Hello there dear XDA users. I have this problem.. 2 weeks ago I connected my phone to the PC to transfer some music. No problem! No HiSuit or any other program needed. Just put the cable on both sides and it works like a charm. So far so good. 2 days ago I wanted to get some more music to my phone. I connected it like I usually do for 100th time and this message popped on my PC screen. "the last device you connected to this computer malfunctioned" I said to myself "ok not big of a deal I will fix it." YES ...but NO. I tried EVERYTHING. Going into Manage:
Uninstalling all USB - Not working
Updating Drivers to all USB - Not working
Disabling all USB - Not working
Uninstalling all hidden USB - Not working.
______
Regedit:
I also tried that ,yes.
Regedit editing - Not working
Power options - Not working
I freaking tried everything but it still not working. Whenever I connect it to PC the message pops.
I downloaded HiSuit... here gets interesting. When I installed HiSuit it connected to the PC !!! BUT. After I disconnected it I wasn't able to connect it again even with HiSuit. I tried to do the steps as I did them when I connected it with HiSuit , not working yet again.
Also tried ALL USB ports on my PC . Tried 3 diffrent cables. Tried phone on different PC , still same error. Tried phones on my PC , no error. They connect like a charm.
Phone Factory Reset - Not working.
The phone is NOT rooted or updated out of stock Huawei 7.0 android.
Also the phone connects to PC and starts charging. I tried debugging and etc. Not working also.
I hate to be this person but.. bump?
Related
Hello good people,
I've got a problem with my Wizard that's been bugging me for a while now and no matter what i try, i can't get it fixed........
Recently i flashed my Wizard to WizFlo2d 6.1.1.2, everything good and all, but the rom is too buggy for me and i want too flash something else.
Only problem is, since flashing that rom, i can't flash anything else, because Active Sync doesn't work at all. It will connect, but when syncing i get lots of errors. The pda also reports errors, but i can't even read those because of it's buggyness. There is a hotfix for this problem but that won't install ¬¬ This all also means i can't flash, not in Vista, not in XP, not in bootloader, nowhere. I keep getting the Phone not ready or Phone not connected error over and over again....
I really hope you can help me with this because my pda is as good as bricked right now, the rom is very buggy and doesn't work and i can't get another rom on it....
USB port trouble
The problem is with the USB port you are connecting to, I had the same problem with WM6.1 ROM's while it was fine in WM5. Make sure your phone is connected to a USB port in the back of the computer not the front. If it still doesn't work, try unplugging any unneeded USB items and see if that frees up enough power for it to work right. You could also try using a different PC. My wife's laptop worked fine even when no port on my desktop would work. My final solution was to get a powered USB hub and plug into that and now I connect and can flash every single time with no problem.
rmcknight said:
The problem is with the USB port you are connecting to, I had the same problem with WM6.1 ROM's while it was fine in WM5. Make sure your phone is connected to a USB port in the back of the computer not the front. If it still doesn't work, try unplugging any unneeded USB items and see if that frees up enough power for it to work right. You could also try using a different PC. My wife's laptop worked fine even when no port on my desktop would work. My final solution was to get a powered USB hub and plug into that and now I connect and can flash every single time with no problem.
Click to expand...
Click to collapse
Hmm, weird thing is, i'v flashed lots of WM6.x rom's before without any trouble, and i already tried the back usb port. Haven't tried freeing up all the usb ports yet. I will try another pc though, see if that works. Thanks, going to try this now
This keeps getting crazier, i can connect my phone, browse files, download and upload files, but still can't flash...Even with powered usb hubs and other pc's :S:S There's still a tooltip about syncing i can't read....Can anyone help?
i have the same problem.. as works fine but i cannot flash due to a 260-error. Have used all usb-ports and rebootet everything including my fridge but im stuck with this manilla-without-wifi rom
Good day,
Here is my problem, My Herm100 does not connect to pc via USB! It used to connect easily but about 4 days ago it stopped i have replaced 4 cables but still unable to connect! The cell charges when i connect to usb but does not connects to activesyn nor shows that anything has been attached to pc! I'm using activesyn 4.5 everything is same i have not changed / installed anything new on PC or mobile! the os i'm using is Win-xp (Service Pack 2). i have changed 4 cables and tested it on 3 PCs and 1 laptop! Please help me i will be very thankful to you...
Just for the sake of a dumb question, have you rebooted the phone?
I have had a couple instances of my device not connecting till I reboot it.
Yes, i have rebooted it a lot of time! even putted it in the boot loader but didnot did anything. after putting it in the boot loader i just restarted it. It charges with usb cable but does not connect.
You could try opening usb to pc and either check or uncheck the checkbox 'Enable advanced network functionality'
If that doesn't work, then I would grab pim backup, to back up all of your contacts and try a hard reset.
If it still doesn't connect, then I would guess something went wrong with the usb port on the device.
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
Guys could anyone help me?
My phone is Samsung A8 variant A800i non-rooted and already 6.0.1.
Eversince I upgraded to MM thru ODIN I am encountering an error in my OTG as in it won't read any disk... the only resort to make the otg work again is to reflash my phone. However during the most recent otg failure, a "USBsettings has stopped" was shown. I factory reset my phone but still this notification appears everytime I start my phone. So when I decided to reflash my phone, I was shocked that my laptop only charges my phone. It can't even detect my files thru mtp connection.
I tried the following and my laptop still can't detect my phone:
1. At the Developers Option I tried to switch the USB Configuration from MTP to Charging to MTP and various other switching, while connected and unconnected to laptop.
2. Dialled *#0808# to reset USBsettings but I am only getting "USBsettings" has stopped.
3. I reinstalled the USBsettings.apk from the system folder (via total commander).
4. I have installed USBsettings.apk taken from another phone.
By the way before I tried the above methods I have already eliminated the cable and pc problems since using the same cable and laptop, I can connect my other samsung phone thru mtp and is detected by odin. I have also tried various other desktop on Windows 7 and 10 but still the same problem: these only charges my phone.
Moreover, there is no abnormality in my charging time eversince this happened.
Hope someone could help me make this work again.
Thank You.
After updating to nougat my PC used to recognize my A7
But after 2 days I received a second 17mb update , After installing this update my PC was unable to recognize the Phone.
I tried reinstalling all drivers , Tried several working USB Cables but no success.
whenever I connect my phone to computer , the phone just charges , my pc doesn't recognize it.
I tried turning on The MTP option in developer options , still no luck.
I checked if the phone is getting reconized in download mode by odin and the phone wasn't recognized.
Please Help
Rajshinde said:
After updating to nougat my PC used to recognize my A7
But after 2 days I received a second 17mb update , After installing this update my PC was unable to recognize the Phone.
I tried reinstalling all drivers , Tried several working USB Cables but no success.
whenever I connect my phone to computer , the phone just charges , my pc doesn't recognize it.
I tried turning on The MTP option in developer options , still no luck.
I checked if the phone is getting reconized in download mode by odin and the phone wasn't recognized.
Please Help
Click to expand...
Click to collapse
I really hope you found a solution. Ive been looking an answer for this annoying problem for 6 months!
Ive read almost 50 threads in differents forums about this problem but no solution at all.
- Tried changing charging port. Cost me a few dollars but no solution.
- Tried USB debugging on and off from developers menu.
- Did MTP+ADB option in *#*#0808#* menu.
- Turned Low Battery Dump "on" in *#*#0808#* menu.
- Tried 10 or more different original Samsung cables.
- Upgraded PC USB drivers.
None of them worked for me.
Hope you have made a progress.