Related
Hi all,
To cut a long story short, around the time MM was being released I cracked my display and broke the digitiser. Before sending the phone off for repair I got the update notification -.- but sent it away without updating as I couldn't accept it. Phone returned and working but no OTA notification, factory reset a few times, sim out and try again, all the usual tricks. They flashed my phone in the factory (came back wiped) and for some reason this firmware isn't getting the OTA update.
So after persevering with Lollipop (and cracking the display again, and fixing it myself this time) I'm getting Marshmallow one way or another. I just would like to know the best way.
I'd rather keep everything as stock as possible (in terms of bootloaders and rooting) and my current plan was to flash TWRP and try running a MM OTA file. I'm just looking to verify this would work and if so, any pitfalls (future OTAs) or things that could go horribly wrong by doing something idiotic.
I'm on an EU XT1572 so I'm assuming a general EU OTA file will work?
Thanks in advance for any assistance,
Phil
clarkey586 said:
Hi all,
To cut a long story short, around the time MM was being released I cracked my display and broke the digitiser. Before sending the phone off for repair I got the update notification -.- but sent it away without updating as I couldn't accept it. Phone returned and working but no OTA notification, factory reset a few times, sim out and try again, all the usual tricks. They flashed my phone in the factory (came back wiped) and for some reason this firmware isn't getting the OTA update.
So after persevering with Lollipop (and cracking the display again, and fixing it myself this time) I'm getting Marshmallow one way or another. I just would like to know the best way.
I'd rather keep everything as stock as possible (in terms of bootloaders and rooting) and my current plan was to flash TWRP and try running a MM OTA file. I'm just looking to verify this would work and if so, any pitfalls (future OTAs) or things that could go horribly wrong by doing something idiotic.
I'm on an EU XT1572 so I'm assuming a general EU OTA file will work?
Thanks in advance for any assistance,
Phil
Click to expand...
Click to collapse
Easy-peasy.
*NOTE - Using TWRP to flash the OTA.zip IS NOT an option, it WILL fail. You can however use the stock recovery and ADB sideload it.. but the following is how I would probably do it. It's also easier IMO.
I'm assuming your bootloader is unlocked since you were talking about using TWRP so grab the WHOLE 6.0 firmware for your phone (I'm guessing your're RETEU so -> XT1572_CLARK_RETEU_6.0_MPHS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip - It's 1.3GB in size) and then reboot the phone into the bootloader (Fastboot mode) and use the files in it to flash everything (this process will wipe the phone so backup anything important first) with fastboot and you will be on a clean completely stock 6.0 with the february patch.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Standalone Fastboot & adb installer - LINK
WHOLE Firmware - LINK
Good luck! If your bootloader is not already unlocked and you don't want to unlock it there is still hope.. it will just be a bit different process by using the OTA zips and the stock recovery.. let me know if you MUST go down this route.. it's a bit more of a PITA IMO.
EDIT* If terminal commands are not your thing you can also try using RSDLite.(Official Moto tool). but I've not personally tried it with my Moto X Pure... I like the terminal
DaMadOne said:
Easy-peasy.
*NOTE - Using TWRP to flash the OTA.zip IS NOT an option, it WILL fail. You can however use the stock recovery and ADB sideload it.. but the following is how I would probably do it. It's also easier IMO.
I'm assuming your bootloader is unlocked since you were talking about using TWRP so grab the WHOLE 6.0 firmware for your phone (I'm guessing your're RETEU so -> XT1572_CLARK_RETEU_6.0_MPHS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip - It's 1.3GB in size) and then reboot the phone into the bootloader (Fastboot mode) and use the files in it to flash everything (this process will wipe the phone so backup anything important first) with fastboot and you will be on a clean completely stock 6.0 with the february patch.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Standalone Fastboot & adb installer - LINK
WHOLE Firmware - LINK
Good luck! If your bootloader is not already unlocked and you don't want to unlock it there is still hope.. it will just be a bit different process by using the OTA zips and the stock recovery.. let me know if you MUST go down this route.. it's a bit more of a PITA IMO.
EDIT* If terminal commands are not your thing you can also try using RSDLite.(Official Moto tool). but I've not personally tried it with my Moto X Pure... I like the terminal
Click to expand...
Click to collapse
Thanks a million.
I've not unlocked my bootloader, but I don't think it should be a problem there's plenty of tutorials etc for that.
