Related
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
SobanAmin said:
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
Click to expand...
Click to collapse
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Thanks
sokkoban said:
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Click to expand...
Click to collapse
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Confirmation ?
sobanamin said:
i dont think that you need to go all the way to b052 and then flash the required version
this is what i did:
1) flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( i dont remember exactly :silly: ).
2) i flashed the update.app file that was in the custom folder (that came with b132 rar file) via emui and it restored my build to b132.
3) tried updating to 5.1 via emui but failed.
4) to give it a last try, i downloaded and flashed my phone with cust, recovery, system, boot.img of b136a and then the update worked. My phone is now 5.1.1 b006 :d
thanks for the reply mate :good:
Click to expand...
Click to collapse
i also have p8 lite c185b130 is this confirmly working ?
wahaj0892 said:
i also have p8 lite c185b130 is this confirmly working ?
Click to expand...
Click to collapse
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
SobanAmin said:
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
Click to expand...
Click to collapse
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Hello,
Double tap issue still present in beta
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
I dont use it often so I cant tell for sure
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
mimoriich said:
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
Click to expand...
Click to collapse
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
sokkoban said:
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
Click to expand...
Click to collapse
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
Can I apply this process for my ALE-L21C636B150...?
mimoriich said:
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
Click to expand...
Click to collapse
If you are in stock recovery and have B132 try to put dload folder in internal memory and use software updater
Rifat Nurr said:
Can I apply this process for my ALE-L21C636B150...?
Click to expand...
Click to collapse
No, you can't. This beta is only for B136a(may be work also in B132)
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
what about b170 ??
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
can i flash c136a direcly over c185b130
MAYBE
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
wahaj0892 said:
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Click to expand...
Click to collapse
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
SobanAmin said:
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
Click to expand...
Click to collapse
it is related to typing .. fast typing cause this issue .. i tired many apps nothing fix the issue
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
I tried to install b132 and b136a on my c185b130 but it failed both times.
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
SobanAmin said:
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
Click to expand...
Click to collapse
I have c185b130, there is c185b131 update on consumer.huawei.com for UAE region uploaded on 31-12-2015, will it work on my device? What are the changes in c185b130 and c185b131?
After installing MedroM I got this problem and couldn't connect to google account and every google app would crash if I tried to log in, so I flashed b161 and I still have this problem, even after numerous factory resets, has this ever happened to anyone ?
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
gtdaniel said:
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
Click to expand...
Click to collapse
i'm in the same situation, i tried to do what you've said, but twrp says that the installation failed. how can I have play store working again? please help, this situation is driving me crazy!
i'm on c900 b161.
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
raffabraz said:
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
Click to expand...
Click to collapse
That would be much simpler, I didn't consider that. Would you mind writing up a guide?
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
sirlex said:
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
Click to expand...
Click to collapse
Force closing is caused by the oeminfo in my experience. Can you check in the "About Phone" section which build number your phone currently has? Should be something along the lines of "VNS-L31C432B161" where C432 indicates the region code.
since I am Running MEDROM v2 it shows just that. However , I do know it is based on b161
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
Click to expand...
Click to collapse
Thank you so much , you saved my phone !!
Fllashing stock rom again isnt necessary , just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
simo255 said:
Thank you so much , you saved my phone !!
it doesn't need to reflash stock rom again, just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
Click to expand...
Click to collapse
Interesting, when I tried to do a factory reset after that screen, it always failed.
HeavyHDx said:
Interesting, when I tried to do a factory reset after that screen, it always failed.
Click to expand...
Click to collapse
You have to flash the stock recovery to do a Factory reset
medRom v2 fix
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Could someone provide me the correct oeminfo and custom.bin for a European/German model? C432? The images inlcuded in the toolkit don't work for me, it still crashes or can't communicate with the google server
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installing Android System Web View apk from apkmirror solved the problem for me (arm + x86 package). Thank you
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
Click to expand...
Click to collapse
I got my P9 Lite from Congstar in Germany. I didn't knew, that the device would be branded by Telekom. I flashed the B161 and couldn't connect to any google account. Thankfully updating the webview apk via apk mirror solved this problem. But this leaves me with 2 questions and maybe you could answer these...?
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
I would be really happy if someone of you could help me. :good:
MartinMo said:
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
Click to expand...
Click to collapse
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
HeavyHDx said:
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
Click to expand...
