Related
Rebuilding and updating
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
https://drive.google.com/open?id=0B3vLobe8_2u7THFQRGJTNDI5Umc
https://drive.google.com/open?id=0B3vLobe8_2u7VVhMTkNDUGUwTVU
http://23pin.logdown.com/posts/240975-zenfone-rescue-guide
https://4pda.ru/forum/index.php?showtopic=584672&st=460#entry33842670
https://firmware27.blogspot.cz/2014/12/file-raw-asus-zenfone.html
When you have white USB logo on your phone you only need shut down device and after press volume up button with power button. When you after this acces in droidboot you only need select reboot and after USB logo disappear. Before doing this steps you must disconnect your phone from USB cable.
When you dont have unlocked bootloader you cant flash recovery,fastboot or system. You only can sideload stock firmware.
what is the different on your tool unlocking bootloader?
droidboot_sign.img
swiczak said:
droidboot_sign.img
Click to expand...
Click to collapse
a to je ?
del
swiczak said:
To ti přihlásí fastboot (bootloader) prostě ti to zapíše seriový IMEI a fachá to pouze jenom s tím starým bootloaderem..zkoušel jsem to udělat tak že by se rovnou přeflashnul novej lollipop bootloader ale prostě nefunguje protože není sign. To samí je třeba u Gapps, taky mas přihlášeny a nebo neprihlášeny.
Click to expand...
Click to collapse
imei je ale identifikace telefonu v siti, je to na volani, jen si dej do ciselniku *#06#, nemyslel jsi treba serial number ? ale jestli to mas spravne tak promin jinak seriovy cislo v bootloaderu na lollipopu bude porad 123456blabla pokud teda nepouzijes starej bootloader, neni to chyba
del
swiczak said:
No tak jsem vyřešil jenom sériový číslo Stane se
Click to expand...
Click to collapse
v pohode
Doesn't take me to droidboot
When I click the debrick.bat, it doesn't take me to droidboot. My phone just had the usb logo with a red bar below. Please help me.
Awesome... it fixed my device thank you very much
Edit: after booting (it showed that the device is almost completely charged) i powered off the device and tried to power it on but it didnt boot
after connecting the charger it shows that the device is charging but i can neither boot the device nor access fastboot or recovery
i will try booting again after it shows that the battery is completely charged
Edit2: the green battery bar is completely filled but the LED is still orange
Edit3k its booting normally again
thank you , but if i want remove imei not recovery it , what i can do ?
custom rom , CM13 - Asus Zenfone 5 A500CG
now mobile works but battery not charging and after flashing battery is 0
how to fix this problem
rashmi0733 said:
now mobile works but battery not charging and after flashing battery is 0
how to fix this problem
Click to expand...
Click to collapse
did you try to use another cable, maybe your cable is not working well
ozank said:
did you try to use another cable, maybe your cable is not working well
Click to expand...
Click to collapse
use different cable , charger , plug but not charging led is on but battery not charging.
rashmi0733 said:
use different cable , charger , plug but not charging led is on but battery not charging.
Click to expand...
Click to collapse
if charging led is on, how is battery not charging?
assuming that now you have fastboot, maybe you can change to your latest fastboot (which were you using from kitkat or lollipop)
After run debrick.bat, my device not into droidboot. After showing usb logo, my device vibrate and showing intel inside logo repeated. Any solutions? sorry my bad english
Hello guys,
I'm in trouble with my zenfone 6 A601ac. Trying to solve the problem of "no signal" of my two sim cards, installed and reinstalled several times the stock firmware. And as a last attempt of desperation I did the command (fastboot fastboot flash fastboot.img) with fastboot.img of zenfone 5 (not 6). However, I did not had no more access to Droidboot / Fastboot (vol + / power), when I did this command the device enters an infinite loop, no way, with zenfone running android interface no longer was possible the fastboot command, when I did this command only appears the message "waiting for device".
Than, I saw this post, and did all debrick process. Now i can use fastboot pressing Vol + and Power as should to be, But, My screen is dead!!!! Sometimes appears some white lines when should appears asus logo. I'm thinking about some kind of screen resolution problem. Now i can't install the rom, cause i cant enter on ADB ( no see nothing). Has someone any idea???
Please help me!!!
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
bpodnar said:
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
Click to expand...
Click to collapse
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
mokahabashy said:
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
Click to expand...
