Database Users

Doubts in ROM of Malaysz

Hi,
i install Rom of Malaysz of 11 - 12-2015 and i have some stupid doubts ....sorry i am newer on this.
1 - When i remove ACC signal the bluetooth pairing goes down and when i turn it on again the bluetooth pairing still down. Need go to bluetooth application and do the pairing manually......not good idea....I have a Samsung S4 and my equipment is a Car DVD to Ford Focus with rk3188 and android 4.4.4.
2 - Can anybody explain me how to works the installed application head Unit.. That just have two line and says it was ON but i dont know how it works .....sounds like it was good but i dont see nothing yet
3 - In my connections i dont have output to subwoofer. Anybody knows how to fix this?
4 - In my canbus cnnected to Ford Focus when i turn the car off all goes off except the engine. Any guy knows how to fix this?
5 - Anybody knows a good application to read with bluetooth SMS and Music from mobile phone.
Sorry to bother you. I dont want send the car dvd to the waste
Thanks in advance
Francisco

kiko4949 said:
Hi,
i install Rom of Malaysz of 11 - 12-2015 and i have some stupid doubts ....sorry i am newer on this.
1 - When i remove ACC signal the bluetooth pairing goes down and when i turn it on again the bluetooth pairing still down. Need go to bluetooth application and do the pairing manually......not good idea....I have a Samsung S4 and my equipment is a Car DVD to Ford Focus with rk3188 and android 4.4.4.
Click to expand...
Click to collapse
Do you just need to "reconnect" the device or do you need to "pair" it again?
No idea about your other questions, some of them I don't understand (sorry).
You can also try the rom by booroondook which is the one I am using. Working very well for me.
http://forum.xda-developers.com/android-auto/mtcb-software-development/rom-fuse-support-t3274272

carbonad said:
Do you just need to "reconnect" the device or do you need to "pair" it again?
No idea about your other questions, some of them I don't understand (sorry).
You can also try the rom by booroondook which is the one I am using. Working very well for me.
http://forum.xda-developers.com/android-auto/mtcb-software-development/rom-fuse-support-t3274272
Click to expand...
Click to collapse
Hi,
thanks by your reply.
I need reconnect it again.
I try that image also but happens the same.

Android 9 Screen : Bluetooth and Android system locked !

Hello,
I need some help for my android screen I bought about one month ago, I'm fighting with it to make Bluetooth and sound working...
Can somebody tell me how to activate Bluetooth as it shows not activated even after many factory reset...
And if possible how to change the firmware because not only Bluetooth but all android system seems to be locked...
Below some photos..
By the way, I have also an issue with USB AUX sound : there is 2 seconds of lag and I don't know how to make it works normally.
Thanks for the help

LauriersRoses said:
Hello,
I need some help for my android screen I bought about one month ago, I'm fighting with it to make Bluetooth and sound working...
Can somebody tell me how to activate Bluetooth as it shows not activated even after many factory reset...
And if possible how to change the firmware because not only Bluetooth but all android system seems to be locked...
Below some photos..
By the way, I have also an issue with USB AUX sound : there is 2 seconds of lag and I don't know how to make it works normally.
Thanks for the help
Click to expand...
Click to collapse
If you bought this new I think the best thing you can do is contact the seller and ask them to replace or refund your money.
I don't think your problem will go away if you have reset it many times already.
If you flash it with a different rom it will invalidate your warranty.
Sent from my VOG-L29 using Tapatalk

Thanks for your answer but it's from AliExpress, in China so impossible to deal with the seller. I don't think he will refund me or send me new one but I'm trying to open a dispute and I'll see.
But I think I will keep the screen and I really need to change the firmware. If someone just can tell me if it's possible...

As expected, AliExpress asked me to return the screen to the seller with my money...
But I won't lose more money again...so can somebody tell me if it's possible to change the firmware or unlock Android system please ?
Thanks

The "not activated" message does appear when no phone is connected, its just wrong translated, it should say "not connected".
Bluetooth can not be enabled for all devices on this units, it`s only programmed for the default KswBT App.
You have a BMW Snapdragon 625 Headunit with rather old 2.4.5 Software version, i recommend you to check out the F30 Forums, where you will find the latest 3.8.0 Version which has also global Idrive support
Kri

Android Headunit 4gb/64gb octacore USB port no data

Hi this is my first post here after it being recommended from another forum
I’ve recently purchased a android unit for a 2012 Range Rover evoque and the USB port is not working. It’s the only one and there is power, it’s able to charge devices but I cannot use a memory stick or my CarPlay adapter
I’ve attached some photos of the system information from factory settings and a photo of usb device test
If anybody has any ideas on how I can fix this is would be hugely appreciated!
If you need anymore information about the unit just ask

Anybody have any ideas at all?

wizzi08 said:
Anybody have any ideas at all?
Click to expand...
Click to collapse
Seems to be a hardware issue. You should get in contact with the seller to get this fixed.

I’ve tried contacting the seller and unfortunately they are not interested/don’t want to help

Then open a dispute and send the unit back.

rigattoni said:
Then open a dispute and send the unit back.
Click to expand...
Click to collapse
The last option is to connect a small USB hub but I would be sending it back because who knows down the track what other issues may arise.
I put a small hub in the middle of my center console so that all the USB's can be inserted at anytime.

Sending it back/disputes/refunds etc are not a option. I’m stuck with the unit and I’d really like to find a way to fix it

wizzi08 said:
Sending it back/disputes/refunds etc are not a option. I’m stuck with the unit and I’d really like to find a way to fix it
Click to expand...
Click to collapse
So how to find a way to fix it if the data connection is broken in a forum?
This is no software issue. It´s a real hardware issue.
Sending this crap back is the only option, if you don´t want pay for a repair at a local specialist.
@sandpita
Sorry, but a USB hub does not make any sense if the USB does not work at all, just spending 5V, but no data. Didn´t you read his posting good enough?

I know from past experience with Linux/android boxes/libreelec/coreelec that 9 times out of ten a USB port that has 5v but no data is normally a software, firmware or kernel issue. I was told this and another forum would be the best place to get advice for these types of devices. Of course if sending it back was a option I wouldn’t even be here

rigattoni said:
So how to find a way to fix it if the data connection is broken in a forum?
This is no software issue. It´s a real hardware issue.
Sending this crap back is the only option, if you don´t want pay for a repair at a local specialist.
@sandpita
Sorry, but a USB hub does not make any sense if the USB does not work at all, just spending 5V, but no data. Didn´t you read his posting good enough?
Click to expand...
Click to collapse
My apologies, I didn't read it correctly and relax it was a simple error on my side.

Hey , i think i have a very similar version of this unit .
Mine is a new version for a 2012 RRS
I also had this issue ! , i resolved it by looking at the cable that goes into rear of the unit and one of the pins came unclipped. it happened after removing it so many times. Pushing it in fixed the issue.
Also, If this dont fix it. Enable developer mode . Looks for USB settings in there, theres an option in there that can change it from USB charging mode to data
Issues so far with mine
OEM interface didnt work - Update from seller
Overheating - Update from seller
Mic not working - Added a USB microphone
GPS signal weak - New GPS antenna
I am onto the last problem which is stopping me putting it in the car.
When ever i use Bluetooth Phone, I get a relay clicking sound from inside the unit . I then cant hear anything from the person on the other side. When i end the call it then clicks again and the stereo starts playing.
I also get the same clicking sound from Google Voice
Could you show me a pic of your phone app on your unit ? also.. Do you get what i mentioned above ?

Hi thanks for the reply ! I have very similar issues to yours!
- original car menus show a black screen with the digital version of the physical buttons it replaced Down the sides
-Reverse camera is also a black screen
-Usb not working as mentioned- I’ll try your cable fix though I’ve already enabled developer settings
-I haven’t had any overheating issues but I haven’t been on any journeys longer than a hour or so yet
Microphone is working ok and the Bluetooth audio and phone all work ok
I will add some photos tomorrow when I’m back with the car
My seller is useless and won’t help at all they simply ignore me, what update did they send you? My vehicle is a 2012 evoque dynamic lux

New TS10 UIS7862 6gb ram 128gb head unit q&a's

So I bit the bullet and bought myself this head unit:
https://a.aliexpress.com/_9JZiHu
Ad stated that unit is 4gb ts8, but unit shipped and arrived is 6gb TS10.
Plugged everything up unit works nice and smooth as expected, but one seriously annoying bug.
Phone connected to HU and when I try to make a phone call I can hear receiver speaking, but they can't hear me.
Head unit does have internal mic. And Mike does work with other apps
I've checked permissions and Bluetooth app does not even request mic permission.
Any ideas? Suggestions? Anyone else got similar issues?
Maybe custom ROMs available etc?
I've managed to enable USB debugging, got passwords for engineering mode, extra settings etc...
Pics of my headunit attached

sciux said:
So I bit the bullet and bought myself this head unit:
https://a.aliexpress.com/_9JZiHu
Ad stated that unit is 4gb ts8, but unit shipped and arrived is 6gb TS10.
Plugged everything up unit works nice and smooth as expected, but one seriously annoying bug.
Phone connected to HU and when I try to make a phone call I can hear receiver speaking, but they can't hear me.
Head unit does have internal mic. And Mike does work with other apps
I've checked permissions and Bluetooth app does not even request mic permission.
Any ideas? Suggestions? Anyone else got similar issues?
Maybe custom ROMs available etc?
I've managed to enable USB debugging, got passwords for engineering mode, extra settings etc...
Pics of my headunit attached
Click to expand...
Click to collapse
Hi there, did you have any luck with this? I've just received the same head unit and found the same problem. I've had a quick troubleshoot but haven't had any success so far. Thanks

coombsee said:
Hi there, did you have any luck with this? I've just received the same head unit and found the same problem. I've had a quick troubleshoot but haven't had any success so far. Thanks
Click to expand...
Click to collapse
I did actually managed to sort it out. Store suggested connecting external mic to 3.5mm plug on the harness that came with head unit. Did that, but nothing changed.
Can't remember exactly what I did, but it's something down the lines of Google Voice setting that it's setup to constantly listen for "hey Google" you have to disable that and than "hey Google" function will only work when you in the maps etc not constantly whilst head unit is on.
If you can't find that setting let me know I'll find it and explain in detail how to do that.
If you have the same issue as me I'm positive that this might be the cause

sciux said:
I did actually managed to sort it out. Store suggested connecting external mic to 3.5mm plug on the harness that came with head unit. Did that, but nothing changed.
Can't remember exactly what I did, but it's something down the lines of Google Voice setting that it's setup to constantly listen for "hey Google" you have to disable that and than "hey Google" function will only work when you in the maps etc not constantly whilst head unit is on.
If you can't find that setting let me know I'll find it and explain in detail how to do that.
If you have the same issue as me I'm positive that this might be the cause
Click to expand...
Click to collapse
That was 100% it. Turned the 'Hey Google' activation off and problem solved. Thanks!

Glad I could help. I remember being frustrated fumming looking for answers for almost a week... With seller being let's say close to useless they did try...
I came across answer online somewhere where same issue was happening with a phone not headunit so thought worth a try and it worked
Anyway, good luck

Could you please give a screenshot of the setting you changed or at least where in the settings the function is.

Go to applications/car settings/ click on the left button ---more/ Google services and preferences/ click on account services/ search, assistant & voice/ voice/ voice match.
First line should say hey Google access your assistant any time you say "hey Google" when your screen is on. Turn this off.
This worked for me. I'll make a short video just in case

ludditefornow said:
Could you please give a screenshot of the setting you changed or at least where in the settings the function is.
Click to expand...
Click to collapse
As promised, sorry video seems a bit blurry phone failing to focus

You have gone over and above. Thank you. Found never have thought to delve that deep into settings for the solution.

I did try to be helpful, because I know how frustrated I was being unable to make a phone call or rather switch to hands free mode on the phone every time there was a call. And it really bugged me. It was obvious that it was software not hardware issue since mic worked everywhere else.
Seller couldn't explain anything either and I ended up ripping my brand new cars dashboard 4 times trying to work it out... So I kind of understand and if it helps somebody else I'm more than pleased with taking 10minutes of my time to do so .
Good day sir

sciux said:
I've managed to enable USB debugging, got passwords for engineering mode, extra settings etc...
Click to expand...
Click to collapse
Would you mind sharing all the codes that you have for the unit please.

ludditefornow said:
Would you mind sharing all the codes that you have for the unit please.
Click to expand...
Click to collapse
extra settings- 123456
developer mode- 7890(**). (**) is your current time. example ..if u try it at 3.00 o'clock just key in 789003. did u get it?

A generic firmware update for TS10 deviced. (link expires in a week - probably worth somebody reuploading)
TS10.1.2_20210106.173438_THEME1.zip
1 file sent via WeTransfer, the simplest way to send your files around the world
wetransfer.com
Place the file in the root of a USB and hit the system upgrade button in the settings.
After the update, go to settings - car settings - extra setting - 123456 - config info - choose the options that were ticked prior to the update (BC6 for me)
The update file is titled: TS10.1.2_20210106.173438_THEME1.zip
Presumably from 6th Jan 2021

Headunit reloaded works very well (for seamless android auto support) on these TS10 units for those who have not tried!

rnakpatel said:
Place the file in the root of a USB and hit the system upgrade button in the settings.
After the update, go to settings - car settings - extra setting - 123456 - config info - choose the options that were ticked prior to the update (BC6 for me)
Click to expand...
Click to collapse
Do you have any screen shots of the UI and the specs with this ROM?
Is it only suitablefor 6gb / 128 gb models or will the 4gb/64gb models also accept this?

rnakpatel said:
A generic firmware update for TS10 deviced. (link expires in a week - probably worth somebody reuploading)
TS10.1.2_20210106.173438_THEME1.zip
1 file sent via WeTransfer, the simplest way to send your files around the world
wetransfer.com
Place the file in the root of a USB and hit the system upgrade button in the settings.
After the update, go to settings - car settings - extra setting - 123456 - config info - choose the options that were ticked prior to the update (BC6 for me)
The update file is titled: TS10.1.2_20210106.173438_THEME1.zip
Presumably from 6th Jan 2021
Click to expand...
Click to collapse
hi rnakpatel , that is my HU detail. can i use firmware that u post for update?

ludditefornow said:
Do you have any screen shots of the UI and the specs with this ROM?
Is it only suitablefor 6gb / 128 gb models or will the 4gb/64gb models also accept this?
Click to expand...
Click to collapse
I can't tell you with confidence what units are compatible. I do note it has settings for screen resolution - this is on my 720p device. I also note I needed to adjust the config info setting to match what my stereo comes with after flashing. The canbus receivers are set up using a database queried online and car specific apps and logos are automatically added.
The update is excellent - everything works very well. Head unit reloaded works with wireless android auto and wired (though a little buggy wirrless)
This

Thanks for this. It is useful.
A couple of questions.
1. Can you run that config again if something is incorrect? If so what is the name of the APK? Or do you need to load the whole ROM again to get to that stage?
2. There is BC6,7,and 8. Do you know what specs they refer to?
3. 20210302_221437.jpg shows a mic gain. Could you please advise on the setting path you used to get to that setting page.
Thanks again.

ludditefornow said:
Thanks for this. It is useful.
A couple of questions.
1. Can you run that config again if something is incorrect? If so what is the name of the APK? Or do you need to load the whole ROM again to get to that stage?
2. There is BC6,7,and 8. Do you know what specs they refer to?
3. 20210302_221437.jpg shows a mic gain. Could you please advise on the setting path you used to get to that setting page.
Thanks again.
Click to expand...
Click to collapse
Can you access the extra settings menu on your current firmware (password 123456)
I would copy the settings for BC6/7/8 from there.
You can update the config as often as you like. This sounds like a risky update, probably not worth attempting if you don't currently have similar software with similar settings.

Another password might be useful for somebody:
Enable USB debug: [email protected]

Trying to identify a UIS8581 unit

Is anyone able to help me identify what unit this is? Its meant to be a higher end unit but finding it really sluggish and also looking at some of the reports its using > 6GB of ram OOB out of 8GB (Not sure how the 2GB unit would have worked) .
Sometimes when turning it back on from standby when playing music etc its really jumpy as its its doing something in the background. Anyone got any recommendations on apps to show what using up all the CPU?
It appears to be a UIS8581 based unit, I have run the HWGetinfo tool on it but its reporting its not a FYT unit.

Post Android system information, including MCU version

The version is retuned as "ZLH_AD_OS_1.24" and the MCU "ZLH_QXLA20830A_Q5H0_8581_13"

Rob_Quads said:
The version is retuned as "ZLH_AD_OS_1.24" and the MCU "ZLH_QXLA20830A_Q5H0_8581_13"
Click to expand...
Click to collapse
This is a completely known unit in here. Try search yourself in this forum for ZLA_ you won´t find anything.

Bit harsh - I have been search but how am I meant to know to search for ZLA not ZLH? Also, searching for "ZLA_" returns a total of 1 hit, a google search for `XDA developers "ZLA_"` also returns just a couple hits not in this forum?

I'm also with the same thing.

Rob_Quads said:
Bit harsh - I have been search but how am I meant to know to search for ZLA not ZLH? Also, searching for "ZLA_" returns a total of 1 hit, a google search for `XDA developers "ZLA_"` also returns just a couple hits not in this forum?
Click to expand...
Click to collapse
ZLA was a typo... sorry.
My posting was not meant to be harsh, but this unit is really completely unknown on XDA.

Yeah that looks like the BMW equivalent to mine with a slightly different CPU
Bhold89 said:
I'm also with the same thing.
Click to expand...
Click to collapse

Talking with the seller, mine was sold by COIKA.
It seems that it follows some patterns that are very similar to other HU's, you just need to make the following to update for example, the boot logo:
Folder structure:
- HUTUpdate
- OS
- bootanimation.zip
- logo.png
- upgrade.en (empty file)
- upgrade.system (empty file)
So, if you find other examples of HU types that are Android-based, this may work.
To upgrade the MCU is
- HUTUpdate
- mcu
- upgrade.mcu
- BMW_8581.bin
I was trying to make backups with other tools, but no success yet.

BMW_OS_8581_1920_720_1.86.zip
drive.google.com
This worked for me as an update, but I have a BMW. Hope this helps!
Just unzip the HUTUpdate to a blank USB

simonb123 said:
BMW_OS_8581_1920_720_1.86.zip
drive.google.com
This worked for me as an update, but I have a BMW. Hope this helps!
Just unzip the HUTUpdate to a blank USB
Click to expand...
Click to collapse
Which HU do you have?

I have also an UIS8581 Unit von Coika. I have software version ZLH_AD_OS_1.86, and MCU LZH_qxha20830A_Q3H0_8581...
I have also some problems... the bluetooth does only work as a headset. you cant switch it on and use it as a normal conection for apps.
Once you switch to original system and then back, all apps are closed( spoitify etc) you need to restart them...
also my sim does not work at all, cause there is no APN setting in the system. once i try to enter it it says user is not able to change settings...
all in all the system is nor really well programmed and has lot of bugs.
If there is anyone who can help with get all the normal functions back pls contact me?
Best regards
Thomas

Bhold89 said:
Which HU do you have?
Click to expand...
Click to collapse
MTK8581a 8/128 for BMW

Tom1386 said:
I have also an UIS8581 Unit von Coika. I have software version ZLH_AD_OS_1.86, and MCU LZH_qxha20830A_Q3H0_8581...
I have also some problems... the bluetooth does only work as a headset. you cant switch it on and use it as a normal conection for apps.
Once you switch to original system and then back, all apps are closed( spoitify etc) you need to restart them...
also my sim does not work at all, cause there is no APN setting in the system. once i try to enter it it says user is not able to change settings...
all in all the system is nor really well programmed and has lot of bugs.
If there is anyone who can help with get all the normal functions back pls contact me?
Best regards
Thomas
Click to expand...
Click to collapse
Hi i have the same unit on my audi q3 with the same firmware 1.86, also i have problem with bluetooth but i want aks you if you turn off the original bluetooth of your car ? Do you use zlink for carplay/android auto? Thanks

Mikdiba86 said:
Hi i have the same unit on my audi q3 with the same firmware 1.86, also i have problem with bluetooth but i want aks you if you turn off the original bluetooth of your car ? Do you use zlink for carplay/android auto? Thanks
Click to expand...
Click to collapse
I use my phone via original Bluetooth on the car. I don't use zlink anymore. As I have the headunit online it makes it easier to use gmaps etc directly.
Do you have a SIM card installed? Does it work? My one does not connect as there is no apn and I cannot set new one. Did you bought it from coika?

