Related
Hello,
I was on the 7.0 nougat recovery, but i had to abort because the 7.0 update.zip doesn't exist anymore on the hicloud servers.
Well, then i was on Android 4.3 for some reason and now i tried to flash the 6.0 Meticulus TWRP, but it simply won't boot.
Sometimes i come in some EMUI Loading Screen which aborts at 5% and says "Update package does not exist".
For some reason i still can boot into the 7.0 Recovery when i flash that, but i can't even format or access my data partition.
I tried to install a 6.0 custom rom (RevolutionRom) in there but it won't boot, i think because i can't format the /data partition.
Please help me guys
best regards
7.0 still exists on Huawei server,bu If you want to downgrade, do these:
Extract stock recovery from 7.0 update.app
flash stock recovery.
Put 6.0 update.app in SD card, then press volume up + volume down + power to flash.
Press volume up + power to do a factory reset.
rann77 said:
7.0 still exists on Huawei server,bu If you want to downgrade, do these:
Extract stock recovery from 7.0 update.app
flash stock recovery.
Put 6.0 update.app in SD card, then press volume up + volume down + power to flash.
Press volume up + power to do a factory reset.
Click to expand...
Click to collapse
Hey, thanks for your reply!
We managed to solve this problem, we put the stock update.app in the dload folder on a external sd card, then it reflashed the whole system.
After that it still didn't booted, but then we unlocked the bootloader a second time (to wipe the storage, still had no access to recovery at that moment) and voila, it boots and its ready to use with 6.0 again! TWRP by Meticulus also works.
We had some problems with 7.0, but nevermind. It runs fine now with 6.0! The phone is a christmas present for my sister-in-law from my brother though
It's a little bit complicated on your huawei phones
But its a very solid made phone for its price and the performance is also very good imho, and i say that as a Oneplus3 User
best regards and stay well guys
Sent from my OnePlus 3 using XDA Labs
Hi,
So I have created this thread just because I can see many people creating new threads as after flashing CM 14.1, their phone doesn't boot up. So for all those who are going to flash CM 14.1 or have already flashed it and can't get it working, this thread is for you.
What you will need:
1. Rooted OnePlus X (Obviously)
2. Custom Recovery (TWRP recommended)
3. Latest CM 14.1 build
4. Arsenic Kernel or BlackReactor Kernel
So this is how you get CM 14.1 working on your OPX (make sure your battery is above 80% just to be sure that nothing will go wrong considering battery's point of view)
Make sure you have backed up everything before performing the following steps as the process will wipe your data completely. (I would recommend to take a Titanium backup of all user apps and then taking a nandroid backup of system and data)
1. Download the required files and place them in your SD Card or internal storage
2. Reboot your device into recovery
3. Go to wipe, and swipe to factory reset (Note! This will completely wipe all the data from your device including app data and SMS! This won't wipe the contacts but just to be safe, have a backup of all your contacts)
4. Go to Wipe again, and go to Advanced wipe, select the following partitions - System, Cache, Dalvik cache. Swipe to wipe (Note! Make sure you have a backup of the System as this will wipe the Operating System from your phone!) Although this step isn't necessary, I like to do it.
5. Go to install, and direct to the location where you have saved the CM 14.1 zip file and the kernel. Select the files, and swipe to flash.
6. If you want anything else in your system, direct to that location, select the zip file, and swipe to flash. (Note! You need not flash the SuperSU zip file as CM offers Root access in developer options)
7. Reboot your system and wait for it to boot.
Viola! Your device is now running official CM 14.1 nightly.
Hope this helps! ?
Downloads:
1. Latest CyanogenMod nightly - found here https://download.cyanogenmod.org/?device=onyx
You can have any version of the nightly as long as it is CM 14.1
2. Arsenic Kernel R32 (or R31) - http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Open the above thread and follow the guide
OR
Black Reactor kernel v1.0 - http://forum.xda-developers.com/oneplus-x/development/kernel-blackreactor-kernel-oneplus-x-t3460989
-Reserved-
Good Evening, @aamodjoshi23 THX a Lot. You are my Hero. Finally it works.
greetings
If you're facing some Error 7 while trying to flash cm 14.1, you can try updating the bootloader following this
http://forum.xda-developers.com/showpost.php?p=69267239&postcount=2560
I used the Oxygen OS 3.13 full ROM as recommended, edited updater-script (following those instructions)
Immediately after flashing the OOS 3.13 rom, you don't have to reboot.
