I'm trying to install the oreo update on my phone but I get an error while downloading even if when I check on app it says it's approved for installation. The "systen update" app shows a wrong file size; also when I press "download" it says "download failed" when I use DNS and "Package checksum error" using proxy. Happens the same no matter wich version of the "system update" app I use.
Firmware Finder doesn't work anymore. It says it right there in the app.
devlerr said:
Firmware Finder doesn't work anymore. It says it right there in the app.
Click to expand...
Click to collapse
Wrong, I've managed to update my phone to EMUI 8 today with firmware finder using the proxy method. All you need to do is find a firmware which allows you to do a "Quick Update" (When you go into system update it should say "Quick Update" instead of "Download and install"). From there click quick update and then it should say "Waiting for internet" or something similar. Simply pause the update, go to your internet settings and remove all the proxy information. Then go back and resume your update, it should start downloading
devlerr said:
Firmware Finder doesn't work anymore. It says it right there in the app.
Click to expand...
Click to collapse
They say it continues to work on "older firmware" but what is "older firmware"? Nougat or kitkat?
Lordminer27 said:
Wrong, I've managed to update my phone to EMUI 8 today with firmware finder using the proxy method. All you need to do is find a firmware which allows you to do a "Quick Update" (When you go into system update it should say "Quick Update" instead of "Download and install"). From there click quick update and then it should say "Waiting for internet" or something similar. Simply pause the update, go to your internet settings and remove all the proxy information. Then go back and resume your update, it should start downloading
Click to expand...
Click to collapse
There's no Quick Update FW for me in the FF. Tried them all.
devlerr said:
There's no Quick Update FW for me in the FF. Tried them all.
Click to expand...
Click to collapse
Hmm that's strange, are you using the proxy method or the DNS method and the firmware I've used was the 8.0.0.362.
Lordminer27 said:
Hmm that's strange, are you using the proxy method or the DNS method and the firmware I've used was the 8.0.0.362.
Click to expand...
Click to collapse
I had to use the Auto DNS method, because Proxy method doesn't find any update.
devlerr said:
I had to use the Auto DNS method, because Proxy method doesn't find any update.
Click to expand...
Click to collapse
What's your current build number? maybe devices on newer firmwares won't work
Lordminer27 said:
What's your current build number? maybe devices on newer firmwares won't work
Click to expand...
Click to collapse
B203.
devlerr said:
B203.
Click to expand...
Click to collapse
I was on B187 so maybe that firmware won't support it, theres other ways to update or you could wait until you officially get the update
Related
I have just now returned to origal stock MDB Build Number and now it says in the notification drawer "Device Management, New update postponed" and when i click on it, it does nothing but when i go into settings and try to update it and click on continue update It says at the bottom of the screen "No zfirmware" does that mean that i have to wait awhile till i can update or did something go wrong?
tmac42 said:
I have just now returned to origal stock MDB Build Number and now it says in the notification drawer "Device Management, New update postponed" and when i click on it, it does nothing but when i go into settings and try to update it and click on continue update It says at the bottom of the screen "No zfirmware" does that mean that i have to wait awhile till i can update or did something go wrong?
Click to expand...
Click to collapse
You could return to the AMDL firmware and just skip the update.
My Galaxy S4 GT I9500 is about 1.2 years old and it running on Android 4.2. I tried to update my phone, when I check the update then I found a update of 44.47 mb then I download and installed it then again I check update then again same update is received then I download that and install it and it says error then automatic restart my phone . Whenever I checking update then same update of 44.47 mb is showing what to do ? Help me
No idea if this will help you or not, but why not download the kies software from Samsung and try to upgrade from there?
@Arpitsingh: That's an incredibly old version of Android. Are you looking to update to the absolute latest ROM, namely Android 5.0.1?
I have the same device. Running Stock 5.0.1 . Why don't you flash the stock lollipop firmware via odin[latest version of odin required].You will find the lollipop .MD5 in sammobile.
pericelspalots said:
No idea if this will help you or not, but why not download the kies software from Samsung and try to upgrade from there?
Click to expand...
Click to collapse
Thanks but I tried kies too, but couldn't download
rriyad07 said:
I have the same device. Running Stock 5.0.1 . Why don't you flash the stock lollipop firmware via odin[latest version of odin required].You will find the lollipop .MD5 in sammobile.
Click to expand...
Click to collapse
I tried this way too. After download 283 mb it says that Server error.
Arpitsingh said:
I tried this way too. After download 283 mb it says that Server error.
