my zuk z1 is already have Unlocked boot loader and Installed custom TWRP recovery. then i change my rom from ZukUI to dotOS. then i planned to update my recovery... then i download latest build of twrp and i tried to install through twrp old version.. i flashed the .img too/then i restart the mobile into Recovery. its only run the bootloader... i cant open that in a RECOVER MODE. and if i need to install that again , i need root my mobile. but my mobile device model, its said, Unknon... what can i do.. help me guys
Praveenvee said:
my zuk z1 is already have Unlocked boot loader and Installed custom TWRP recovery. then i change my rom from ZukUI to dotOS. then i planned to update my recovery... then i download latest build of twrp and i tried to install through twrp old version.. i flashed the .img too/then i restart the mobile into Recovery. its only run the bootloader... i cant open that in a RECOVER MODE. and if i need to install that again , i need root my mobile. but my mobile device model, its said, Unknon... what can i do.. help me guys
Click to expand...
Click to collapse
It doesn't make sense if you open another post on following problems. Please provide more information which recovery you have and which one(link) you want to flash.
Have you been able to flash twrp he new recovery through fastboot like the first time?
strongst said:
It doesn't make sense if you open another post on following problems. Please provide more information which recovery you have and which one(link) you want to flash.
Have you been able to flash twrp he new recovery through fastboot like the first time?
Click to expand...
Click to collapse
i flashed twrp and installed dotos..then i would like to update my recovery. then i flashed twrp 3.2.1 , after installed in my recovery partition, i choose reboot to recovery. while it booting into recovery, it shows fastboot mode only.
its says,
"Fastboot mode
Status : Unlocked"
"https://dl.twrp.me/kenzo/twrp-3.2.1-0-kenzo.img.html" from here i downloaded
Praveenvee said:
i flashed twrp and installed dotos..then i would like to update my recovery. then i flashed twrp 3.2.1 , after installed in my recovery partition, i choose reboot to recovery. while it booting into recovery, it shows fastboot mode only.
its says,
"Fastboot mode
Status : Unlocked"
"https://dl.twrp.me/kenzo/twrp-3.2.1-0-kenzo.img.html" from here i downloaded
Click to expand...
Click to collapse
You flashed the twrp for Redmi note 3 which codename is "Kenzo".
The zuk z1 has codename "ham".
Please watch the right recovery before you download and flash
strongst said:
You flashed the twrp for Redmi note 3 which codename is "Kenzo".
The zuk z1 has codename "ham".
Please watch the right recovery before you download and flash
Click to expand...
Click to collapse
m yah..i found my device name as "Ham" but i done the flash unfortunately, now what can i do to recover again..? i need help and i cant root my device also.. because " Device Model : Unknown " in my "about phone option in settings.
and when am connected to device with pc, it shows device name as " MTP device ". in this situation i cant configure my adb for install twrp again,meanwhile i tried to root via KingRoot , its also shows "Unknown device" and cant root now..Try again what can i do now..? help me please:crying:
Praveenvee said:
m yah..i found my device name as "Ham" but i done the flash unfortunately, now what can i do to recover again..? i need help and i cant root my device also.. because " Device Model : Unknown " in my "about phone option in settings.
and when am connected to device with pc, it shows device name as " MTP device ". in this situation i cant configure my adb for install twrp again,meanwhile i tried to root via KingRoot , its also shows "Unknown device" and cant root now..Try again what can i do now..? help me please:crying:
Click to expand...
Click to collapse
You bricked your device by flashing a wrong firmware and twrp....
Let's have a look at here, especially the qpst method in the video https://forum.xda-developers.com/zuk-z1/help/zui-rom-qpst-qfil-fastboot-issue-t3632025
strongst said:
You bricked your device by flashing a wrong firmware and twrp....
Let's have a look at here, especially the qpst method in the video https://forum.xda-developers.com/zuk-z1/help/zui-rom-qpst-qfil-fastboot-issue-t3632025
Click to expand...
Click to collapse
but i changed my os from CyanogenMod 12.1 to DotOS Naugat 7.1.2
is it work with that..?
the main problem is my device Model says Unknown.. How i configure that with my phone
Praveenvee said:
but i changed my os from CyanogenMod 12.1 to DotOS Naugat 7.1.2
is it work with that..?
the main problem is my device Model says Unknown.. How i configure that with my phone
Click to expand...
Click to collapse
Have you used actual drivers for zuk z1? You'll find them in the root guide for example.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
strongst said:
Have you used actual drivers for zuk z1? You'll find them in the root guide for example.
Click to expand...
