{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Team OpenKirin AOSP Project. Our goal is to provide
a overall stable AOSP experience across all Huawei/Honor phones
utilizing a Kirin SoC and EMUI 8.0 - either updated or shipped.
So far most of the bugs have been fixed and the ROMs are fully usable
as daily driver - and fully Kirin optimized.
This is the device support section for: Huawei P10.
Any bugs found on this device(s) can be reported here, please include proper logs if you encounter any issues.
We support 3 ROMs in total as of now - LineageOS (Unofficial), ResurrectionRemix OS (Official from Beta 2+), OmniRom
You can find all needed guides/roms on our official website: https://openkirin.net
Requirements: basically full stock EMUI 8.0, with stock recovery/ramdisk
Support: Telegram - https://t.me/joinchat/EeDpi02ekfeJSBeaV4eqOw
XDA:DevDB Information
OpenKirin Treble ROMs, ROM for the Huawei P10
Contributors
OldDroid, XePeleato, surdu_petru
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: LineageOS, ResurrectionRemix OS, OmniRom
Version Information
Status: Beta
Created 2018-08-13
Last Updated 2018-08-27
do you know anyway in which i could unlock my bootloader?
JohnnyMwanza said:
do you know anyway in which i could unlock my bootloader?
Click to expand...
Click to collapse
DC Unlocker is the only way to go as Huawei stopped releasing bootloader unlock codes since July 22, 2018.
I installed the Resurrection Remix and Lineage rom on my P10+ (VKY L29) device and both got me the same problem:
When i boot (the boot is successful), Google starts the first configuration. It asks me the language and the visual properties and then i press "next". The screen remains on "Just a second..." for about forever.
I tried format data before and after, tried to install several Treble roms... Everything took me to the same problem.
I tried also to re-install Gapps, but this took me to another problem: the Google First Configuration is totally black.
What should i do?
McEyes said:
I installed the Resurrection Remix and Lineage rom on my P10+ (VKY L29) device and both got me the same problem:
When i boot (the boot is successful), Google starts the first configuration. It asks me the language and the visual properties and then i press "next". The screen remains on "Just a second..." for about forever.
I tried format data before and after, tried to install several Treble roms... Everything took me to the same problem.
I tried also to re-install Gapps, but this took me to another problem: the Google First Configuration is totally black.
What should i do?
Click to expand...
Click to collapse
Its a know glitch, just reboot and try again.
netmaniack said:
Its a know glitch, just reboot and try again.
Click to expand...
Click to collapse
I tried rebooting about 10 times and he always did the same.
Fortunately I figured out how to resolve this hell:
The Google first configuration setup checks the integrity of the ramdisk Partition. I had a custom recovery so obviously the check was not satisfied.
The solution is to flash the stock recovery ramdisk partition (in my case i download The Official update of Huawei p10 Plus and extracted only the ramdisk image).
When i finished the configuration I completed every setup and then I reinstalled the custom recovery again.
McEyes said:
Fortunately I figured out how to resolve this hell:
The Google first configuration setup checks the integrity of the ramdisk Partition. I had a custom recovery so obviously the check was not satisfied.
The solution is to flash the stock recovery ramdisk partition (in my case i download The Official update of Huawei p10 Plus and extracted only the ramdisk image).
When i finished the configuration I completed every setup and then I reinstalled the custom recovery again.
Click to expand...
Click to collapse
If you have properly read the instructions in OpenKirin website, it was clearly stated there that all these ROMs must be installed wirh stock recovery to avoid other issues.
ej8989 said:
If you have properly read the instructions in OpenKirin website, it was clearly stated there that all these ROMs must be installed wirh stock recovery to avoid other issues.
Click to expand...
Click to collapse
True, I've read the disclaimer, but if someone, like me, used to install ROMs with the same warning without any problem (like an AOSP rom on my previous phone, which I installed having the TWRP), maybe he/she would think that there is not so much to worry about.
However, I noticed that there isn't a real "guide" on internet about a workaround of the "Just a sec" problem, so I wrote that message also for who needs a help and does not know about the partition check.
I found a bug on the "display" menu.
When i select a theme (light, dark, or the black switch), the system theme doesn't change at all. Tried to reboot, clear cache and data of SystemUI, nothing changed.
I bypassed this theme issue with Substratum. Didn't get any bug/problem with Substratum.
Device: P10 plus VKY-L29
Rom: Resurrection Remix 6.1.0 - Oreo - 2018.08.18
McEyes said:
I found a bug on the "display" menu.
When i select a theme (light, dark, or the black switch), the system theme doesn't change at all. Tried to reboot, clear cache and data of SystemUI, nothing changed.
I bypassed this theme issue with Substratum. Didn't get any bug/problem with Substratum.
Device: P10 plus VKY-L29
Rom: Resurrection Remix 6.1.0 - Oreo - 2018.08.18
Click to expand...
Click to collapse
for me working normal
how to root ? can i flash normal magisk or need special for huawei device?
doktor29 said:
for me working normal
how to root ? can i flash normal magisk or need special for huawei device?
Click to expand...
Click to collapse
If you use a normal Huawei EMUI system, there is a special treatment which use a special SuperSu zip file.
Also, you can use a Magisk version, always optimized for Huawei. I found the zip variant in a thread in the P10+ section.
If you have the Treble ROM, which is the main topic of the thread, I did this:
Ensured that there were no setups to do;
Re-flashed TWRP;
Installed the normal Magisk zip from TWRP.
