Database Users

Cant install LineageOS 14.1 on G2 D802 (TWRP deletes root)

Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS

Quicka said:
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Click to expand...
Click to collapse
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.

Jan Philipp said:
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Click to expand...
Click to collapse
i have done it... but after i wiped data,... etc. flashed lineage os and gapps and reboot system, phone screen gets black... and i can only go to download mode to flash again stock rom ive tried it about 5 times

Problem fixed
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec

Quicka said:
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Click to expand...
Click to collapse
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?

djsasha78 said:
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
Click to expand...
Click to collapse
just held the volume up button and then connected with pc. then using lg flash tool to flash lollipop stock rom

1. Root + TWRP : https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Update TWRP to 3.1 by flashing zip file and then rebooting recovery: http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. LineageOS by flashing rom zip file and gapps: https://download.lineageos.org/d802 + http://opengapps.org/ (ARM + Android 7.1)
easiest method to flash lineageOS on LG G2 https://www.youtube.com/watch?v=BoPjGM0nrak (Video tutorial)

Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?

JackSparreau said:
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
Click to expand...
Click to collapse
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.

cropsroth said:
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
Click to expand...
Click to collapse
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks

JackSparreau said:
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
Click to expand...
Click to collapse
Yes, you don't wipe after flash, but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. Check MD5 of the all files you downloaded with original MD5 to confirm the file didn't get corrupt.
Boot stack flash not needed. Please read the first post thoroughly in lineage thread
"""
Requirements:
Custom recovery (TWRP or any other)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 13 (no dirty flash, wipe system too check you bootstack(needen bump support)
"""

crophs said:
... but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. ...
Click to expand...
Click to collapse
Hi,
what do you mean by "you swipe the factory reset", I'm not sure what it is, either "give it a clean shot again".
Sorry I'm not very aware of all those processes ^_^, and I'm french so not very aware of some vocabulary words
Thank you

Stuck in bootloop in all LOS and OOS based roms

Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?

Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.

Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.

I have now also tried flashing the stock boot.img, but no difference.

I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work

"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?

After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.

Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.

If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead

It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?

Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far

You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.

https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?

I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578

Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP

Yeah, I tried with Gapps, and I never rooted before first trying to boot.

As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%

Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation

Bump. I am also stuck in this state

Oneplus2 Stuck on Animation

I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.

Make sure everything is formatted as ext4 and update firmware to 3.6.1 just to rule it out.
I would use the latest twrp.
I go to format tick all the boxes and clear everything then go to reboot > recovery. Once back in twrp copy the ROM and gapps across from pc install ROM and gapps together, wipe cache and dalvik reboot.

I'm in the process of doing that now.
The TWRP that I'm using is 3.1.1-0 which looks to be the latest. I am working with OOS 3.5.8 but will look at downloading 3.6.1. I am working to get Lineage 14.1 on there once everything is stable.
I ran into another weird is when using the qualcomm recovery tool:
My method is to enable ADB, enable OEM Unlock, enable Advanced Reboot.
Reboot into fastboot
Fastboot oem unlock: is successful
Fastboot reboot
I then go through renabling ADB and Advanced Reboot, OEM Unlock is still enabled.
I then reboot into fastboot
Fastboot flash recovery twrp-3.1.1-0-oneplus2.img
This completes successfully and then I fastboot reboot.
I have tried several times to get into TWRP but I keep getting the stock recovery.
I have tried to reflash recovery but nothing ever changes.
Is there possibly something wrong with the OEM unlock that says it was successful?
How do I go about troubleshooting this?

Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.

cyrus104 said:
Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.
Click to expand...
Click to collapse
Internal doesn't really matter to be honest, did you check they data and system are formatted as ext4.
It is in twrp advanced wipe options.
Did it ever boot ?

I did doubt check the data and system are formatted as ext4.
I let it sit for 3-4 hours and didn't see any progress.

Try a different rom. There are a lot of lineage based roms around.

I tried that and am getting the same results. Even if I flash a full TWRP backup from a time when I had it known to be working it happens.

I've tested this with 3 different roms now. My latest attempt has been to update TWRP to 3.2.1 and then install lineage 14.1 20171208. I also tested with Paranoid and Carbon because they were near the top of my list not because I know anything about them.
The phone just never gets past the boot animation. If I reboot to recovery is there a log I can pull to see what the issue is?
Thanks

Would like to see if anyone has any thoughts. If I run OOS I can use the phone but as of right now I can't use any other rom.
Is there any advanced fastboot or wipes that can be done to get it to boot. Is there any type of debugging that will show me what's happening when it tries to boot.

Just trying to bump this, I really need a way to debug this problem. Besides running OOS, I have a feeling this device is bricked and the mega unbrick guide doesn't work.
Also looks like if I try to put Kali on top of the base 3.5.8, the phone goes into the animation loop. So any change after OOS on the device puts it into an animation loop.
Is there a way the system or boot locked? Even thought I can TWRP anything onto the phone without errors.

Hey!
I've got the same issue it seems, phone just sticks to boot animation when flashing any other ROM than OOS 3.6.1.
Any update?
EDIT :
problem was with the persist.img
Flashed a different firm file and it was resolved

cyrus104 said:
I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.
Click to expand...
Click to collapse
OOS does not refuse to boot if a mountable partition is corrupt. This is not the case with lineage. If a mountable partition is corrupt and the corresponding fstab entry does not allow lineage to format and somehow mount it then init never proceeds
Try flashing this file: https://glassrom.botstack.host/firmware/oos-3.6.1-firmware-signed.zip and try again
Note that this file reboots the device after the flash is done so don't use twrp queue to flash this file. Flash this file last
---------- Post added at 17:45 ---------- Previous post was at 17:34 ----------
Alternatively this is a method I don't recommend to beginners because they accidentally give twrp logs to devs without realising it
You can get logs by making the forcing the device to "crash" through the power button
Here's how it's done: you boot the non-booting ROM and wait for about a minute. Then press power + volume down while it's on the bootanimation. You have to hold it until you see the oneplus logo and boot to twrp
TWRP's kernel will recover the last booted kernel's log from ram and place it in /sys/fs/pstore
First you have to open the log yourself to check if it's valid. The file is console-ramoops-0. All other log files in that location are invalid for your specific issue
Now for an ordinary user this is hard. They can't tell if the log is a recovery log or a ROM log. Since we're dealing with official lineageos we assume selinux would be enforcing
You want to search for this string "permissive=1". On Linux just do cat console-ramoops-0 | grep "audit" (quotes are part of the command)
If you're on windows then you can download Linux and get the logs. Stop bothering me
If you see the string "permissive=1" in the log you have accidentally fetched a recovery log
Go back and boot again and wait for about a minute if selinux is permissive
The string should read
"permissive=0"
That means selinux is enforcing and this is indeed a ROM log
Send this log here

Hello,
Was this problem ever solved? I am experiencing the very same thing with every single ROM i have tried so far. TWRP is installed, I can install all ROMS but when I try to boot the phone, it just won't get passed the booting animation.
Thank you

Can't get custom ROM installed

I'm having a very difficult time getting this phone setup. I can get very, very close... but then it starts boot looping into recovery.
So starting at the beginning, here is what I did:
- Booted up phone, make sure it works and connects to wifi (I find out later that it got encrypted, even though I didn't set a PIN).
- Inside the OS on first boot, I install and use the official bootloader unlock APK from Asus.
- Rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the Oreo modem, current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After many attempts to decrypt (and a lot of help from the forum), I successfully restore the phone to "WW_ZE552KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw.zip" with the Asus tool.
- Phone is fixed and booting again to the OS, but I'm back to square one.
Second attempt:
- Thinking I need to flash the raw Oreo ROM (instead of just the Oreo modem), I use the Asus tool to flash "WW_ZE552KL_15.0410.1803.55_M3.10.47.19_Phone-user.raw.zip"
- The phone works fine and is now an Oreo ROM with an Oreo modem
- It's still unlocked, so I rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After the reboot, it goes to TWRP... whether I just let it boot on its own, or press power when it says: Start - Continue to boot >
What am I doing wrong?

You're having a rough go at this one eh.
I know we talked about this before, but did you try a factory reset and wiping cache/dalvik before rebooting?

Yes. As we discussed before, you can't wipe cache from TWRP. So I'd wipe dalvik from TWRP, then reboot to the bootloader to do a "fastboot format cache".

I'm going to try a different ROM later this afternoon. Maybe that will make a difference.

Flapjack said:
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Click to expand...
Click to collapse
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.

junglesnake said:
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
Click to expand...
Click to collapse
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.

BootloaderBoi said:
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
Click to expand...
Click to collapse
many many thanks! I was able to get Ressurection Remix working by now
your steps were right, and I will detail them better to tell how I made it work for others reading this thread:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website.
1.2 - I also had to find a recent recovery.img, which I think I got it from here https://forum.xda-developers.com/zenfone-3/how-to/original-recovery-img-boot-img-zenfone-t3572188
1.3 - I used the stock recovery's adb sideload to flash the stock ROM
2) Flash TWRP - all good here
3) Flash ROM, Magisk, GApps
3.1 - I wiped system, data, cache and dalvik.
3.2 - I flashed RR ROM, GApps and Magisk (EDIT 2: install all three before the first custom ROM boot, or GApps won't work)
3.3 - Performed a Factory Reset
4) REBOOTED TO GLORY!
For what it seems, the stock ROM encryption that is performed on the stock's first boot was the enemy.
Now one last thing... In Security -> Encription, my device is NOT encrypted.
Do I run the risk of ruining everything if I encrypt it?
EDIT: No, it didn't break, working fine

junglesnake said:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website
Click to expand...
Click to collapse
lmao. His RAW firmware version is the latest version though
https://forum.xda-developers.com/zenfone-3/development/updated-unlock-relock-bootloader-t3749456
Anyways, enjoy your phone running on custom ROM :good:

flashing firmware zip fails every time

I am currently using a OnePlus 5 which used to run on a stock based rom, xxxNoLimits v3.1
Since the dev ended the support I wanted to revert back to pure OOS, so I downlaoded the newest 5.1.5 zip and followed the instructions using the newest blu_spark twrp recovery but right after pressing the "flash" button I kept getting error 7, so I download the zip from a mirror link and I have also tried the newest version of codeworkx twrp, still error 7. Then I tried flashing the original stock recovery in order to flash the zip but it instantly threw me back to the zip selection menu, flashing the zip via adb sideload kept quitting at exactly 47%. At this point I was pretty frustrated, I flashed twrp codeworkx again and wiped EVERYTHING, which includes the system, data, cache, dalvik partitions and then I also did a format on the data partition, the point was that now I would have a clean phone only running twrp and I thought I could easily flash the newest zip now without any problems, NOPE, still error 7!!! Now I am stuck here, the stock recovery doesnt let me flash anything and I've tried 4 different versions of twrp recoverys and every single one gives me the same error, I even dug up an older version of OOS, I think it which I had running for a few weeks without any probles so I knew that the zip was not corrupted but same error
Now I had given up and wanted to restore the backup I did just in case anything goes wrong, well, restoring the backup fails when it tries to restore the data partition, so I unchecked everything except system, system image and recovery but it didnt work, now I am sitting here with my phone telling me that there's no OS installed. any advice?

Use Unbrick Tool and Restore
Hey,
You can Flash your Mobile using the Unbrick tool at - https://androidfilehost.com/?w=files&flid=204903
Use the Latest file which I guess comes with OOS 5.1.3 - https://androidfilehost.com/?fid=962339331458999196
If you try to Go to Open Beta ROM First Flash Open Beta 12--> Open Beta 13 --> Open Beta 17

freaky2xd said:
I am currently using a OnePlus 5 which used to run on a stock based rom, xxxNoLimits v3.1
Since the dev ended the support I wanted to revert back to pure OOS, so I downlaoded the newest 5.1.5 zip and followed the instructions using the newest blu_spark twrp recovery but right after pressing the "flash" button I kept getting error 7, so I download the zip from a mirror link and I have also tried the newest version of codeworkx twrp, still error 7. Then I tried flashing the original stock recovery in order to flash the zip but it instantly threw me back to the zip selection menu, flashing the zip via adb sideload kept quitting at exactly 47%. At this point I was pretty frustrated, I flashed twrp codeworkx again and wiped EVERYTHING, which includes the system, data, cache, dalvik partitions and then I also did a format on the data partition, the point was that now I would have a clean phone only running twrp and I thought I could easily flash the newest zip now without any problems, NOPE, still error 7!!! Now I am stuck here, the stock recovery doesnt let me flash anything and I've tried 4 different versions of twrp recoverys and every single one gives me the same error, I even dug up an older version of OOS, I think it which I had running for a few weeks without any probles so I knew that the zip was not corrupted but same error
Now I had given up and wanted to restore the backup I did just in case anything goes wrong, well, restoring the backup fails when it tries to restore the data partition, so I unchecked everything except system, system image and recovery but it didnt work, now I am sitting here with my phone telling me that there's no OS installed. any advice?
Click to expand...
Click to collapse
Flashing newest oos doesn't always work l have had this sometime l have had to go back 3 oos versions then flash them in order to flash the latest release.

freaky2xd said:
I am currently using a OnePlus 5 which used to run on a stock based rom, xxxNoLimits v3.1
Since the dev ended the support I wanted to revert back to pure OOS, so I downlaoded the newest 5.1.5 zip and followed the instructions using the newest blu_spark twrp recovery but right after pressing the "flash" button I kept getting error 7, so I download the zip from a mirror link and I have also tried the newest version of codeworkx twrp, still error 7. Then I tried flashing the original stock recovery in order to flash the zip but it instantly threw me back to the zip selection menu, flashing the zip via adb sideload kept quitting at exactly 47%. At this point I was pretty frustrated, I flashed twrp codeworkx again and wiped EVERYTHING, which includes the system, data, cache, dalvik partitions and then I also did a format on the data partition, the point was that now I would have a clean phone only running twrp and I thought I could easily flash the newest zip now without any problems, NOPE, still error 7!!! Now I am stuck here, the stock recovery doesnt let me flash anything and I've tried 4 different versions of twrp recoverys and every single one gives me the same error, I even dug up an older version of OOS, I think it which I had running for a few weeks without any probles so I knew that the zip was not corrupted but same error
Now I had given up and wanted to restore the backup I did just in case anything goes wrong, well, restoring the backup fails when it tries to restore the data partition, so I unchecked everything except system, system image and recovery but it didnt work, now I am sitting here with my phone telling me that there's no OS installed. any advice?
Click to expand...
Click to collapse
Hi ! Do you have some news about it ? I have the same issue since Monday...
I've tried like anything i've found and even more, but nothing did the job ...
The only way to have my OP5 working is downgrade to an old version running Android 7.1.1