Click to collapse
i'll try with my laptop... i'll post a reply whether its works or not..!
and dont angry with me, I've a double,
is adb or something will recognize my device while its showing "device model as Unknown"
https://drive.google.com/open?id=1rzdG702z0AmOQGq4z6GFTKTfCWi4ZM-E
https://drive.google.com/open?id=1p5BTzBQhFNrFzRnl_xpAA7gm4_fmNq9l
thank you so much my senior
i've try that. and it was work for me..
now am using RR 7.1.2 Nougat..
but it sucks battery of my device.
strongst said:
Have you used actual drivers for zuk z1? You'll find them in the root guide for example.
Click to expand...
Click to collapse
I've problem on using Camera Fv-5 ..and Enabling camera 2 api..ot doesn't Workss
Related
I have good experience with other phones but this is my first time working with ZE550KL.
So I took my uncle's phone and he asked me to update his phone to the latest firmware to get the VoLTE feature.
He is was on ZE550KL_WW_21.40.1220.1708 which is Marshmallow of the ZEN UI.
I have downloaded the latest firmware from the ASUS website but I couldn't update it because the recovery which came with the marshmallow update is broken.
These are the errors I got
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is what I did, and hope this works for everyone.
Hoping that you already went and searched about the problem over the internet.
These are the things you need to download :
ADB and fastboot
https://drive.google.com/file/d/0B0aDjdU4gTwZZW1HUHhqWnEteXM/view
Recovery image file
https://drive.google.com/open?id=0B0aDjdU4gTwZa1MyUmVPN3BhQjQ
Latest firmware:
https://www.asus.com/in/support/Download/39/1/0/22/ZROQURlyupei1ZQz/32/
1. Download the adb and fastboot drivers. Download the latest firmware and copy it onto your internal storage.
2. Boot into the bootloader.
3. Download the recovery image and paste it into the adb folder.
4. Now type the following command.
Code:
fastboot flash recovery recovery.img
5. This step is very important.
Now, all you have to do is hold the power button and the volume down button to boot into the installed recovery.
Remember that if you restart your phone after step 4, your old recovery(which does not work) will still be there.
6. Now select update from sdcard and select the zip file of the latest firmware you downloaded.
7. It will take at least 10 minutes to install, don't panic if you think the screen froze.
I hope this solves the issues many users are facing.
Feel free to ask questions, I will be very happy to answer.
The recovery we installed is the recovery of Android Lollipop version of the Zen UI ROM.
Thanks. It worked. The only difference is that after flashing the old recovery, my SD card was showing blank. So i selected the adb sideload option and flashed the new build.. Thanks for your guide.
Thanks but few doubts remain. The recovery you used is from Lollipop`s 1.17.40.1503 right?
Can we not do this by installing a temporary recovery image (twrp)?
I have also read elsewhere ( https://devs-lab.com/e-unable-to-mount-asdf-recovery-error-solved.html ) that you would need the boot image too. But your instructions are way too easier and easy to follow. Why don't you use boot image?
If we are using the boot image then which version of it should we use?
hellbraker said:
Thanks but few doubts remain. The recovery you used is from Lollipop`s 1.17.40.1503 right?
Can we not do this by installing a temporary recovery image (twrp)?
I have also read elsewhere ( https://devs-lab.com/e-unable-to-mount-asdf-recovery-error-solved.html ) that you would need the boot image too. But your instructions are way too easier and easy to follow. Why don't you use boot image?
If we are using the boot image then which version of it should we use?
Click to expand...
Click to collapse
Before I tried any of this... First thing I did was boot TWRP and install the lastest firmware.
But I couldn't do so because TWRP doesn't let you flash .img files.
And for the best result it is always better for you to use the official recovery to flash an official firmware.
Because ASUS f***ed up, I needed to install the previous version of the recovery to flash the firmware.
And I'm very happy that my guide worked for you.
Don't forget to give thanks. :laugh:
I haven't tried it yet. So you didn't tamper with boot.img at all. Right?
Also as previously asked what's the build number from which you extracted the recovery.img? Is it from .1503?
My current build is .1708 same as what you worked on. And will data get erased during this process?
How can I boot into the bootloader? is it by unlocking it? or is there any other non-invasive way?
Update: I installed as per your instructions. Device shows "Optimizing app 5 of 51".
Thank you.
Thank you
Thank you sir, this helped me a lot.
recovery link is asking need access plzz help
My Asus Zenfone doesn't boot anymore and doesn't even allow me to factory reset it from the bootloader. How to force reset it??
