Hi, i bought a DZ09 SmartWatch from an internet website, so i don't know if it is original or Chinese.
Last day, the home key button won't work, when i pull the battery, the button work to turn it on but when the Watch is turned on, the button won't work, it means that the button work only to turn on the watch
I did a factory rest but the button still won't work
Can anyone give me the sollution... and thanks
Related
hello...
my on/off button is defect. so i cant switch it on. Only via reset
can i configure another button for reactivation from standby? because that does not work anymore too
thanks for help
not sure about hermes but my phone turn on at the press of any key unless i set it only to turn on by on button in buttons in settings
Go to the settings, then to system, then go to the keylock options in there and set it to not lock at any time.
Works with any key, but its not really a good idea to have that in your pocket.
I would say you should get the button repaired instead.
Thanks a lot guys...
does someone knows how i can switch off the phone? everytime i want to swithc it off i have to push the reset button or do a soft reset :/ i thin k a regular shutdown would be better...
i friggin have the same problem. My girl dropped my phone and the power button is messed up...
I press the camera button to turn on tho.. i cant turn off unless i let it sit and it does it itself.
http://www.mobiletopsoft.com/pocket-pc/download-psshutxp-turn-off-display-off-pda-0-29.html
Thank You ^^^
hi friends
i hav htc touch gsm and now its power button is totally dead, i was starting it from sleep mode with headphone by double pressing its button(just like we do while making calls )now the problem is that the mobile gets turned off now i want to start it is there ne alternate ways to do that ..i visited the service center they said that to recover the problem some hardware must be changed which cost me more than 50% of the moblie price....help me out guys i want to start my phone....
thnx
me too
hi me too facing the same problem did u get any solution for this if there is some way out to shift the function on the camera button maybe i don know.
OP, what did they say needed to be changed on the phone, did you need a new power button switch or something? you could always try and source a replacement one.
If ti is the button that hits the switch is broken, maybe a new case?
go to setting>system>key lock>and select dont lock buttons
when your mob sleeps simply press any button to on the disply
I looked for similar topic but couldn't find it,I can't use power button on my hd anymore,it got broken beacuse of pressing it very often during day to turn the screen on and off...I was wondering if there is an application to assign power button function to home key so when pressing it the screen turns off and on?
Hi, having the same problem, POWER BUTTON is defect/broken, it doesn't have a resistance when I push it in. I can still switch the device on and off, but I have to press the power button hard and the power button does not feel spring loaded any more.
Are there more people having this issue and is there anybody haveing it send for warranty repair already?
Mine is a German O2 device.
Thanks
hit007
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Luka keko said:
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Click to expand...
Click to collapse
Hello there, I'm from Brazil, as my english may not be the best lol... So I have same phone as you and similar problem... The problem is that volume down doesn't work. Other buttons work fine though. Also, the phone always enters in safe mode, so I assumed the volume down button is being pressed all the time. Except that, I realized that I could enter in download mode (I tested, if I don't press volume down in the combo 'power button + home + volume down' it won't get into download) and if I press volume down to cancel it will actually cancel and restart the phone. So the button is working... Here is the part where I think the problem is similar. There was a time I turned the phone off, through the system as we normally do, and then it wouldn't turn on again. I realized it was actually turning on, but the screen was black. I tried entering download mode and tested on odin and it actually had entered download mode, but the screen was black... Then after several attempts it finally got back on again... So I think there is something related with the button circuit with the lcd, I don't know. I would like to know if you got to any solution there. I guess that instead of bringing you any solution I'm bringing another problem lol. Well if I have any other information I will post it here. Best wishes.
Hi i have a Fossil q explorist 3 and im having trouble getting into recovery mode.
I uninstalled an app on the watch and its now in a weird bootloop/ unusable state it flashes the watch face and i can access google assistant but nothing else apart from the power off and reboot menu.
Because of this the battery depleted pretty quickly and i couldnt access the recovery menu, I managed to get to the menu once but hit the wrong button and it exited rather than let me reset it
Can anyone help me get the watch into recovery mode I have tried
1. Powering off the watch via the menu and trying the button combinations of top button and power ,bottom button and power , letting go of the power button and holding either button and repeatedly pressing the buttons after the vibration when it turns on.
2. I have also tried tapping on the fossil logo on the screen after it turns on and sliding from the top left to bottom right of the screen and nothing has got me back in to the recovery menu.
So does anyone know how to get in to that menu also i opened up the watch and see a few test points if that could be used i dont mind trying to solder/bodge a usb connection if that would be an option
Cheers in advance
I have posted this in wear os forum too but have had no replies hope someone in here can help.