Boot Loop after Trying to Install SuperSU with TWRP - Galaxy S6 Edge+ Q&A, Help & Troubleshooting

So I have TMobile Edge+ with TWRP and I was trying to Root with installing SuperSU. The bad news it is goes into reboot loop. The good news is I still
can access TWRP. I have tried wiping cache and do factory reset but nothing works. Any ideas of how I can get my phone back working?
Thanks
Mike

Flash stock rom

restore your phone by flashing the latest stock rom firmware using Odin. if you want to re root, flash twrp using odin after seting up your phone, then flash MAGISK using twrp recovery. dont use SuperSu

Related

TWRP and Philz Recovery don't work

I tried TWRP and it's fine other than it doesn't flash any ROMs that I've tried.
Decided that I should try Philz Recovery ery and that booted fine the first time, tried to do a backup but gave me an error and told me to reboot. It wouldn't boot back into the recovery.
Should I flash stock firmware and try again? Or is there a problem with the phone?
Thanks
undeniableturnip said:
I tried TWRP and it's fine other than it doesn't flash any ROMs that I've tried.
Decided that I should try Philz Recovery ery and that booted fine the first time, tried to do a backup but gave me an error and told me to reboot. It wouldn't boot back into the recovery.
Should I flash stock firmware and try again? Or is there a problem with the phone?
Thanks
Click to expand...
Click to collapse
Just check the root status if that's ok Or re root
Else flash stock rom reset the device root using Cf root and flash philz recovery all should be ok
.

[Q] Can't get twrp to work :(

I flashed twrp form the goo manager app and tried to reboot into recovery but i got a boot loop and the only way i have fixed it is flashing cwm through odin but i dont like cwm as much as i do twrp and yes i have tried to install twrp via odin and still nothing whats going on and how can i fix this??
EDIT: I managed to use recovery tools and install it that way and everything works now!

[Q] Custom Recovery Doesn't Work Anymore

Hello,
I've rooted my own note 3 and flashed Temaseks unofficial cm 12 rom. Everything works perfect so I decided to do the same thing for my father. It all went well, first I rooted his phone, then I flashed CWM and flashed cm 12 by temasek. The rom works fine but I forget to install the Gapps. So I tried to install Gapps but I got an error "Failure Status 6". I googled on that error and someone told it has to do something with CWM. I tried to flash a different version of CWM but now I can't reboot into recovery mode anymore. So I can't flash anything.
I flashed another version of CWM but this one also doesn't work. Whenever I try to boot the phone into recovery mode, the blue line shows up. Rebooting into recovery mode, but after a few secs, the phone just boots the normal way. Is there anyone that can help me to get CWM back to work? In the mean time I'll try to flash TWRP by Odin.
Thanks in advance!
So I flashed latest version of CWM: Buildversion; 6.13.0, CWM Base Version V6.0.4.7. I can reboot into recovery now but still can't install Google Apps due to failure status 6. On my own Phone I run a different version of CWM, but when I try to flash it, the phone won't boot into recovery mode anymore. It only boots into recovery when I flash this V6.0.4.7 . How can I get rid of this version and flash an older version of CWM?
You'll probably have to Odin back to stock and start over...
Morningstar said:
You'll probably have to Odin back to stock and start over...
Click to expand...
Click to collapse
You mean If there is no other way to get the Google Apps on the phone, I have to go back to stock. I did make a backup with CWM on the while it was running custom firmware. Now I have 4 files on my comuter, 3.tar and 1.md5 . If I recover them, I will still have this not working CWM version on my phone right? Isn't there a easier way to delete CWM, can I flash TWRP over CWM and see if it will install these Gapps?
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Morningstar said:
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Click to expand...
Click to collapse
I appreciate your effort, thank you. The recovery issue is solved. I flashed Chainfires Root script and that installed the stock recovery. However, when I tried to install and older CWM version I got back in the recovery reboot cycle. But once I installed the latest CWM it booted in recovery. So I flashed Chainfires Root once again and had the stock recovery back. From there on I tried to install TWRP but got the recovery boot cycle again. My phone is now running android 5.0.2 and I think that's the problem.... :S I'll try again to flash Chainfires Root script to get the stock recovery back. From there on I will try to flash the link you gave to me with Odin and hope that will fix it. Do you have any ideas on what I'm doing wrong?
Your version of TWRP works so far. It reboots into RecoveryMode. Now I'll wipe and try to install Temaseks Cm 12 followed by Gapps! Thanks so far!
Okay, it's solved. Can't thank you enough for you help. Bless you!!
No problem. Glad you got it figured out!
[emoji106]

[TWRP] [G900H] Recovery Flash Successful, But Still At Stock Android Recovery

Hi all,
My Samsung Galaxy S5 G900H, I updated it to stock Samsung Android 6.0.1. Now I want to root it. AS I've read in some of the other threads that flashing TWRPand then the latest SuperSU works. I went ahead and flashed TWRP using ODIN. Odin was successful and my phone rebooted and phone is working fine. But when I try to go into recovery, stock Android recovery pops up. I wonder why?? Can anyone point me out?
try this recovery you will be solved...
juz flash it with Odin 3.09
https://www.androidfilehost.com/?fid=24459283995296044
As rewards hit Thanks
Use twrp 3.0 by fevax i was had same problen but when u flash it reboot to recovery then to systen
I flashed this same recovery earlier. It is not working for me.
It's the same one I flashed earlier. Not working for me. Should I try to reflash the stock firmware and try again??
"flash it reboot to recovery then to system" Important point. This worked. Instead of rebooting directly after flashing. I flashed recovery, then removed battery to turn device off. Then rebooted into recovery. It WORKED.
I think rebooting into system first rewrites TWRP with stock recovery.
guru_iyer's Avatar
Edit
"flash it reboot to recovery then to system" Important point. This worked. Instead of rebooting directly after flashing. I flashed recovery, then removed battery to turn device off. Then rebooted into recovery. It WORKED.
I think rebooting into system first rewrites TWRP with stock recovery.

Bootloop after uninstalling magisk

i wanted to remove root so i flashed stock recovery and removed twrp ,then went to magisk app and press complete uninstall and reboot.
the result is bootloop and cannot flash twrp or stock rom via odin. what can i do even with data loss??
minagx said:
i wanted to remove root so i flashed stock recovery and removed twrp ,then went to magisk app and press complete uninstall and reboot.
the result is bootloop and cannot flash twrp or stock rom via odin. what can i do even with data loss??
Click to expand...
Click to collapse
problem is solved by wiping data then flashing rom via odin.

Resources