Because is not a EMUI system anymore, you can easily install every mod or patch you wish.
Personal note: I tried install SuperSu with the zip, but the app said "binary occupied". Since it did like that before, with the EMUI system, I gave up and I installed Magisk.
Now it works like a charm.
McEyes said:
If you use a normal Huawei EMUI system, there is a special treatment which use a special SuperSu zip file.
Also, you can use a Magisk version, always optimized for Huawei. I found the zip variant in a thread in the P10+ section.
If you have the Treble ROM, which is the main topic of the thread, I did this:
Ensured that there were no setups to do;
Re-flashed TWRP;
Installed the normal Magisk zip from TWRP.
Because is not a EMUI system anymore, you can easily install every mod or patch you wish.
Personal note: I tried install SuperSu with the zip, but the app said "binary occupied". Since it did like that before, with the EMUI system, I gave up and I installed Magisk.
Now it works like a charm.
Click to expand...
Click to collapse
can you link magisk version?
i try many official but i get info "unable to detect boot image"
doktor29 said:
can you link magisk version?
i try many official but i get info "unable to detect boot image"
Click to expand...
Click to collapse
This is the thread:
https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482
It says is good even for P10.
you must flash it with TWRP
McEyes said:
This is the thread:
https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482
It says is good even for P10.
you must flash it with TWRP
Click to expand...
Click to collapse
what version of recovery You use ? because still wont work, i have 3.1.1 for oreo
you have dencrypted or encrypted data ? i try to decrypt but still in recovery i dont see anything in data partition
Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.
any chance to get rid of this annoying notification of SDCARD after reboot ?
rom ressurection remix
---------- Post added at 09:52 PM ---------- Previous post was at 09:33 PM ----------
antiratar said:
Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.
Click to expand...
Click to collapse
so how i can flash magisk without twrp ?
for me it works only data partition is not vivible due to encryption
can someone test fingerprint after reboot ?
i have strange issue, after reboot my fingerprint is not recognized anymore :/
if i add new one is ok till next reboot, then again my FP is not recognizing.
and no i dont mean it wont work berofre i put PIN/Passoword after reboot it wont work at all after reboot till i add next one :/
it happen in RR and Carbon, other roms i dont test
doktor29 said:
can someone test fingerprint after reboot ?
i have strange issue, after reboot my fingerprint is not recognized anymore :/
if i add new one is ok till next reboot, then again my FP is not recognizing.
and no i dont mean it wont work berofre i put PIN/Passoword after reboot it wont work at all after reboot till i add next one :/
it happen in RR and Carbon, other roms i dont test
Click to expand...
Click to collapse
Are you on stock kernel? Does this happen ALL the time or just random?
doktor29 said:
so how i can flash magisk without twrp ?
Click to expand...
Click to collapse
Instructions here: https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
You only need to use fastboot.
ej8989 said:
Are you on stock kernel? Does this happen ALL the time or just random?
Instructions here: https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
You only need to use fastboot.
Click to expand...
Click to collapse
it happen to me every reboot :/
i have only magisk with stock recovery, from instruction above
doktor29 said:
what version of recovery You use ? because still wont work, i have 3.1.1 for oreo
you have dencrypted or encrypted data ? i try to decrypt but still in recovery i dont see anything in data partition
Click to expand...
Click to collapse
I use the FromFutureRom version that is in the thread I linked before. I think is made especially for Huawei P10/P10+
My data partition is still encrypted.
In order to decrypt data you should format the so called "user data", which is the combination of /data and /sdcard. Don't have to say that you will lose everything on your internal archive, so be sure to backup everything. The external SD card will NOT be affected.
In the TWRP you can to this on the menu "format" -> "format data" -> write "yes" and format everything.
---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------
antiratar said:
Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.
Click to expand...
Click to collapse
You are absolutely right, but I said that you can install TWRP or any custom rom AFTER the Treble Rom installation. I am now on Resurrection Remix Treble rom, with a TWRP recovery installed after the rom flash and everything is fine since the first boot.
Related
Unofficial release -TWRP recovery for the Galaxy J3 Emerge - SM-J327P, Qualcomm MSM8937
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.1.0-0 Released
Mar 10, 2017
TWRP 3.1.0-0 is out now for all currently supported devices.
What's new in 3.1.0-0:
vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention
Official TWRP App
Mar 11, 2017
Official TWRP App
The official TWRP app is the first and only first-party app developed by Team Win for TWRP. Please bear with us as we work to fix any bugs and build out the features. The initial version of the app does not support flashing on the Pixel due to the Pixel's A/B partition layout. In addition, the app may not support finding and flashing images from external storage locations. We are working hard to improve these items and bring you more new features.
Download Links:
We recommend downloading the app from the Play Store.
If you do not have Play Store access, you may download the Official TWRP App here: https://dl.twrp.me/twrpapp/
How do I use the app?
When you first open the app, you will be greeted by a few options. First, you will need to agree not to hold us responsible for anything that happens to your device while using the app. You may also grant the app root permissions. The app will work without root, but some functionality like image flashing will be disabled. Lastly, you can opt into enabling InsightCore (more on this feature later).
Once you have passed this initial screen, you will be greeted with the app home screen where you can choose TWRP FLASH or NETWORK STATISTICS (more on the network statistics later). On the TWRP FLASH screen you will need to select a device. Once you have selected a device, the app will periodically check for new TWRP versions for the device that you have selected. The default interval is once per day, but you can tap on the settings icon in the upper-right to change the interval or disable the update check entirely.
