Related
hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues
I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?
I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk
Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.
The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?
Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.
Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers
https://www.aliexpress.com/store/pr...32699671881.html?spm=2114.12010612.0.0.KbDCzA
The UI and other specs are very similar to the HotAudio test preview (thread here). Has anyone had a chance to get their hands on one of these yet? I'm deciding between this or a Joying unit.
Any input is appreciated!
PX3 RK3188 Android 7.1.1 DVD VW GPS 2G ram
Just received and installed this Head unit in my vw touran 2004.
It looks like the specifications are the same : https://fr.aliexpress.com/item/Pure...32582906631.html?spm=2114.13010608.0.0.UFTkAD
The unit is a Bonroad C1120801A4/A5 (RK3188 Android 7.1.1 Lecteur DVD de Voiture pour Octavia Fabia Praktik EOS GPS Navigation Avec 1024*600 HD 8 "
So far, i'm satisfied with the unit :
- Radio is now working and stable .RDS works fine (with the last DCMU update). (You need to put a double fakkra antenna plug to get the radio stable on vw cars)
- GPS IGo is fine but not in French, Waze great
- canbus is functional
- Wifi rear camera ok
- BT external micro (mono) installed, i need to shout/YELL (it is an issue...)
When calling, both mic works (front mic and ext. roof mic)
google voice research unusable
I'm waiting for documentation from the supplier as there were no instructions in the box.
Do not hesitate, if you need more informations, pictures and tests. :good:
I tried Kingo root but it failed.
I also bought a car radio on aliexpress similar to yours. Px3 cortex a9 for ford focus c-max.
I have exactly the same worries as you with the microphone, the one integrated in the facade I have to stick my mouth on and scream.
The one who plugs externally is the same thing.
Many people talk about a worry with frequencies that are not the same in china and here
300-3400 for china
50-7400 for others
If you can root your device you can change the frequencies with Pimp my rom.
Personally I can not root it.
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
wankun said:
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
Click to expand...
Click to collapse
About 15 to 20 seconds to boot. For sleep functions, I have nightlight or 15s 30s 1mns ect ...
I've the same unit but it doesn't detect OBDII adapter. Any solution?
After trying everything to get the microphone that works for the handsfree kit, I decided to cut the 4th leg of the bluetooth module and solder a mono microphone directly on it. This was my last option because I did not have the c32 connector. This has been a success. People hear me very well now.
I have ordered this one - https://www.aliexpress.com/item/4-C...32691433062.html?spm=a2g0s.9042311.0.0.MbBrvn. Waiting for the the item to arrive. The seller would ship it on 17 July 2017 (Monday).
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
stanley 00 said:
I tried Kingo root but it failed.
Click to expand...
Click to collapse
Can you try the following and see if this gives you root access:
Goto factory settings and instead of typing 126 type *#hct#root#
This may give you temporary root access. Now you can install supersu or magisk to make the root permanent.
Note: I don't have this device or have not used any other Android HU; so I have not tried the steps mentioned above. I found this on the internet. Please try and let us know the result.
Cheers,
Rahul U S
Is your Bluetooth scanning OBDII with this ROM ?
S.Rahus
i tried your password to root but it does not work
" Goto factory settings and instead of typing 126 type *#hct#root# "
Stan
Anyone managed to fix the bad Bluetooth call quality? Any luck with getting root access?
Cheers,
Rahul U S
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Forsaken2703 said:
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Click to expand...
Click to collapse
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Thanks in advance!
Cheers,
Rahul U S
s.rahus said:
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Click to expand...
Click to collapse
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
corolla E12 2din model
I have problems with the sound by hands free, to my listen very low, my unit is the MTCD_XRC_V2.54a_1 with android 7.1.2 ... is there any possibility to get down to version 5 of android?
Forsaken2703 said:
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
Click to expand...
Click to collapse
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
[email protected] said:
Is your Bluetooth scanning OBDII with this ROM ?
Click to expand...
Click to collapse
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Try the latest XRC version 2.54. Please find the attachment.
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Well you're right, if I have the auto sleep option enabled, but programs like Radardroid can not start automatically with the radio, I always have to start them manually.
Hi everyone!
I have a similar unit.
I think that the problem is with android version. In our case 7.1.1.
I had a problem with my OBDII reader and I updated my unit to 7.1.2 and fix it
Now with 7.1.2 I have the same problem with microphone and also I have a problem with USB cameras. Only the DVR app can connect with but only the first time. If I close the DVR app and open it again, camera dont work.
I want to use the USB front camera with Mapillary and iOnRoad but I cant.
Any idea?
Where can I donwload a previos android version? for example 5.1.1 or 6 perhaps its would fix the problems.
Thanks!
I've had a Hizpo 7" no dvd with buttons mcu xrc 2.54 android 7.1.2 2gb 16gb for a week. Came this way so I can't say about previous versions.
My bluetooth microphones (both) work fine for me, calls hear me fine. Even just the internal mic seems good.
I haven't had any bluetooth connection problems.
Android does not see any microphone, there is no speech input in keyboard settings, google voice search hears nothing. Voice recorder apps hear nothing.
Tried a usb mic but that did nothing.
Can't get usb camera to work for DVR. RCA CVI cam works in DVR but doesn't record, does not work in FCAM app however, though rear does.
OBDII worked fine when I first tried it, haven't messed with it since.
Display clear and good.
Haven't seen any bog, even when running nav, audio, video etc.
Audio is so so, lots of noise. Radio reception seems great and RDS works too. Needs an amp.
Wifi reception is great, just a little antenna on the back.
I really like it but for the lack of voice search. It's really fast, I have a load of apps and still tons of space. Runs everything so far.
Nearly instant on, radio is playing in under 2 sec (probably 1).
GPS works good so far, finds my location in maybe 10 sec or less usually. I haven't been thru Pittsburgh yet to say how well it keep its signal.
I just got MTCtools and dialer and will start messing with them tomorrow, hopefully I can get a mic input to android and get voice working, then this will be really great!
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal
ric69 said:
Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal
Click to expand...
Click to collapse
me too ... i am sorry to hear you are having the same issues ... i do feel if i could access the factory settings i could probably fix most issues
is your unit also xonrich?
i was wondering if it is possible to flash 7.1 software on to the unit as it is so so much better to use
the manual they send does not match the 8.1 software it is for 7.1 as ive had both units maybe if we could lay our hands on an 8.1 based manual this would help ?
Yes it's bad story, my unit has no name :laugh: I posted here this morning :
https://forum.xda-developers.com/an...units/8227l-android-unit-8-1-chinese-t3905535
It's incredible to not find any combination to reboot into recovery, I tried all I think
The only acces is MCU Update but without any update ... it's difficult
I have instructions.pdf in system, but there is nothing very important
Mine loses qualizer settings if o turn of car or if i change volume
I am sorry to hear your issues . Maybe this brand unit is not ready for Android 8.1. I am owning ATOTO A6 Pro. It works great even though it is Android 6.0.
Mine is same through seicane website
I found a you tube video
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel
Radio
Mgchata said:
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel
Click to expand...
Click to collapse
I also own an Xonrich unit and the only problem I have is that when the radio tuner is working, the audios of other applications, for example radar announcers, do not sound, but if I turn off the tuner or put another audio source, including internet radio, TuneIn for example, these radar announcements are perfectly heard. The only thing they don't hear is with the radio tuner working.
I could not find the appropriate configuration to achieve it.
regards
Help and additional problems
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Hi.
I also have some issues with the time on the unit being one hour fast, but after it's been on for a minute or two and GPS is fixed the time changes to the correct time.
Where did you buy your canbus for the unit? I have a Volvo V70 '04 which I want the steering wheel buttons to work with.
I'm also having trouble with the Bluetooth option missing in the settings list. Its only possible to pair the unit with Bluetooth trough the phone pair function on the unit. I really want to pair my OBD2 adapter to my unit but am unable to do so when there is no Bluetooth menu.
Is there a possible way to add this function to the unit trough a software upgrade or such?
Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri
Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri
Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!
Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314
Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri
I'm a newbie to this site so apols if I have contravened any site rules!
Hoping someone might be able to help. I bought a 12.3inch HU on AliExpress. Its model number is uis8581a2h10_Automotive, which I think is a FYT HU. It's coded specifically for BMW.
After a full boot everything on the HU works fine. But then if I stop the car, for example to grab something from a shop, when I start the car again the head unit starts up instantly but there's no sound despite Zlink5/Spotify appearing to run properly on the screen. The only option to get sound back is to reboot the head unit and wait for Zlink5 to reestablish a connection with my phone (a Galaxy S10). Interestingly though, even when the music fails to play through the speakers, if I press the microphone button, Google Assistant plays sound and can properly make a phone call played through the car's front left speaker.
Also, when I'm getting no sound after the HU wakes, if I switch to the DAB app, I can hear a millisecond of Spotify music before it cuts off, and then the DAB app also fails to play sound - although it too, like Zlink5/Sportify, responds properly onscreen. So the HU seem to be playing music after waking from sleep, but just not routing it to the amp.
Apparently this unit is supposed to output sound via an aux cable which plugs into the BMW stereo's aux port. However, my unit plays music through the speakers on the aux setting whether or not the aux cable is plugged in. Not sure if that's affecting things?
The final issue is that Zlink5 won't work with bluetooth and WLAN/hotspot at the same time. It switches off WLAN while connecting to my phone via Bluetooth. If I then enable WLAN and set up a hot spot, Zlink5 either switches WLAN off and reconnects via Bluetooth, or else it will connect to WLAN, after which music pauses every second or so.
The sellers have sent me an MCU update file, which I have applied, and I have also tried every option in the HU settings for Car Aux Switch Mode. I can't think of anything else to try.
Can anyone advise whether these problems are likely to be software or hardware related? And has anyone any ideas how they might be resolved?
Many thanks!
In regards to not being able to use Wi-Fi and Bluetooth together when you use zlink it uses the wifi to connect to you phone in the background. If you manually turn it back on it will disconnect from your phone. My advice would be to put a SIM card in your unit.
deadeye920 said:
In regards to not being able to use Wi-Fi and Bluetooth together when you use zlink it uses the wifi to connect to you phone in the background. If you manually turn it back on it will disconnect from your phone. My advice would be to put a SIM card in your unit.
Click to expand...
Click to collapse
Thanks Deadeye, that explains that one, and also explains why it eats my phone's battery
Post MCU version and Android system info
marchnz said:
Post MCU version and Android system info
Click to expand...
Click to collapse
Many thanks for getting in touch Marchnz. The MCU is ZLH_BMH220425A_8581. The original version was ZLH_BM_OS_1.37, but the seller has since provided an update to ZLH_BM_OS_1.53 which has fixed the problem.
Not FYT, requested moderator move to (Android head-units) forum
The_Chowder said:
Many thanks for getting in touch Marchnz. The MCU is ZLH_BMH220425A_8581. The original version was ZLH_BM_OS_1.37, but the seller has since provided an update to ZLH_BM_OS_1.53 which has fixed the problem.
Click to expand...
Click to collapse
hello. can you send me 1.53 update? i have 1.48 and the same problem
masivec said:
hello. can you send me 1.53 update? i have 1.48 and the same problem
Click to expand...
Click to collapse
HI there, I've found the update but it's 1.4Gb or so. Can you send me a DM with your email and I'll send it to you via Wetransfer? Obviously its use would be at your own risk, as I'm not sure whether it will work across different manufacturers/companies.
Hi!
Same issue with Sound, also a BMW.
But my MCU is XRC_BML220608A_8581
Other info:
Processor UIS8581
Model: uis8581a2h10_Automotive
Compilation: uis8581a2h10_Automotive-userdebug 10 QP1A.190711.020 19110 test keys
Manufacter / Brand: SPRD
MCU: XRC_BML220608A_8581
CPUZ and Aida show: Android 10 Api 29
I have XRC_BMH221015A_8581 (uis8581a2h10_Automotive 12,3 its for 4gb+128). write if u need