I don't if it was like that before I root. When listening something, say a youtube video, my volume shot down to a low volume for few seconds, nothing gradient, and get back for a minute or two and losse it again. Like if it is loosing the amp and getting back. Software or hardware? Did now saw anything on this problem.
Related
Unlike all the other volume related posts I've found, I seem to have the opposite problem LOL
When working, or late at night when everything else is dead quiet, I've been using my HD to listen to radio / youtube (ok, not strictly working then ), but I'm finding that even on the lowest setting, the volume is actually very loud.
One more down click on the volume buttons turns the volume off, but one click up from silent is too loud for background noise.
I know I could adjust it via the on-screen volume slider app, but that's just a faff!
Is there any way to adjust the volume control buttons so that it takes (say) 10 or 20 clicks to get from off to max, rather than just 3 or 4 as it does now?
Or perhaps I'm just getting old ("turn that racket down son" as my Dad used to tell me...)
Stupid thing is that with the Diamond you could also adjust the volume in the same way (taking steps of 3 bars in the volume overview) but when touching the screen you could increment/decrement with 1 bar accuracy, allowing much better volume control. When I try this on the HD, it skips 3 bars as well...
Argh why remove this feature??
dunno - but it's begining to do my head in...
I've resorted to digging out an old set of headphones which have a volume dial on them
Just tested the mp3 player and found the same problem, very annoying. Be good if someone could make a fix
If you're using Coreplayer, you could assign the volume button to control the volume up and volume down. In addition, in the setting you could choose whether to change the volume in 1% or 10% increments. I always use this option to get the EXACT volume that I want. This is very important when I listen to music before going to bed. With the 10% increment default, it is too loud for me to fall asleep even at 10% loudness, hence I always use this feature in Coreplayer.
Nice on eaglesteve, cheers
I wasn't using it, but at least I know now that I could
TTdegs wanders off to download a bunch of coffee break length tube videos for import...
nin2thevoid said:
Stupid thing is that with the Diamond you could also adjust the volume in the same way (taking steps of 3 bars in the volume overview) but when touching the screen you could increment/decrement with 1 bar accuracy, allowing much better volume control. When I try this on the HD, it skips 3 bars as well...
Argh why remove this feature??
Click to expand...
Click to collapse
That works OK for me, can adjust to the single bar you click on with more resolution than the buttons - I also need to do this to get a low enough headphone level.
the default level of the music player is too high, even though you turn the device volume to the lowest level. any way to modify it?
Hey,
I know it isn't a software solution, but check this out,
http://www.headphoneworld.com/p/Shure_Volume_Control_Attenuator.htm
I'm thinking about getting it as I hate having to take my phone out and don't like the way I can't drop percent at a time on the system volume buttons when listening to music.
With this device you can run the phone volume as normal, and control the signal to the headphones, proportionally without pulling the phone out.
....IB a n e
Actually, as i play more with the HD, i found that when use the setting of TF 3D to adjust the volume, it can reach to the 0% but still outputing a small volume of sound,
that's nice, i can more enjoy the music when my surrounding is quiet.
just share, hope to be useful for you
Love the phone but I think the audio volume output is totally junk.
Has anyone used *#0002*28346# - Audio control utility. or somethign similar to boost audio output on the audio jack?
Which audio output would this apply to? Or there just one? My Focus doesn't act like there's just one control.
Audio output level of the Zune player is definitely very low for me. Audio output level for the phone (ear) is just 'OK', but the speakerphone is very loud. Even if I turn it down to zero I can still hear the conversation. So strange.
... well I just went through that diagnosis screen and couldn't make heads or tails out of it. If anyone happens to figure that out, and determine if we can boost audio output from the headset jack that would be much appreciated!
I am specifically talking about the headset. I think the focus breaks it down like this: headset, speakerphone, earpiece.
Like you said, speakerphone is fine, if not too fine.
Earpiece is barely controllable while the headset (3.5 mm jack) is god awful.
There is currently a WP7 bug that causes game audio to impact audio on the phone. For example, if you are playing a game and you turn audio down to 15 (50%) and then exit the game, the highest volume level you can reach on the phone is 50%. Even if you then turn the volume up to 30 (100%), you are actually getting a level of 50%.