If you enabled root access, you will see options for selecting an image and buttons for flashing the selected image to boot or recovery. Note that you should flash TWRP images to recovery. The boot image flashing is for flashing full boot images (not just kernel zImages) and should not be used for flashing TWRP.
Update 15/3/2017
TWRP 3.1.0-1 MM build released.
Current status: BETA
Features:
MTP working
ADB working
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
NTFS support
F2FS support >> To be added
Twrp app support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory system images from the official firmware can now be flashed with TWRP.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.12.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.1.0-1_j327p_14317
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
To disable forced encryption and mount internal storage:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
no-verity-no-encrypt_ashyx
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, my testers @Doctur, @infixremix, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.
Reserved
Might of bought you a pack of smokes not the beer....either way donation was just a small thankyou...its been awhike withiut root im almost forgetting why i wanted it rooted in the first place lol Enjoy the smokes or w.e the donation goes to
Ur tha sh#$ bro
Doctur said:
Might of bought you a pack of smokes not the beer....either way donation was just a small thankyou...its been awhike withiut root im almost forgetting why i wanted it rooted in the first place lol Enjoy the smokes or w.e the donation goes to
Ur tha sh#$ bro
Click to expand...
Click to collapse
Thanks for the heads up with the other member and your support. I'll report it.
@ashyx by any chance do you have this device? .. i have 7.0 J327P seen it in the Samsung kitchen but not sure if its for the Sprint or Boostmobile worst case odin wont flash it
JUSMEJOSE said:
@ashyx by any chance do you have this device? .. i have 7.0 J327P seen it in the Samsung kitchen but not sure if its for the Sprint or Boostmobile worst case odin wont flash it
Click to expand...
Click to collapse
No sorry i don't own this device.
@ashyx, forgive me for not knowing, I am not familiar all that much with the various Samsung's and pre-paid phones. I have Nexus'.
Question, the boy got a prepaid from Best Buy and it is a Samsung J327P, running 6.0.1 yet the a search on Google shows different chip, a MSM8917. So will this recovery work or not on it? Here is a picture of the about screens.
View attachment 4081849
Don't want to screw it up since I don't have original firmware to flash back to it.
PS I seen in the thread talk of a link to where you can buy a copy of the firmware for some of these could you PM me that link please?
Thank you.
Sent from my Nexus 5X using XDA-Developers Legacy app
rekids said:
@ashyx, forgive me for not knowing, I am not familiar all that much with the various Samsung's and pre-paid phones. I have Nexus'.
Question, the boy got a prepaid from Best Buy and it is a Samsung J327P, running 6.0.1 yet the a search on Google shows different chip, a MSM8917. So will this recovery work or not on it? Here is a picture of the about screens.
Don't want to screw it up since I don't have original firmware to flash back to it.
PS I seen in the thread talk of a link to where you can buy a copy of the firmware for some of these could you PM me that link please?
Thank you.
Click to expand...
Click to collapse
Yes that's the same device. MSM8917 is the same platform as MSM8937.
You have no worries.
Just post back if you get stuck and need the firmware.
Thank you so much ?, will let you know how it goes.
Sent from my Nexus 5X using XDA-Developers Legacy app
I want to try this root but I get enter pin request when I try to turn on OEM unlocking. What should I do?
joeyjojojjjjjj said:
I want to try this root but I get enter pin request when I try to turn on OEM unlocking. What should I do?
Click to expand...
Click to collapse
Pin request? Never heard of that before. Have you set a pin/password on your device?
Nevermind, my daughter pit an unlock pin on it. Got it now going to try this.
Everything went smooth! Thank you so much!
rekids said:
Everything went smooth! Thank you so much!
Click to expand...
Click to collapse
Thanks for the click, out of 141 downloaders only 3 were clickers.
I find it amsusing that the author of the thread below using stolen files from this one has just as many clicks.
https://forum.xda-developers.com/an...-j3-emerge-t3573551/post71443474#post71443474
.
No problems at all... Everything went perfect!
I flashed TWRP and everything is now force closing.. Imma try to root since that factory resets the devices (hope i already had a previous backup of everything)
Edit: Everything worked! Thank you, Dev. One question, do we disable KNOX in SuperSU?
Cyclic said:
I flashed TWRP and everything is now force closing.. Imma try to root since that factory resets the devices (hope i already had a previous backup of everything)
Edit: Everything worked! Thank you, Dev. One question, do we disable KNOX in SuperSU?
Click to expand...
Click to collapse
Yes I'd advise disabling Knox.
need help!!!!
ashyx said:
Yes that's the same device. MSM8917 is the same platform as MSM8937.
You have no worries.
Just post back if you get stuck and need the firmware.
Click to expand...
Click to collapse
Any chance you have the firmware or boot.img? after i flashed the patch all went to hell and now my phone says it has no OS
pumkinhead13 said:
Any chance you have the firmware or boot.img? after i flashed the patch all went to hell and now my phone says it has no OS
Click to expand...
Click to collapse
There's no way the patch did that. You must have wiped the system partition in twrp.
https://www.androidfilehost.com/?fid=817550096634755921
ashyx said:
There's no way the patch did that. You must have wiped the system partition in twrp.
Click to expand...