Click to collapse
Isn't Nougat still a beta...? I'm looking for a stable stock version of EMUI...
HeavyHDx said:
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
Click to expand...
Click to collapse
Thank you, tomorrow I'll test if Whatsapp working fine or not, that's important for me. Is Lineage 14.1 the most stable Lineage version?
Nougat is still in beta, yes. The full version is expected to come out within the next few weeks.
14.1 refers to the Android version which is 7.1.1. They adopted CyanogenMod's naming scheme. You'll still need to update LineageOS to get bugfixes and such. The dev releases a new update every 2 or 3 days, just check their website periodically.
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installed Android System Web Viev .apk did the trick for me, too. muchos gracias.
Hi, I have tried all night to install a custom rom and recovery for my huawei p9 lite (VNS-L21).
I've managed to flash Ressurection Remix with Meticulus' TWRP but now my sim card doesn't work.
It's detected but i can't make calls, send messages or use data.
I want to go back to stock EMUI but i don't know how exactly. I've found an update.app for my model but it won't install. I've lost my recovery and i can't flash a new one despite the bootloader being unlocked. Can anyone help me please or guide me how to restore it back to it's original state?
If it helps it was the VIP mobile Serbia model, CM-hi6250.
Thanks in advance, I really want to just have a working phone
ukinuj said:
Hi, I have tried all night to install a custom rom and recovery for my huawei p9 lite (VNS-L21).
I've managed to flash Ressurection Remix with Meticulus' TWRP but now my sim card doesn't work.
It's detected but i can't make calls, send messages or use data.
I want to go back to stock EMUI but i don't know how exactly. I've found an update.app for my model but it won't install. I've lost my recovery and i can't flash a new one despite the bootloader being unlocked. Can anyone help me please or guide me how to restore it back to it's original state?
If it helps it was the VIP mobile Serbia model, CM-hi6250.
Thanks in advance, I really want to just have a working phone
Click to expand...
Click to collapse
If you lost Twrp you must flash it via fastboot command. After that it is neccesary to flash Oem C432 zip. In that step you can chose if you want oem for single or dual sim. I suggest to flash Oem C432 dual sim using TWRP.. On SD card you need to place in dload folder firmware full b160 in format update.app. When the Oem is flashed turn off phone (please dont let to reboot phone after flashing of oem ) , press power+volume up+ volume down, hold them a few seconds after you see logo screen, release buttons and full revovery will start. Oem L21C432 dual sim flashable zip file you can find here or in our local forum on benchmark.
All the best.
ukinuj said:
Hi, I have tried all night to install a custom rom and recovery for my huawei p9 lite (VNS-L21).
I've managed to flash Ressurection Remix with Meticulus' TWRP but now my sim card doesn't work.
It's detected but i can't make calls, send messages or use data.
I want to go back to stock EMUI but i don't know how exactly. I've found an update.app for my model but it won't install. I've lost my recovery and i can't flash a new one despite the bootloader being unlocked. Can anyone help me please or guide me how to restore it back to it's original state?
If it helps it was the VIP mobile Serbia model, CM-hi6250.
Thanks in advance, I really want to just have a working phone
Click to expand...
Click to collapse
i had this problem too cause i was not attentive...
Create a dload folder in your sd card and search for an "update.app" file that is right for your device. Place it in the dload folder then press power button+ volume up+volume down to do a force stock ROM installment after install remove sdcard enter stock recovery make a wipe...restart done
Tell me if it works<3
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
GertFromTheWell said:
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
Click to expand...
Click to collapse
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
1) Download this TWRP backup of MM: https://forum.xda-developers.com/showpost.php?p=73003510&postcount=60.
2) You can put the backup to internal memory or sdcard, After you've chose where you wanna put it, take a backup of boot.img with TWRP to internal/sdcard (where you wanna put the backup), so you'll get a folder with this structure: TWRP > BACKUPS > FPFDU16A20001907 (you'll have different number I guess). Then you'll put the twrp backup folder (which you have downloaded) in that folder with numbers
3) Boot in TWRP, wipe system, data, cache, dalvik cache from twrp > wipe > advanced and then you restore the backup from TWRP > restore (restore only system + data + boot). Then you reboot and you're good to go.
Click to expand...
Click to collapse
Now update to EMUI 5 (N)
After youve downloaded the stock firmware using Firmware Finder, you should have two files:
- update.zip
- update_data_full_CAN-L11_hw_eu.zip (example)
Backup your internal memory as it will be wiped at step 8).
