hi friends
i hav htc touch gsm and now its power button is totally dead, i was starting it from sleep mode with headphone by double pressing its button(just like we do while making calls )now the problem is that the mobile gets turned off now i want to start it is there ne alternate ways to do that ..i visited the service center they said that to recover the problem some hardware must be changed which cost me more than 50% of the moblie price....help me out guys i want to start my phone....
thnx
me too
hi me too facing the same problem did u get any solution for this if there is some way out to shift the function on the camera button maybe i don know.
OP, what did they say needed to be changed on the phone, did you need a new power button switch or something? you could always try and source a replacement one.
If ti is the button that hits the switch is broken, maybe a new case?
go to setting>system>key lock>and select dont lock buttons
when your mob sleeps simply press any button to on the disply
Related
hello everyone, i have the cingular 8525 and i noticed that when i press the green button with the phone logo to open the "phone" application (or to makes calls), it does not work...i dont think its the button itself but an issue with the software. i figured this out because I went to settings and and tried the "buttons" application to try to remap the button to the "phone" application however, i can only (re)configure button 1 (which is messaging) button 2 (which is internet explorer) button 3 (which is comm manager) and button 4 (which is the camera).....and there are no more buttons to reconfigure after that....i know i am suppose to have button 5 and 6 but they dont show anymore... any help would be deeply appreciated...thank you
I have the same prob, but my keyboard have a Italian setting. I think that this prob it's very annoying! Anyone could help us?
ive had that problem
Ive had the same problem, and my front buttons doesnt work, and it was hardware problem, send it to warranty.
hope usefull.
I have HTC TyTN and the same problem with call(green Button) it doesnt work at all.
When I want to enter the phone I press video call button , but could not make cals with green talk button , I should use talk button on screen.
Is there any help with this prob ?
Just fixed that problem.
The button didnt respond to normal presure , pushed it hard and it worked.
Pushed it hard 50 times or more and now it is working.
Probably the button needed some action to start working.
So what happened to "i know i am suppose to have button 5 and 6 but they dont show anymore" ? Oh, you just realized there was NEVER an option to change those buttons ? Ah, okay.
I looked for similar topic but couldn't find it,I can't use power button on my hd anymore,it got broken beacuse of pressing it very often during day to turn the screen on and off...I was wondering if there is an application to assign power button function to home key so when pressing it the screen turns off and on?
Hi, having the same problem, POWER BUTTON is defect/broken, it doesn't have a resistance when I push it in. I can still switch the device on and off, but I have to press the power button hard and the power button does not feel spring loaded any more.
Are there more people having this issue and is there anybody haveing it send for warranty repair already?
Mine is a German O2 device.
Thanks
hit007
Hi Guys,
The Power Button of my HTC P3400i is damaged.
I can always use an application to put device in stand by mode but is there a way to come out of standby mode without power button, probably by changing mapping to any one of the keys....Please help
hello all im having a problem and wish to get some input on what the problem may be
my hd2 has been ****in up to say the least i installed a new miui rom on it after having touchscreen problems and the weird thing is i can get the touch screen to respond after holding the the green call button and the home button for one second making the flashlight turn on then holding the back and end buttons for one second waiting for the screen to turn off then turn back on
my question is does this have something to do with the kernel or power consumption it seems it might be the case but im no expert
what do you think?
Try to press once or twice the endcall (red) button. There is a common problem with the Leo's digitizer and it is located under the endcall button. So press it hard. It used to help me.
I suggest you to install button savior or any app with softkeys to preserve the physical buttons.
Greetz,
Dodi
damn that definitely helped it along
thanks
the problem still exist but at least i can use the phone
alas i think its time to move on
that sucks i really liked my phone
Not responding touch screen
Is the keypad fully connected with the touchscreen? Because my keypad flex cabel is broken, and my digitizer doesn't respond. Do i need to buy a new digitezer or just flex cabel? Can somebody help me? Thanks
i haven't checked the good thing is i have a spare digitizer but its a hassle still ill probably end up trying eventually
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Luka keko said:
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Click to expand...
Click to collapse
Hello there, I'm from Brazil, as my english may not be the best lol... So I have same phone as you and similar problem... The problem is that volume down doesn't work. Other buttons work fine though. Also, the phone always enters in safe mode, so I assumed the volume down button is being pressed all the time. Except that, I realized that I could enter in download mode (I tested, if I don't press volume down in the combo 'power button + home + volume down' it won't get into download) and if I press volume down to cancel it will actually cancel and restart the phone. So the button is working... Here is the part where I think the problem is similar. There was a time I turned the phone off, through the system as we normally do, and then it wouldn't turn on again. I realized it was actually turning on, but the screen was black. I tried entering download mode and tested on odin and it actually had entered download mode, but the screen was black... Then after several attempts it finally got back on again... So I think there is something related with the button circuit with the lcd, I don't know. I would like to know if you got to any solution there. I guess that instead of bringing you any solution I'm bringing another problem lol. Well if I have any other information I will post it here. Best wishes.