Click to collapse
uuuh no, so I did all the above said to do and everything was fine, it booted up (before i flashed the patch) then I went back into recovery, flashed the patch and selected "boot to system" it booted to samsung logo then at the top in small yellow writing just said "kernal" it sat there for 15 mins, before i pulled the battery, then flashed again....this time upon finish it stated "NO OS"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei P9 Plus (VIE)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-vie.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running stock kernel from b380+
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a kernel from b380 or later
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_vie/releases/download/3.1.1-1/twrp-3.1.1-1-vie.img"][U]download twrp-3.1.1-1-vie.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which P9+ models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Every ROM based upon b380+ kernel should now include proper loop support.
Since 3.1.0-3 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Plus
Contributors
OldDroid, surdu_petru, xepeleato
Version Information
Status: Stable
Created 2017-04-04
Last Updated 2017-06-11
Reserved
any working twrp for emui 4,1 with decryption support?
Thx bro
Thx for this nice work @OldDroid
This twrp works fine and root too....
VIE-L29C185 does it work?
I think model device is convenient. is it correct? I will be happy if you give me information.
goksemozkan said:
I think model device is convenient. is it correct? I will be happy if you give me information.
Click to expand...
Click to collapse
It is working good on my VIE-L29C185B360! Go ahead, use it and enjoy....
Addymore said:
It is working good on my VIE-L29C185B360! Go ahead, use it and enjoy....
Click to expand...
Click to collapse
my friend. What supersu have you uploaded, give a link.
https://forum.xda-developers.com/p9/...t3565703/page4
DL: http://filestore.to/?d=B9J55H6X9F link empty
goksemozkan said:
my friend. What supersu have you uploaded, give a link.
https://forum.xda-developers.com/p9/...t3565703/page4
DL: http://filestore.to/?d=B9J55H6X9F link empty
Click to expand...
Click to collapse
For root, I flashed this supersu for emui5....in twrp provided up! Working like a charm...! Thx to @OldDroid
Addymore said:
For root, I flashed this supersu for emui5....in twrp provided up! Working like a charm...! Thx to @OldDroid
Click to expand...
Click to collapse
Thanks to all my friends, now root and supersu are working perfectly.
And I will definitely enjoy :good::good::good:
Now, start nel custom rom
Works perfectly on VIE-L29C636 , thank you!
Thank you so much man
successfully got TWRP and root on VIE-L29C185
Good job my friend
Hi,
How can I flash twrp in emui 7? I've tryed several tutorials but I can't do it.
Best Regards
SuperTamagochi said:
How can I flash twrp in emui 7? I've tryed several tutorials but I can't do it.
Click to expand...
Click to collapse
Have you unlocked the bootloader?
Hi guys. Sombody help me. How can i flash magisk on my p9 plus, i try many twrp, but everytime i see loop?
New release is up - TWRP 3.1.1-0 for P9 Plus.
Kernel should now support loop from b381 onwards.
Check OP for download link and github for more information!
P9 Plus Releases + Changelog
Regards
I'm sorry for the inconvenience but i forgot to exclude the special directory inside the /data partition during wipe/factory reset.
I've re-uploaded the fixed release, so everyone who had already installed 3.1.1-0 should now re-download and re-install.
Best regards
I'm sorry if this question has been asked somewhere else before, but can I flash an OTA update (extracted .zip) using TWRP, while keeping TWRP and SU?
It's quite bothersome to go back to full-stock, lock the bootloader, run the update, unlock the bootloader and root again, just for a minor update like B360 to B370.
I'm currently on B360 with TWRP 3.1.0 and SuperSU (rooted).
Rupert van da Cow said:
I'm sorry if this question has been asked somewhere else before, but can I flash an OTA update (extracted .zip) using TWRP, while keeping TWRP and SU?
It's quite bothersome to go back to full-stock, lock the bootloader, run the update, unlock the bootloader and root again, just for a minor update like B360 to B370.
I'm currently on B360 with TWRP 3.1.0 and SuperSU (rooted).
Click to expand...
Click to collapse
Hi, I can tell you in advance that NO, at least with an earlier version and that in principle it is only for normal P9.
Actually, you could only install that recovery, but with that I do not know what to tell you.
Anyway, due to the internal form of Huawei updates, they can not be installed since twrp, at least I have not been able to, nor anyone I know.
Sorry for my bad English, I do not know, and I use a translator.
Enviado desde mi VIE-L09 mediante Tapatalk
Red Wolf Recovery Project
Red Wolf Recovery is custom recovery based on the TWRP source code with it's own unique features. And one of these features is also support of the MIUI Incremental OTA's! However this thing is slightly more complicated then just downloading of the zip and flashing.. You have to first enable some things for this and flash some another ZIP file etc. So that's reason why i think that it would be nice to create a guide for this. Now let's look at it...
Pre-requisite
Redmi Note 3 - Snapdragon version!
Common sense
Steps
Download latest build of the recovery from here. And correctly follow the installation process.
After the correct installation reboot your device in to the recovery.
Now click on the "Advanced" and then on "Special Actions".
Here enable these checkboxes:
"Support MIUI Incremental OTA" and "Include System in OTA Survival".
Now clean/dirty flash some full MIUI ROM and flash whatever you want after that.
Now reboot your device in to the system.
When you get some update just download it using updater app and let it automatically reboot in to the RedWolf
Now everything is done! RedWolf will automatically install it and reboot back to the system!
After that you don't have to flash full ROM anymore.. Just always wait for the update from updater app and let it automatically reboot in to the RedWolf.