Tom1386 said:
I use my phone via original Bluetooth on the car. I don't use zlink anymore. As I have the headunit online it makes it easier to use gmaps etc directly.
Do you have a SIM card installed? Does it work? My one does not connect as there is no apn and I cannot set new one. Did you bought it from coika?
Click to expand...
Click to collapse
i use only zlink...because i like the home of carplay..i don't use the sim card ...yes i bought from coika by aliexpress. for me you need disable original bluetooth of car..and use only headunit..one question..but the our unit is mtcd?

I don't know who is the main manufacturer. Coika says they are the own manufacturers. But don't belieb them. Struggling with the service people since days... Apps are closing after you switch to car system... bluetooth is only working with mobile phone...no obd device etc... SIM card is not working...but they keep me waiting

Similar unit here (Mercedes version):
Version: ZLH_BZ_OS_1.80
MCU: ZLH_BZL221030A_8581_13
Android version 12 (fake - it's 10 - see below)
More info in attached photos.
The 8888 code gets you into factory settings, as in this thread: https://forum.xda-developers.com/t/...-not-fyt-based-read-first-post-first.4525675/
I installed the "Fake Device Test" app and it closes after 1 or 2 seconds (possible sabotage by the device?) but I managed to get the OS info by quickly flicking down the screen while videoing it, then playing back in slow motion. This confirmed the Android API level as 29 (ie Android 10). It also seems to confirm the claimed 8GB RAM and 1920x720 screen are correct.
I want to have a poke around with ADB and busybox, but so far haven't been able connect. The unit claims to be rooted.
Wireless Android Auto works, but one minor annoyance is that my phone seems to give up on Android Auto before the unit is ready to connect. A quick toggle of bluetooth and reconnect to the unit once it's ready is necessary. Also, you need to use a cable for AA when the ZLink app on the device is set to HD - wireless AA on HD delivers a pillarboxed display.
And despite all the images on AliExpress showing 5 icons per page in the launcher, I've only got 3 per page. Is this launcher configurable?
I don't know why exactly, but I have a nagging suspicion that the screen might be a lower resolution than reported, I need to see what the kernel/sysfs says. Do these units have a dmesg somewhere? Or could there be a problem caused by the screen being reported as only 7 inches, as I saw in the output of one of the System Info apps I tried? (Screen is actually 10.25 inches.
One thing I really want to do is get a full backup in case of future problems. Is using TWRP possible on these devices? There is a 1.5 GB "update.zip" on the internal storage, I need get a copy and examine it.
Investigations continue, I'll report back. In the meantime, does anyone have any thoughts on the above?

Tom1386 said:
I have also an UIS8581 Unit von Coika. I have software version ZLH_AD_OS_1.86, and MCU LZH_qxha20830A_Q3H0_8581...
I have also some problems... the bluetooth does only work as a headset. you cant switch it on and use it as a normal conection for apps.
Once you switch to original system and then back, all apps are closed( spoitify etc) you need to restart them...
also my sim does not work at all, cause there is no APN setting in the system. once i try to enter it it says user is not able to change settings...
all in all the system is nor really well programmed and has lot of bugs.
If there is anyone who can help with get all the normal functions back pls contact me?
Best regards
Thomas
Click to expand...
Click to collapse
I have gooting a new 9" android unit for AUDI. With same seller and issue.
Thinking of making a thread

simonb123 said:
BMW_OS_8581_1920_720_1.86.zip
drive.google.com
This worked for me as an update, but I have a BMW. Hope this helps!
Just unzip the HUTUpdate to a blank USB
Click to expand...
Click to collapse
I have AUDI ill compare because folder structurer is similar