I was using yu yureka plus. Then i try to root it so i tried to unlock bootloader then i flash recover IMG and then phone stuck at TEAMWIN logo and keep restarting so i tried to flash stock room by using fastboot. It goes well as i thought. But when i try to restart my phone looks like this (as shown in image)and same in fastboot mode(i try to boot in fastboot mode by using volume up key and then plug in pc) help me to solve this thank you
I used this post toflash stock
https://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Lenovo A6020a40 using XDA-Developers Legacy app
himanshubarala said:
I was using yu yureka plus. Then i try to root it so i tried to unlock bootloader then i flash recover IMG and then phone stuck at TEAMWIN logo and keep restarting so i tried to flash stock room by using fastboot. It goes well as i thought. But when i try to restart my phone looks like this (as shown in image)and same in fastboot mode(i try to boot in fastboot mode by using volume up key and then plug in pc) help me to solve this thank you
I used this post toflash stock
https://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621
Click to expand...
Click to collapse
Flash ROM using ygdp tool.
Get it from www.firmwarefile.com:good:
nischait said:
Flash ROM using ygdp tool.
Get it from www.firmwarefile.com:good:
Click to expand...
Click to collapse
Thanks man it's help now i am on kitket trying to update... Any suggestions please to update
Sent from my Lenovo A6020a40 using XDA-Developers Legacy app
himanshubarala said:
Thanks man it's help now i am on kitket trying to update... Any suggestions please to update
Click to expand...
Click to collapse
Which version you flashed through ygdp 1st second or last?
I flashed last one but when I unlocked it flash twrp it stucks on yu logo
Then I flashed 1st version then everything works well but not get volte in aosp extended ,quarkos and in miui8 also.
Someone suggests me to install official 12.1 signed zip to get volte but I don't tried it if you have then install it first through twrp or default recovery.
After that install any custom ROM and please report me. Also hit thanks my post which helps you.
I tried from a YouTube video by same method now I am on 4.4.4
Sent from my YU5510A using XDA Free mobile app
himanshubarala said:
I tried from a YouTube video by same method now I am on 4.4.4
Click to expand...
Click to collapse
Unlock bootloader now
In settings developer option
Check OEM unlocking
USB debugging
Update recovery with system updates
Use adb & fastboot commands.
See my op for same.
Achualy I was trying to unlock boot loader after that I stuck at blue lines now little afraid to do that again
Sent from my YU5510A using XDA Free mobile app
himanshubarala said:
Achualy I was trying to unlock boot loader after that I stuck at blue lines now little afraid to do that again
Click to expand...
Click to collapse
You have solution for revive your phone then why are you daring ? Anyway if you are satisfied with stock then don't do unlocking.
I am not satisfied with stock rom... And you are right about unlocking but I will do it when I get another phone...
Sent from my YU5510A using XDA Free mobile app
himanshubarala said:
I am not satisfied with stock rom... And you are right about unlocking but I will do it when I get another phone...
Sent from my YU5510A using XDA Free mobile app
Click to expand...
Click to collapse
Hey buddy i was trying to install recovery but i failed i tryied your mathod to do thata my bouutloader unlock says true(is my bottloader unlocked or not please tell). Than i installed recovery file using recovery command in cmd but nothing is showing in recovery mode when i try to do boot in recovery its just restart and boot into kitkat
Any suggestion how to boot in recovery
Sent from my YU5510A using XDA-Developers Legacy app
himanshubarala said:
Hey buddy i was trying to install recovery but i failed i tryied your mathod to do thata my bouutloader unlock says true(is my bottloader unlocked or not please tell). Than i installed recovery file using recovery command in cmd but nothing is showing in recovery mode when i try to do boot in recovery its just restart and boot into kitkat
Any suggestion how to boot in recovery
Click to expand...
Click to collapse
Your bootloader is unlocked if it showing true
Now flash twrp 2.8.7.0 through fastboot
fastboot -i 0x1ebf flash recovery twrp 2.8.7.0.img
When done
Disconnect phone
Remove battery & insert again after 1 minute
Press and hold volume+ , volume- & power key
When yu logo appears hold volume + & volume -
For few seconds. Twrp logo appears and you got twrp installed successfully.
Miui 8 for yureka
Please help me in this thing . I am very annoyed , when i flash miui 8 it works well but when i use the device it automatically restarts again and again please help me with the rom or give me a step by step tutorial how to fix autorestart or bootloop and heating and battery draining issue of yu yureka
TORAD said:
Please help me in this thing . I am very annoyed , when i flash miui 8 it works well but when i use the device it automatically restarts again and again please help me with the rom or give me a step by step tutorial how to fix autorestart or bootloop and heating and battery draining issue of yu yureka
Click to expand...