Now you can flash SuperSU or Magisk and incremental OTA's without any hustles. Use the built-in SuperSU/Magisk option for rooting your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Frequently Asked Questions
Q. I am getting Error 7 while flashing incremental OTA?
Ans: If you are really sure that you followed the installation process correctly then send us a log or screenshot and we will look at it.
Q. Can I install xposed, Viper, blah blah..?
Ans: Yes! You can install anything but make sure that you use this recovery for flashing the zip files.
Q.This recovery can be used in any ROM?
Ans: Yes! You can use this recovery in any ROM.
ATG Droid said:
Red Wolf Recovery Project
Red Wolf Recovery is custom recovery based on the TWRP source code with it's own unique features. And one of these features is also support of the MIUI Incremental OTA's! However this thing is slightly more complicated then just downloading of the zip and flashing.. You have to first enable some things for this and flash some another ZIP file etc. So that's reason why i think that it would be nice to create a guide for this. Now let's look at it...
Pre-requisite
Redmi Note 3 - Snapdragon version!
Common sense
Steps
Download latest build of the recovery from here. And correctly follow the installation process.
After the correct installation reboot your device in to the recovery.
Now click on the "Advanced" and then on "Special Actions".
Here enable these checkboxes:
"Support MIUI Incremental OTA" and "Include System in OTA Survival".
Now clean/dirty flash some full MIUI ROM and flash whatever you want after that.
Now reboot your device in to the system.
When you get some update just download it using updater app and let it automatically reboot in to the RedWolf
Now everything is done! RedWolf will automatically install it and reboot back to the system!
[SIZE="3! You can use this recovery in any ROM.
Click to expand...
Click to collapse
Its much better than ZCX since once zcx is replaced by official twrp then it requires full wipe so keep up the good job.
What is different from zcx twrp
Sent from my Redmi Note 3 using Tapatalk
Androbots said:
Its much better than ZCX since once zcx is replaced by official twrp then it requires full wipe so keep up the good job.
Click to expand...
Click to collapse
Can I flash this on 2gb ram variant?
lordsh said:
What is different from zcx twrp
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Look at the thread in the development section.. Here is the feature list. Anyway the main difference here is that RedWolf is based on the latest TWRP base and it also support AOSP 8.0.0 based ROMs
rohan_45 said:
Can I flash this on 2gb ram variant?
Click to expand...
Click to collapse
Yup
In ZCX the system img file (size more than 1 gb) is stored in sdcard. Do RedWolf also stores the system img file in sdcard ? (for incremental ota updates)
What if i edit build.prop...will i still be able to update incremental updates??
is that really ota update working on it??anyone tested??
umang0712 said:
What if i edit build.prop...will i still be able to update incremental updates??
Click to expand...
Click to collapse
Depends on what will you edit.
I can't save my custom settings, like reverse nav bar, system time etc. It is auto defaulted after every reboot. How can I save them?
Awesome recovery looks great, but I will downgrade to ZCX until the "bad app" checking is fixed.
Thanks.
M RN3 got bootloop . its not booting only mi logo showing what to do pls help fast as it is not my phone !! Its my fathers pls help guys. The device was running miui 8 marshmallow one. I did flashed correctly twrp also boot up but then I selected reboot to system from within twrp and it doesn't boot to system . What to do pls help. No offence to the twrp recovery developer but I need help pls ? Guys
kg hggggg tightly said:
M RN3 got bootloop . its not booting only mi logo showing what to do pls help fast as it is not my phone !! Its my fathers pls help guys. The device was running miui 8 marshmallow one. I did flashed correctly twrp also boot up but then I selected reboot to system from within twrp and it doesn't boot to system . What to do pls help. No offence to the twrp recovery developer but I need help pls ? Guys
Click to expand...
Click to collapse
Dude I got the same problem, download lazyflasher zip file ,flash it through twrp ,and reboot,it worked for me
dudemathai said:
Dude I got the same problem, download lazyflasher zip file ,flash it through twrp ,and reboot,it worked for me
Click to expand...
Click to collapse
Ya i understood so that means that if i want to flash custom rom will i need to flash lazyflasher whenever i flash a custom rom?
kg hggggg tightly said:
Ya i understood so that means that if i want to flash custom rom will i need to flash lazyflasher whenever i flash a custom rom?
Click to expand...
Click to collapse
I don't think you need to flash it when you change roms,what I know is that lazyflasher bypasses miui so that you won't be stuck in bootloop while you flash anything into miui
otyg said:
Awesome recovery looks great, but I will downgrade to ZCX until the "bad app" checking is fixed.
Thanks.
Click to expand...
Click to collapse
What problem are you facing? This recovery seems better and updated than ZCX.
Sent from my Redmi Note 3
can i use magisk with this?
rs168 said:
can i use magisk with this?
Click to expand...
Click to collapse
Yes
is this support with newest miui 9..?
xerocracker said:
is this support with newest miui 9..?
Click to expand...
Click to collapse
Yes
Sent from my Redmi Note 3 using XDA Labs
Unofficial release -TWRP recovery for the Galaxy J3 2017 - SM-J330F/FN/FZ/G/DS EXYNOS 7570
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1-0 Released
May 22, 2019
TWRP 3.3.1-0 is out now for most currently supported devices.