1) Extract update.zip. Then you get UPDATE.APP.
2) Download Huawei Update Extractor.
3) Open Huawei Update Extractor, choose UPDATE.APP from the folder where youve extracted it. Right click RECOVERY.img and extract it.
4) Now boot your phone in fastboot mode by pressing and holding the power and the volume down buttons at the same time.
5) Type in terminal / command prompt on PC to flash the stock recovery which youve extracted at step 3):
Code:
fastboot flash recovery recovery.img
.
6) Reboot.
7) Put update.APP in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.APP from dload folder from your sdcard and extract the other zip (example update_data_full_CAN-L11_hw_eu.zip) and put all the files/folders extracted in dload folder.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
Click to expand...
Click to collapse
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
.
6) Reboot.
7) Put update.zip in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.zip from dload folder from your sdcard and place the other zip there (example update_data_full_CAN-L11_hw_eu.zip.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Love you, i'll try ASAP.
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
wangdaning said:
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
Click to expand...
Click to collapse
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
GertFromTheWell said:
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
Click to expand...
Click to collapse
GertFromTheWell said:
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
Click to expand...
Click to collapse
I'm sorry, it looks like I've wrote update.zip instead update.APP and also at step 9). It was my fault .
I've updated the steps 7 and 9. Thank you!
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
abuapka said:
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
Click to expand...
Click to collapse
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
#Henkate said:
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
Click to expand...
Click to collapse
N partitions? Nougat ?
abuapka said:
N partitions? Nougat ?
Click to expand...
Click to collapse
Yes.
#Henkate said:
Yes.
Click to expand...
Click to collapse
THanks Bro.
Thanku so Much
Got My Phone back to stock 4.1 but its CAN
Before It was MLa-l11 By the way thanku so much
You sure you flashed stock MLA firmware?
no
wangdaning said:
You sure you flashed stock MLA firmware?
Click to expand...
Click to collapse
i didnt flash stock mla firmware i jus5 flashed 4.1 twrp backup
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Echtar said:
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Click to expand...
Click to collapse
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check, if you're on other build number now and you don't know which one was yours.
#Henkate said:
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check if you're on other build number now and you don't know which one was yours.
Click to expand...
Click to collapse
iam on nrd90m test-keys
Echtar said:
iam on nrd90m test-keys
Click to expand...
Click to collapse
Post a screenshot of Settings > About phone as I don't really remember how it looks there.
Hi
I've managed to backup EMUI 4.1, however I'm getting error message "software install failed" trying to update EMUI to 5.0 (pops up, every time when it reach 5% progress).
Any idea how to fix it?
best regards
#Henkate said:
Now update to EMUI 5 (N)
Click to expand...
Click to collapse
Steps #9 and #10 do not work for me ("Software install failed"). But I wonder if they are necessary after all, because Product Id, IMEI, Build-number (and of course EMUI-Version and Android-Version) are stock again.
And isn't "update_full_CAN-L01_hw_eu.zip" supposed to be included in the "update.zip"-file? I thougt "update.zip" allready delivers every part of the ROM.
i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you
kriminel87 said:
i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you
Click to expand...
Click to collapse
please help me anyone !!!
kriminel87 said:
please help me anyone !!!
Click to expand...
Click to collapse
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers
Dadditz said:
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers
Click to expand...
Click to collapse
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??
kriminel87 said:
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??
Click to expand...
Click to collapse
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers
Dadditz said:
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers
Click to expand...
Click to collapse
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you
kriminel87 said:
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you
Click to expand...
Click to collapse
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers
Dadditz said:
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers
Click to expand...
Click to collapse
unlocking the bootloader done,what next !!!:good:
kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:
kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Flash the 3.1.1-1 recovery into your device:
( fastboot flash recovery 'nameofrecovery'.img )
You can also use some apps to flash .img files...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
If you have any doubt, just let me know....
Dadditz said:
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
Click to expand...
Click to collapse
thank you again you help me so mush i appreciate it :good:
kriminel87 said:
i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:
Click to expand...
Click to collapse
kriminel87 said:
thank you again you help me so mush i appreciate it :good:
Click to expand...
Click to collapse
Dude, my satisfaction is that everything went well ..
Thank you so much for all your feedback.
Cheers :highfive: