
Click to expand...
Click to collapse
No, it's strictly for CM11S
See, back when XNPH30O came out, lot of people couldn't update using OTA method when they are rooted/running Xposed/custom kernel and so forth because the OTA update would check the files before updating begins which of course the update would fail on devices running the aforementioned stuff. And a guy named Ludester modified the updater-script to bypass that file check and of course the update worked on these modified devices. So fast forward to this update, I just did the same thing.
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
joeee89 said:
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
Click to expand...
Click to collapse
Yes, and wipe cache after flashing then reboot.
joeee89 said:
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
Click to expand...
Click to collapse
Yes you can
wipe
there is no need to wipe
i just installed it an no problems
i didt no wipe
Nope.
Phone is stuck at the OnePlus Logo after flashing via TWRP. Wiping caches and re-flashing didn´t help.
Hi.
I work in China ow and then and i bought my self a Lenovo K920 yesterday. A GREAT phone but sadly the it does not have any Google programs/system but just a similar Chinese system which i know nothing about. I have found some ROMs out there but on some forum people warns about flashing the Chinese K920pro as it will brick.
Any one here who could tell me how to proceed.... Thanks
__ZOOM__ said:
Hi.
I work in China ow and then and i bought my self a Lenovo K920 yesterday. A GREAT phone but sadly the it does not have any Google programs/system but just a similar Chinese system which i know nothing about. I have found some ROMs out there but on some forum people warns about flashing the Chinese K920pro as it will brick.
Any one here who could tell me how to proceed.... Thanks
Click to expand...
Click to collapse
There's a video showing how to unlock the developer option in settings and the switch to Google UI is inside the Developer Option. Looks quite awesome, im gonna own this phone later.
AyieStyx said:
There's a video showing how to unlock the developer option in settings and the switch to Google UI is inside the Developer Option. Looks quite awesome, im gonna own this phone later.
Click to expand...
Click to collapse
Yes, i read about this too..... I have the Developer Option available already (a few taps on the version number) but no Google UI option there, just 3 options to chose from. Or do you know how to get more options?
I did a try a russian "2014-10-14--10-16-45 K920_ROW_S126_140825.7z" with their "twrp_2.8.0.1_recovery_K920Pro.7z" file but it "killed" my phone....
I can still access the Lenovo Re ovey and the root menu though.. But the operating system just hangs at the Chinese 4G logo.....
Im not able to restart the TWRP again. I start to dislike this odd phone now after spending 30-40 hours to try to get google play, gmail etc to work.. I should have bought a HTC or Samsung instead..
__ZOOM__ said:
I did a try a russian "2014-10-14--10-16-45 K920_ROW_S126_140825.7z" with their "twrp_2.8.0.1_recovery_K920Pro.7z" file but it "killed" my phone....
I can still access the Lenovo Re ovey and the root menu though.. But the operating system just hangs at the Chinese 4G logo.....
Im not able to restart the TWRP again. I start to dislike this odd phone now after spending 30-40 hours to try to get google play, gmail etc to work.. I should have bought a HTC or Samsung instead..
Click to expand...
Click to collapse
You shouldn't do that at the early release of the phone. Even any phone. You need to wait for the official rom release. How about you try fastboot and flash the twrp/cwm recovery. From the recovery use sideload to reflash the stock rom. Keep in mind that you should wait for a review or someone who actually successfully flash the custom roms/non-official rom. Except root, theres a number of successful root.
AyieStyx said:
You shouldn't do that at the early release of the phone. Even any phone. You need to wait for the official rom release. How about you try fastboot and flash the twrp/cwm recovery. From the recovery use sideload to reflash the stock rom. Keep in mind that you should wait for a review or someone who actually successfully flash the custom roms/non-official rom. Except root, theres a number of successful root.
Click to expand...
Click to collapse
I know but i was desperate to get Google to work... Bricked or Chines system is same same for me...
Fastboot and TWRP cant find any device. Factory reset or wipe did not help either. Can access boot menu and Lenovo recovery, but need a recovery file first, and then we have problem with that i cant access the phones internal storage.... And this crap has no SD-memory either...
$700 down the drain for sure... Still have to buy a new phone though, and im still in China... Have to fly to HK to get a new phone... This is going to be expensive.