I immediately flashed twrp 3.0.3 original from https://dl.twrp.me/onyx/
I then rebooted into twrp 3.0.3 (using the reboot button in twrp, then bootloader)
Then I installed (in this order):
cm 14.1 (https://download.cyanogenmod.org/?device=onyx)
arsenic kernel (as recommended above)
opengapps
Not sure if this step is necessary, but I wanted to let twrp patch the rom to not overwrite twrp so I rebooted into twrp again (using reboot --> bootloader in twrp)
Then I used reboot --> system
First boot took a while, but now I have nougat!!
kenel zip every time
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
allons-y said:
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
Click to expand...
Click to collapse
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
aamodjoshi23 said:
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
Click to expand...
Click to collapse
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
shashanksachdeva said:
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
Click to expand...
Click to collapse
First of all we need more info about your current ROM recovery etc.
Fap4k said:
First of all we need more info about your current ROM recovery etc.
Click to expand...
Click to collapse
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
shashanksachdeva said:
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
Click to expand...
Click to collapse
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Fap4k said:
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
This is because you flashed wrong recovery twrp 3.0.3 is for new bootloader and you are on old bootloader..that's why it all happened..so you just need to flash old recovery..then follow given link to upgrade bootloader and recovery.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
I've got a good news and bad news for you.
The bad news is, no one has the older 2.8.x TWRP image files and there are no threads that have the download links for the older version of TWRP. So you're stuck and you have lost your recovery. You have lost everything... Having no recovery means you can't do a lot of things like factory reset, any wipe of a partition, you won't be able to update your system, you won't be able to flash zip files to enhance your experience and many more... I'm sorry my friend...
The good news is, I've got you covered. I had saved the older TWRP so that if anyone one day would need that recovery image, I would be able to help them.
Download the older TWRP from here : https://drive.google.com/file/d/0B2Ms-zaNd3SiTmpxX0UtYUV2R1k/view?usp=drivesdk
Flash it. You should get back your recovery.
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Fap4k said:
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Click to expand...
Click to collapse
using resurrection remix marshmallow 6.0...
Plush suthar said:
using resurrection remix marshmallow 6.0...
Click to expand...
Click to collapse
Did you ever updated bootloader?
If not than update your bootloader and install latest recovery!!
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
By stuck on boot, I didn't know you meant that it showed only the OnePlus logo and not even powered by Android.
In that case, follow this guide to update your bootloader :
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
I'm having a very difficult time getting this phone setup. I can get very, very close... but then it starts boot looping into recovery.
So starting at the beginning, here is what I did:
- Booted up phone, make sure it works and connects to wifi (I find out later that it got encrypted, even though I didn't set a PIN).
- Inside the OS on first boot, I install and use the official bootloader unlock APK from Asus.
- Rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the Oreo modem, current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After many attempts to decrypt (and a lot of help from the forum), I successfully restore the phone to "WW_ZE552KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw.zip" with the Asus tool.
- Phone is fixed and booting again to the OS, but I'm back to square one.
Second attempt:
- Thinking I need to flash the raw Oreo ROM (instead of just the Oreo modem), I use the Asus tool to flash "WW_ZE552KL_15.0410.1803.55_M3.10.47.19_Phone-user.raw.zip"
- The phone works fine and is now an Oreo ROM with an Oreo modem
- It's still unlocked, so I rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After the reboot, it goes to TWRP... whether I just let it boot on its own, or press power when it says: Start - Continue to boot >
What am I doing wrong?
You're having a rough go at this one eh.
I know we talked about this before, but did you try a factory reset and wiping cache/dalvik before rebooting?
Yes. As we discussed before, you can't wipe cache from TWRP. So I'd wipe dalvik from TWRP, then reboot to the bootloader to do a "fastboot format cache".
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Flapjack said:
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Click to expand...