Click to collapse
Do a clean flash
Wipe everything
Install ROM
Wipe dalvik cache
Done
Try it
It is the same problem as written here : https://forum.xda-developers.com/p8...awei-p8-lite-2017-pra-lx1-brick-trwp-t3660664
I've followed every steps, but my phone is still bricked.
My build version is (I guess?) PRA-LX1C432B100
I tried several firmware builds to restore on, but when I try to install it (by pushing POWER / VOL - / VOL +) :
- PRA-LX1C530B130 : firmware versions mismatch
- PRA-LX1C33xxxx : can't install, I don't remember error message but surely the same as the above one.
- PRA-LX1C432B128 : "Installing update" at 5% then "Software install failed" with sub message "Get help from http://www.emui.com/emotiondownload?mod=restore"
I followed the rooting method from a french website that was for build PRA-LX1C432B100 but I can't find this firmware anywhere.
Can someone have the link ? Tried with Firmware Finder.. Now i'm downloading from needrom but still don't know if it's for the good build version...
When the phone boots, it displays :
- HW Logo
- Warning about the BL
- HW logo
- blank
- HW logo
- Warning about the BL
- erestore
When trying to download and reboot from erestore, it says "Getting package info failed" and thus, can't download.
----
TWRP
I also tried to flash PRA-LX1C530B130 update.zip, but I get the exact same thing as here : https://forum.xda-developers.com/attachment.php?attachmentid=4008385&d=1484772172
---
Any way to unbrick this d*mn thing ?
I need help, thank you.
Your phone is locked. Try the unlocking by huawei unlockcode.
Thank you for this fast answer,
though, where do I enter the code(s) ?
I went to https://tools.texby.com/unlock-codes/huawei/ to obtain my code, is that correct ?
I entered fastboot, no devices found with "huawei code writer"
Same with recovery mode and eRecovery :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do this command in fastbootmode by adb:
fastboot oem unlock 1234567...... (your unlock code from Huawei.
Oh okay, but i'm already unlocked.
...
FAILED (remote: already fastboot unlocked)
finished. total time: 0.004s
Click to expand...
Click to collapse
Ok., then flash the stock recovery again and make a factoryreset.
I can't find the stock recovery on internet nor on Firmware Finder. Do you know where I can find PRA-LX1C432B100 ?
I flashed many times on differents build versions those files :
recovery.img
boot.img
system.img
cust.img
Do I need to only flash the stock recovery (if I can find it..) to make everything else work ?
if I have no stock system nor stock boot, will it boot ?
And by "stock" I mean "stock for my device" because I've tried many stock images that end up in erecovery, even after a factory reset in the stock recovery.
-- EDIT --
With the mobile app, it says that the PRA-LX1C432B100 has been removed from the server.
Flash TWRP and see if it starts there.
ChinHon said:
Flash TWRP and see if it starts there.
Click to expand...
Click to collapse
Flashed TWRP.
Can still not boot on system (it's going on eRecovery) but sure I can boot in TWRP.
You have removed the usb cable during the reboot?
I have bricked my phone, can't install rom from erecovery becouse doesn't retrive update from server. What can I do?
I'm disperate can you help me?
ChinHon said:
You have removed the usb cable during the reboot?
Click to expand...
Click to collapse
Yes I did
Sw0ut said:
Yes I did
Click to expand...
Click to collapse
Ah, but I did it again and it worked.
Go TWRP and I can boot. I can indeed see my build version which is PRA-LX1C432B164.
I can boot, so i'm gonna follow the tutorial again.
Thanks.
Sw0ut said:
Ah, but I did it again and it worked.
Go TWRP and I can boot. I can indeed see my build version which is PRA-LX1C432B164.
I can boot, so i'm gonna follow the tutorial again.
Thanks.
Click to expand...
Click to collapse
:good:
Hello,
I had successfully installed TWRP when I was in B03 on my Axon 7 version G but since I have done an update.
Screenshot History
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Currently
I Can not reinstall twrp-3.1.1-0-ailsa_ii.img
What is the right procedure
Can you help me because I do not know what to do
thank you in advance
The manual old fashioned way?
Or with axon7tool and a 64bit windows computer.
marcus.linkenbach said:
The manual old fashioned way?
Or with axon7tool and a 64bit windows computer.
Click to expand...
Click to collapse
Thank you for your reply
With B03 I followed this tutorial
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
But I also tried this tuto since I installed nougat
https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
What is the difference of these 2 tutos ?
Which is best to follow
Best regards
Seem to be the same. But it easy to use the manual way.
adb reboot fastboot
fastboot flash recovery twrp.img
Or simply use the axon7 toolkit
https://forum.xda-developers.com/showthread.php?t=3573108
marcus.linkenbach said:
Seem to be the same. But it easy to use the manual way.
adb reboot fastboot
fastboot flash recovery twrp.img
Or simply use the axon7 toolkit
https://forum.xda-developers.com/showthread.php?t=3573108
Click to expand...
Click to collapse
That way only works if you actually have the bootloader mode, and if you updated to B01 you most probably don't even have it. axon7tool works perfectly if you manage to make it detect the phone.
I guess he unlocked the phone on nougat as I did. So he should have fastboot mode available. So the kit should work. Otherwise you are right. axon7tool.exe is the best way.
Crunchiphone said:
Hello,
I had successfully installed TWRP when I was in B03 on my Axon 7 version G but since I have done an update.
Screenshot History

Currently
Currently

I Can not reinstall twrp-3.1.1-0-ailsa_ii.img
What is the right procedure
Can you help me because I do not know what to do
thank you in advance
Click to expand...
Click to collapse
If you have root you can use the official TWRP app to flash it from Android.
marcus.linkenbach said:
I guess he unlocked the phone on nougat as I did. So he should have fastboot mode available. So the kit should work. Otherwise you are right. axon7tool.exe is the best way.
Click to expand...
Click to collapse
I tried your manual method but after rebooting, the phone just boots to normal system. There is no menu or anything that signals fast boot.
Then when I used the flash cmd you said above, I get "waiting for device" for hours.
I never installed TWRP on this phone or unlocked or rooted it. It's B32 update.
Do you know any other way?
Axon toolkit doesn't even show up. I also downloaded axon7tool-1.5 but it's the same, no show.
What am I doing wrong? I just want to install resurrection remix on my phone.
nelmaxima said:
I tried your manual method but after rebooting, the phone just boots to normal system. There is no menu or anything that signals fast boot.
Then when I used the flash cmd you said above, I get "waiting for device" for hours.
I never installed TWRP on this phone or unlocked or rooted it. It's B32 update.
Do you know any other way?
Axon toolkit doesn't even show up. I also downloaded axon7tool-1.5 but it's the same, no show.
What am I doing wrong? I just want to install resurrection remix on my phone.
Click to expand...
Click to collapse
Get your drivers figured out.
nelmaxima said:
I tried your manual method but after rebooting, the phone just boots to normal system. There is no menu or anything that signals fast boot.
Then when I used the flash cmd you said above, I get "waiting for device" for hours.
I never installed TWRP on this phone or unlocked or rooted it. It's B32 update.
Do you know any other way?
Axon toolkit doesn't even show up. I also downloaded axon7tool-1.5 but it's the same, no show.
What am I doing wrong? I just want to install resurrection remix on my phone.
Click to expand...
Click to collapse
Do this:
turn your phone on and enable adb
open cmd (if you have adb working)
'adb reboot fastboot'
Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you mean this screen ^ that is a normal screen that appears, with every power up / restart, after the bootloader has been unlocked.
I think of it as a "red badge of courage".
As to the question about adb commands, what is it that you are trying to accomplish?
Some more information is needed to help you.
What is your model (h870, us997)?
Are you sure you properly installed twrp (reboot to bootloader, fastboot flash recovery twrp.img)?
Which version of twrp did you use (official, Melina, eliminater's (recommended))?
Regarding your adb problem - do you fail to reboot to recovery using adb from within? Have you tried to turn it off and on again?? I mean, turn it off and try the button combination to enter recovery (turn on holding vol- and power, when logo appears, release power and quickly press again and keep holding both until "factory reset", confirm twice).
Information is key!
PS as the previous poster wrote - if you unlock your bootloader you get the warning screen, just ignore it.
niksjdm said:
Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.
Click to expand...
Click to collapse
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps
Mnky313 said:
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps
Click to expand...
Click to collapse
THANK YOU SO MUCH .. It works .. The problem was in the buttons.
I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..
Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!
niksjdm said:
I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..
Click to expand...
Click to collapse
grushnickij said:
Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!
Click to expand...
Click to collapse
Yes, I use Melina TWRP, flash Version rel_o2 (or latest) using the method I said above.
Where i can find those versions of Twrp ( melina, eliminater ) ?
niksjdm said:
Where i can find those versions of Twrp ( melina, eliminater ) ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-2-1-unofficial-fixes-t3722199
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-lg-g6-us997-unofficial-t3629883
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595