Thats what happen when you flash the unofficial rom. You know the risk. Make sure you have installed fastboot driver and adb driver. Im sure you can reflash the rom after you able to enter fastboot
AyieStyx said:
Thats what happen when you flash the unofficial rom. You know the risk. Make sure you have installed fastboot driver and adb driver. Im sure you can reflash the rom after you able to enter fastboot
Click to expand...
Click to collapse
Drivers are okay and have worked before. But now when running ABD Devices command, it show "? unautorized" so i get stuck there.
I SOLVED IT....... Except that the both SIM-card shows a red X.. but everything else seems, camera, GPS, WiFi to work AND it has GOODLE PLAY etc now.. Anyone know how to make the phone to work again?
I have tried ABD, Fastboot, TWRP, MiFlash, QPST, QMSCT_DL_EMMC_TOOL but nothing worked except following this instruction
I used the files in the Bin-folder of K920_ROW_S126_140825_user_1408251128 rom
https://forums.lenovo.com/t5/Lenovo-Phones/Lenovo-K910-Vibe-Z-bricked/m-p/1611710#M6838
Flashed back to the Chinese version and the SIM-cards works again... Any idea why the SIM-cards stops to work on the ROW rom?????
__ZOOM__ said:
Flashed back to the Chinese version and the SIM-cards works again... Any idea why the SIM-cards stops to work on the ROW rom?????
Click to expand...
Click to collapse
Slightly different hardware and radio modules.
On lenovo forum there is something about radio calibration.
Hi guys,
Im getting PMs about this...
Yes, I have resolved it. It works to 100% with all i have tested. I will share it with you as soon im back from my business trip in a week or two.
Z
__ZOOM__ said:
Hi guys,
Im getting PMs about this...
Yes, I have resolved it. It works to 100% with all i have tested. I will share it with you as soon im back from my business trip in a week or two.
Z
Click to expand...
Click to collapse
Hi,
can you share with us the method you used to flash row rom on a Chinese K920?
thanks
row rom on china k920
i have chinese version of k920 and i hate the chinese rom on it!Is it possible to explain how can i have the row version working on my phone and have the radio fixed and have the two sim working!I tested row rom and my sims didnt work (no signal).Any help will be appreciated!
lenovo K920 how to active sim card
Hello good friend merry christmas.I have lenovo k920 Chinese version and I flashed the rom k920_ROW_S126_140825, only sim that do not work, how did you solved this? rom the Chinese version was not able to install google play.Can you help me solve this problem ? thank you
flash row rom to china k920pro
-Download ROW firmware in needrom.com and download CN rom modem file.
-Copy the downloaded "NON-HLOS.bin" file.
-Paste "NON-HLOS.bin" to ROW Rom bin folder.
-Flash Row rom the phone (QPST)
Finaly simple and basicly solution.
CN rom Modem file: https://mega.co.nz/#!mMIilAzZ!9DB3fn-69ewVKzdwWFdeTeKL7Si7zf9gims6Cl7OTMk
soulfreem said:
-Download ROW firmware in needrom.com and download CN rom modem file.
-Copy the downloaded "NON-HLOS.bin" file.
-Paste "NON-HLOS.bin" to ROW Rom bin folder.
-Flash Row rom the phone (QPST)
Finaly simple and basicly solution.
CN rom Modem file: https://mega.co.nz/#!mMIilAzZ!9DB3fn-69ewVKzdwWFdeTeKL7Si7zf9gims6Cl7OTMk
Click to expand...
Click to collapse
Did you try it? Is it work?
vgiazitzis said:
Did you try it? Is it work?
Click to expand...
Click to collapse
of course it works otherwise i wouldnt post the solution.After you flash the rom everything works flawlessly but dont update ota to the latest version because you will lose the radio again.
Thank you very much. I will try it right now.
soulfreem said:
of course it works otherwise i wouldnt post the solution.After you flash the rom everything works flawlessly but dont update ota to the latest version because you will lose the radio again.
Click to expand...
Click to collapse
2 sims works? Could you explain me the what I do? The qualcomm program is in chinese. Please. Thank you
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Same here, no solution found ATM :/
I-Immortal said:
Same here, no solution found ATM :/
Click to expand...
