Related
Hi,
I "recently" bought a S5 (G900F).
My car hifi supports MTP, so I in theory it should work fine with my S5.
That isn't so far of, since I can access music on my phone, but, sadly, not on its 64GB SD card, where I store my music.
I wondered which one was at fault, my car hifi, or my mobile. Searching the web, didn't give me any answers.
Where do you ask for help, if it isn't clear where the problem originates from?
Right when I was about to give up, my wife plugged in her S4 mini, and it worked fine!
Now it's bugging me, again.
I checked the Android version (both are 4.4.2), the settings (both have developer settings enabled). The only difference I could find is the kernel version.
Does anyone have an idea what I need to do, to be able to access my SD card with my car hifi?
Thanks in advance.
P.S.: Just to make it clear, I don't want to use AUX or Bluetooth, since both require interaction with my mobile, if I want to change the playlist. This can be quite expensive, in my country. MTP can be controlled by the car hifi.
P.P.S.: Using the phones storage for music would work, but would make the 64GB SD a waste of money.
Hi,
i install Rom of Malaysz of 11 - 12-2015 and i have some stupid doubts ....sorry i am newer on this.
1 - When i remove ACC signal the bluetooth pairing goes down and when i turn it on again the bluetooth pairing still down. Need go to bluetooth application and do the pairing manually......not good idea....I have a Samsung S4 and my equipment is a Car DVD to Ford Focus with rk3188 and android 4.4.4.
2 - Can anybody explain me how to works the installed application head Unit.. That just have two line and says it was ON but i dont know how it works .....sounds like it was good but i dont see nothing yet
3 - In my connections i dont have output to subwoofer. Anybody knows how to fix this?
4 - In my canbus cnnected to Ford Focus when i turn the car off all goes off except the engine. Any guy knows how to fix this?
5 - Anybody knows a good application to read with bluetooth SMS and Music from mobile phone.
Sorry to bother you. I dont want send the car dvd to the waste
Thanks in advance
Francisco
kiko4949 said:
Hi,
i install Rom of Malaysz of 11 - 12-2015 and i have some stupid doubts ....sorry i am newer on this.
1 - When i remove ACC signal the bluetooth pairing goes down and when i turn it on again the bluetooth pairing still down. Need go to bluetooth application and do the pairing manually......not good idea....I have a Samsung S4 and my equipment is a Car DVD to Ford Focus with rk3188 and android 4.4.4.
Click to expand...
Click to collapse
Do you just need to "reconnect" the device or do you need to "pair" it again?
No idea about your other questions, some of them I don't understand (sorry).
You can also try the rom by booroondook which is the one I am using. Working very well for me.
http://forum.xda-developers.com/android-auto/mtcb-software-development/rom-fuse-support-t3274272
carbonad said:
Do you just need to "reconnect" the device or do you need to "pair" it again?
No idea about your other questions, some of them I don't understand (sorry).
You can also try the rom by booroondook which is the one I am using. Working very well for me.
http://forum.xda-developers.com/android-auto/mtcb-software-development/rom-fuse-support-t3274272
Click to expand...
Click to collapse
Hi,
thanks by your reply.
I need reconnect it again.
I try that image also but happens the same.
Hi Forum,
yesterday i started playing around with my new head unit. I got a great help from typos1, i want to thank him again for all he has done! First, i updated my MCU to 2.91. This worked withaout any problems. After that i flashed the custom rom from Malaysk. In my opinion he did a great work BUT for me, everything was a bit slower, everything looked not that harmonic. I decided to install Booroondook's custom rom. What should i say: works like a charm! Absolutely brilliant! Looks amazing and works quite fast!
The Details about my Unit:
Naviskauto C0255 - MTCC KLD6 v2.91/ - RK8133
There are a few questions now and i hope you can help me...
1. 3G Stick
At the moment, the HU gets internet from my smartphone peria z5 compact. I tried to connect a Huawei surfstick in one of the two cables "3G/USB", nothing happens. I tried to connect a 1and1 MT10 surfstick, same same... I've read from other users that they successful connect 1nad1 surfsticks out of the box. Do i have to start the stick somewhere?
I ordered this one now, specially designed for my unit:
https://www.amazon.de/gp/product/B0192YOBLI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I hope this one will work. If not, my idea is to set up a Accesspoint in my car and let the unit connect to this AP. I also ordered this one:
https://www.amazon.de/gp/product/B00634PLTW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I don't want to use my smartphone as access point for different reasons. Do you have any idea?
2. Microphone
The unit has a build in microphone ANS a 2,5 jack for external Mic. The build in microphone is absolutely bull****, i am not able to have phone calls, no one understands me. If i connect the external mic, nothing happens. I've read a lot of stuff about the mic problems and if i got it correctly, there is no chance to stop the internal mic... and as long as it isn't stopped, the external will not work. Some wrote that they work BOTH TOGETHER but this is wrong! One solution is, as far as i understood what i read, to open the unit and cut off the red wire from the internal mic. When cutted of, the external should work. Can someone confirm this? If yes, is there no chance to say android to stop the internal mic?
I ordered this one:
https://www.amazon.de/gp/product/B00XL1VLJY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Its a stereo mic, i hope this will work one day at the jack port of the unit because originally there was a mono mic included in the package.
3. Buttons and illumination
My buttons do not glow in the dark! I can go to settings and choose a button color but when i push on a color, the buttons on the left only work for 2 seconds. Even if i press on "save" after choosing, the buttons do not glow. Does anyone has an idea? The buttons should always glow! Did i miss to connect a cable?
I hope anyone can help me with those 3 questions... Would be great. Sorry, i am an absolutely beginner and im so glad to have this forum. Even sorry if anything is already answered and i did not found it...
Thanks a lot!
Greetings, Mirko
PS: I want to say a special thanks to Booroondook. It's amazing how people sacrifice time for others!
Theres a solution for the poor mic in the MTCB hardware mod section.
In the wiki (in my signature) theres a guide for 3G dongles.
Go into settings/factory settings (password 126) and tick the box to turn on the LEDs.
OK, i don't have the USB Stick with me but i will try tomorrow.
I cant' find a thread concerning the microphone hardware mod, the search function does not work here. Do you have a link?
The LED's work now
Thanks
Seichobob said:
OK, i don't have the USB Stick with me but i will try tomorrow.
I cant' find a thread concerning the microphone hardware mod, the search function does not work here. Do you have a link?
The LED's work now
Thanks
Click to expand...
Click to collapse
Its here :
http://forum.xda-developers.com/android-auto/mtcb-hardware-development
Joying JY-VOS01N4GS w/ an SC-9853i 1.8GHz Octa-core, installed in a 1991 Toyota MR2 with a Honda K24A2 turbo engine swapped into it, controlled by an ECU called a Hondata KPro V4.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143309152617
I can install and run Hondata or RealDash apps on the stereo without issue, but I can't get it to connect to the ECU itself so I'm looking for suggestions. I've got a $20 no name tablet or a 7+ yrs old Samsung Note 3....all connect to the KPro without issue. Hondata, RealDash and Torque apps all connect without issue on the tablet or phone. New $350+ stereo...keeps giving me failed to connect error.
I'm open to rooting if needed, installing a different Bluetooth app, I have the pin to access developer options, etc....I just need it to connect and work.
m5james said:
Joying JY-VOS01N4GS w/ an SC-9853i 1.8GHz Octa-core, installed in a 1991 Toyota MR2 with a Honda K24A2 turbo engine swapped into it, controlled by an ECU called a Hondata KPro V4.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143309152617
I can install and run Hondata or RealDash apps on the stereo without issue, but I can't get it to connect to the ECU itself so I'm looking for suggestions. I've got a $20 no name tablet or a 7+ yrs old Samsung Note 3....all connect to the KPro without issue. Hondata, RealDash and Torque apps all connect without issue on the tablet or phone. New $350+ stereo...keeps giving me failed to connect error.
I'm open to rooting if needed, installing a different Bluetooth app, I have the pin to access developer options, etc....I just need it to connect and work.
Click to expand...
Click to collapse
It will not pair. Joying (actually FYT/SYU) crippled the bluetooth on their units. You can only pair with phones and a few OBD and TPMS BT devices.
For the rest: nothing.
And that is done onto the lowest compiled level including the MCU. Other drivers/apps/kernels/whatever will not work.
I've been writing Joying and they offered to sell me their OBDII dongle at a discount. I explained to them shortly before writing this post that the car doesn't have an OBDII port since it's a 91, lightly explained the engine sway, but I haven't heard anything yet. Why would they go through all that effort...just to force us to buy their $15 OBDII dongle?
What about universal Bluetooth dongle plugged into one of the USB cords? Or maybe even USB to USB? The ECU has a USB port that I use when I connect to my laptop to run KPro Manager (a Windows PC based program) and the RealDash app on Android does give me the option of Bluetooth, USB or serial input. I'm currently monitoring from this tablet which is completely illegible while driving, needs to be manually powered on/off and then reconnected to Bluetooth...not being able to see the gauges on a much larger screen and automatically reconnect when I start the car crushes EVERY reason why I bought this stereo. There's gotta be a way.
Wrote a long reply, stupid token expired...I'm gonna try this.
https://www.hondata.com/forum/viewtopic.php?t=18829
Bluetooth dongle didn't work, but I can't confirm if it's a dongle issue since I can connect to it but then the Hondata app says "Ignition not on" when it is. Nevertheless today I played around with the GF's cwr who has a Joying JY-HOS02P4 screen in hers, it's only 3 months old, and it'll connect to my Hondata just fine! Would it be as simple as taking the Bluetooth APK from her car and installing it on mine?
Bump for help...there's gotta be a way :/
Bumping again, hoping maybe someone can help.
Following - need this for ECUTEK bluetooth adapter in my GTR, otherwise the screen is worthless...
m5james said:
Bumping again, hoping maybe someone can help.
Click to expand...
Click to collapse
Like mentioned a couple of posts above. Joying crippled Bluetooth and there is simply no "normal" bluetooth stack.
You cannot alter the current BT app as it won't be signed correctly anymore and it will not even be visible anymore.
You cannot add another BT app as that will not have the correct signing either.
Your question is not new. This BT "not being able to pair" is already an issue since 2016. You would be the first to find a solution.
The only thing you can try is what I described in this post, based on info from ojuniour.
Having said that: you should also search the rest of the forum and not only stick to your own question. Otherwise you might already have tried what I described. It might work, it might not.
Surfer, thank you so much for the reply. I've read in depth and was fearful of that, but will try what is in the thread you linked. If you'd be so kind, couple questions that you may have answers to:
- I have a sofia 9853 with android 8.1 (upgrading to 9.0), does that make things better worse or same for the bluetooth situation?
- I've seen some talk on much older threads of using Comfast® CF-WU725B as an external/usb bluetooth solution? Did this (or an alternative dongle) ever or does it still work?
- I've also seen talk of used xposed modules to add bluetooth devices to the whitelist - is there any truth to this?
Surfer, thanks in advance, this is for a tesla screen in a GTR. By removing the stock screen we lose a ton of critical info that can only be gotten back through ecutek, which currently only has a bluetooth solution for android.
M5James - sorry for hijacking your thread, but hopefully this helps you as well
xadamadax said:
Surfer, thank you so much for the reply. I've read in depth and was fearful of that, but will try what is in the thread you linked. If you'd be so kind, couple questions that you may have answers to:
- I have a sofia 9853 with android 8.1 (upgrading to 9.0), does that make things better worse or same for the bluetooth situation?
- I've seen some talk on much older threads of using Comfast® CF-WU725B as an external/usb bluetooth solution? Did this (or an alternative dongle) ever or does it still work?
- I've also seen talk of used xposed modules to add bluetooth devices to the whitelist - is there any truth to this?
Click to expand...
Click to collapse
1. There is no Sofia 9853. There is a Intel Sofia AND an Intel SC9853i. Those are 2 different CPUs needing different ROMs.
2. No idea. Like mentioned: an external BT dongle has not worked till now, but I have never heard of that Confast one.
3. Xposed is not supported on the 9853i. Not on Android 8.1 and neither on 9.0
@surfer63, thank you again, your thread here (https://forum.xda-developers.com/an...qa-tips-info-roll-joying-fyt-sc9853i-t3979377) helped me tremendously
@m5james, on a whim i plugged in ecutek to usb via the usb mini port, and shockingly there is support for it. Maybe try the same with Hondata if there is an sort of interface on it.
surfer63 said:
Like mentioned a couple of posts above. Joying crippled Bluetooth and there is simply no "normal" bluetooth stack.
You cannot alter the current BT app as it won't be signed correctly anymore and it will not even be visible anymore.
You cannot add another BT app as that will not have the correct signing either.
Your question is not new. This BT "not being able to pair" is already an issue since 2016. You would be the first to find a solution.
The only thing you can try is what I described in this post, based on info from ojuniour.
Having said that: you should also search the rest of the forum and not only stick to your own question. Otherwise you might already have tried what I described. It might work, it might not.
Click to expand...
Click to collapse
Fair enough...honestly like 10 +/-yrs ago I was WAY more into custom ROMs, baking, etc etc but nowadays I feel like it's over my head again. The only reason why I asked about using other BT versions from other Joying devices is because the GF's similarily aged stereo was able to connect, but I understand the signing thing since our two stereos don't share the same OS and CPU.
xadamadax said:
M5James - sorry for hijacking your thread, but hopefully this helps you as well
Click to expand...
Click to collapse
You're fine, the more exposure the merrier...I'm not as good at this stuff as I used to be so I'm just hoping someone smarter than me can help
xadamadax said:
@surfer63, thank you again, your thread here (https://forum.xda-developers.com/an...qa-tips-info-roll-joying-fyt-sc9853i-t3979377) helped me tremendously
@m5james, on a whim i plugged in ecutek to usb via the usb mini port, and shockingly there is support for it. Maybe try the same with Hondata if there is an sort of interface on it.
Click to expand...
Click to collapse
Do you have a pic of how you physically hooked it up? I haven't touched much on this subject since my original post and honestly don't recall the connections at the moment but I do recall mine having a square port (I don't know it's official name) that allows me to connect via USB to a laptop. I think I even tried connecting directly to the stereo that way but no luck.
Hondata runs on the screen easily in both portrait and landscape mode but I prefer RealDash, which at doesn't like portrait mode...I'm hoping it's something I can adjust to fit myself since RealDash allows for customisable gauges.
@m5james that is a micro usb port you have, try connecting it to a usb port on the head unit (same way you would a laptop) and open your hondata app - with any luck you'll be in business. If one port doesn't work, try the other - good luck
If you guys want to use the bluetooth pairing with basically about anything then buy the "Stop" brand. Unit actually confess with 2 BT models. One for music and phone call, the other one is located in the android bluetooth setting that would enable you to pair with anything.
ojuniour said:
If you guys want to use the bluetooth pairing with basically about anything then buy the "Stop" brand. Unit actually confess with 2 BT models. One for music and phone call, the other one is located in the android bluetooth setting that would enable you to pair with anything.
Click to expand...
Click to collapse
I looked on eBay for "stop android DIN" and nothing comes up.
m5james said:
I looked on eBay for "stop android DIN" and nothing comes up.
Click to expand...
Click to collapse
lol my bad I mean Atoto.. Damn auto correction.
here is an example of one connecting to ecuTek obd bluetooth:
https://www.ft86club.com/forums/showthread.php?t=141515
xadamadax said:
@m5james that is a micro usb port you have, try connecting it to a usb port on the head unit (same way you would a laptop) and open your hondata app - with any luck you'll be in business. If one port doesn't work, try the other - good luck
Click to expand...
Click to collapse
Wait wait wait. Wait a minute.... Are you saying you are able to get the ecuTek OBD bluetooth to work in wired mode[ to the head unit] without connecting to it wirelessly through bluetooth?
And you are using the ecuTek App?
I have just purchased for my Mazda 3 2014 base model a Sino Smart t18 Android head unit. It took a lot of wire runs to get all my buttons on my steering wheel to work and my aux cable to work but I have everything working now. However I cannot get Android Auto to work. I'm connected via cable I go to T-Link it goes through the whole connection process then the app closes and I disconnect. Also in calls there is a literal half second to two second delay between me saying something and the other person hearing something. I believe that to be because the dialer and phone app is an ancient one. Before I upgrade via the Sino Smart firmware assuming that they even have a newer version for it I'd like to know a few things. Are there any fixes for the issues I have? Is there generic firmware I could use and would that be better? I've backed up the APKs and the settings on a flash drive and I'm going to get a firmware from Sino Smart probably today. So I'm not too concerned about reflashing it if such a firmware exists. Here is the relevant links and pictures https://m.aliexpress.com/item/3256801101474736.html?browser_id=72dbac67959e473f86942b305e5c0eff&aff_trace_key=6c41050821be49718de2504f98805203-1662686844295-00677-UneMJZVf&aff_platform=msite&m_page_id=0011831fdd3c4c1d26c057b1ad56416c1c5e891039&gclid=&[email protected][email protected]!12000028949398123!sea&curPageLogUid=POsYIGiN6GMX&algo_pvid=9f563e5a-cc76-4caf-a8d7-20b80d9e9ed2
Here is a google drive with the dump from the unit
Ts18 Sinosmart dump - Google Drive
drive.google.com
The firmware that they gave me was for a TS-10 and I'm not sure that's going to be compatible with what I have. Does anybody know?
Also USB DAC, can I use that or no?
Hello. We have the same hardware as you. TS18 8581A (TopWay) 4GB+64GB
AK7604
QN8035
Android 11 (Possibly Fake).
Fake Device Test application does not work.
Android Auto Exits the App when the connection is made. But it continues to work immediately after re-entering the application.
I am not satisfied with the Bluetooth Phone call either. I hope there is a solution. I've been watching your thread. Do you have an external microphone? I think it might be a problem with the built-in microphone.
By the way, what does a USB DAC do? (Translate Google)
These units are garbage.
iskenderr said:
Hello. We have the same hardware as you. TS18 8581A (TopWay) 4GB+64GB
AK7604
QN8035
Android 11 (Possibly Fake).
Fake Device Test application does not work.
Android Auto Exits the App when the connection is made. But it continues to work immediately after re-entering the application.
I am not satisfied with the Bluetooth Phone call either. I hope there is a solution. I've been watching your thread. Do you have an external microphone? I think it might be a problem with the built-in microphone.
By the way, what does a USB DAC do? (Translate Google)
Click to expand...
Click to collapse
A USB dac is a way to get digital audio out from the head unit. This way it sounds a lot better. I'm running my own external amplifier. Yeah mine's actually legit and lets me run that fake test stuff, I suspect you're running Android 10 if they're stopping you from checking. That's kind of why I want to see if there's firmware out there for like there is for the TS-10s. As for an external microphone I'm using this Sujeetec Pro Lavalier Microphone... https://www.amazon.com/dp/B08Z3LV1FG?ref=ppx_pop_mob_ap_share
marchnz said:
These units are garbage.
Click to expand...