Click to expand...
Click to collapse
Perhaps its because of your data connection. Switch to another connection . I faced 'Zero' problem downloading firmware from Sammobile. And download directly from Pc I'd suggest
Arpitsingh said:
I tried this way too. After download 283 mb it says that Server error.
Click to expand...
Click to collapse
Try another mirror available at the time of download bhai..
If you're using a download manager:
Be sure to save your login data on your download manager's settings by typing somewhat like this on every column available:
URL: *.sammobile.com
Username: your username
Password: your password
It's recommended too to download via Download Manager so you can resume any interrupted downloads.
Sent from my ASUS_Z00AD
Just got November ota update in 60mb i am just curious to know if it is gonna lock the bootloader.
UPDATE-/ BOOTLOADER STILL UNLOCKED I TESTED & DOWNGRADED TO 5.1.1 OK1 .
I just received it as well. I use my phone for work so it's encrypted but could you try to downgrade and let's us know what happened
Yes, you can still downgrade to 4.4.4 with the new update
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
enian.doda said:
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
Click to expand...
Click to collapse
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
ru_benz said:
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Click to expand...
Click to collapse
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
enian.doda said:
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
Click to expand...
Click to collapse
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Anonymously_Unknown said:
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Click to expand...
Click to collapse
I noticed it said something about gear3 and RCS messaging system. Didn't have time to read the rest of the change log
SelfElevated2 said:
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
With phone ON, connect phone to pc through usb, amart switch will tell you automatically THERE'S AN UPDATE AVAILABLE.
Full rom n910tuvs2epk2
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
murayoshi said:
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
Click to expand...
Click to collapse
Thanks for sharing
Did you tested it ?
Trex888 said:
Thanks for sharing
Did you tested it ?
Click to expand...
Click to collapse
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
murayoshi said:
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
Click to expand...
Click to collapse
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
enian.doda said:
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
Click to expand...
Click to collapse
To get rid of it flash custom recovery.
Trex888 said:
To get rid of it flash custom recovery.
Click to expand...
Click to collapse
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
enian.doda said:
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
Click to expand...
Click to collapse
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
Well, I also used odin until now. The fact that you tell me there's no "working method " assures me that you made your searches like I did and found nothing.
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
I have custom ROM and Custom Recovery TWRP.
Will updating the Modem and Bootloader cause me to have to reinstall the ROMS?
Thanks in advance
Huawei Firmware Finder (Team MT) latest version now lets you update your firmware through proxy server
Important Notes (March 7, 2018)
*This application does not work as it used to. Now the firmware has to be approved for your phone's IMEI for you to be able to flash it. If you try to download and flash an "Unapproved" firmware you will get an "authentication failed" message. Use the application's "Check Firmware Access" and select the "With IMEI" validation option to make sure the firmware update has been approved for your phone.
*Also note that this application has been updated many times since this thread was first created. It now has a new interface and a DNS option to download/flash the firmware updates that was not available before. Just make sure to select the "Instructions" from the application's menu and watch the linked videos.
Changelog
Version 2.1.30.1
Added proxy server for install firmware with new method
Follow their progress at the original Thread: Huawei Firmware Finder (Team MT)
I just used their Android app to update my phone from stock MM to Nougat using the proxy server option. It's like using Charles method but a lot easier.
*Install the app from the Google Play Store.
*Open the app, click on settings, and enable "Installation via system update" and "Via OTA updates".
*Download the Huawei Firmware Finder Proxy app and install it.
*Open the main app window and click on "GET FIRMWARE LIST" and choose the appropriate update from the list.
*Click on "SEND FIRMWARE TO UPDATER".
*Follow the new instructions to get your update.
Note 2: You will better off by choosing the "Download latest full update package" once you get the upgrade notification.
*For those that are "visual learners" I've attached some screenshots.
Note 1: In my case I had to use the "Download latest full update package" from the phone's System update to make it work for me. But your experience could be different and just by clicking on "Check for Updates" might work for you just fine.
Some members have reported that they can't make it to work through their work networks but it works fine through Home networks. Mine didn't work through my VPN though. I used my other phone as a WiFi hotspot to connect my Honor through WiFi. A trick I had to use since i don't have home broadband internet service.
Some helpful quotes:
@i2000s notes on how to successfully force the updates.
More Q&A on page 2: https://forum.xda-developers.com/showpost.php?p=70894417&postcount=11
mirrorman96 said:
Yes it works. 2.38gb download but its currently stuck at 0%
Click to expand...