If you are encountering this problem, you'll notice that rebooting your phone will cause earbud/headphone volume to increase dramatically. An easier way to work around it is to go back into your game (any game with audio) and turn the volume back up all the way. If you then exit the game, audio levels should be good.
Microsoft is aware of this.
Jim
Jamesche said:
There is currently a WP7 bug that causes game audio to impact audio on the phone. For example, if you are playing a game and you turn audio down to 15 (50%) and then exit the game, the highest volume level you can reach on the phone is 50%. Even if you then turn the volume up to 30 (100%), you are actually getting a level of 50%.
If you are encountering this problem, you'll notice that rebooting your phone will cause earbud/headphone volume to increase dramatically. An easier way to work around it is to go back into your game (any game with audio) and turn the volume back up all the way. If you then exit the game, audio levels should be good.
Microsoft is aware of this.
Jim
Click to expand...
Click to collapse
Interesting, thanks for the heads up!
I've tried *#0002*28346# but I don't know how to enhance the sound.
The sound is terrible in Focus.
Is there any way to install HTC Sound Enhancer? HTC HD7 it's much better volume in earphones.
I went to *#0002*28346#. Clicked read. Set system, class, and device gain to 10 (was 5 allthough some report it was 7). Volume was much higher via the headphone jack. I then read this thread regarding the game volume problem. I went into a game and put the volume all the way up. Went back to play audio via the zune hub. Volume was back to the low volume that it was originally at. I went back to *#0002*28346# and sure enough, The values reverted back to 5. So it appears the games are setting those values back to default every time you change the volume from within a game. I will have to test again, going into a game and not changing the volume to see if that too will reset it to default.
Do you guys mind complaining in this thread ..http://social.answers.microsoft.com...ad9-5e12-465d-a0fb-b9465179b436?prof=required
MS is still not taking any notice. It is kind of appalling to see such a nice phone as the Focus and Omnia suffer under such a silly bug.
Thanks Denis!!!!
It worked!
1 - PLUG YOUR EARPHONE
2 - ##634# TAPE CALL
3 - in diagnosis mode tape *#0002*28346#
4 - click GET on Device Gain
5 - in 'device gain' leave number 5, set 1500 (max) and -1100 (low)
6 - click set
7 - MAKE SURE AUDIENCE.CFG IS ON
reboot your phone (turn off, turn on)
This one has been bugging me for a while and for the most part I've just worked around it (by manually triggering the bug/fix myself first).
The situation is that X1 starts off at a particular volume level, and I start listening to music via PocketPlayer though from what I can tell it happens regardless. It sounds "ok", but noticeably flat? I dunno like a mono audio file even volume turned up, although I can't confirm that. Just describing.
OK the bug - if some kind of event happens, the volume suddenly jumps up, without actually changing the setting. So I'll be listening to music and if one of the following occurs:
1. receive or send an SMS/MMS
2. I toggle the phone function, i.e. turn off phone radio. when I turn it back on the volume doesn't change
the volume jumps up, and I have to say the music sounds much better. On the flip side, when the phone happens to ring, it's loud as hell, distorts like hell and annoys everyone in the process. The ringtone volume just sounds over-the-top.
Now I'm pretty sure it's not the music player because #2 (toggling the phone) seems to affect the volume already. The message box alert sound on toggling the phone seems louder the second time.
Anyone have or notice this issue?
The only volume threads I find are all about a low constant volume and don't sound like this one. FWIW I did try the reg changes anyway. It still varies.
Hey Guys,
I have a unrooted nexus 7 which has been working fine until a month ago... It started with the power button no longer responding which somehow corrected it self. That sameday I'm watching a you tube video and the speaker buzzed for a second locking up the video, so I had to replay the video and suddenly had no sound... I played around with all the volume controls in the settings and had no success however the volume control for alarm and notification alarm did play a test sound when I moved the bar but did not increase in volume or decrease just remained at the same soft level no matter where I placed my finger on the control bar. But the headphones still work.
So I did a factory reset and it had no effect. I left the device off for a few hours and turned it back on and the audio came back like new, but after 15 to 20 mins it goes right back to the same problem I had since I watched the you tube video... No one else seems to be experiencing this so I think the speaker or something in the hardware has failed... I'll probably RMA but if any one has any suggestions, I'm all ears.
Thanks
I think you are correct about the hardware problem. When it's an hardware issue nothings better than RMA.