S7 OTG charging - Samsung Galaxy S7 Edge Questions and Answers

hello together, I have a small problem and although I wanted to plug my S7 Edge (DBT 8.0) with a Y-cable to a DAB + receiver and hang on the second input a power supply to charge the phone incidentally. I read that in the kernel a USB host file must be changed. Unfortunately, I could not find any custom firmware or kernel that can. Maybe you can help me?

Related

[Q] Which Kernel is supporting USB host mode power management extension ?

Like the N7 Timur kernel (http://mehrvarz.github.io/usb-host-mode-power-management-nexus7/).
I would plug an dac in my car with an Y cable and charge my phone in the same time. Not finding that kernel patch for GN3.

Otg on chroma 5.1.1

Hi everyone, I have been reading for like 2 weeks on how to get my USB otg to work, I have chroma 5.1.1 ROM and quatra v6, I had hellscore but of wasn't working either. I have the y cable and I have tried it with my battery bank supplying power and also with my charging cable. I have stick mount installed. Nothing is working, am I missing something?
I am not familiar with quatra v6, is there a setting in trickster related to OTG that you may need to enable that you missed? How about swapping USB drives and trying another one? Perhaps switch to Franco kernel and try OTG on that? I doubt it is the cable or power supply's fault, but maybe you should try switching out the cable or power supply for another one. Good luck.
Thanks for the advice, unfortunately it didn't help, I'm still working on it

(Q) Nexus 4 OTG

Good day everyone, I would like to ask why my phone does not support OTG. I need your suggestions.
First my nexus 4 runs on Paranoid Android Rom v5.1 with quanta kernel v18. I also made my own otg y cable by connecting the red and black wires. I tried to use otg but my phone does not connect to my flash drive. When I connect it, the phone charges and the flash drive blinks its led light so it means that my wiring is Ok. What could be the problem?
You need to use Stickmount.

N7 2012 Timurs kernel - only one USB device working.

Hi all.
I have nexus 7 and i prepare to install in car.
My nexus have:
Root, unlocked bootloader and i flash recovery TWRP.
I flash Timurs kernel from the rootzwiki
And download from the first URL: cm-10.1-20130817-USBROM-grouper
All working but i plug usb DAC > 5V 3A power supply and otg Y cable.
This working, music play with amplifier.
But i plug other device, pendrive or RTL2832u then DAC not working.
When unplug all devices and connected to OTG only DAC music working
How to attach files? upload only jpg from my wire OTG and hub
Im from Poland and do not use translate and i hope you will understand my problem and help to solve

usb otg and charging together posable?

hey im wondering if ther is any mod or whatever to allow charging and usb otg at the same time
thanks
phone is a sm-j510fn with the odyssey note8 rom installed

Categories

Resources