my defy Not working.. - Defy Q&A, Help & Troubleshooting

HI a few month ago
I tried to return stock but my defy brick.
after some sbf install(too many.. even tried defy+ sbf..)
now, as you know my defy is not working..
just white LED light turn on..
what should I do? plz.. help
(Green lens defy)
My youtube link don't work;;;
[ https://youtu.be/N_ukxVSMp5s ]
thanks!

Most probably the battery is causing that (it already happened to my own Defy) because it isn't making contact with the battery contacts in the phone. You could try putting a little paper that makes presion between the battery and his place, forcing that to enter successfully.

Related

[Q] HD2 Not booting up Black screen! ;s

So , i had my hd2 and i got magldr on it and clockwork i think how its called , for installing android from sd. Android worked fine but then suddently it just turned off and i can't put it back on , not even in the bootloader ;s its just a black screen , no response or nothin , tried to plug it in , not even showing it is actually recharging , the battery was 60% at that time. Also i tried everything , hard reset , soft reset & taking the battery in and out, also tried to connect to my pc , but it didn't do anything. Any solutions for this? plz im desperate
It seems like your phone is bricked. That's the time when it becomes so unresponsive (like it's dead) to how you described it.
and is it possible to unbrick this?
jory9 said:
and is it possible to unbrick this?
Click to expand...
Click to collapse
Not in your case. Only if you were able to boot into bootloader then you could.
you got any suggestions what i should do?
jory9 said:
you got any suggestions what i should do?
Click to expand...
Click to collapse
A jtag method could fix it... pm send to you.
Bent battery pin.
how can i see this , how should the pins be?
If one is bent it is usually pretty obvious, all three should be sticking straight out, all the same, but they catch easily on the plastic surrounding the terminals on the battery.
The normal cause of your symptoms is a regular radio flashed to a tmous,, or a flat battery. If the option of putting another battery in your phone, or your battery in a different hd2 is possible, you should deff try that, just to rule it out.
the pins are all ok , i can see it on the led of my powerplug. when i put the battery out it is green when i put it back in it is red
Hello there
i have exactly the same problem with my HD2.
Did someone managed to restore his phone ?
Thanks

[Q] Defy will not turn on, no lights etc

Hi, the background is my defy suddenly started shutting down and restarting over and over again. It then turned off never actually starting up. I followed the instructions to hold down vol key and power and i had the little man and ! appear, but then the battery died. It now wont do a thing, no lights,power . I have even tried my wifes defy battery fully charged and i cant power it up. I have plugged into into the pc with no result. Have a got to send this to my insurers or is there something else i can try, i could do without the excess and inconvinience, Thanks Steve
First charge your battery using the Mc gayver methode
Sent from my MB525 using Tapatalk
If he tried another, fully charged accu, then no use to try 'McGyver' - especially can be dangerous if not properly applied.
I had similar problem solved with another battery.
Unfortunately seems bigger hardware problem and I would suggest to send it for repair.
Many thanks, i have definately tried a fully charged battery, so i will take the repair advice, i do have insurance, although its with the awful supercover company, but hopefully the will eventually sort it , cheers
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
I once managed to rescue a Defy that wouldn't power up by flashing a stock ROM with RSDLite.
Because stock ROM SBFs don't touch your data partition you have a pretty good chance of reviving your Defy without losing your data. If you turn it in for repair it's almost certainly going to be wiped, so I'd try to flash it first before handing it over to the repair guys.

[Q] Possible to recover data from a non-booting defy (caused by physical impac)

Recently my Motorola Defy+ received a pretty soft blow from a hammer. It really was just quite small impact. As result the phone is not booting
- It is showing the red Motorola logo (the one when you first turn on the device, no animated "waves" appearing)
- Nothing else happpens
- If I try to start the bootloader (press power and volume +) it starts and says OK, ready to program
So at least something is still working, right?
I know this situation sounds quite similar to bricking your phone after failed rooting or flashing but this problem was caused by a hammer, so I feel it's okay to post this question even though there are similar problems.
- I have not rooted or flashed my phone
Question: Is it possible to recover any data via USB or otherwise, even though the phone is not booting? (My SMS backup was a few days old)
Nope
Sent from my MB526 using xda premium

Defy battery question mark

Hi, guys!
Lately I've been running CM7 on my Defy, but after several days without using it I tried to charge the phone and suprise! screen shows a questionmark that I can't avoid. The phone doesn't initiate without charger plugged. I can access to recovery and flash everything i want to. But the problem is anything that I've flashed can solve my problem, not even battery fixes. Any idea? The best progress I've made is to see CM9 screen (if I install CM9 and its battery fix) loading, but after 5 minutes of waiting shows me the same screen.
Having somewhat same problem
Sent from my ST25i using xda app-developers app
asn39 said:
Having somewhat same problem
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
i have the same problem someone please help
My friend is also facing same problem...
He has Defy green lens and yesterday he buy new battery (1700mhz) and his phone is also showing "?" sign for battery......
I tried many fix but non of them worked
Sent from my GT-N7100 using xda premium
Euro_Rules said:
My friend is also facing same problem...
He has Defy green lens and yesterday he buy new battery (1700mhz) and his phone is also showing "?" sign for battery......
I tried many fix but non of them worked
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Did he flash any new SBF recently? I accidentally flashed a BL7 SBF to my green lens Defy and ever since, no battery gets recognized. Still hoping someone suggests a fix... http://forum.xda-developers.com/showthread.php?t=2202747
Hi guys , I had the same problem ... i just did a
hard reset ,
wipe data/factory settings and
wipe cache
reboot system
and later flashed the new cm7 or new cm10 now my battery shows accurate percentage!!!
sunnysays said:
Hi guys , I had the same problem ... i just did a
hard reset ,
wipe data/factory settings and
wipe cache
reboot system
and later flashed the new cm7 or new cm10 now my battery shows accurate percentage!!!
Click to expand...
Click to collapse
I can't do a hard reset because system doesn't boot at all. Just the logo load screen.
lanluckez said:
I can't do a hard reset because system doesn't boot at all. Just the logo load screen.
Click to expand...
Click to collapse
Switch off your defy ...Before connecting the charger press volume down button and later connect the charger simultaneously holding the volume down button
Sent from my MB526 using xda premium
I tried everything I found in this forum. Flashed stock Froyo, hard reset, wiped cache, wiped dalvik, battery stats, fixed permissions, installed Battery Callibration went back to previous CM that worked, flashed battery fixes and still can't get the "unknown battery" thing fixed. I got a question mark in the status bar and when I go to Settings>Battery it shows 100% Unknown. In the lock screen it shows "100% Discharging" In the bootloader however it shows the real percentage. I don't know what else to do.
Sent from my awesome Motorola Defy MB525 Bayer running Android 4.2 thanks to Quarx
Happened to me that the brand new battery didn't charge, just a question mark on the notification bar(I even charged via mcGyver Style). Check your connection pins on the battery between + and -. It couldn't check the battery load status. Check yours if still have the problem.
krumpl1 said:
Happened to me that the brand new battery didn't charge, just a question mark on the notification bar(I even charged via mcGyver Style). Check your connection pins on the battery between + and -. It couldn't check the battery load status. Check yours if still have the problem.
Click to expand...
Click to collapse
I already did that, I also bought a new battery but the problem is still there
Thanks!
sunnysays said:
Switch off your defy ...Before connecting the charger press volume down button and later connect the charger simultaneously holding the volume down button
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks dude. I did what you said. Then i did a factory reset and rebooted. Then i disconected from the charger, put the battery, and connected again and it worked!!! :laugh:
sunnysays said:
Hi guys , I had the same problem ... i just did a
hard reset ,
wipe data/factory settings and
wipe cache
reboot system
and later flashed the new cm7 or new cm10 now my battery shows accurate percentage!!!
Click to expand...
Click to collapse
:good: :good: :good: !!! :victory:
Motorola Razr
sunnysays said:
Switch off your defy ...Before connecting the charger press volume down button and later connect the charger simultaneously holding the volume down button
Hi Sunnysays,
I have applied your method to Motorola Razr Xt 910 about two months ago. It worked fine. Today, the problem reappeared. The system gives a false reading of the battery status (100%, however different reading is shown at Safestrap). Battery meters report discharging but not charging, and my circular icon is greyed and empty or with a tiny ? mark.
I have tried your method again and the fast boot says the battery is ok but the problem does not go away. I did it a few times - still no improvement. I am depressed
I wonder if you have further suggestions what can be done.
Click to expand...
Click to collapse
GiorgioColassi said:
sunnysays said:
Switch off your defy ...Before connecting the charger press volume down button and later connect the charger simultaneously holding the volume down button
Hi Sunnysays,
I have applied your method to Motorola Razr Xt 910 about two months ago. It worked fine. Today, the problem reappeared. The system gives a false reading of the battery status (100%, however different reading is shown at Safestrap). Battery meters report discharging but not charging, and my circular icon is greyed and empty or with a tiny ? mark.
I have tried your method again and the fast boot says the battery is ok but the problem does not go away. I did it a few times - still no improvement. I am depressed
I wonder if you have further suggestions what can be done.
Click to expand...
Click to collapse
have no idea of razr xt ... but try this method
- Wipe cache
- Wipe dalvik cache
- Reboot
Click to expand...
Click to collapse
Same problem on Moto Razr Xt910
sunnysays said:
Hi guys , I had the same problem ... i just did a
hard reset ,
wipe data/factory settings and
wipe cache
reboot system
and later flashed the new cm7 or new cm10 now my battery shows accurate percentage!!!
Click to expand...
Click to collapse
Hi,
I had the same problem on Moto Razr XT910. Used your approach in a simpler version (basically, I wiped all and rebooted the system - CM Android 4.4.2). It worked. I thought others might want to know. A couple months earlier, it has also appeared but then Sunnysays' other method worked (it did not this time). He (you ) suggested to power down Defy, then hold lower volume key and reconnect the charge cable.
Interesting - the symptoms are the same but the causes must differ slightly as of the two methods of repair, only one worked each time but not the other.
Defy and Razr XT910 share a problem (and solutions)
sunnysays said:
GiorgioColassi said:
have no idea of razr xt ... but try this method
- Wipe cache
- Wipe dalvik cache
- Reboot
Click to expand...
Click to collapse
I did and it worked beautifully. Thanks again for the great ideas!
They seem to have the same subcomponents in both Defy and XT910, at least judging from the nature of the problem and solutions that work.
Click to expand...
Click to collapse
GiorgioColassi said:
sunnysays said:
I did and it worked beautifully. Thanks again for the great ideas!
They seem to have the same subcomponents in both Defy and XT910, at least judging from the nature of the problem and solutions that work.
Click to expand...
Click to collapse
glad that worked for u:good:
Click to expand...
Click to collapse
-
Hey guys, got the infamous question mark here too, the problems seems to be some outdated "battd" file which I can't replace nor change its permissions (no idea why tho). So I tried a hard reset but didn't work at all, and now I can't even transfer the rom to sd card again, since the phone shuts down when not plugged to the charger. Any ideas? Thanks in advance!
Stuff wire into the battery terminals
Chances are that, the defy battery terminals do not touch/contact the phone's terminals properly. In such cases, the battery is not detected and we get the ? .
Try this quick fix: Stuff and tightly pack small copper/metal wire pieces (could be taken from any usb cable, remove the insulation and use the bare metal wire) inside the crevice of all 4 terminal holes of the battery and then fix the battery to the phone.
Improper contact problem will be resolved.

[Q] No bootloader, even with McGiver, no RSD. Lost?

Hi! I'm a defy owner and yesterday a friend gave me his old defy that was stuck at the motorola red logo wondering if I can help him to recover functionality since he lost his main phone.
I tried two or three .sbf's without luck, then I thought his defy might be running bl7 so I tried with the Chinese sbf, it returned a fail in the program and a series of numbers in the screen. I thought 'Ok, no problem, let's try another one', so I didn't write down the code but for my surprise the phone is no longer turning on.
I tried using the McGiver trick, it didn't work. Once with my phone defy I had a similar problem, the screen was black but RSD could recognize it anyway, but I was unsuccessful trying that with this one. I also tried keeping pressed different combinations before connecting the batteries (I have a drained one and a fully charged one). Nothing happened.
I even tried jumping and desoldering the little clock battery from the board without success. Honestly I ran out of ideas. The only sign I have is the white led when I connect the drained battery trying to entering the bootloader without McGiver (but someone told me that was because of the drained battery).
Honestly I think is gone for good, but just in case i'm posting this. I hope this was descriptive enough, any ideas will be received.
Thanks, live long and prosper

Categories

Resources