Click to collapse
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
junglesnake said:
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
Click to expand...
Click to collapse
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
BootloaderBoi said:
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
Click to expand...
Click to collapse
many many thanks! I was able to get Ressurection Remix working by now
your steps were right, and I will detail them better to tell how I made it work for others reading this thread:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website.
1.2 - I also had to find a recent recovery.img, which I think I got it from here https://forum.xda-developers.com/zenfone-3/how-to/original-recovery-img-boot-img-zenfone-t3572188
1.3 - I used the stock recovery's adb sideload to flash the stock ROM
2) Flash TWRP - all good here
3) Flash ROM, Magisk, GApps
3.1 - I wiped system, data, cache and dalvik.
3.2 - I flashed RR ROM, GApps and Magisk (EDIT 2: install all three before the first custom ROM boot, or GApps won't work)
3.3 - Performed a Factory Reset
4) REBOOTED TO GLORY!
For what it seems, the stock ROM encryption that is performed on the stock's first boot was the enemy.
Now one last thing... In Security -> Encription, my device is NOT encrypted.
Do I run the risk of ruining everything if I encrypt it?
EDIT: No, it didn't break, working fine
junglesnake said:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website
Click to expand...
Click to collapse
lmao. His RAW firmware version is the latest version though
https://forum.xda-developers.com/zenfone-3/development/updated-unlock-relock-bootloader-t3749456
Anyways, enjoy your phone running on custom ROM :good:
Hello A2 users
If you convert your Mi A2 to Mi 6X (Android One to MIUI) the updater in MIUI by xiaomi.eu will install Xiaomi ARB (Anit Rollback protection) and you will stuck in MIUI if ARB is installed, for update MIUI without install ARB you need use TWRP and I already delete firmware-update folder for delete ARB from the MIUI update.
1 - Download TWRP.zip and the MIUI update
2 - Reboot your phone in fastboot and connect your phone at your PC
3 - Extract TWRP folder from TWRP.zip
4 - Launch Flash_TWRP.bat (It's will install TWRP and boot in TWRP)
5 - Put the MIUI update in your phone (MTP is already enabled)
6 - Go to wipe > Advanced wipe > select Dalvik's/ART cache and cache and swipe to wipe
7 - Go to Install and select the MIUI update and swipe to confirm to flash
8 - Reboot system and MIUI update is installed
Photo Guide for Install MIUI update in TWRP : https://photos.google.com/album/AF1QipNsuQZv1ZX0sahYwRWpPUEN77o0djhSkLPnKamp
Thanks to @Abdoubody for [MIUI 10][A2] Install Guide
Nice one dude. Can you also put a guide if someone like me from a Custom ROM with TWRP Recovery installed can flash MIUI on Mi A2 device thanks dude and more power!
Any news???
MaxImbrox said:
Any news???
Click to expand...
Click to collapse
Guide is done
Thanks dude!
i did the flashing correctly but now um stuck on boot loop, the device does not start and stuck on MI logo and reboots into TWRP every time.
Update : i have wiped the delvic, cash and data in TWRP to get rid of the boot loop and worked
Hello together,
after 3 Days of reading and searching and testing solutions, I have to ask you if you can solve my problem.
I can't find the reason by myself, because I'm new with this topic. I want to install a Custom ROM on my Huawei P 8 Lite Alice from 2015, but everytime I flash any Custom ROM which should match, it ends in a bootloop (huawei logo, then logo custom rom, then huawei logo etc....).
My device:
Huawei P8 Lite ALE L21 from 2015 - Alice
Built number before start this "project": ALE-L21C432B634
Android 6
Emui 4.0.3
Bootloader unlocked with code generated by dc-unlocker
No Root
My prefered Custom ROM is Lineage OS 14.1 and I tried to flash it following the steps in this thread:
[url]https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247[/URL]
1. step - Flash TWRP
First Problem was to install the TWRP 3.1.1 linked in this thread:
[url]https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180[/url][/URL]
To flash the TWRP image with adb caused no problem. When I boot into recovery, TWRP starts, but when I touch anything on the screen (like swipe to unlock) the System boots (With OS installed it boots the OS and without it stucks at huawei logo). Booting again into TWRP is no Problem.