Click to collapse
That may be the case but for $400 or less there's just not much out there for my car. If I had the Bose system then I would have been fine but the non Bose there's only just now coming on to the market other decent options. However all of them are basically just variations of this unit. I know there's a ton of firmware out there for the TS-10s so I'm just wondering if there's one for the TS-18s
FriedTM said:
USB dac, dijital sesi ana üniteden çıkarmanın bir yoludur. Bu şekilde kulağa çok daha iyi geliyor. Kendi harici amplifikatörümü çalıştırıyorum. Evet, benimki aslında yasal ve bu sahte test şeylerini çalıştırmama izin veriyor, kontrol etmenizi engelliyorlarsa Android 10 çalıştırdığınızdan şüpheleniyorum. Bu yüzden TS-10'larda olduğu gibi orada bir ürün yazılımı olup olmadığını görmek istiyorum. Harici mikrofona gelince, bu Sujeetec Pro Yaka Mikrofonunu kullanıyorum... https://www.amazon.com/dp/B08Z3LV1FG?ref=ppx_pop_mob_ap_share
Click to expand...
Click to collapse
HU'nun arkasında harici bir amplifikatör çıkışı vardır. Sağ ön sol ve subwoofer için. Sanırım arka sol ve sağ çıkışı da var. Ama bir soket kablom yok (C3-C4 pin). (Google Çeviri)
iskenderr said:
HU'nun arkasında harici bir amplifikatör çıkışı vardır. Sağ ön sol ve subwoofer için. Sanırım arka sol ve sağ çıkışı da var. Ama bir soket kablom yok (C3-C4 pin). (Google Çeviri)
Click to expand...
Click to collapse
This is true but the output levels are only 1.5 volts and the sample rate and audio quality is not amazing. A usb dac will bring better audio than the inbuilt chip as well as provide higher voltage. Also these do not have rear output so you have to use a line level converter which sucks because mine pops and crackles at above 70% volume.
All right I got some codes for this unit. Thanks to Vista2611
Factory - 123456
developer mode - 7890(**). (**) is your current time in military time. example ..if u try it at 3.00pm just key in 789015. Or if it's 3am it's 789003
FriedTM said:
All right I got some codes for this unit. Thanks to Vista2611
Factory - 123456
developer mode - 7890(**). (**) is your current time in military time. example ..if u try it at 3.00pm just key in 789015. Or if it's 3am it's 789003
Click to expand...
Click to collapse
Hello Fried, Hi All
I have TS18 too not exactly the same I think... For tl link can you give the version of tl link?
For the call problem, I don’t have good new... I have exactly the same issue...
For detail (#my story) I bought this unit 6 month ago... everything works correctly except call issue... I exchange with the vendor since the beginning to work around… He made me lot of this update reset etc…. Nothing works… one time after reset I lose some functions (TLink, button on the screen of the unit… he give me new version of tlink (1.8.9)) … brief after 6 months nothings works to solve the call issue. So the vendor send me a new mainboard. New version of Tlink (nice!!) but the call issue is exactly the same….
Now I bored, I will use it like that I think. In addition, I think this problem is due to the design of the board…
Ha, for Tlink at the beginning it was in version 1.6.9. It work pretty good to connect etc. after the big reset he give me version 1.8.9., in this version I have to execute two time the connection to the screen android auto…
Now with the new version it seem work correctly, I have to do some test. I have installed the board just this weekend… idem for the number of version
PS IF YOU FIND A WAY TO SOLVE call issue, PLEASE share it…
I bought Simcard + microphone harness from Aliexpress. They stated that my voice sounded good when calling directly from HU with a sim card. They also stated that their own voice echoed. I think in this case there may be a problem with the Bluetooth interface. I ordered an external microphone. I'm going to try how the sound will be with the external microphone. I installed a macrodroid drawer on the HU device for speed dialing, and I was satisfied as a quick search and a mapped screen split. I'll be glad when the volume down problem is solved.
By the way, does anyone know the steps to add eSim?
https://tr.aliexpress.com/item/1005003193847464.html?spm=a2g0o.order_list.0.0.ba473d126wka2q&gatewayAdapt=glo2tur
I haven't solved the problem but I have opened it up and discovered that it may be TS10 firmware compatible. I've also noticed that these boards are standardized so you may be able to just buy a standalone board like this one that is compatible with TS-10 which is a much more mature system
US $36.09 | TOPWAY TS7 T3L TS18 T5 TS10 T507 Motherboard PCB PCBA Main Board Built in Android
https://a.aliexpress.com/_mrQ34oy
Edit: I confirmed that they are compatible. I'm just going to the TS-10. Wash my hands of this problem.
https://en.proauto.co.il/zeta-ts18
Found this probably going to give it a try
FriedTM said:
https://en.proauto.co.il/zeta-ts18
Found this probably going to give it a try
Click to expand...
Click to collapse
I will try if I have enough time…
However, to be clear. I am pretty sure the problem is not on the Bluetooth. I have tried to runs an app like WhatsApp directly on the unit. The unit was connected by wifi on the house. And I observed exactly the same delay… In addition, to complete the vendor send me an application to update some parameter in the Bluetooth configuration (gocsdk) it doesn’t change anything n delay…
I installed this link from the manufacturer but I would not recommend. It is set to the wrong display resolution (1280 by 480) and I cant change it because it I cant press half the settings screen as it is out of view. Goin to try the other software next. Also this one from the manufacture seems to state it is android 12 and I am 90% sure it is not. very sketchy.
Edit: Do not do any of these installations without a backup. Otherwise you may mess up your machine. You need to back up your APKs and all your settings they're going to be in the factory settings I believe I'm going to make an instructional once I confirmed this worked
So you succed to install? And delay on call is the fixed?
For information during the six months of exchange with vendor, he maid me several update. on time he send a new system update like this one... And result for delay in call was the same...
I am not sure to understand if you avec succed to install? If you wan't I can share the latest version that he send me before send me back a new main board...
e-xenon said:
So you succed to install? And delay on call is the fixed?
For information during the six months of exchange with vendor, he maid me several update. on time he send a new system update like this one... And result for delay in call was the same...
I am not sure to understand if you avec succed to install? If you wan't I can share the latest version that he send me before send me back a new main board...
Click to expand...
Click to collapse
I did eventually get the install to work and it helped but its caused a bunch of other problems with audio quality and strangely enough google maps wont open. The delay went from 1-2 seconds to about .5 of a second call delay :/ these ts-18s are just ts-10s with a bunch of cost savings. Just trash, I am jumping ship and you should too. Just buy a ts-10 from the link I gave you and it will be a drop in replacement for the ts-18 you have. Also yeah post the update maybe someone else will find use for it The big issue with the install and what took me so long was that the dpi was set to 240 when it needed to be set to 140. This made the whole experience a pain because half of the options in the settings menu where unreachable. I had to enable engineering mode and go to the built in abd app (you can connect your laptop and do this remotely as well) and type in "adb shell wm density 140". here is a Link to get you started.
If ur Microphone dont work well in TS18 u should:
Turn Off Listening in Voice Assistent Google.
This work for me and now i can Call with no problem
Hi
I have ts18 headunit and I did factory reset and I lost all my apps someone have backup or someting for I can have back my apps. And now I can't use tlink so I don't have android auto anymore. If I download tlink apk and install it I can't activate. I find other way to use android auto name is android headunit reloader it's working but is complicate to start like always need to go to my phone settings and start headunit server after this working fine but I don't want do this always when I want use android auto. Someone know something better apk for android auto?
Fishme92 said:
Hi
I have ts18 headunit and I did factory reset and I lost all my apps someone have backup or someting for I can have back my apps. And now I can't use tlink so I don't have android auto anymore. If I download tlink apk and install it I can't activate. I find other way to use android auto name is android headunit reloader it's working but is complicate to start like always need to go to my phone settings and start headunit server after this working fine but I don't want do this always when I want use android auto. Someone know something better apk for android auto?
Click to expand...
Click to collapse
Hi! I have exactly the same problem, how did you fix it? Is there any way to install the original app to connect your phone?