Ideally, I'd not like to wipe my phone but alas it looks like that's going to be the case and I'll trust your advice rather than looking for a lazy way out haha. Is there any way to back up everything (even just apps, etc) without root though?
Cheers :good:
clarkey586 said:
Thanks a million.
I've not unlocked my bootloader, but I don't think it should be a problem there's plenty of tutorials etc for that.
Ideally, I'd not like to wipe my phone but alas it looks like that's going to be the case and I'll trust your advice rather than looking for a lazy way out haha. Is there any way to back up everything (even just apps, etc) without root though?
Cheers :good:
Click to expand...
Click to collapse
Yea, your warranty is void at this point anyways so why not just unlock it! I root and use TiBu.. so I've not tested other backup methods but I'm pretty sure there are backup apps on the playstore that don't require root you could try.
BUT, the step "fastboot erase userdata" is what erases your installed apps/setting and personal files, etc. Really you can just SKIP that step and you SHOULD be ok. Then your apps and settings will be there when you boot 6.0. I was just providing instructions for a fully clean flash. I would say you have a 98% chance it will be just fine though if you don't erase userdata.
EDIT* oh and IIRC you will probably get an error or weird msg with the gpt.bin part of the flash.. ignore it..
EDIT 2* Here is one such app that doesn't look like it requires root. If you go this route make sure you copy everything over to your PC after using the backup app if you are going to run the "fastboot erase userdata" command.
GOOD LUCK!
---------- Post added at 06:38 PM ---------- Previous post was at 06:07 PM ----------
Just out of curiosity.. I've just read some posts on here about people getting their phones back from repair and their bootloader says "Device is ENGINEERING" instead of "Device is LOCKED" or "Device is UNLOCKED".
What does yours say? I'm mainly just wondering if it being in ENGINEERING mode is why you are not getting the OTA...
DaMadOne said:
Yea, your warranty is void at this point anyways so why not just unlock it! I root and use TiBu.. so I've not tested other backup methods but I'm pretty sure there are backup apps on the playstore that don't require root you could try.
BUT, the step "fastboot erase userdata" is what erases your installed apps/setting and personal files, etc. Really you can just SKIP that step and you SHOULD be ok. Then your apps and settings will be there when you boot 6.0. I was just providing instructions for a fully clean flash. I would say you have a 98% chance it will be just fine though if you don't erase userdata.
EDIT* oh and IIRC you will probably get an error or weird msg with the gpt.bin part of the flash.. ignore it..
EDIT 2* .... is one such app that doesn't look like it requires root. If you go this route make sure you copy everything over to your PC after using the backup app if you are going to run the "fastboot erase userdata" command.
GOOD LUCK!
---------- Post added at 06:38 PM ---------- Previous post was at 06:07 PM ----------
Just out of curiosity.. I've just read some posts on here about people getting their phones back from repair and their bootloader says "Device is ENGINEERING" instead of "Device is LOCKED" or "Device is UNLOCKED".
What does yours say? I'm mainly just wondering if it being in ENGINEERING mode is why you are not getting the OTA...
Click to expand...
Click to collapse
Haha suppose you're right! Sure I'll probably just wipe my device in the end, be nice to have a clean go at MM haha.
The bootloader status was indeed locked so I don't know what's causing the issue?
Anyway, thanks a million for the help I'll update if/when all goes well :good:
Despite my best efforts, it seems to have been in vain. I'm getting an error when trying to unlock the bootloader (something along the lines of no backup available, please try again) which is common to people who have sent their phone in for repair.
I'm just wondering if I could flash the firmware regardless of bootloader (Odin maybe?) At this point I'm happy to root suit and boot I'm just a bit sick of moto at this stage so want to be able to control my phone haha.
Any help much appreciated
clarkey586 said:
Despite my best efforts, it seems to have been in vain. I'm getting an error when trying to unlock the bootloader (something along the lines of no backup available, please try again) which is common to people who have sent their phone in for repair.
I'm just wondering if I could flash the firmware regardless of bootloader (Odin maybe?) At this point I'm happy to root suit and boot I'm just a bit sick of moto at this stage so want to be able to control my phone haha.
Any help much appreciated
Click to expand...
Click to collapse
Odin is for Samsung. Moto has RSDLite. But if your bootloader is locked the firmware package must be signed by Moto and I don't thing the ones floating around the web are.