I solved this problem with a TWRP image 3.1.0-1 from this forum:
[url]https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-p8-lite.2476/huawei-p8lite-neues-inoffizielles-twrp-3-1-0-1-von-surdu_petru-xda.826139.html[/URL]
The thread references on the same XDA thread mentioned above, but it is linked to another version of TWRP image. This Version 3.1.0-1 is working good.
2. step - flash EMUI 4.1
I flashed the EMUI Update B896 with TWRP. In the thread to the Lineage OS 14.1 mentioned above, it is described that you need this update. I used the linked .zip.
Steps:
1. Wipe Data, internal storage, system, Dalvik Cache, Cache (all except micro sd card).
2. Format Data
3. Reboot into TWRP
4. flash .zip from SD card
5. Wipe Davlik Cache and Cache
5. Reboot System
After that :
Android 6
Build number: ALE B896
EMUI: 4.1
The updated ROM works good.
3. Step - Flash Lineage OS 14.1
Steps:
1. Wipe Data, internal storage, system, Dalvik Cache, Cache (all except micro sd card).
2. Format Data
3. Reboot into TWRP
4. flash .zip from SD card
5. Wipe Davlik Cache and Cache
5. Reboot System
Result Boot Loop :victory:
Trouble shooting:
I tried to install different TWRP versions, but only the TWRP 3.1.0-1 works.
I useb adb sideload to flash the Lineage
I flashed the EMUI 4.03. I had before and than Lineage 14.1 (EMUI works, but Lineage doesn't)
I wiped dalvik cache and data, cache after flashing Lineage, to fix the bootloop
I flashed versions of Lineage OS 14.1 from different dates and different download websites
I flashed different Custom ROMS - all the same Problem except Lineage 13.0. Lineage 13.0 boots till it is ready to "preparing" apps and than boots again.
Now I don't know what do do and would be very thankful to get some new ideas to try or perhaps a solution
Thank you! :highfive:
The ROM needs Emui 4.1 B895/B896 update to be installed first
Then unlock bootloader, flash twrp then flash ROM
Thank you for your help. I'll try this. So I have to lock bootloader again first?
No. You flash the update with twrp
Go to step 6 in the first post on this thread
https://forum.xda-developers.com/p8lite/general/guide-unlock-bootloader-root-device-t3977067
Keran_3066 said:
No. You flash the update with twrp
Go to step 6 in the first post on this thread
https://forum.xda-developers.com/p8lite/general/guide-unlock-bootloader-root-device-t3977067
Click to expand...
Click to collapse
Maybe I described it not so good in my first post but I think I did it already exactly like that.
1. Unlock bootloader
2. Flash TWRP
3. Flash Emui 4.1 update B896 ( its working on my phone now)
4. Flash TWRP again
5. Flash Custom Rom ( evertime the result is a bootloop)
Or did I overlook anything?
Sorry I didn't read that part where you flashed emui 4.1
Lineage os 14.1 works for me.
Did you try Resurrection Remix OS
https://forum.xda-developers.com/p8lite/development/rom-t3606568
Keran_3066 said:
Sorry I didn't read that part where you flashed emui 4.1
Lineage os 14.1 works for me.
Did you try Resurrection Remix OS
https://forum.xda-developers.com/p8lite/development/rom-t3606568
Click to expand...
Click to collapse
Thank you very much, that you tried to help me Im happy about all suggestions.
Yes I tried RR and Paranoid, but its the same Problem. I'm wondering that the EMUI Roms which are not officially from Huawei work and any custom rom does not. Maybe there is a Problem with the structure of my system but I dont know anything about this stuff and how to find out the reason for my Problem:laugh:
Maybe you know a command for adb or android terminal app to check if everything is ok?
Jaba Wup said:
Maybe you know a command for adb or android terminal app to check if everything is ok?
Click to expand...
Click to collapse
I'm kinda out of ideas
Keran_3066 said:
I'm kinda out of ideas
Click to expand...
Click to collapse
I feel like you:laugh: thanks and have a nice evening:good: