My a 500 went into apx mode on its own about 4 months ago. I have searched and searched for a way to get it out. Please help! It is not modded in any way, completely stock. I do not have the cuid. I simply want to use my tablet again. It is black screen no vibration. The power button lights up when turned on and it charges. It will not reset with the reset button and a hard reset does nothing. ... No response. I have tried afterotas unsoftbrick and it simply hangs at flashing recovery. If anyone has suggestions I would be quite grateful. Thanks in advance.
beautygirlhaley said:
My a 500 went into apx mode on its own about 4 months ago. I have searched and searched for a way to get it out. Please help! It is not modded in any way, completely stock. I do not have the cuid. I simply want to use my tablet again. It is black screen no vibration. The power button lights up when turned on and it charges. It will not reset with the reset button and a hard reset does nothing. ... No response. I have tried afterotas unsoftbrick and it simply hangs at flashing recovery. If anyone has suggestions I would be quite grateful. Thanks in advance.
Click to expand...
Click to collapse
You could try reflashing an EUU. (Can't remember for sure, but, don't think you need your CPUID to flash an EUU.
If your tab has ever been plugged into your USB port, you can use USBDEVIEW to find you CPUID, or just search for CPUID, and you will find many different ways to recover it.
I have been stuck in APX Mode several times where it seemed nothing could help. All posted fixes seemed to fail. Then I tried babsector, (I believe a mis-spelling on bad sector) and everything was good again. (I could flash EUU's, ROM's, etc.) Difference maybe though, I caused my tab to go into APX, by errors in flashing, (If I remember correctly, I tried flashing a new ROM on an unrooted tablet, and the result was APX.) This may or may not help you, but, nothing to lose, right.
Alright, so I've got an LG E617G from Bell Aliant, a mobile carrier in Canada. I know it's rooted and it's the most up-to-date OS I could possibly get for this phone, stock, but I can't check the OS at the moment, or at least in a way I know of. I went to reset the phone to factory default settings and it gets stuck in this boot loop. I shut down, boot it back up. Now the boot screen sound doesn't finish properly and it just is stuck in a loop.
I tried to do a hard reset/forced recovery mode thing (Volume Down + Power then go to holding Home only when the LED on the bottom of the screen light up) and that didn't work. Same broken sound and stuck loop. Thinking that the charge might have something to do with it (It was at about 7% when I tried to do the initial reset. Stupid, I know, but I was drunk).
I just tried to do the same hard reset/forced recovery mode thing and that didn't work, same boot screen problem. I searched on the forums here as well as online and the only information that I've gotten is that the L5 is the closest well known representation of the LG E617g so I'm hoping you guys can help.
It should also be known, I did give ES File Explorer root access the day prior to the reset in an attempt to change the actual font. That didn't work so I tried 2 different applications that I found information on. iFont and Font Installer. I tried something with Font Installer and it didn't work so I installed iFont (without uninstalling Font Installer) and installed a font there. That didn't seem to work so I just ignored it. Then I noticed that the font had changed but only on Facebook apps. This was why I wanted to do the reset, to get rid of this font nonsense. Now I think I may have just ****ed it all up.
Any help would be greatly appreciated. Ask what you need of me, if you do need anything, and tell me a quick way of possibly finding that information or linking to a tutorial how and I will get back to you ASAP. Thank you for the patience and help guys.
********
I have since solved the problem. I downloaded and installed all drivers again, ran the LG Mobile Support Tool and on the top menu bar I went Customer Support > Recovery and put my IMEI in and hit check. Got my info and another pop up came up. Downloaded the data for my phone (I had to run it in Download mode. I took out battery, held up and down volume while plugging it in the PC, run this recovery mode. I'd fail the recovery mode but then I'd just run the program part again on the computer while keeping it in plugged in.) and installed it. Worked fine after that.
Thanks a lot for this detailed solution!
need4steer said:
Thanks a lot for this detailed solution!
Click to expand...
Click to collapse
Ah, no problem. I spend most of my time looking at forums that talk about my exact problem but never a solution. Just wanted to make sure that if anyone ends up with my problem that my fix worked.
so i follow the steps and flash using qpst and got the aws unlocked on my phone. ive used the phone all day with no problems and great internet speed, now that night my phone died and when i restarted my phone i noticed it would get stuck on the s4 welcome screen and pause. ive tried pulling the battery and getting into recovery but it just reads recovery booting so i got the phone into download mode, downloaded the stock firmware and flashed using odin. it says successful but when i restart phone wala im back to the same problem. now the phone was never rooted and ive tried flashing stock kernels, stock firmware nothing. ive been up two days reading post after post and no matter what i read and tried i cannot prevail. i could use odin off the compo if that helps so maybe all i need are all stock files? the firmwares ive tried havent changed so if anybody could help would be greatly appreciated
cliffs.
enable aws bands
phone works fine till battery died
cant get to recovery booting but can get into odin mode
already tried flashing stock firmware and kernel
o M O N O o said:
so i follow the steps and flash using qpst and got the aws unlocked on my phone. ive used the phone all day with no problems and great internet speed, now that night my phone died and when i restarted my phone i noticed it would get stuck on the s4 welcome screen and pause. ive tried pulling the battery and getting into recovery but it just reads recovery booting so i got the phone into download mode, downloaded the stock firmware and flashed using odin. it says successful but when i restart phone wala im back to the same problem. now the phone was never rooted and ive tried flashing stock kernels, stock firmware nothing. ive been up two days reading post after post and no matter what i read and tried i cannot prevail. i could use odin off the compo if that helps so maybe all i need are all stock files? the firmwares ive tried havent changed so if anybody could help would be greatly appreciated
cliffs.
enable aws bands
phone works fine till battery died
cant get to recovery booting but can get into odin mode
already tried flashing stock firmware and kernel
Click to expand...
Click to collapse
You could try taking out your SIM and SD card and start your phone that way to see if it boots.
Leave your battery out for 30s and try again without your SIM and SD in there.
You could also download Samsung Kies and try to connect your phone to see if there is a chance the software will see your phone is connected. And from the Tools option try the emergency options.
sorry to be more specific the phone will turn on and stay at the white galaxy s4 screen, i could boot up in odin mode and flashed the original firmware but that doesnt do it. i could vol+ and power button but cant access recovery the blue letters stay lit top left. i could access dl mode with vol- though. ive read thru numerous threads but they all seem to be rooted i am not, all i did wasflash the t-mobile aws bands with qpst.
No one tried to flash only recovery for Odin.
Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MegaGalan said:
No one tried to flash only recovery for Odin.
Click to expand...
Click to collapse
after following the guide to enable the aws bands my phone was working till the battery died now after that the phone stays stuck at the first startup screen and there is no recovery with VOL+ and power button. basically trying to ask what could be done, i tried stock firmware with odin and have tried with kies with the end result being stuck on first galaxy screen with no option to factory reset
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
didscub said:
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
Click to expand...
Click to collapse
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Cryceratops said:
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Click to expand...
Click to collapse
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
didscub said:
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
Click to expand...
Click to collapse
Did you try the one I linked to you or a different one?
Cryceratops said:
Did you try the one I linked to you or a different one?
Click to expand...
Click to collapse
Only just saw that - I didnt - thank you.
I will try now but may take a while to get back to you while I wait to download.
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
*Detection* said:
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
Click to expand...
Click to collapse
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
didscub said:
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
Click to expand...
Click to collapse
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
*Detection* said:
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Click to expand...
Click to collapse
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
didscub said:
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
Click to expand...
Click to collapse
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
didscub said:
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
Click to expand...
Click to collapse
BOJ1 yea, same one
Try different versions of ODIN, 3.09 up to 3.10.7 (Maybe even 3.07)
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
didscub said:
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
Click to expand...
Click to collapse
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
*Detection* said:
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
Click to expand...
Click to collapse
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
didscub said:
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
Click to expand...
Click to collapse
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
*Detection* said:
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
Click to expand...
Click to collapse
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
didscub said:
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
Click to expand...
Click to collapse
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
*Detection* said:
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
Click to expand...
Click to collapse
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
didscub said:
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
Click to expand...
Click to collapse
You don't need busybox, that's for creating your own debrick image, the tutorial stops here:
Flash this Debrick file to your 16GB Micro SD card with Win32DiskImager
*Insert your Micro SD card into your computer (backup any information you may have on it we are going to ERASE, FORMAT it to ex FAT
*Open win32DiskImager
*Navigate to the location where you downloaded the correct Debrick file
*Select your Debrick file by double clicking on it
*In the upper right corner of Win32DiskImager you should make sure that the drive letter assigned to your sd card is selected.
***Which ever drive that is listed will be erased, formatted
*Click write in the bottom right hand side
put the Debrick SD card in the Phone, Pull and Replace the Battery
Plug phone in usb and boot into download mode
yout phone should boot into download mode then flash stock firmware via odin
Download link : https://drive.google.com/file/d/0ByA...ew?usp=sharing
You're saying you can't see anything on screen in download mode, just guessing it's there because it cools down - but that could also mean it's not in any mode
With this method, you might get a display to use, then you can flash normally with ODIN with download mode visible on screen
I had to reboot my device due to problems with my speaker. Now i'm not able to boot anymore.
I'm only able to get into ODIN Mode, and flashing new FW or TWRP does nothing. It'll flash correctly, but as soon as it sends the reboot command the device powers off and does not boot, and no, it does not reach the "Galaxy s8, powered by android screen".
It does not want to power on, and only responds to the odin button combo, can't boot into recovery either since nothing works.
I was running the latest version of Renovate Ice if that matters.
I've searched trough some other threads, but it seems like i'm the only one that's having this problem.
Any help or thoughts would be greatly appreciated!
Edit 1: I've tried flashing both AQK7 and AQG5. Both flash fine, but as soon as odin sends the reboot command to my phone, it turns off and does not turn on.
Auto Reboot is ticked. Same goes for any version of TWRP, it will flash, but when it has to reboot the device turns off and does not turn on. There's nothing on the screen, its completely black and the only thing that does work is Download Mode. I've also tried ereasing nand, and repartitioning storage. Both seem to have 0 effect. As stated in one of my replies, i was running the latest build of renovate-ice with magisk, no other mods, or themes installed.
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
FloM94 said:
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
Click to expand...
Click to collapse
Thanks for the reply! Other than using the Renovate-Ice rom, and running magisk the thing was pretty much stock. wasn't messing around in twrp either. Its not stuck in a bootloop either, it just refuses to do anything other than go in and out of DL mode. The phone does not respond to any button imputs other than DL mode. As stated in the OP it does not boot at all, just a black screen. i've already tried to reflash a stock FW and TWRP, but that does not seem to work...
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
More info about your speaker problem
popmpopm said:
More info about your speaker problem
Click to expand...
Click to collapse
There isn't much to say about the problem ,it just stopped working, hence why i rebooted the phone, and ran in to the problem i'm having right now.
FloM94 said:
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
Click to expand...
Click to collapse
Doesn't work sadly, but thanks for the help anyways!
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Jostian said:
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Click to expand...
Click to collapse
I've tried this just now, and it still gives me the same result, it goes trough the process, but as soon as it has to reboot it doesn't boot anymore.
Thanks for the suggestion though!
FloM94 said:
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
Click to expand...
Click to collapse
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
popmpopm said:
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
Click to expand...
Click to collapse
I've had a case on the phone since day one, and I've checked for water damage, but there is non. The tab that is supposed to indicate it is untouched. But thanks for your input! I appreciate it
I have the same problem. Its look like is bootloader issue. try flash this soft :
G950FOWA1AQCC_Recovery
But if you are on newest rom it wont work.
Hello, you can solve this problem?