Related
Does Anybody Know of a Palm emulator that supports conduits.
There is a program called pocket George (Window cleaning Software) that is only written for palm.
There are lots of emulators that will run it, however I need conduits working as it needs to sync with Information that is on PC version.
Anybody have any ideas?
Is there such a software that i can control PC's mouse or PC from my WM5 ppc via bluetooth or wireless lan?
http://www.freewareppc.com/docs/vncviewer.shtml on your pocketpc
and
http://www.realvnc.com/products/free/4.1/download.html on your PC
or just use the the Terminal Services software that comes with WM5 after setting up Remote Desktop or Terminal Server on your PC
Thanks for reply. I also found a software called PPC Tablet. So far it works great and just like something I wanted. I recommend to anyone who is in need of such a software.
Interesting, it's an input-only remote control software. Hadn't heard of it, looks useful thanks.
However it's not free...
Wow, that program looks very useful, only $14....has it been useful for you?
Yes. I am happy with it.
Hi! Hope you could help me (again) :?
First I need to tell - I was searching the forum and net, but unfortunately I can't find what I'm exactly looking for.
(I'm asking about Wizard not Universal / Himalaya...)
What is in your opinion the best (easiest, fastest, most readable with 320x240 resolution, working full screen and in landscape mode, cheapest...) way to remotely connect to the desktop workstation?
[1] Connecting to the Linux box
1A. Command line / shell via ssh/ssh2 – there’s no need to use any special server software nor configuration, but there’s a question about the best client software. Right now I'm going to use http://www.pocketputty.net/. Did you try any of these with Wizard?
PocketPuTTY 0.1 for WM2003 (stable)
PocketPuTTY 0.2 for PPC2002 (highly experimental, unstable)
PocketPuTTY 2006-05-04 dev snapshot for WM2003 (latest, highly experimental)
How stable is the “dev snapshot” version and is there any other (free or almost free) ssh/ssh2 client for PocketPC?
I used to use PuTTY for Symbian S60 and it worked like a charm...
1B. Remote Desktop – what is the best client-server software to do it?
I used to use VNC for Linux PC – Linux PC connection, but I’m not sure if it’s good idea to use VNC with (so) small screen. Any tips and tricks or suggestions how to configure both ends?
[2] Connecting to WindowsXP PC
2A. Command line / shell via ssh/ssh2 – is it possible at all?
Will I need software acting as a server on the PC or there is this kind of software already in the system? Tips & Tricks & configuration examples are very welcome
2B. Remote Desktop – the best client & server software to do it?
Should I use VNC (server and client, like under Linux) or Remote Desktop server already incorporated in WinXP (what about the client in this case)?
And finally – where I can find a manual, help files or specification of the TSC pre installed on my device? Is this software useable?
Maybe I’m looking for something I already have…
Sorry for plenty of questions, but longer I'm searching - more questions I have.
I really appreciate yours opinions
All advices, links, PM's are very, very welcome
Thanks in advance
exbros
exbros said:
And finally – where I can find a manual, help files or specification of the TSC pre installed on my device? Is this software useable?
Maybe I’m looking for something I already have…
exbros
Click to expand...
Click to collapse
To use the pre installed terminal server you need to turn on remote desktop (winxp pro) and input your ip address on the wizard in the terminal server application, as long as your firewall is configured to allow the connection you should be able to control your pc using the software you already have, alternatively you can use services like log me in etc.
good luck
post back if you hit trouble
Rob
I use logmein.com's basic, free service. simple, quick, encrypted and you dont have to remember ip's or anything.
try http://gomyplace.com/ if you need something simple just to browse files on the remote and execute commands in the command shell
you will need just a regular internet browser to access the remot host
free, open source (GPL), works in NATed, firewalled environments, dynamic IPs, etc.
runs on Linux/Win32/Mac requires Java on the host machine
client needs only internet browser
Linux
PocketPuTTy is the way to go for connecting to a linux machine remotely, I'm using the latest dev build on my PDA and haven't found any issues yet, although i have only been using it for about 2 days. It works fine on the screensize too as its only command line.
Windows
I wouldn't even bother with command line for windows, as its horribly underpowered and wont provide you with much usability. It is possible to run SSH on windows, but like I said, I would see no reason too.
I used to have a VNC client for my old Axim X50 which ran great, it supported screen scaling, so it would fit my entire 1600x1280 screen onto the PDA no problems, and zoomed in when I required. It was only really usable to perform very simple tasks, but thats all I needed. Unfortunately I don't remember the clients name, however there are a number on the market that provide the same features.. maybe trying the following?
http://www.parystec.demon.co.uk/pt_vnc_WM5.htm
I use realVNC for my server. Oh and any VNC client should work with any VNC server, so if you installed VNC on linux, this should work fine.
Hope that helps
So you have that new Raspberry Pi all set up with Raspbian and you to use it you have to connect a keyboard and mouse. Maybe you share this keyboard and mouse with another computer (like me) or maybe you have the Raspberry Pi hidden in a console (again, like me) and it's difficult to plug in your devices.
OK, here is a solution so simple it is unreal.
Plug in that keyboard and mouse for the last time OR SSH to your Raspberry Pi (you do have SSH set up right?), open the terminal and type:
sudo apt-get install xrdp
If you did not SSH in then you will need to run this command also to get the ip address of the Raspberry Pi:
ifconfig eth0
Note the IP address.
For LInux:
Install the following:
sudo apt-get install rdesktop
then run
rdesktop (IP address of your Raspberry Pi)
then at the Login to xrdp:
User name of your Raspberry Pi
Password of your Raspberry Pi
Profit!
Non-Linux:
windoze-
start remote desktop and enter IP address then follow Login to xrdp steps above.
fruit systems-
try installing this: http://cord.sourceforge.net/ and then connect to the Raspberry Pi as above.
Or, you can install tightvnc.
DragosP2010 said:
Or, you can install tightvnc.
Click to expand...
Click to collapse
I haven't used that one, is it just as easy to set up?
Sent from my Nexus 4 using xda premium
Easy as PI.
I don't like the raspi with desktop environmdent, it's laggy (more with vnc). ssh ftw!
Overclock it!
Sent from my Nexus 4 using xda premium
For X Window apps, the best way to run is ’ssh -X [email protected]_IP’.
Of course we need an X server running, but I’m a linux user.
You just solved a bit problem for me
Actually two.
1. As I do not have a TV or monitor with HDMI input, I had to use this converter for VGA and the display is crappy. The very first thing I do on such RPi is enabling SSH. But from now on, all I have is SSH. I now have much better to work and mnage my RPi's. COOL !!!!!
2. I was also having an issue with my virtual servers, one of which hosts an install of the Android development tools. So far, I was using NX to connect, but since some version of Ubuntu, I could not start an Android VM remotely. Some missing modules, or configuration. I hated this. I was using NX for a long time now. This xrdp seems to work fine. I installed it on a test machine with Android SDK stuff, and voila !! I can start the virtual Android machine no problem.
Great info !!!!!!!
@marty331: Thanks lot
marty331 said:
So you have that new Raspberry Pi all set up with Raspbian and you to use it you have to connect a keyboard and mouse. Maybe you share this keyboard and mouse with another computer (like me) or maybe you have the Raspberry Pi hidden in a console (again, like me) and it's difficult to plug in your devices.
OK, here is a solution so simple it is unreal.
Click to expand...
Click to collapse
I have a similar problem, except that I share my monitor with my son and his Raspberry Pi. Both of us are building and programming different robots using the RPi and arduino controllers. So I get very little time at the actual keyboard. I did something similar except I am using tightvnc on the RPI and then Remote Ripple on my Nexus 10 and Kyocera phone and then tightvnc java viewer on my windows laptop (if I ever use it, mostly just a cloud print server) . The Nexus 10 being the main computer I use along with my RPi. Full GUI of my RPi Xwindow or SSH shell account on the RPI. (if you can do it on the RPi, you can do it on your nexus! (except remote raspicam/raspivideo.. not yet available.. it will be though!)).
Several different ways to do this, to each their own... but I wanted my N10 client to be made by the same developer as the VNC server. Tightvnc has a large following, so that is good. I did have to pay $5 for the Android version Remote Ripple (tightvnc android client). But I don't mind supporting the authors of quality software (not forced too.. hear that MS!)
you do feel a lag from being on a wireless network, but it is nice being able to log it anytime from anywhere (not just home wifi, I can also use my PI over the internet!)
metaled222 said:
I have a similar problem, except that I share my monitor with my son and his Raspberry Pi. Both of us are building and programming different robots using the RPi and arduino controllers. So I get very little time at the actual keyboard. I did something similar except I am using tightvnc on the RPI and then Remote Ripple on my Nexus 10 and Kyocera phone and then tightvnc java viewer on my windows laptop (if I ever use it, mostly just a cloud print server) . The Nexus 10 being the main computer I use along with my RPi. Full GUI of my RPi Xwindow or SSH shell account on the RPI. (if you can do it on the RPi, you can do it on your nexus! (except remote raspicam/raspivideo.. not yet available.. it will be though!)).
Several different ways to do this, to each their own... but I wanted my N10 client to be made by the same developer as the VNC server. Tightvnc has a large following, so that is good. I did have to pay $5 for the Android version Remote Ripple (tightvnc android client). But I don't mind supporting the authors of quality software (not forced too.. hear that MS!)
you do feel a lag from being on a wireless network, but it is nice being able to log it anytime from anywhere (not just home wifi, I can also use my PI over the internet!)
Click to expand...
Click to collapse
metaled222,
Looks like youv'e done your homework! Great job on getting all that together!
hi, having just switched away from using cm rom's the one thing i'm really missing is their inclusion of openssh, so i was wondering if anyone has built cm's openssh as a standalone app? or is that even possible? thing is i've tried all the ssh apps on play but none of them will provide the raw ssh command for use in the terminal emulator so asking here is my last hope of finding a solution lol
tia for any help