Click to collapse
Did you use usb 2.0 or 3.0? 3.0 is not good for this
bpodnar said:
Did you use usb 2.0 or 3.0? 3.0 is not good for this
Click to expand...
Click to collapse
i used usb 2
man my phone is fully dead boot
can not enter EDL mod or qualcom download mod
i tried make deep flash cable , it did not work
when i connect any usb to my mobile , even the charger i got my device vibrated every 2 second
i have to force it to EDL mod without using any cable
i have a question : i rooted the phone , so when i send it to warranty center would they know that i rooted my phone ?
what should i tell them ?
I think the service cannot detect that your phone is rooted because they cant turn it on. If they flash it from scratch the root will be gone.
Bro your phone opening case and Google search testpoint
---------- Post added at 01:34 AM ---------- Previous post was at 01:33 AM ----------
---------- Post added at 01:35 AM ---------- Previous post was at 01:34 AM ----------
My devices is not flashing and not edl cable test point is working only miphone 64 download and flashing 7.8.23 rom and devices is back bro
mokahabashy said:
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
Click to expand...
Click to collapse
Same happened with me....
Shubham2509 said:
Same happened with me....
Click to expand...
Click to collapse
Same did you get any solution?
Haseeb Ahmed Khan said:
Same did you get any solution?
Click to expand...
Click to collapse
I gave my phone to service center
Shubham2509 said:
I gave my phone to service center
Click to expand...
Click to collapse
did they fix it? or gave you a new one?
Haseeb Ahmed Khan said:
did they fix it? or gave you a new one?
Click to expand...
Click to collapse
Fix
Shubham2509 said:
Fix
Click to expand...
Click to collapse
There is another way directly on Miforum app. Basically you need to open back housing and short 2 cantacs. More you can read at Miforum when you search for Unbrick MI A1
Nice story, important lesson, note to self:
"Google more" (so you don't have to pay the service center so they do it for you and charge you a lot of moneyz)
My cell phone brick, I did the qfil procedures but the same thing continues, the cell vibrates, the pc recognizes but the screen does not turn on, someone can help
plz gave me solution my phone is asus zenfone max pro m1 black screen and vibration
soufkas said:
plz gave me solution my phone is asus zenfone max pro m1 black screen and vibration
Click to expand...
Click to collapse
Does it connect to your computer? (Connect sound, device manager, ...)
Sent from my ZenFone Max Pro M1 using Tapatalk
RedGreenBlue123 said:
Does it connect to your computer? (Connect sound, device manager, ...)
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
Yes, it connects to the computer, but no image appears, only a black screen, light white lighting, and charging sound
Same problem for me
Please help
I wiped all the data with TWRP and i reboot mobile without installing OS , after that it'll shows black screen, But it is connecting to PC , I checked in command window it's working.. And i tried Flashing 334 stock ROM though ADB , it's done but always showing light black screen..
please get out this situation..
thanks in advance
sharathcherry1699 said:
Please help
I wiped all the data with TWRP and i reboot mobile without installing OS , after that it'll shows black screen, But it is connecting to PC , I checked in command window it's working.. And i tried Flashing 334 stock ROM though ADB , it's done but always showing light black screen..
please get out this situation..
thanks in advance
Click to expand...
Click to collapse
See QFIL method
Adb reboot EDL
Then do the instruction
Or use fastboot (AFT) ROMs will help
Sent from my ZenFone Max Pro M1 using XDA Labs
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Schon Villamor said:
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Click to expand...
Click to collapse
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
zgfg said:
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
Click to expand...
Click to collapse
I apologize, I did not know that they're different, but how can I fix this?
Schon Villamor said:
I apologize, I did not know that they're different, but how can I fix this?
Click to expand...
Click to collapse
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
zgfg said:
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via m
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
Click to expand...
Click to collapse
How can I flash when my phone can't boot into fastboot? Can't boot into anything, it just shows the battery charge screen when I turn it on (even without plugging it in a charger). I have my bootloader unlocked
Click to expand...
Click to collapse
Click to expand...
Click to collapse
But you can ask in the right XDA subforum for your phone - where somebody familiar with your device could help you, or you cannot (or you don't want)?!
If you hard bricked your phone then you will need to find somebody to help you with the paid EDL account - usually they cannot advertise on XDA since advertising the paid support is forbidden. You should seek around on TG channels and so
That was the last my answer for you. Cannot help you better for your different phone. Good luck