Database Users

How to flash Huawei Y300 with official rom

Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards

Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex

If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.

what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update

i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??

How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?

HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance

tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?

Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse

I tried the official one but the performance is very low:crying::crying::crying::crying:

Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.

Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.

babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM

hey someone flashed the official rom successfully?

zeroing imei
can you write how to zero imei code

flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>

huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.

falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it

Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app

Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.

Meizu M2 Note Easy Way To Root & Flash TWRP Recovery

Delete post!

this work on M571c from china telecom ????

zaii0007 said:
this work on M571c from china telecom ????
Click to expand...
Click to collapse
Yes can work but you need to flash A FLYME 1st then can flash CM

Mr0oHo0 said:
Yes can work but you need to flash A FLYME 1st then can flash CM
Click to expand...
Click to collapse
thanck you Brother for reply , any tuto to do this ?

zaii0007 said:
thanck you Brother for reply , any tuto to do this ?
Click to expand...
Click to collapse
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done

Mr0oHo0 said:
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Click to expand...
Click to collapse
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme

zaii0007 said:
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
Click to expand...
Click to collapse
Q version more easy, just download A version firmware then flash over it that all.

I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.

imyesbest1 said:
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
Click to expand...
Click to collapse
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C

Mr0oHo0 said:
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Click to expand...
Click to collapse
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?

imyesbest1 said:
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
Click to expand...
Click to collapse
After you flash A firmware you follow my this post everything will be fine.

Mr0oHo0 said:
Q version more easy, just download A version firmware then flash over it that all.
Click to expand...
Click to collapse
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,

zaii0007 said:
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
Click to expand...
Click to collapse
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"

Mr0oHo0 said:
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Click to expand...
Click to collapse
i have the message "Firmware corrupt"

zaii0007 said:
i have the message "Firmware corrupt"
Click to expand...
Click to collapse
http://www.flyme.cn/firmwarelist-10.html#3 download this Version flyme 5.1.9.0A or flyme 5.1.8.0A
The flash see how, if I never guess wrong Q to A no need to do anything just download and flash

Don't work

zaii0007 said:
Don't work
Click to expand...
Click to collapse
Omgggg

Huawei Mate 9 PRO bricked - $50 reward

Hi guys
My LON-L29 Huawei Mate 9 PRO is bricked, kinda. I have twrp on it, but no OS. I can also enter fastboot mode.
I will give $50 to the person who can get the phone working again.
Please feel free to ask me ANYTHING you need to know.
Thank you in advance
/CK
To mod: I know this is the Huawei Mate 9 forum, but I'm desperate for some help here.

Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip

I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.

enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
Thank you, will try
/CK

duraaraa said:
I can help you. Tell me exactly what model you have. LON-L29C432? I need the model information beyond the C.
Click to expand...
Click to collapse
How can I find out since I can't boot it
/CK

Phone is up and running thanks to @CaptainTiiti who gets the $50 reward.
Thank you xda community for your suggestions!
/CK

Can you share his solution? And how did you install twrp on it? I know mate 9 is somehow supported unofficially but not on mate 9 pro.

enzo24754 said:
Here is the firmware. Flashing it in TWRP should be okay. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1367/g104/v68545/f1/full/update.zip
Click to expand...
Click to collapse
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.

apinun_pora said:
I have M9P : LON-L26C636B139 and I've the same problem like Cafe King. I tried using enzo24754's suggestion, but not success. The screen shows " E: unknown command [errno] , update process ended with error : 7 "
May I ask for your suggestion, thank you very much.
Click to expand...
Click to collapse
Same issue here

i think your only hope is reddit.com/r/Funkyhuawei.

I would like to share my experience how I successfully unbricked my Mate 9 Pro (LON-L29C636).
- My M9P was bricked. I've (Raygrobe) TWRP on it, but no OS.
- I tried every methods to flash the firmware but no luck.
- I downloaded C636 offline firmware (MHA-L26C636B110 firmware from Huawei Mate 9 Guides Forum and flash it from SDCard using 3 buttons method by Dload folder with success. My M9P changed to M9 with MHA model. It worked quite well, not much difference from M9P.
- I tried to rebrand to M9P using firmware for LON-L29C636 neither Dload or Firmware Finder method but no luck. The Firmware Finder struck on "Send to updater" menu.
- Someday later, I tried using "System Update" in settings menu. This time it asked if I want to change the model. After I accepted, it started to flash. Finally my M9P get back from brick stage to LON-L29C636B156.
Edit : Actually, in this case you may bring your M9P to Huawei Customer Service Center and ask them to reset your M9P and install the new firmware with no cost.

Honor 8 Lite CN version to nordic?

Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00

MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
You can flash custom ROM..

MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Do you want to debrand to some other region? If so, you need to have oeminfo file of that variant and then download the files for new model and flash but unless you have the oeminfo file you can not proceed further.
It will be the similar process mentioned in my signature for debranding and just a change of respective files

tried
hassanjavaid8181 said:
You can flash custom ROM..
Click to expand...
Click to collapse
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?

crt416 said:
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?
Click to expand...
Click to collapse
You try to flash elite ROM for honor 6x??

No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw

crt416 said:
No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw
Click to expand...
Click to collapse
solve your issue?

No yet, I'm stuck in NRD90M TEST-KEYS

Rommco05 said:
You need to install zip data but I'm not sure if it is a firmware for this phone
Click to expand...
Click to collapse
Problem solved big thanks to @Akam_bad.

crt416 said:
Problem solved big thanks to @Akam_bad.
Click to expand...
Click to collapse
Hi bro i deleted my telegram account now registered again
My id
http://t.me/just_myself_know

MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Saving oem info: do a backup in TWRP. Copy backup to pc or sd.

Twrp backup of pra-la1c185b165
https://mega.nz/#!4bhkRDiA!WPFFffQr17KjgrfoyPn7KHNVbthDHALp54Pgms43jkY

HUAWEI Enjoy 7S (FIG-AL10) rebranding to HUAWEI P Smart (FIG-LX1): feasible? how?

I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.

steveleg said:
I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
I bought the huawei P smart which is the European version of Huawei Enjoy 7s. i think we should wait for a forum to be opened here for this device before we can do anything like unlocking bootloader or Rebranding and rooting.
just be patient bro.

I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.

steveleg said:
I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.
Click to expand...
Click to collapse
But I'm allowed to post the link. The instructions are mine.
https://www.android-hilfe.de/forum/...-smart-how-to-root-root-anleitung.866625.html

ChinHon said:
But I'm allowed to post the link. The instructions are mine.
Click to expand...
Click to collapse
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..

steveleg said:
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..
Click to expand...
Click to collapse
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.

ChinHon said:
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.
Click to expand...
Click to collapse
I just tried, but system.img writing failed.
In the rescue.exe compressed folder it seems that there are two files: system.img and vendor.img.
Is vendor.img to be renamed to cust.img?

Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
Just translated the tuto:
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705

ChinHon said:
Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
I tried to flash from fastboot cust.img and system.img of P Smart on Enjoy 7S but writing failed.
Probably rebrand on this phone involves other partitions or files (oeminfo?) that I'm still not aware of.
I hope a procedure for rebrand will be released soon.
Click to expand...
Click to collapse

@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.

What is the name of your account? (Savvoh)? I'm moderator there.

ChinHon said:
What is the name of your account? (Savvoh)? I'm moderator there.
Click to expand...
Click to collapse
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.

.....

Savvoh said:
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.
Click to expand...
Click to collapse
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:

ChinHon said:
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:
Click to expand...
Click to collapse
Thanks so much, really appreciate the help. I will do so in the future.
Just to confirm what would be the reason to flash and install a TWRP? For dev reasons only?
Or just to remove all the preset Chinese settings?

@ChinHon
Interesting i can install all the services from Google-Installer-v3 onto a Enjoy 7S, but can not open the Play Store or Drive as it just hangs on the loading screen. And never actually goes in.
Haha, im stumped .

Find the current Playstore Apk from the net and install it.
TWRP is necessary for Magisk rooting or to create backups or flash zip`s.
I can't help much with dabranding. I don't know very much about that.

Savvoh said:
@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.
Click to expand...
Click to collapse
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.

steveleg said:
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.
Click to expand...
Click to collapse
I wish i could help,I cant currently even get any Google option on the Enjoy 7S to run. Even trying to add a google account to cloud just freezes. Seems as soon as any Google option is chosen, the Google Services just states "Restarting".
Out of options.

Google services installation was an easy task compared to rebrand.
Download GMS from the link below:
https://mega.nz/#!WqYwyLyD!l7H8WRHBHs0ZwpyE0w2c7n6AvTSpTF29KjjX7_MM2u8
Procedure:
1. Install GMS (it is going to clear all previous google apps and restart the phone)
2. Install google play that I included in the zip file.
Let me know. For me it worked like a charm.