Click to collapse
thinhster said:
I had to turn off proxy and then restarted the device which seemed to work.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
LaserChicken said:
Worked perfectly for me.
For those having an issue, make sure you aren't trying to simply download the OTA from Firmware Finder. What you want to do is sideload the proxy software, set the proxy, send the OTA, and then run the regular update tool found in your phone's settings. It should pop up with a message about the update, then you can reverse the proxy settings and download the update.
Click to expand...
Click to collapse
This is the easiest, no frills method.
lallolu said:
This is the easiest, no frills method.
Click to expand...
Click to collapse
Yes, it is like you said "no frills method". I think the thread title would've been more catchy if I had used something like "Easier than Charles, get your Nougat Update Now!".
It says the L-19B360 is 1.385 GB, i was wondering if this correct as i have read in other places it is 2.3 GB?
popeye331 said:
It says the L-19B360 is 1.385 GB, i was wondering if this correct as i have read in other places it is 2.3 GB?
Click to expand...
Click to collapse
If you flash the 1.38gb package, you'll find yourself without any apps. Not even a keyboard will be there, so the phone is unusable. Make sure you flash the full 2.38gb package
I just tried it using the ota one and the install failed anyway
Thanks for the guide! But how exactly did you get to the screen that shows "Send Firmware to Updater"? Mine doesn't show such a option. Do I have to configure the proxy first?
I can only find the ota update on 1.3GB
I'm under the impression that if you have a device like the L14, there are no FULL versions of B360, so this won't work. I have tried every OTA in Firmware Finder to no avail. Would love to be proved wrong.
Sweet!! it's downloading the 2.27 GB file right now, I'll update you guys.
Edit: Yep on 7.0 Nougat now. LO4 from 162 MM
popeye331 said:
It says the L-19B360 is 1.385 GB, i was wondering if this correct as i have read in other places it is 2.3 GB?
Click to expand...
Click to collapse
Choose to "Download latest full package" from the phone's update app like I did. It will download the two files needed to complete the upgrade, the update.zip and the update_data_full_hw_xx.zip
mirrorman96 said:
I just tried it using the ota one and the install failed anyway
Click to expand...
Click to collapse
Same happened to me as explained in the OP. Try the "Download latest full package".
untrust_us said:
Thanks for the guide! But how exactly did you get to the screen that shows "Send Firmware to Updater"? Mine doesn't show such a option. Do I have to configure the proxy first?
Click to expand...
Click to collapse
You get that when you enable the "Installation via system update" option and then it asks you to download the proxy application that works together with the firmware finder. Then you go back into the Firmware Finder's main window and click on the "Get Firmware List" tab to choose your firmware to be downloaded. Once you do that it'll take to the "Send Firmware to updater" window. You press that option and don't press back just press the phone's home button and go to settings/system update. Instead of choosing the OTA choose to download the "Download latest full package" instead.
hoseth0711 said:
I can only find the ota update on 1.3GB
Click to expand...
Click to collapse
Like I said above, pick the "Download latest full package".
mweich said:
I'm under the impression that if you have a device like the L14, there are no FULL versions of B360, so this won't work. I have tried every OTA in Firmware Finder to no avail. Would love to be proved wrong.
Click to expand...
Click to collapse
Like I said above, pick the "Download latest full package" instead. It will download the update.zip and the update_data_full_hw_xx.zip.
Yes it works. 2.38gb download but its currently stuck at 0%
mirrorman96 said:
Yes it works. 2.38gb download but its currently stuck at 0%
Click to expand...
Click to collapse
I had to turn off proxy and then restarted the device which seemed to work.
thinhster said:
I had to turn off proxy and then restarted the device which seemed to work.
Click to expand...
Click to collapse
Yeah I tried it before you said. Its downloading now
The size of update in my phone is 2.23 gb is normal size??????
Muhanned said:
The size of update in my phone is 2.23 gb is normal size??????
Click to expand...
Click to collapse
Yes I believe that is correct. My one was 2.38gb but I have the l09
mirrorman96 said:
Yes I believe that is correct. My one was 2.38gb but I have the l09
Click to expand...
Click to collapse
I have FRD-L09C185
Muhanned said:
The size of update in my phone is 2.23 gb is normal size??????
Click to expand...
Click to collapse
Yes, it is normal. It includes the 1.39Gb of the update.zip and like 0.88Gb of the update_data_full_hw_xx.zip. Note that the size of the files may vary depending on your phone's specific update package.
Mine was 2.27GB in size for the FRD-L14 USA model.
hoseth0711 said:
I can only find the ota update on 1.3GB
Click to expand...
Click to collapse
Had that one too but you have to go to menu on the updater and choose the "download the latest full package "option and it will appear
Thanx man the update has been finish without any problems but i notice that there is issue is that the power save isn't found in the state bar only ultra
Hi, my number model its l23 and compilation numer its VNS-L23C605B120. So my phone dont upgrade anymore by OTA. Which are the steps to make the upgrade manually with a firmware?
Thanks.
Trunksleo said:
Hi, my number model its l23 and compilation numer its VNS-L23C605B120. So my phone dont upgrade anymore by OTA. Which are the steps to make the upgrade manually with a firmware?
Thanks.
Click to expand...
Click to collapse
Hey !
have you read other posts before requests for help ?
There are a lots about.
Use Huawei Firmware Finder app to try to upgrade, go for B362 FULL OTA MF PV first
and if don't succeed try with B362 FULL OTA MF one.
All the info are inside the app.
Upgrade manually should be possible with Meticulus TWRP v4,
but it is very dangerous because of bricks, and i don't reccomend you to do, but
phone is yours and if you don't succeed with FF you could give a try... (be carefull)
Good luck ! :fingers-crossed:
Cheers
Dadditz said:
Hey !
have you read other posts before requests for help ?
There are a lots about.
Use Huawei Firmware Finder app to try to upgrade, go for B362 FULL OTA MF PV first
and if don't succeed try with B362 FULL OTA MF one.
All the info are inside the app.
Upgrade manually should be possible with Meticulus TWRP v4,
but it is very dangerous because of bricks, and i don't reccomend you to do, but
phone is yours and if you don't succeed with FF you could give a try... (be carefull)
Good luck ! :fingers-crossed:
Cheers
Click to expand...
Click to collapse
Yes i read a lot stuff but i tried somes methods from here but i cant make the upgrade. For example yesterday i tried with the app of huawei firmware and i use the dns method, downloading the upgrade and then when its going to install fails at 1% and i have to reboot the phone. I dont know what its happening. Also i tried to instal manually with the dload carpet method and also reach to 5% of the upgrade and fails.
Trunksleo said:
Yes i read a lot stuff but i tried somes methods from here but i cant make the upgrade. For example yesterday i tried with the app of huawei firmware and i use the dns method, downloading the upgrade and then when its going to install fails at 1% and i have to reboot the phone. I dont know what its happening. Also i tried to instal manually with the dload carpet method and also reach to 5% of the upgrade and fails.
Click to expand...
Click to collapse
Well, dload method won't work to upgrade to android 7.
Try the versions i suggested you.
Follow correctly the procedure inside the app,
try with vpn method.
Select the update, verify it with your imei and launch the download.(edited)
Look inside your inbuild updater if an update is offered.
If yes download till 5% and press pause. Now stop vpn, then continue with inbuild updater.
You should be able to upgrade..
edit: verify the update with imei and select the method (vpn)
Dadditz said:
Well, dload method won't work to upgrade to android 7.
Try the versions i suggested you.
Follow correctly the procedure inside the app,
try with vpn method.
Select the update, verify it with your imei and launch the download.(edited)
Look inside your inbuild updater if an update is offered.
If yes download till 5% and press pause. Now stop vpn, then continue with inbuild updater.
You should be able to upgrade..
edit: verify the update with imei and select the method (vpn)
Click to expand...
Click to collapse
By vpn i download the version 362 but when the phone its going to install fails at 1%.
Then i tried the dload carpet (put inside the carpet META INF and the archives full_mainpkg.tag and update.app), then i dial *#*#2846579#*#* and i upgrade sd. When its installing fails at 5% like the pic attached.
Trunksleo said:
By vpn i download the version 362 but when the phone its going to install fails at 1%.
Then i tried the dload carpet (put inside the carpet META INF and the archives full_mainpkg.tag and update.app), then i dial *#*#2846579#*#* and i upgrade sd. When its installing fails at 5% like the pic attached.
Click to expand...
Click to collapse
Damn... are you full stock ? do you switched between roms ?
Maybe your current firmware aren't able to upgrade
and need an intermedie firmware such as this one - VNS-L23C605B120CUSTC605D126
(i think is for dual sim but not sure, check with imei first and really don't know if will work).
If let you update to this firmware you should look forward for android 7.
Dadditz said:
Damn... are you full stock ? do you switched between roms ?
Maybe your current firmware aren't able to upgrade
and need an intermedie firmware such as this one - VNS-L23C605B120CUSTC605D126
(i think is for dual sim but not sure, check with imei first and really don't know if will work).
If let you update to this firmware you should look forward for android 7.
Click to expand...
Click to collapse
Thats the version i have installed VNS-L23C605B120CUSTC605D126. I check with imei and the B362 FULL OTA MF PV and its ok to install. When i use VPN mode offer to download the version you said, b362 (456mb), when its going to install also fails at 2%.
The phone its not unlocked o rooted, i dont know if thats the problem.
Trunksleo said:
Thats the version i have installed VNS-L23C605B120CUSTC605D126. I check with imei and the B362 FULL OTA MF PV and its ok to install. When i use VPN mode offer to download the version you said, b362 (456mb), when its going to install also fails at 2%.
The phone its not unlocked o rooted, i dont know if thats the problem.
Click to expand...
Click to collapse
Size should be around 2 gb. Choose that version... VNS-L23C605B362 full ota mf pv or full ota mf, both (2.01gb)
Dadditz said:
Size should be around 2 gb. Choose that version... VNS-L23C605B362 full ota mf pv or full ota mf, both (2.01gb)
Click to expand...
Click to collapse
Yes, but which method?? I go to the app, put get an update through DNS of that version you said, then put Auto DNS, go to the updater and it dowload me the version of 456mb (B362) when finish to download, reboot and fails to install at 2%.
Also i download the update.app from that version, put *#*#2846579#*#* and i upgrade sd. When its installing fails at 5% like the pic attached before.
I dont know why its keeps failing.
Dadditz said:
Size should be around 2 gb. Choose that version... VNS-L23C605B362 full ota mf pv or full ota mf, both (2.01gb)
Click to expand...
Click to collapse
Thanks a lot for the info. Good news i made an upgrade to the version you said. Now im want to keep upgrading to new versions. So what are the next steps? If i go to upgrade of the phone its tells me that there are no new updates and if i make the update with hfw i download the same version that i install
Trunksleo said:
Thanks a lot for the info. Good news i made an upgrade to the version you said. Now im want to keep upgrading to new versions. So what are the next steps? If i go to upgrade of the phone its tells me that there are no new updates and if i make the update with hfw i download the same version that i install
Click to expand...
Click to collapse
So you did it ? Yeahh that's a good new !!
Dude update the same way you already done with FF. Try with latest rom...
In FF, in search tab type only VNS-L23C605 and you'll see all the available firmwares.
Select B394 FULL OTA MF (2.07gb size), use the vpn method, register and use inbuild updater.
As i can see this should be the latest fmw for your device with july 2018 security patch.
The other way to update is using Huawei Recovery Updater, you easily find here on XDA,
but you need to unlock the bootloader and install a custom recovery. Better use FF directly.
Cheers
Dadditz said:
So you did it ? Yeahh that's a good new !!
Dude update the same way you already done with FF. Try with latest rom...
In FF, in search tab type only VNS-L23C605 and you'll see all the available firmwares.
Select B394 FULL OTA MF (2.07gb size), use the vpn method, register and use inbuild updater.
As i can see this should be the latest fmw for your device with july 2018 security patch.
The other way to update is using Huawei Recovery Updater, you easily find here on XDA,
but you need to unlock the bootloader and install a custom recovery. Better use FF directly.
Cheers
Click to expand...
Click to collapse
I keep repeting the sames steps but the updater from the phone dont show me updates to make
Trunksleo said:
I keep repeting the sames steps but the updater from the phone dont show me updates to make
Click to expand...
Click to collapse
Maybe you're missing somethings...
Try with another package like B392 full ota mf...
Dadditz said:
Maybe you're missing somethings...
Try with another package like B392 full ota mf...
Click to expand...
Click to collapse
I tried a lot of versions but dont download. All said that its the last version.
I g to ff, choose the version, put download dns and activate the vpn. Then go to the updater and nothing happens.
Trunksleo said:
I tried a lot of versions but dont download. All said that its the last version.
I g to ff, choose the version, put download dns and activate the vpn. Then go to the updater and nothing happens.
Click to expand...
Click to collapse
Check this Youtube video.
If even can't make an update you can still use one of the HWOTA methods
or use Huawei Recovery updater, you find all here on XDA.
Best regards