G935AUCU4BQG1 ODIN Files? - AT&T Samsung Galaxy S7 Edge Questions & Answers

Hi all.
I am trying to update my S7 Edge up to the latest build.
The phone was origionaly a Verizon phone.
But I was able to load it with the ATT filmware. and have been using my phone for over a year.
the only problem is ATT wont recognize the phone for updates.
I have it loaded up to G935AUCU4BQF3, but to keep updating it, ATT says I have to get to A935AUCU4BQG1.
I do not have the phone rooted, but have updated it successfully many times with ODIN.
Does anyone have the odin files?
Or can anyone tell me if I have to go in order of what ATT tells me the updates must go?
Or can i just jump way ahead?
Many thanks from a Semi-noob.
Thanks!

Related

[Q] Can't update to 4.4.4

I have the Samsung Galaxy S4 (I337) It's unlocked and currently using it on T-Mobile's network.
It's running Android 4.4.2 and I am trying to update to Android 4.4.4 but it always says "Software Update Interrupted" & when I try to update again it says "Software up to date, try again in 24 hours".. I contacted AT&T and they said to turn data off and leave WiFi on and try again. I did and this time it did take longer to look for update but it said the same thing again. I contacted Samsung and they told me to try the "Samsung Kies 3" method, I did but it said " 'SGH-1337' does not support initializing." I told Samsung & they told me to go to a local Best Buy and ask them to upgrade the software for me.... But I don't really have time for that, so can somebody please tell why it's doing this / how can I fix this problem? / how can I update it?...
By the way, no , my phone isn't rooted.
Reset
Try removing youre sim card and doing a factory reset and go through the setup only connected to wifi and then check to see if it will upgrade that way
juandbz_ said:
I have the Samsung Galaxy S4 (I337) It's unlocked and currently using it on T-Mobile's network.
It's running Android 4.4.2 and I am trying to update to Android 4.4.4 but it always says "Software Update Interrupted" & when I try to update again it says "Software up to date, try again in 24 hours".. I contacted AT&T and they said to turn data off and leave WiFi on and try again. I did and this time it did take longer to look for update but it said the same thing again. I contacted Samsung and they told me to try the "Samsung Kies 3" method, I did but it said " 'SGH-1337' does not support initializing." I told Samsung & they told me to go to a local Best Buy and ask them to upgrade the software for me.... But I don't really have time for that, so can somebody please tell why it's doing this / how can I fix this problem? / how can I update it?...
By the way, no , my phone isn't rooted.
Click to expand...
Click to collapse
Are you rooted? Once it downloads it probably won't flash correctly.
Do you have a ATT SIM card? I believe you HAVE TO be connected to ATT to get the update. It won't update if your on T-Mobile network.
What firmware are you on? Depending on what firmware you are on you should be able to find the stock .cfg file here in this forum somewhere. You MAY need to INCREMENT each update manually though. For example if your on NB1 you would need to flash in stock recovery the .cfg file for the next firmware to NC1. THEN flash the next .cfg from NC1 to NJ4 (or something along those lines with each firmware). NJ4 is the newest so you will end up there.
Give more info on what your firmware is? If rooted or stock? If custom recovery or stock? Any other info so others can help guide you better.
RockRatt said:
Are you rooted? Once it downloads it probably won't flash correctly.
Do you have a ATT SIM card? I believe you HAVE TO be connected to ATT to get the update. It won't update if your on T-Mobile network.
What firmware are you on? Depending on what firmware you are on you should be able to find the stock .cfg file here in this forum somewhere. You MAY need to INCREMENT each update manually though. For example if your on NB1 you would need to flash in stock recovery the .cfg file for the next firmware to NC1. THEN flash the next .cfg from NC1 to NJ4 (or something along those lines with each firmware). NJ4 is the newest so you will end up there.
Give more info on what your firmware is? If rooted or stock? If custom recovery or stock? Any other info so others can help guide you better.
Click to expand...
Click to collapse
I tried doing the Kies method again and I have to say, I'm stupid for it... the phone upgrade failed & now it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" it wont let me use my phone at all anymore... help
try here
http://forum.xda-developers.com/gal...ng-rooting-t2926642/post56453100#post56453100

Upgrading an old phone

There are lots of excellent instructions for rooting and customizing this phone (kudos to painiac and jrkruse) but I am going the opposite direction.
I just got a Note 7 to replace my S5 and I am sending the S5 to a daughter who isn't tech savy enough to deal with anything but a stock phone. I want to send the phone to her with the latest DPF4 build but cannot locate a stock image to run thru ODIN.
When I tried an OTA update, it failed with the 'Update service is temporarily unavailable' message. This is because the phone is no longer recognized by Verizon. Doesn't matter that I am using WIFI and not VZN network.
I see two ways to proceed. 1) Call VZN and activate the S5 then run OTA update, then call back and activate Note 7.
OR-- 2) Locate stock image DPF4 and ODIN the S5.
Sooo... Anybody know where I can download the stock image DPF4?
What you do is flash a stock image ok3 firmware or later with odin or heimdall then connect phone to sidesync or kies3 by usb and voila it will upgrade you to pf4 stock
You can't downgrade to KitKat at least easily so that is why I said ok3 firmware or later
Thanks for the suggestion. However, I called Verizon and they explained how I could switch back and forth thru the online portal. They handled the reverse switch since I was already talking to them and I switched back on my own after all the upgrades. Shipped the phone out earlier today.
Super easy!
For future reference, you do not have to have active service on the device to get an OTA.
My S5 has never been active since I've had it and I was able to pull the OTA just fine via wifi.
I thought I would be able to do that, but got the error message when I tried. I searched for a solution and found a thread that explained that the device needed to be active in order for the Verizon update server to recognize it. If yours works without being active that's great. Mine didn't.

Problem with my G935A

Hi, I got a S7 Edge SM-G935A from AT&T at the end of December.
That same night I tried to root my phone(i got a bootloop), and I didn't know the bootloader was locked.
So I re-flashed a SM-G935U rom, but I would like to go back to the basic one in order to get a new start(SM-G935A), without root and nothing.
Knowing that I have a problem connecting to the wifi, maybe because of the rom that doesn't match.
And also i dont have samsung updates, i'd like to have the latest one im currently on 7.0.
If someone could help me to get my phone with original firmware, I'd be grateful.
Ok, first off, you can run any US/Qualcomm variant software on your device. Unless you just have a hankering for AT&T firmware, the U firmware will work just fine. Either way, find a full copy of either A or U firmware and ODIN it down, and you will essentially factory reset your device in the process.
There are links to both in this forum. I personally prefer U because it is faster and less bogged down with carrier crap, but if you are an AT&T customer, there are decent enough reasons to stick with A.
NOTE: you may need to use Prince Comsy's ODIN tool if you get a mismatch error. Unfortunately, there is no universal ODIN tool, but as a general rule, if you are CHANGING variants you need Prince's. If you are writing over the same version, you need the official.
jshamlet said:
Ok, first off, you can run any US/Qualcomm variant software on your device. Unless you just have a hankering for AT&T firmware, the U firmware will work just fine. Either way, find a full copy of either A or U firmware and ODIN it down, and you will essentially factory reset your device in the process.
There are links to both in this forum. I personally prefer U because it is faster and less bogged down with carrier crap, but if you are an AT&T customer, there are decent enough reasons to stick with A.
NOTE: you may need to use Prince Comsy's ODIN tool if you get a mismatch error. Unfortunately, there is no universal ODIN tool, but as a general rule, if you are CHANGING variants you need Prince's. If you are writing over the same version, you need the official.
Click to expand...
Click to collapse
Im not living in the USA and AT&T doesnt exist where i live, but sometime i have a issue with my wifi "internet may not be available" is because of the rom?
Leqz said:
Im not living in the USA and AT&T doesnt exist where i live, but sometime i have a issue with my wifi "internet may not be available" is because of the rom?
Click to expand...
Click to collapse
Then this is easy. Go download the U firmware and use Prince's ODIN to convert it to a G935U. If you aren't on an AT&T network there is zero reason to keep your device on A firmware, starting with the fact that you will never get updates. (AT&T firmware will only update if you have an AT&T SIM installed.)
jshamlet said:
Then this is easy. Go download the U firmware and use Prince's ODIN to convert it to a G935U. If you aren't on an AT&T network there is zero reason to keep your device on A firmware, starting with the fact that you will never get updates. (AT&T firmware will only update if you have an AT&T SIM installed.)
Click to expand...
Click to collapse
Only add-on is to perform this from a Windows 7 pc and not 10. Prince kept crashing on 10 and worked fine on 7.

Updating when using an MVNO...

Hello!
I've never used a phone that is specific to one carrier. All my phones have been unlocked.
My girlfriend has a Verizon Samsung S7 edge and I've convinced her to ditch Verizon and go with StraightTalk with a Verizon compatible SIM. I hadn't considered software updates since I typically update my phone directly from the manufacturer or by flashing a custom ROM.
is it still possible to install an OTA update to her phone since she no longer has an account with Verizon? Or do i have to unlock her bootloader, download the latest update, and use Odin to manually install it?
Her phone is not rooted and it will be a battle to convince her to let me do it.
Any help would be greatly appreciated!
Probably the easiest for you is to install on the phone and on PC the Samsung SmartSwitch: https://www.samsung.com/us/support/downloads/
Inside that app, while the phone is connected via USB to the PC, if there are any updates for the phone, they will show up and you can install them.
BTW, if you want to change the firmware to "U" version, Odin flashes the official files without root, phone remains in original untouched state.
Personally I have flashed "U" firmware over my "V" S7 Edge, just to gain access to hotspot, using this thread to make the switch (I was on Nougat then). I am using Total Wireless (same SIM as StraightTalk, both owned by Tracfone) and, since then, I got the updates for Oreo and the following security update.

Links for AT&T USERDATAs

I know these are much tougher to find - can't be obtained from SamFirm or SamMobile. So I'll be uploading one for each bootloader version. Firmware is universal on U models so you can use the other 4 files from any other matching collection. Can probably even mix and match builds, if you can't find files for the exact same build. Can't mix and match bootloaders though, so the other 4 files have to at least be from the same bootloader.
USERDATAs for any other CSCs can be gotten from SamFirm - for the latest version. If you need an old USERDATA for a CSC that's not commonly found on SamMobile (ACG, LRA, TFN, etc), let me know and I can probably get it.
https://www.androidfilehost.com/?w=files&flid=283206
Can I use the userdata file for G55USQU5CRF5 with the other four files being from the build G55USQS5CRF5? I'm not sure what the difference between SQU and SQS is, and if it is significant. Thank you!
zeiguy17 said:
Can I use the userdata file for G55USQU5CRF5 with the other four files being from the build G55USQS5CRF5? I'm not sure what the difference between SQU and SQS is, and if it is significant. Thank you!
Click to expand...
Click to collapse
Yes, you can. There basically is no difference
I'm begging someone to help me. I flashed my AT&T S8+ to the G955U1 unlocked firmware, then got accepted into the beta and installed it via OTA update. I now want to go back to a AT&T rom so I can have stuff like Wi-fi calling and VOLTE back. I've tried so many different roms with ATT userdata and they all fail with ODIN. I'm guessing its something to do with bootloader version. Is there any way I can get back to a AT&T ROM from the G955U1 Pie beta firmware.
sean8102 said:
I'm begging someone to help me. I flashed my AT&T S8+ to the G955U1 unlocked firmware, then got accepted into the beta and installed it via OTA update. I now want to go back to a AT&T rom so I can have stuff like Wi-fi calling and VOLTE back. I've tried so many different roms with ATT userdata and they all fail with ODIN. I'm guessing its something to do with bootloader version. Is there any way I can get back to a AT&T ROM from the G955U1 Pie beta firmware.
Click to expand...
Click to collapse
Well the beta has to still be Bootloader 5, so just flash any 5 build
iBowToAndroid said:
Well the beta has to still be Bootloader 5, so just flash any 5 build
Click to expand...
Click to collapse
I finally managed to get Odin to flash a ROM. All of them I tried were bootloader 5. But now the problem is I cant get OTA updates. My phone is back to being a AT&T one with the AT&T boot screen and wi-fi calling etc etc. But everytime I check for updates it says its up to date even though I have CRL1 and the latest AT&T firmware is U5CSA4. I would update form SD card but that wipes the phone every time. I had to do that 4 or 5 times just to get to CRL1 because it kept saying my phone is up to date.
sean8102 said:
I finally managed to get Odin to flash a ROM. All of them I tried were bootloader 5. But now the problem is I cant get OTA updates. My phone is back to being a AT&T one with the AT&T boot screen and wi-fi calling etc etc. But everytime I check for updates it says its up to date even though I have CRL1 and the latest AT&T firmware is U5CSA4. I would update form SD card but that wipes the phone every time. I had to do that 4 or 5 times just to get to CRL1 because it kept saying my phone is up to date.
Click to expand...
Click to collapse
1. AT&T phones don't OTA if you're using a carrier other than AT&T - even their own MVNOs
2. If you are using AT&T, OTA rollouts are staged. It just came out less than a week ago, so your phone might not have been green-lit yet
3. Both 1 and 2 are really irrelevant anyways, because you can just Odin flash any update you want. Using HOME CSC will ensure data isn't wiped
iBowToAndroid said:
1. AT&T phones don't OTA if you're using a carrier other than AT&T - even their own MVNOs
2. If you are using AT&T, OTA rollouts are staged. It just came out less than a week ago, so your phone might not have been green-lit yet
3. Both 1 and 2 are really irrelevant anyways, because you can just Odin flash any update you want. Using HOME CSC will ensure data isn't wiped
Click to expand...
Click to collapse
I am using AT&T. I know rollouts are staged but I've never had it tell me my phone is up to date when it is 7 versions behind which it was because I had to start at CRF5 since that is the newest AT&T Userdata file I could find. I checked after doing the update from SD card method each time, making sure to put the date on my phone forward since AT&T only lets you manually check once a day. No matter what it said I was up to date despite being several versions behind.
I'm gonna try using Odin to flash one more time because not being able to do OTA update is a HUGE PIA. Dose it matter that the user data is called "ATT_G955USQU5CRF5" despite the firmware being USQS because I couldn't find a USQUCRF5 and besides AT&T's update history shows USQSCRF5 anyways. What I did was downloaded a verizon G955USQS5CRF5 ODIN file (because for some reason AT&T odin files are really hard to find) and replaced the Verizon user data with the AT&T one.
Also if I flash say CSA4 verizon with the verizon user data the put my AT&T sim card in it dose it not download all the the carrier bloatware and what not? dose that basically turn it back into a AT&T phone? or could I take that CSA4 and flash it with the CRF5 AT&T user data?
sean8102 said:
I am using AT&T. I know rollouts are staged but I've never had it tell me my phone is up to date when it is 7 versions behind which it was because I had to start at CRF5 since that is the newest AT&T Userdata file I could find. I checked after doing the update from SD card method each time, making sure to put the date on my phone forward since AT&T only lets you manually check once a day. No matter what it said I was up to date despite being several versions behind.
I'm gonna try using Odin to flash one more time because not being able to do OTA update is a HUGE PIA. Dose it matter that the user data is called "ATT_G955USQU5CRF5" despite the firmware being USQS because I couldn't find a USQSCRF5 and besides AT&T's update history shows USQSCRF5 anyways. What I did was downloaded a verizon G955USQS5CRF5 ODIN file and replaced the Verizon user data with the AT&T one.
Also if I flash say CSA4 verizon with the verizon user data the put my AT&T sim card in it dose it not download all the the carrier bloatware and what not? dose that basically turn it back into a AT&T phone? or could I take that CSA4 and flash it with the CRF5 AT&T user data?
Click to expand...
Click to collapse
1. I have no idea what the difference is between SQS and SQU. Even on the same network, it seems to be completely random as to which one gets assigned to each new update. I don't think it matters
2. Don't flash userdata if you're going to Odin flash a different carrier's version. Just do the normal 4 files
Sorry for the late reply. But just wanted to say that this method of getting from a G955U1 (US Unlocked) firmware back to AT&T branded firmware did end up working. I did eventually start getting OTA updates after using the method I mentioned (flashing Verizon USQS5CRF5 ROM files with AT&T G955USQS5CRF5 USERDATA file using ODIN Odin3 v3.13.1 3B Patched). Then updating to the then latest version using the update.zip method using files from the "Firmware Science" site (I think that's the name). Then about two days after AT&T released a new update I actually got it OTA. However after it installed successfully my chrome app became broken. Opening it and hitting the ... button in the top right would open the menu but all the options just said "chrome". Tried clearing the cache and files of Chrome but then it just crashed when launched. Had to do a reset (not a big deal since I had a Samsung SmartSwitch backup on my SD Card). Just hope that dose not happen every OTA, but guessing it was a weird fluke.
sean8102 said:
Sorry for the late reply. But just wanted to say that this method of getting from a G955U1 (US Unlocked) firmware back to AT&T branded firmware did end up working. I did eventually start getting OTA updates after using the method I mentioned (flashing Verizon USQS5CRF5 ROM files with AT&T G955USQS5CRF5 USERDATA file using ODIN Odin3 v3.13.1 3B Patched). Then updating to the then latest version using the update.zip method using files from the "Firmware Science" site (I think that's the name). Then about two days after AT&T released a new update I actually got it OTA. However after it installed successfully my chrome app became broken. Opening it and hitting the ... button in the top right would open the menu but all the options just said "chrome". Tried clearing the cache and files of Chrome but then it just crashed when launched. Had to do a reset (not a big deal since I had a Samsung SmartSwitch backup on my SD Card). Just hope that dose not happen every OTA, but guessing it was a weird fluke.
Click to expand...
Click to collapse
Hey I am in the same boat. Can you please help pointing to the files you used to ODIN to get back to ATT version.
SC1 USERDATA was added a few days ago, for anyone wanting to jump to Pie
USERDATA added for bootloader 6
USERDATA added for bootloader 7
Ive been researching and reading most of the day about returning to stock on an att 955u. The only download i can find that wont take 6 hours is from samfirm and is G955USQS7DSL2. Can i use this and the userdata from your link to return this back to stock?
jetracer said:
Ive been researching and reading most of the day about returning to stock on an att 955u. The only download i can find that wont take 6 hours is from samfirm and is G955USQS7DSL2. Can i use this and the userdata from your link to return this back to stock?
Click to expand...
Click to collapse
Since the USERDATA is TA5, I would recommend using a build that's closer to that one. You can get TA3 from SamFirm under regions/CSCs ACG, CCT, LRA, SPR, TFN, or VZW.
When you say "returning to stock", what firmware is currently on the device?
iBowToAndroid said:
Since the USERDATA is TA5, I would recommend using a build that's closer to that one. You can get TA3 from SamFirm under regions/CSCs ACG, CCT, LRA, SPR, TFN, or VZW.
When you say "returning to stock", what firmware is currently on the device?
Click to expand...
Click to collapse
I was on a verizon build. I ended up returning to stock with G955USQS6DSG4, got one update and now says no firmware. Currently shows G955USQU6DSH8.
SamMobile actually had pretty decent speed.
jetracer said:
I was on a verizon build. I ended up returning to stock with G955USQS6DSG4, got one update and now says no firmware. Currently shows G955USQU6DSH8.
SamMobile actually had pretty decent speed.
Click to expand...
Click to collapse
Do you have all of AT&T's apps and bloatware now? If so, it should be updating at least to SJ3, if not up to TA5. You would need an active AT&T SIM inserted in order to pull the update though
iBowToAndroid said:
Do you have all of AT&T's apps and bloatware now? If so, it should be updating at least to SJ3, if not up to TA5. You would need an active AT&T SIM inserted in order to pull the update though
Click to expand...
Click to collapse
Yea just uninstalled and disabled a bunch of att and samsung bloat. I am currently running an att sim. Should i possible download the v7 files and try again? Shouldn't matter that the firmware was from "tmobile" right its the userdata that counts iirc.
jetracer said:
Yea just uninstalled and disabled a bunch of att and samsung bloat. I am currently running an att sim. Should i possible download the v7 files and try again? Shouldn't matter that the firmware was from "tmobile" right its the userdata that counts iirc.
Click to expand...
Click to collapse
What do the 3 service provider codes show as, under Software Information?

Categories

Resources