What's new in 3.3.1-0:
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance
UPDATE 10/8/2019
TWRP 3.3.1-1 OO/PP build released
Current status: Beta
Update 15/9/2018
TWRP 3.2.3-1 OO build released.
Current status: Stable
Update 27/1/2018
TWRP 3.2.1-1NN build released
Current status: Stable
Update 23/11/2017
TWRP 3.1.1-1 NN build released.
Current status: Stable
Features:
TOUCHSCREEN working
MTP working
ADB working
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
NTFS support
F2FS support >> To be added
Twrp app support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory system images from the official firmware can now be flashed with TWRP.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.[/B]
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
2. Uncheck Auto reboot. (NOT REQUIRED FOR INSTALLING TWRP 3.3.1-1)
3. Load the respective file below into the AP slot and hit start.
4. After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME. (NOT REQUIRED FOR INSTALLING TWRP 3.3.1-1, THE DEVICE WILL AUTO BOOT TO RECOVERY)
5. Flash the V3 RMM bypass zip
https://forum.xda-developers.com/showpost.php?p=79745844&postcount=627
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT AND BECOMING RMM LOCKED FOR 7 DAYS.
I ALSO SUGGEST BACKING UP ANYTHING YOU NEED ON INTERNAL STORAGE. AT SOME POINT YOU MAY EXPERIENCE A 'VERIFICATION FAILED MESSAGE' .
THIS IS NORMAL, BUT WILL REQUIRE THE DATA PARTITION TO BE FORMATTED IN TWRP.
DOWNLOAD:
twrp_3.3.1-1_sm-j330x_13819
twrp_3.2.3-1_j330_13918
twrp_3.2.1-1_sm-j330f_270117
twrp_3.1.1-1_sm-j330f_231117
Nougat Root instructions:
Install latest Magisk release with TWRP:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
To disable forced encryption, disable dmverity and mount internal storage:
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install the boot image patch.
Boot image patch
no-verity-no-encrypt_ashyx
5. Install Magisk(if root is required)
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
6. Reboot
OREO ONLY ROOT INSTRUCTIONS:
1. Install the Root patch kernel with TWRP.
J330F-FN_root_no_sim_patch
NOTE:This is a custom Oreo J330F/FN XXU3BRG3 permissive/enforcing kernel and patch built from source. It makes changes to the system partition also.
What does it do?:
*It installs a custom kernel to fix the no SIM issue when rooting.
*Patches the system to fix WIFI and Bluetooth not turning on when using custom kernels.
*Patches DM-Verity.
*Removes forced encryption and patches /data not able to be mounted (after formatting).
*Removes the SecurityLogAgent nag when using a custom kernel.
2. If you wish to mount /DATA for access to internal storage then FORMAT the /DATA partition.
3. To root install the latest Magisk below.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
PIE ONLY ROOT INSTRUCTIONS:
To root install latest Magisk below.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
To disable encryption (mount DATA in TWRP) install the zip below with TWRP:
Disable_Dm-Verity_ForceEncrypt_Quota_08.02.2019
Finally FORMAT /DATA in TWRP.
Reboot.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, my tester @lemlis, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
UPDATE: Touchscreen fixed
.
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
---------- Post added at 22:19 ---------- Previous post was at 22:16 ----------
Anual said:
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
Click to expand...
Click to collapse
Now my j330g working normally after i flash cf auto root without flashing stock rom. What's the problem??
Anual said:
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
---------- Post added at 22:19 ---------- Previous post was at 22:16 ----------
Now my j330g working normally after i flash cf auto root without flashing stock rom. What's the problem??
Click to expand...
Click to collapse
Probably the version of SuperSu you flashed.
ashyx said:
twrp_3.1.1-1_sm-j330f_231117
Click to expand...
Click to collapse
Thanks.now color in TWRP is blue.Only in screenshot yellow.backup CPEFS is 0 ? with changed recovery.fsab i have CPEFS 8MB
Works all good.
lemlis said:
Thanks.now color in TWRP is blue.Only in screenshot yellow.backup CPEFS is 0 ? with changed recovery.fsab i have CPEFS 8MB
Works all good.
View attachment 4340464View attachment 4340476
Click to expand...
Click to collapse
Seems I didn't include my updated FSTAB in the new build. Corrected, thanks for pointing it out.
ashyx said:
Probably the version of SuperSu you flashed.
Click to expand...
Click to collapse
Yeaa you right..i use super su which remain in my memory card almost 2 years ago ???
Sorry for this offtopic but can anyone post a link of latest firmware for J330G/DS, which doesn't want to grab my money for Fast download speed please? I want to try this recovery but still afraid if something bad happens. Thanks in advance!
@ashyx, thank you so much for this recovery sir! I've been waiting for a recovery for this phone for so long and now it's here! you managed to create this recovery for this phone even without one! I'm impressed sir!
BlackDragonz said:
Sorry for this offtopic but can anyone post a link of latest firmware for J330G/DS, which doesn't want to grab my money for Fast download speed please? I want to try this recovery but still afraid if something bad happens. Thanks in advance!
@ashyx, thank you so much for this recovery sir! I've been waiting for a recovery for this phone for so long and now it's here! you managed to create this recovery for this phone even without one! I'm impressed sir!
Click to expand...
Click to collapse
updato.com
i cant flash super su twrp didn't show the file to flash
File to flash have to be on sd card ?
Help Me
azhar960225 said:
Help Me
Click to expand...
Click to collapse
Police. Fire or ambulance?
I Want root j3 pro 2017..but how
azhar960225 said:
I Want root j3 pro 2017..but how
Click to expand...
Click to collapse
Flash SuperSU or Magisk.
How? To Flash How? Cannot root j3 How to Flash?
7.11 Android...
arabarabow said:
twrp didn't show the file to flash
Click to expand...
Click to collapse
put zip file inside any folder.File to flash have to be in folder
Just done flashing latest build and flashed magisk, all are running fine. Tysm @ashyx !
can anyone help me telephone stuck on logo and i cant do nothing even reboot to twrp @ashyx
arabarabow said:
can anyone help me telephone stuck on logo and i cant do nothing even reboot to twrp @ashyx
Click to expand...
Click to collapse
Boot to TWRP and flash Supersu or Magisk. Use the three button combo.
Can i just use cf auto root to root my phone without installing a recovery? Or it's better to root using this method?
Hello,
My goal is to get an Android 11 Stable version with TWRP recovery and magisk root.
I cannot achieve this goal cause of an error - "Qualcomm crashdump" - i get when trying to boot into TWRP.IMG
Does anyone managed to install twrp recovery and root with Android 11 stable?
Thanks
BenoMosko said:
Hi!
First Thanks for the reply.
Second, I opened a thread just for that, maybe you can share your wisdom with us over there
Stable Oxygen OS/Android 11 fastboot boot twrp.img lead to Qualcomm Crashdump
Hello, My goal is to get an Android 11 Stable version with TWRP recovery and magisk root. I cannot achieve this goal cause of an error - "Qualcomm crashdump" - i get when trying to boot into TWRP.IMG Does anyone managed to install twrp...
forum.xda-developers.com
I dont have a T-Mobile OP6T i have a global device.
"it could work to set up a rooted OOS 10 (which should give you less trouble) and then use the method I described above to upgrade."
Can you share and give us step by step instruction please?
Which version should i be on with installing twrp recovery and root using magisk?
10.3.8?
10.3.12?
cant i do it straight from 11?
thanks.
Click to expand...
Click to collapse
I believe there's a rollback zip which could help you out. It's at the bottom of this article. Not sure if it works on stable. Note that it wipes everything!
scorpio76r said:
Yes, I have the T-Mobile which is internationally converted
Click to expand...
Click to collapse
TMO has not been very kind to development in any way. It may just take some time for modding to catch up or you may find a way. Much luck finding the answer I personally stay as far away from provider branded devices as I can
Timmmmaaahh! said:
I believe there's a rollback zip which could help you out. It's at the bottom of this article. Not sure if it works on stable. Note that it wipes everything!
TMO has not been very kind to development in any way. It may just take some time for modding to catch up or you may find a way. Much luck finding the answer I personally stay as far away from provider branded devices as I can
Click to expand...
Click to collapse
You are so correct. I will never purchase a carrier branded device again.
Timmmmaaahh! said:
I believe there's a rollback zip which could help you out. It's at the bottom of this article. Not sure if it works on stable. Note that it wipes everything!
TMO has not been very kind to development in any way. It may just take some time for modding to catch up or you may find a way. Much luck finding the answer I personally stay as far away from provider branded devices as I can
Click to expand...
Click to collapse
Hi,
I have the rollbacks and i can use mstool to do rollbacks to 10.3.8
that's not my issue.
Lets organize it.
I have a goal - OnePlus 6T with OOS11+TWRP+ROOT
can i achieve this goal?
if yes,
can u please give me details on how to achieve?
thanks.
BenoMosko said:
Hi,
I have the rollbacks and i can use mstool to do rollbacks to 10.3.8
that's not my issue.
Lets organize it.
I have a goal - OnePlus 6T with OOS11+TWRP+ROOT
can i achieve this goal?
if yes,
can u please give me details on how to achieve?
thanks.
Click to expand...
Click to collapse
This would also be helpful to people who are just purchasing this device which most likely will have the 11 update already
BenoMosko said:
Hi,
I have the rollbacks and i can use mstool to do rollbacks to 10.3.8
that's not my issue.
Lets organize it.
I have a goal - OnePlus 6T with OOS11+TWRP+ROOT
can i achieve this goal?
if yes,
can u please give me details on how to achieve?
thanks.
Click to expand...
Click to collapse
With an international version, I don't see any reason why it wouldn't work. After MSM'ing (whichever version) I'd first make sure it gets a working TWRP and Magisk root, then upgrade to latest 10 keeping the method I described in mind (to keep TWRP and root alive), then take the same step towards 11. I don't think it even matters which 10 is present, the full stable 11 zip will upgrade it either way. I was one (security) update behind.
Timmmmaaahh! said:
With an international version, I don't see any reason why it wouldn't work. After MSM'ing (whichever version) I'd first make sure it gets a working TWRP and Magisk root, then upgrade to latest 10 keeping the method I described in mind (to keep TWRP and root alive), then take the same step towards 11. I don't think it even matters which 10 is present, the full stable 11 zip will upgrade it either way. I was one (security) update behind.
Click to expand...
Click to collapse
Thank you so much for the support
"keeping the method I described in mind"
can you please copy paste it here?
and maybe do a little
1.
2.
3.
steps instructions please????????
thanks.
BenoMosko said:
Thank you so much for the support
"keeping the method I described in mind"
can you please copy paste it here?
and maybe do a little
1.
2.
3.
steps instructions please????????
thanks.
Click to expand...
Click to collapse
I already did
Timmmmaaahh! said:
That makes SafetyNet pass? I did the classic routine:
Install full zip (OnePlus6TOxygen_34.J.60) via 'Local upgrade' - no rebooting
Flash TWRP installer (I had 3.4.0-11) via Magisk - no rebooting
Flash Magisk via Magisk to other slot
Reboot! All done.
Click to expand...
Click to collapse
Timmmmaaahh! said:
I already did
Click to expand...
Click to collapse
Great, Thanks.
One more question...
when going back to 10.3.8 to install twrp, can i use the latest twrp version and not "3.4.0-11"?
thanks.
Timmmmaaahh! said:
I already did
Click to expand...
Click to collapse
Hi ..Will the twrp version 3.5.2-9 work too? Or do we have to use this version in your post?
Would flashing OOS 10 back clear all my data? Is there way to just install the TWRP and root it with magisk zip like we did earlier?
shreyas.kukde said:
Would flashing OOS 10 back clear all my data? Is there way to just install the TWRP and root it with magisk zip like we did earlier?
Click to expand...
Click to collapse
It has been a no go so far trying to get magisk and twrp on 11. I guess we will need to use the msm tool and,start from scratch
BenoMosko said:
Great, Thanks.
One more question...
when going back to 10.3.8 to install twrp, can i use the latest twrp version and not "3.4.0-11"?
thanks.
Click to expand...
Click to collapse
Libraplum76 said:
Hi ..Will the twrp version 3.5.2-9 work too? Or do we have to use this version in your post?
Click to expand...
Click to collapse
I really don't think versions are all that important. Try the latest one and work your way down from there? Best practice IMHO is just revisiting the TWRP thread when preparing to flash and check for any anomalies in OP and last 2 or 3 pages of the thread. Do the same for anything you need to flash (Magisk, OOS or custom ROM thread, etc.). More reading lowers the chances of failure.
Just use fastboot flash boot_a boot.img and preferably fastboot flash boot_b boot.img, instead of boot.img use beta3 prerooted and preinstalled with twrp boot image - you can find it somewhere on this forum in another section. Then just from fasboot boot to recovery and install oos11 again.
ppajdek said:
Just use fastboot flash boot_a boot.img and preferably fastboot flash boot_b boot.img, instead of boot.img use beta3 prerooted and preinstalled with twrp boot image - you can find it somewhere on this forum in another section. Then just from fasboot boot to recovery and install oos11 again.
Click to expand...
Click to collapse
You just brung hope, thank you. I will definitely go on the hunt for that recovery image*Edit, just found the link https://forum.xda-developers.com/t/...1-open-beta-2-and-open-beta-3-latest.4316563/
This has been solved for the oneplus 6t international converted on Oxygen 11 stable. Using the PRO3 file from the link I posted earlier (shout out to member KizuYuna who made and, provided the PRO3 file, also shout out to ppajdek for pointing me in the right direction ) I fastboot flash boot the file (simple drag and drop) it brought me to a twrp called pitch black( yaay! I had some form of twrp) while in there I flashed the 3.5.1_9-0 fajita installer zip. Next, I hit the power button in the pitch black twrp that gave me a option to reboot to recovery. Yaay, I rebooted to twrp 3,5.1_9-0. Next I flashed the latest 11 oxygen stable. After that I flashed the twrp installer again. After that, I rebooted to recovery (was glad I hadn't bricked by now) Next, I flashed magisk 23.0 and, lastly rebooted to system. (shocked that I didn't get a crash dump screen, lol) went into magisk and, enabled magisk hide. Here are pictures of the result, yaay. I did not post a picture of twrp, but yes it works and is present.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
scorpio76r said:
This has been solved for the oneplus 6t international converted on Oxygen 11 stable. Using the PRO3 file from the link I posted earlier (shout out to member KizuYuna who made and, provided the PRO3 file, also shout out to ppajdek for pointing me in the right direction ) I fastboot flash boot the file (simple drag and drop) it brought me to a twrp called pitch black( yaay! I had some form of twrp) while in there I flashed the 3.5.1_9-0 fajita installer zip. Next, I hit the power button in the pitch black twrp that gave me a option to reboot to recovery. Yaay, I rebooted to twrp 3,5.1_9-0. Next I flashed the latest 11 oxygen stable. After that I flashed the twrp installer again. After that, I rebooted to recovery (was glad I hadn't bricked by now) Next, I flashed magisk 23.0 and, lastly rebooted to system. (shocked that I didn't get a crash dump screen, lol) went into magisk and, enabled magisk hide. Here are pictures of the result, yaay. I did not post a picture of twrp, but yes it works and is present. View attachment 5384313View attachment 5384315
Click to expand...
Click to collapse
Great! Worked for me too. Thought I could never get Root or Twrp again.
scorpio76r said:
It has been a no go so far trying to get magisk and twrp on 11. I guess we will need to use the msm tool and,start from scratch
Click to expand...
Click to collapse
A telegram group titled OnePlus 6T Chat has a user who said he flashed latest TWRP and Latest Magisk and it worked for him. Strange..
shreyas.kukde said:
A telegram group titled OnePlus 6T Chat has a user who said he flashed latest TWRP and Latest Magisk and it worked for him. Strange..
Click to expand...
Click to collapse
Shocking, lol
scorpio76r said:
Shocking, lol
Click to expand...
Click to collapse
Can you provide the TWRP zip that you flashed?