So this is the point where it seems you're stuck with the (possibly) more PITA way. What you need to do is find the OTA zip that goes from 5.1.1 -> 6.0 and use the stock recovery to flash that with ADB. Boot to stock recovery, press button sequence to get the menu (I THINK at the fallen android dude you hold vol up for a few seconds then hit the power button while still holding it.. it's something like that to get the actual useful menu) then towards the bottom is an update via ADB, plug phone into pc via usb and select that and then in terminal do "adb sideload <OTA_file>.zip" and it will flash the OTA, assuming your device passes it's check it will feel like it's taking forever. This method won't wipe your phone either.
EDIT* HERE is a post with a link to the EU OTA and much better instructions than mine You can flash it with adb sideload or like that post says by copying it to your phone before booting the recovery and flashing it.
And then.. assuming you get to 6.0 using that OTA hopefully you can trigger the february OTA to auto download. If not... HERE is a link to a post with the february OTA zip for your phone. Flash it the same as last one.
If flashing the OTA with a locked bootloader and stock recovery doesn't work I'm afraid you're either stuck or your phone is on a return path to Moto again.
DaMadOne said:
Odin is for Samsung. Moto has RSDLite. But if your bootloader is locked the firmware package must be signed by Moto and I don't thing the ones floating around the web are.
So this is the point where it seems you're stuck with the (possibly) more PITA way. What you need to do is find the OTA zip that goes from 5.1.1 -> 6.0 and use the stock recovery to flash that with ADB. Boot to stock recovery, press button sequence to get the menu (I THINK at the fallen android dude you hold vol up for a few seconds then hit the power button while still holding it.. it's something like that to get the actual useful menu) then towards the bottom is an update via ADB, plug phone into pc via usb and select that and then in terminal do "adb sideload <OTA_file>.zip" and it will flash the OTA, assuming your device passes it's check it will feel like it's taking forever. This method won't wipe your phone either.
EDIT* HERE is a post with a link to the EU OTA and much better instructions than mine You can flash it with adb sideload or like that post says by copying it to your phone before booting the recovery and flashing it.
And then.. assuming you get to 6.0 using that OTA hopefully you can trigger the february OTA to auto download. If not... HERE is a link to a post with the february OTA zip for your phone. Flash it the same as last one.
If flashing the OTA with a locked bootloader and stock recovery doesn't work I'm afraid you're either stuck or your phone is on a return path to Moto again.
Click to expand...
Click to collapse
Ah sure I'll give that a go! Just checking if there are any precautions I should be taking for this? Don't want to brick the phone without the ability to flash it back to life again!
clarkey586 said:
Ah sure I'll give that a go! Just checking if there are any precautions I should be taking for this? Don't want to brick the phone without the ability to flash it back to life again!
Click to expand...
Click to collapse
You should be fine. The OTA zip is going to check all of the files it is going to patch first and only upgrade if everything passes. If it finds ANYTHING amiss... it will refuse to flash it. If it refuses to flash it your only hope is to send it to Moto unfortunately.
DaMadOne said:
You should be fine. The OTA zip is going to check all of the files it is going to patch first and only upgrade if everything passes. If it finds ANYTHING amiss... it will refuse to flash it. If it refuses to flash it your only hope is to send it to Moto unfortunately.
Click to expand...
Click to collapse
You, my friend, are a hero.
That seems to have done the trick with no issues (going to see if I can potentially unlock the bootloader now) and I'm finally on MM haha. Seems I have to perform the Feb security update separately too for some reason but I'm not too worried about doing things manually.
Sent you a small token of my appreciation, have a pint on me
Thanks once again
clarkey586 said:
You, my friend, are a hero.
That seems to have done the trick with no issues (going to see if I can potentially unlock the bootloader now) and I'm finally on MM haha. Seems I have to perform the Feb security update separately too for some reason but I'm not too worried about doing things manually.
Sent you a small token of my appreciation, have a pint on me
Thanks once again
Click to expand...
Click to collapse
Sweet! Thanks for the pint! Glad you're updated now. Did it end up giving you the OTA for the February patch or did you have to use the 2nd OTA?
DaMadOne said:
Sweet! Thanks for the pint! Glad you're updated now. Did it end up giving you the OTA for the February patch or did you have to use the 2nd OTA?
Click to expand...
Click to collapse
Had to use the 2nd OTA.zip but I didn't really try any of the remove sim card stuff or waiting long. No unlockable bootloader either but I'm satisfied for the moment haha.
I've flashed a number of ROMs on my XT1575 (thank you devs for much hard work). A week ago I noticed that the second greatest consumer of battery on my phone was Cellular Standby and my "Time Without A Signal" was running 35-65% even though I'm in the middle of Manhattan with strong LTE service. I've flashed three different ROMs, always wiping and doing clean installs, and I have the same problem with all three. Could this be a modem problem? Should I flash a stock modem or a custom modem? I've tried different settings and got the same result. What am I missing?
If you have a TWRP backup of your EFS I'd try restoring that.
Another thing to try might be grabbing the firmware that matches yours from this thread and flashing your modem again.
Code:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
I'm not very familiar with flashing via ADB (I've done it but not often enough to be comfortable with it). I flash via TWRP all the time. Is there a method of reflashing the modem that I can do on the phone via TWRP or must I go the ADB route?
Hi,
I have G4 Plus XT1642 (retapac). It came shipped with 6.0.1 MPJ24.139-48 preinstalled.
Well i flashed, deleted, maybe bricked and then made it work again with the latest version i wanted to have (139-63) and then rooted it. Everything worked/works, but the wifi mac shows as 02 000000 or something (but no problem with that, wifi mac is fixed with some earlier backup i have, it also gets fixed when i flash to original).
But the worst thing is: Both IMEI show as 0. In the setting menu, and also when dialing the command *#06# (Both IMEIs show 0).
It gave some errors at fastboot because of "downgrade" or so, but i think that's not the issue.
I tried everything, also reflashed to my original version (ATHENE_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip). Everything is fine, wifi mac displays as original also, but IMEIs still are 0.
No matter what I do, both IMEI show as 0, and SIM cards don't work ofcourse (they work, show carrier names etc but don't get accepted, ---> "emergency calls only", because IMEI is 0 i think.
Before you ask: No i don't have a very early TWRP backup from before flashing, deleted it because I had later backup I though everything was working, didn't try any SIM at that time.
How can I fix this? Is there any hope?
What gives me the little hope: At "boot thing" when I type fastboot getvar imei, it shows the correct imei! It doesn't list the second sim though.
Thanks in advance!
bauss1 said:
Hi,
I have G4 Plus XT1642 (retapac). It came shipped with 6.0.1 MPJ24.139-48 preinstalled.
Well i flashed, deleted, maybe bricked and then made it work again with the latest version i wanted to have (139-63) and then rooted it. Everything worked/works, but the wifi mac shows as 02 000000 or something (but no problem with that, wifi mac is fixed with some earlier backup i have, it also gets fixed when i flash to original).
But the worst thing is: Both IMEI show as 0. In the setting menu, and also when dialing the command *#06# (Both IMEIs show 0).
It gave some errors at fastboot because of "downgrade" or so, but i think that's not the issue.
I tried everything, also reflashed to my original version (ATHENE_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip). Everything is fine, wifi mac displays as original also, but IMEIs still are 0.
No matter what I do, both IMEI show as 0, and SIM cards don't work ofcourse (they work, show carrier names etc but don't get accepted, ---> "emergency calls only", because IMEI is 0 i think.
Before you ask: No i don't have a very early TWRP backup from before flashing, deleted it because I had later backup I though everything was working, didn't try any SIM at that time.
How can I fix this? Is there any hope?
What gives me the little hope: At "boot thing" when I type fastboot getvar imei, it shows the correct imei! It doesn't list the second sim though.
Thanks in advance!
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto G4 (Plus)/Stock/XT1642/
#for marshmallow
Try to flash modem files for your phone
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
#for nougat
BlackBeats said:
https://firmware.center/firmware/Motorola/Moto G4 (Plus)/Stock/XT1642/
#for marshmallow
Try to flash modem files for your phone
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
#for nougat
Click to expand...
Click to collapse
Yes. Did exactly that. Flashed the files of XT1642_ATHENE_6.0.1_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip ... with the commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Showed some "errors" at fastboot at some, but I think that was normal. And flashing worked.
But in the end, both IMEI are still 0.
Even reflashed the NON-HLOS.bin. IMEI numbers are still 0.
Additional information:
The original version this retapac XT1642 G4 plus came shipped with was MPJ24.139-48.
I then wanted to update to the latest non-nougat version, which is MPJ24.139-63.
I could not update directly to MPJ24.139-63 from MPJ24.139-48. (Because the internal recovery showed error, that flashed version must origin from MPJ24.139-23.4).
So I overflashed (with fastboot) to MPJ24.139-23.4. So the version then was even lower than it came shipped with lol. Then from MPJ24.139-23.4, used the internal recovery (not TWRP), to apply the OTA update file MPJ24.139-63. Since then the Wifi mac was 020000000 or something, sometimes random wifi disconnects, and imei 0. After going back to original again, wifi mac is fixed, but sim imei numbers still are 0.
Edit: not sure if the imei and wifi errors accured since MPJ24.139-23.4, or after the OTA update file, or sometime inbetween because i deleted something in TWRP.
bauss1 said:
Additional information:
The original version this retapac XT1642 G4 plus came shipped with was MPJ24.139-48.
I then wanted to update to the latest non-nougat version, which is MPJ24.139-63.
I could not update directly to MPJ24.139-63 from MPJ24.139-48. (Because the internal recovery showed error, that flashed version must origin from MPJ24.139-23.4).
So I overflashed (with fastboot) to MPJ24.139-23.4. So the version then was even lower than it came shipped with lol. Then from MPJ24.139-23.4, used the internal recovery (not TWRP), to apply the OTA update file MPJ24.139-63. Since then the Wifi mac was 020000000 or something, sometimes random wifi disconnects, and imei 0. After going back to original again, wifi mac is fixed, but sim imei numbers still are 0.
Click to expand...
Click to collapse
Try flashing nougat I guess downgrade created a problem
BlackBeats said:
Try flashing nougat I guess downgrade created a problem
Click to expand...
Click to collapse
I don't want nougat. Can I go back to MPJ24.139-63 from nougat? But maybe worth a try if nobody knows any other possibility
bauss1 said:
I don't want nougat. Can I go back to MPJ24.139-63 from nougat? But maybe worth a try if nobody knows any other possibility
Click to expand...
Click to collapse
Try removing oem fb set command
If it doesn't work then flash nougat then use 6.0.1 custom ROM
Edit fb_mode_set
Flashed everything again, without the fastboot oem fb_mode_set (MPJ24.139-48). Both IMEIs are still 0, everything else is fine though, original wifi mac.
---
Then took original over the air update it offered me (NPJ25.93-14). Installed without problems.
But, guess what.... it made things worse.
Now i am on NPJ25.93-14, the IMEIs still are 0, and the wifi mac address is at 02:00:00:00:00:00 again.
What I noticed is, in settings it shows the IMEI SV (Slot1) and IMEI SV (Slot2). They both changed to 08. I think they were 03 or so before.
Edit: In the boot recovery thing it says the usual stuff:
Battery OK (Charging)
flashing_unlocked
Software status: Official
...
So... updating to Nougat did not help, made things worse (wifi mac weird again, IMEI still 0).
Any other ideas?
Anyone looking for the solution to this problem, it has been fixed here: [Guide] [XT16XX] [Solve] Moto G4/Plus IMEI=0 issue
TLR: Phone boots up and says. Launcher has stopped working, contacts has stopped working and etc.
Ok so i bought Moto G4 XT1625, yesterday. Was very happy with the device. It came with Android 6.0.1, i updated it to nougat 7.0.
But in android 6.0 and 7.0 both i noticed the phone giving random apps freezes and randomly even restarting on 7.0. The problem was minimal so i rebooted the phone 2,3 times and made it working. Then i received another update "NPJS25.93-14-4" on that update the phone got successful but bootlooped when booting for the first time on that update. I thoughts its ok so rebooted to bootloader and booted the phone from bootloader. the phone booted. after that another update came "NPJS25.93-14- (5 or 8) i dont remember properly" in this update the update failed during the installation. Keep in mind that i did not touch anything before this update. The phone was totally stock with stock recovery and everything. On this update the phone failed the update and i got constant bootloop no matter if i factory reset or erase cache it kept bootlooping, now i unlocked the bootloader and installed twrp and flashed a custom stock rom it crash on the boot. Again the random app has stopped working error came continously making the phone unusable. Then i flashed the stock rom correct firmware and everything it bootlooped again, then i rebooted numerous times the phone booted fine. Installed apps. This time did not get any app has stopped working error. Then rebooted the phone to install the sim card phone bootlooped again. Im 99% sure this is a hardware issue. Can somebody enlighten me? Whats going on in here? Thanks. I never faced this kind of problem ever in my life, i have bought more than 100 devices.
@whizinc
The Story is really frustrating especially when you bought it new :laugh:
So let's try to get your device working!
since you unlocked the bootloader you should clean flash the stock rom with fastboot https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 and see what happens. Don't put sim cards in and disable wifi. Just flash, boot and play around to see if it works without reboot.
strongst said:
@whizinc
The Story is really frustrating especially when you bought it new :laugh:
So let's try to get your device working!
since you unlocked the bootloader you should clean flash the stock rom with fastboot https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 and see what happens. Don't put sim cards in and disable wifi. Just flash, boot and play around to see if it works without reboot.
Click to expand...
Click to collapse
I used the OEMLock.bat script. So far the phone booted first time properly without any issue. Sim is working as well. Current its on setup wizard checking network. Lets hope its fixed permanently. I will play with the phone for 5,10 hours constantly and report back. Thanks alot man!
whizinc said:
I used the OEMLock.bat script. So far the phone booted first time properly without any issue. Sim is working as well. Current its on setup wizard checking network. Lets hope its fixed permanently. I will play with the phone for 5,10 hours constantly and report back. Thanks alot man!
Click to expand...
Click to collapse
Good luck:good:
UPDATE
It did not get past the "Checking Network" thing and after pressing the power button screen went black but i could see nav bar and status bar only. The phone has faulty hardware. Im now sure. Going to get it back tomorrow from where i bought it. Lets hope i get a refund or replacement. I bought it from a local mobile mall.
strongst said:
Good luck:good:
Click to expand...
Click to collapse
this phone has faulty hardware. IT failed. Again random apps saying "keeps stop working" such as : snapchat has stopped working
whizinc said:
this phone has faulty hardware. IT failed. Again random apps saying "keeps stop working" such as : snapchat has stopped working
Click to expand...
Click to collapse
Have you installed any third-party apps or restored them?
strongst said:
Have you installed any third-party apps or restored them?
Click to expand...
Click to collapse
nope, not a single app. Everything is clean and properly flashed.
whizinc said:
nope, not a single app. Everything is clean and properly flashed.
Click to expand...
Click to collapse
Snapchat is pre-installed?
strongst said:
Snapchat is pre-installed?
Click to expand...
Click to collapse
You did not get me brother. I was giving an example. Here is a real example:
"Contacts has stopped working"
".com android process keeps stopping"
these are the random errors.
whizinc said:
You did not get me brother. I was giving an example. Here is a real example:
"Contacts has stopped working"
".com android process keeps stopping"
these are the random errors.
Click to expand...
Click to collapse
It's irritating that you described that problem here before https://forum.xda-developers.com/mo...d-stock-jx-s-rom-series-t3658055/post73877878 now posting in a new thread. Does it mean you flashed the modified stock rom first and get the error and after this you flashed fastboot stock rom like described here? I don't get you.
@echo92 did you follow?
strongst said:
It's irritating that you described that problem here before https://forum.xda-developers.com/mo...d-stock-jx-s-rom-series-t3658055/post73877878 now posting in a new thread. Does it mean you flashed the modified stock rom first and get the error and after this you flashed fastboot stock rom like described here? I don't get you.
@echo92 did you follow?
Click to expand...
Click to collapse
posted in a new thread because the problem did not belong to the rom's thread, im sorry did i do something wrong? No. I did not flash the stock custom rom before all of this. I never wanted to flash a custom rom. The thing is the phone failed an OTA update which let me to come to this decision. The phone failed ".5" update and after that it bootlooped. So i thought flashing twrp and flash a custom rom with a clean install would fix it but even the custom rom the " xxx app stopped working error" came continously.
After that i followed echo92's guide and flashed the whole stock rom through fastboot. Still same issue. Random apps crashing.
I think this is hardware issue. Because every idea has been fail till now.
What do u say?
edit: note: when the phone failed ".npj25.93-14-5" update it was completely stock and i did not even touch anything, i dont know why it failed on the first place?
strongst said:
It's irritating that you described that problem here before https://forum.xda-developers.com/mo...d-stock-jx-s-rom-series-t3658055/post73877878 now posting in a new thread. Does it mean you flashed the modified stock rom first and get the error and after this you flashed fastboot stock rom like described here? I don't get you.
@echo92 did you follow?
Click to expand...
Click to collapse
Yep, I've been tracking the topic over both topics, gonna reply here to keep the other ROM thread clean too As I understand it:
Bought the device, had random issues with apps crashing on MM and Nougat.
Flashed TWRP and accidentally took the OTA, soft bricking in the process.
Flashed J-X's NPJS25.93-14-8 modified stock ROM, still app errors.
Reverted back to stock, still app errors, to the point where the device isn't useable and is now bootlooping...
However, @whizinc it's odd that you're experiencing these errors across flashes of the stock ROM and even a modified stock ROM and the data's been wiped each time...
Can you just confirm that with the NPJS25.93-14-4 (March 2017 fastboot ROM) that the stock ROM was flashed with these instructions as well, given that something odd's happening with your device...
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot reboot
The difference is that these include re-flashing your GPT/bootloader (just in case) and also include the equivalent of a factory reset (so effectively a clean install of the stock, unmodified, ROM). I recall you've mentioned doing this, just want to ensure we have a clean slate to work with.
If you can, can you post the output of your flash commands, just want to see if the flash worked, hold fire on updating to NPJ25.93-14.5 for now (or if you want to try your luck, you can get the fastboot file from here - you need to flash it with the above instructions, as it's an upgrade: https://androidfilehost.com/?fid=673368273298984458 )
Else, it may be a hardware failure - when you bought the device, was it new or sold as used? Do you have a warranty with the shop you bought the device from? If you can, can you boot into bootloader, attach your device to your computer, and in the adb terminal, type 'fastboot getvar all' without the quotes, please? This should output a list of the basic details of your device, please post that here - you may wish to edit out your IMEI if you wish.
I have difficulty understanding why someone would void the warranty (by unlocking the bootloader) of a phone that is seemingly defective out if the box. Not a very good idea.
echo92 said:
Yep, I've been tracking the topic over both topics, gonna reply here to keep the other ROM thread clean too As I understand it:
Bought the device, had random issues with apps crashing on MM and Nougat.
Flashed TWRP and accidentally took the OTA, soft bricking in the process.
Flashed J-X's NPJS25.93-14-8 modified stock ROM, still app errors.
Reverted back to stock, still app errors, to the point where the device isn't useable and is now bootlooping...
However, @whizinc it's odd that you're experiencing these errors across flashes of the stock ROM and even a modified stock ROM and the data's been wiped each time...
Can you just confirm that with the NPJS25.93-14-4 (March 2017 fastboot ROM) that the stock ROM was flashed with these instructions as well, given that something odd's happening with your device...
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot reboot
The difference is that these include re-flashing your GPT/bootloader (just in case) and also include the equivalent of a factory reset (so effectively a clean install of the stock, unmodified, ROM). I recall you've mentioned doing this, just want to ensure we have a clean slate to work with.
If you can, can you post the output of your flash commands, just want to see if the flash worked, hold fire on updating to NPJ25.93-14.5 for now (or if you want to try your luck, you can get the fastboot file from here - you need to flash it with the above instructions, as it's an upgrade: https://androidfilehost.com/?fid=673368273298984458 )
Else, it may be a hardware failure - when you bought the device, was it new or sold as used? Do you have a warranty with the shop you bought the device from? If you can, can you boot into bootloader, attach your device to your computer, and in the adb terminal, type 'fastboot getvar all' without the quotes, please? This should output a list of the basic details of your device, please post that here - you may wish to edit out your IMEI if you wish.
Click to expand...
Click to collapse
No no, You got the story wrong. Let me make it correct.
1: Bought the phone from a local mobile mall i have 3 days warranty left. (Phone was on Android 6.0 update)
2: Did not touch the phone. Just installed my daily apps. i.e: whatsapp,facebook and stuff.
3hone started doing odd things like auto touch while charging and apps saying "force stopped" error
4:Then i thought that this is Android 6.0 bug on Moto g4, so i should update it via OTA.
5: Updated to 7.0 same issues.
6:I saw another update did it as well 14-4 update. This update caused bootloop but i managed to make it through by booting from bootloader.
7: Then saw another update 14-5 and that update failed. (WHILE THE WHOLE PHONE WAS ON STOCK STATE) Why did the update fail? I didnt even touch the recovery or anything at that time.
8: Then i flashed the custom rom and the rest of the story goes on as u mentioned in the post.
And yes i cleaned flash the rom with the OEMlock.bat script that the guy above gave to me. It included all things such as boot,modem and all stuff. So it was def a clean install.
"fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot"
This was the script i used to flash the fastboot rom which is 14-4.
Then again got force stop errors and the 14-5 update failed causing bootloop again.
I just have 2 hours to check the devices further or else im gonna return it today. Thanks
MisterSteve said:
I have difficulty understanding why someone would void the warranty (by unlocking the bootloader) of a phone that is seemingly defective out if the box. Not a very good idea.
Click to expand...
Click to collapse
The phone was not in the official warranty from the start lol. I bought it used from a local mobile mall, they give 3 days checking warranty tho. I will try to get another handset. If i cant get it working.
whizinc said:
The phone was not in the official warranty from the start lol. I bought it used from a local mobile mall, they give 3 days checking warranty tho. I will try to get another handset. If i cant get it working.
Click to expand...
Click to collapse
Oh, you didn't mention that you have bought a used device! Bring it back to the shop and buy another/new one. Who knows what's wrong with that device or which history it has...
Apologies for getting the story mixed up, the information you provided in your corrected post and subsequently makes the situation worse though. Sounds like you bought a device exhibiting ghost touching or the beginnings of ghost touch and possibly was hard bricked/had the incorrect firmware flashed previously. As strongst mentioned, return that device. It sounds like it'll be more trouble than it's worth... especially for a used device.
UPDATE
I returned the handset to the shop guy, he was skeptical at first but then he gave it to another guy who said that the phone would go in used market claim and then after that he'll either return me the money or give me a new G4 device. I'll have to wait till monday. It sucks. Anyways Thanks alot guys for the help i appreciate it alot.
Feel free to lock the thread @ moderators.
I am considering switching to Verizon and not sure if anyone’s successfully used Verizon on a Sprint 10, or even tried it.
I’m currently running stock Nougat, haven’t updated since July because HTC’s OTAs don’t play nice with TWRP last time I checked. Already manually unlocked my phone. Have not done SuperCID yet but will definitely do that before flashing anything.
Confused because AT&T and Tmo SIMs work fine and I get LTE instantly when I put them in - but when I put in a Verizon SIM (activated) I get nothing. I did enable Band 13 through cdmatool, and Verizon has Band 4 (which works fine with AT&T/Tmo) in my area, but no signal. This leads me to believe Sprint could have locked it on the stock rom, and enabling Verizon would be as simple as flashing leedroid or viper.
Or if that doesn’t work, I might have to RUU the latest Verizon update and hope for the best. And hopefully not completely brick my phone. Since I’m just testing at the moment, I want to be able to restore back to stock Sprint.
So the possibilities are: (after supercid)
1) flash leedroid or viper
2) select Sprint when installing
3) hope it was a lock on the Sprint rom and Verizon works
Or:
1) flash leedroid or viper
2) select Verizon when installing
Or:
1) erase modemst1 and modemst2
2) flash the Verizon radio over my current rom, no idea where to find a good .img for this
Or:
1) install the entire Verizon RUU
Any thoughts? Which method has the best chance of working? Can either of these brick my phone for good?
EDIT 1/26
Just tried wiping the radio, modemst1 and modemst2, and flashing the Verizon radio. Interestingly, sprint still works with this radio, though it may just be LTE that works. Verizon doesn't work, still thinks it's roaming just like on the sprint radio. So definitely a lock in the ROM.
Anyone wanting to try this - be aware that information such as unlock status are stored in the modemst partitions. So if you erase them, they will restore on the next reboot (anyone know what partition stores backups of these?) but if you manually unlocked your phone or added LTE bands with cdmatool, they will be restored to default.
Backup your radio partitions before doing anything:
Code:
dd if=/dev/block/mmcblk0p30 of=/sdcard/backup-radio.img
dd if=/dev/block/mmcblk0p39 of=/sdcard/backup-modemst1.img
dd if=/dev/block/mmcblk0p40 of=/sdcard/backup-modemst2.img
copy these to your computer.
To restore your sprint radios, boot to bootloader (not download mode) and:
Code:
fastboot flash radio "C:\path\to\files\backup-radio.img"
fastboot flash modemst1 "C:\path\to\files\backup-modemst1.img"
fastboot flash modemst2 "C:\path\to\files\backup-modemst2.img"
It might be possible to restore through dd, but it's extremely risky so use fastboot to do it.