Phone stuck on Samsung logo after official update - Samsung Galaxy S7 Edge Questions and Answers

Hello everyone,
I have a Samsung 935f which has done an official update via WI-FI about 3 days ago.Since then the phone is stuck on Samsung logo and the only thing that I can do it's to reset it and put it on Download Mode.
I have tried to root the phone, which has failed
Also I have tried to put new firmware via ODIN witout luck.
I tried different version of firmware but they don't work..the phone it's still stuck.
Any help would be highly appreciated.
Thank you very much.

Related

grand prime smg531h has no usa firmware

hey I need help, recently changed my screen on my grand prime SMG531h. Upon start up, it is stuck on the boot screen. I tried to reset +vol. power/home but does nothing. Can access the down load screen. First I tried kies but it fails to see the device. I loaded the driver from samsung. it recognizes the device on pc but can't open. I have ODIN 307. I found firmware but no usa version. Can i use any version? Is there any available or what can i use? If i can get the firm ware i may be able save via odin. phone is just a firmware away...
pizmos said:
hey I need help, recently changed my screen on my grand prime SMG531h. Upon start up, it is stuck on the boot screen. I tried to reset +vol. power/home but does nothing. Can access the down load screen. First I tried kies but it fails to see the device. I loaded the driver from samsung. it recognizes the device on pc but can't open. I have ODIN 307. I found firmware but no usa version. Can i use any version? Is there any available or what can i use? If i can get the firm ware i may be able save via odin. phone is just a firmware away...
Click to expand...
Click to collapse
I am using the 531H in the US with Russian firmware (where I bought the phone) without problems. The firmware on mine is G531HXXU0AOH1 (just google it to find the download). BTW, English is included in it, so no problem there.

G900AZ Bricked!

Hi,
I have searched the web to find solutions to my cricket SM-G900AZ. After flashing G900AZTUU3BOG3_G900AZAIO3BOG3_G900AZTUU3BOG3_HOME.tar.md5 with Odin, the phone doesn't start up nor does not go into recovery mode. It only stops at the Samsung Galaxy S5 logo. It was working alright but after the OTA, which did not complete, it only gets to the samsung logo. Now I'm getting errors in Odin when trying to downgrade to G900AZTUU2BOE2_G900AZAIO2BOE2_G900AZTUU2BOE2_HOME. I tried Kies 3 but to no avail. PC can read phone alright as MT and modem but nothing on the screen.
What seems to be the problem here?

soft brick.no recovery.no boot.only download mode

i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
hey please help me i cant even go to download mode and recovery i was installing the stock firmware after that i had installed xenon rom for my sm-g530h it had some problems or bugs so i decided to install the downgrade stock firmware, when i started to install, it was not installing i tryed about 3 times, and now, i cant get any response now, i cant able to put in download mode or recovery, even it dont showing me the charging... please help me i cant detect it on my computer also please help me :crying:
facing same problem
mak3022 said:
i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
Click to expand...
Click to collapse
i am also facing same problem pls help me out if the solution is there/

How to unbrick?

hi, my s7 edge is on the emergency recovery screen after boot, already tried Smart Switch no success..
already tried install a lot of twrp versions by odin, no success either
tried to install some roms for my phone and got some error, the latest error was saying device 5 and binary 1 or 4 sometimes, i guess this is because my phone was at 8.0 and some rom i got is older right?
So, how can i find a rom with binary 5?
My model is SM-G935FD
This binary error says your bootloader has been updated. The only way to solve this is by installing the latest version of stock rom via odin.
Hello all,
I did something similar i add last update with odin but after restart i get error can't update software. I stupidly turn it off and now is in brick mode I mean nothing happent when i press all possible combination. I order JIG but unfortinaetly did work for S7 it works for my other samsungs. I probably will make my own JIG with 400Kom .
I just thinking any other hardware way to start it.
When i connect to PC i hear the sound connect but after couple seconds disconnect.
Any suggestion what else I can try

Help with Custom Rom

Hi everyone, I have a samung note 4 (SM N910C) and while using it just went off and when turned back on is stuck on the Samsung galaxy logo and wont get past it, tried pulling battery and memmory card and all as soft tricks from google but is of no use, so tried flashing a stock rom and odin shows pass at the end but the phone wont get past the samsung logo, checked and found need to do a format and all through recovery but i cant get into recocery either, havng error message recovery is not seandroid enforcing, tried flashing twrp but still odin pass and the error persists..
Anyone could be of any assistance please? Is there any workaround for this issue? Thank you in advance for the help..
Hello? Anybody plz.
try the PC program Smart Switch, you may succeed to get the emergency firmware installed on it
this might help

Categories

Resources