Click to collapse
You guys should report all bugs to the cyanogenOS forum here -> http://community.cyngn.com/c/devices/z1
If they don´t know about the bugs, they can´t fix it.
And while you are at it raise your voice here (because we need inbuild root ) -> http://community.cyngn.com/t/reques...ring-and-inbuilt-superuser-access/97/4?u=othe
Wow nice thank you ! I didn't know where the official support was ^^
U touch buttons not funtioning
Pontifex007 said:
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Click to expand...
Click to collapse
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Sydarij said:
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Click to expand...
Click to collapse
I dont think resetting will help. I'm just waiting till the next update, or the big update to 6.0 Marshmallow early next year. Really weird that they haven't fixed it yet, shouldnt be that difficult..
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back. https://www.androidfilehost.com/?fid=24269982087008212
MrColdbird said:
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back.
Click to expand...
Click to collapse
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Gabriü said:
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Click to expand...
Click to collapse
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Sydarij said:
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Click to expand...
Click to collapse
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
U touch soft touch button not working
Gabriü said:
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
Click to expand...
Click to collapse
they have removed it... im still waiting for an update. pretty frustrated they removed it so early when i just bought it a week ago! Arghhh!
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
MrColdbird said:
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
Click to expand...
Click to collapse
I can't answer on the official thread as I don't have more than 10 posts, anyway, thanks for the feature, I tested it on CM12.1-Nightly and it works like a charm! Unfornately i noticed that after flashing the zip, on "buttons" settings, the "enable on screen nav bar" option has disappeared, and I can't go turn them off. Also the functionality is not the same as when i bought it, in fact if I touched the button, it would use the back feature instead of going on the home screen.
Anyway, thanks again!
You can adjust the actions that occur by editing the Generic.kl file included with the installer zip file. Adjust them as needed / wanted.
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Gonzaman said:
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
Click to expand...
Click to collapse
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
sadrettin said:
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
Click to expand...
Click to collapse
install it on your zuk and try to uninstall it by your ways .
zuk z1 home button issue
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Sydarij said:
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Click to expand...
Click to collapse
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
sadrettin said:
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
Click to expand...
Click to collapse
Flashify keeps crashing on my Zuk.. weird !
Hello guys, I noticed this morning that MM was officially released today. I followed the steps on to update my phone. I downloaded the rom for 551ml put it on my root of my internal storage, after that a pop up showed that there was a system update. I did the update and now my phone wont turn on now. It vibes twice and nothing comes on the screen. I have no idea how to fix it. I was on the latest firmware that system update would give me (184). If someone isn't busy could they possibly help me out. thx..
Same issue here, have you found a solution yet?
arturocr said:
Same issue here, have you found a solution yet?
Click to expand...
Click to collapse
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
You cant get into recovery after fastboot?
Sent from my ASUS_Z00AD using XDA Premium HD app
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Same for me...
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to to that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
baonxxx said:
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
Click to expand...
Click to collapse
I found the link!
You need You need asus usb and intel soc drivers
Heres
http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
Try this: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
I used XFSTK to upload firmware etc... but after upload firmware, the phone will vibrate twice and download of OS will not start... the soft will try 20 attemps to connect with the phone and the OS part can't be download on the phone... I'm stick at this point.
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenf...l-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
quarterbreed said:
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
Click to expand...
Click to collapse
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
glad to know that it worked. but sad to know that despite that you didn't hit thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
If you don't need to use twrp everyday (maybe just a backup from time to time) you'd better keep stock recovery and whenever you need something from twrp, you just boot into it without flashing with the usual "fastboot boot twrp.img" command. That way if you ever upgrade again you don't have to remember whether you removed twrp before. But that's just an opinion, since if done that way, you'd need to have yor phione hooked to a computer to get into twrp, an that's not always possible.
thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
that link saved my phone, thanks man
sukhwant717 said:
glad to know that it worked. but sad to know that despite that you didn't hit thanks
Click to expand...
Click to collapse
I just hit thanks now, I was at my limit of 8 at the time.
After installing RR, restore the original firmware of Xiaomi Mi A1, the problem is that no longer stable wifi connection, find networks but do not connect, try everything and there is no way to connect to a Wi-Fi network.
There is someone who has happened to him this before.
speedunderx said:
After installing lineageOS 15, restore the original firmware of Xiaomi Mi A1, the problem is that no longer stable wifi connection, find networks but do not connect, try everything and there is no way to connect to a Wi-Fi network.
There is someone who has happened to him this before.
Click to expand...
Click to collapse
yeah me too
---------- Post added at 06:21 AM ---------- Previous post was at 06:17 AM ----------
what to do,,some body Help please,is that going to Mi Service Center Is the Last Option ?
DebGourav said:
yeah me too
---------- Post added at 06:21 AM ---------- Previous post was at 06:17 AM ----------
what to do,,some body Help please,is that going to Mi Service Center Is the Last Option ?
Click to expand...
Click to collapse
I imagine that soon they will solve it, since the same thing is happening to many of them, what you can do for now is to install RR once again, since Wi-Fi works there.
same issue facing..
speedunderx said:
I imagine that soon they will solve it, since the same thing is happening to many of them, what you can do for now is to install RR once again, since Wi-Fi works there.
Click to expand...
Click to collapse
bhuvneshkapoor01 said:
same issue facing..
Click to expand...
Click to collapse
i flashed RR and went back and wifi doesnt work says its desabled, regreat my actions need a fix for this tho
Don't know what kind of bug is this, i flashed 7.1.2 and almost 3-5 firmare, still no luck. went back to RR.
Nautilus99 said:
i flashed RR and went back and wifi doesnt work says its desabled, regreat my actions need a fix for this tho
Click to expand...
Click to collapse
bhuvneshkapoor01 said:
Don't know what kind of bug is this, i flashed 7.1.2 and almost 3-5 firmare, still no luck. went back to RR.
Click to expand...
Click to collapse
gess we are stuck untill oficial 8.1
Nautilus99 said:
gess we are stuck untill oficial 8.1
Click to expand...
Click to collapse
Someone has tried installing an older version of RR, since in the last compilations made changes in the registry of the MAC of Wifi and difinitivamente is that the problem.
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
speedunderx said:
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
Click to expand...
Click to collapse
I just tried it and it does not work, after installing the kernel it does not recognize the mac on the device
I tried with scooti stock rom , and it works. but for orignal stock rom it didn't work. thanks mate.
speedunderx said:
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
Click to expand...
Click to collapse
RR is full of bugs. i flashed it too and i have the same problem. Tried reflashing stock nogut, latest oreo both (with full wipe including internal storage). none solved the problem. please post it if u find a fix.
sachin273 said:
RR is full of bugs. i flashed it too and i have the same problem. Tried reflashing stock nogut, latest oreo both (with full wipe including internal storage). none solved the problem. please post it if u find a fix.
Click to expand...
Click to collapse
We are in the same, I probe everything and there is no way to start the Wi-Fi with stock, hopefully some solution comes out soon, for now I stay in RR since there works the wifi.
I fixed flashing persist.img again on fastboot.
gsnmartinh said:
I fixed flashing persist.img again on fastboot.
Click to expand...
Click to collapse
Please share the procedure, how to flash persist.img
Well, just find persist.img in the stock file like C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images
then turn off your phone and enter into fastboot mode (down volume + power)
connect the phone to pc
the search for cmd
write : fastboot devices and if it shows number it means that is connect
then write: fastboot oem unlock (to unlock bootloader)
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
gsnmartinh said:
Well, just find persist.img in the stock file like C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images
then turn off your phone and enter into fastboot mode (down volume + power)
connect the phone to pc
the search for cmd
write : fastboot devices and if it shows number it means that is connect
then write: fastboot oem unlock (to unlock bootloader)
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
Click to expand...
Click to collapse
I tried with MetaPhoenix Kernel, and its working fine for me, one thing of this is best in the market, almost everytime 1.6Gb ram free, and stability and features are great. Thanks mate for the guide.
I do not speak English, but thanks to this page I was able to solve the problem. It's a persist.img that worked for me: D
xiaomifirmware com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1
gsnmartinh said:
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
Click to expand...
Click to collapse
i am on stock nougat now so i tried flashing nougat persist image through cmd. but it says failed-this image doesnt allow download
does that method from the site work??
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
i need to know if i flash latest stock rom with the persist the sit is giving will it work? i miss the stock...