Hello im getting the custom binary blocked by frp lock error
I tried flashing stock firmware with odin and factory reset after that but its not working.
Im pretty new to all this but this is the firmware i installed
samsung-firmware dot org/download/Galaxy__S7__edge__/9vi9/NEE/G935FXXU2ERE8/G935FNEE2ERE8/
SM-G935F
Finland
Thanks
Related
S5 locked please plz plz plz help me.
I have the correct id and password samsung account but when it in the setup wizard it says "singing in" and then immediately "processing failed" shows up
Whats the fix
My story
---------- I rooted s5 using cf auto root then installed xtrestolite 2.2 .but after some days got error in bootup "current binary locked by r/l"
What I did after was flash stock mashmallow firmware "g900fxxuicpd3"(Netherlands) .the device when started with the new firmware required only password and id samsung account. On typing the write one I got signing in (the circle rotates) and immediately processing failed error
flashing kitkat on mashmallow (s5) if r/l enabled
I am on the mashmallow version of firmware
Hey can I directly flash kikat on mashmallow if reactivation lock is enabled. (Knox warranty 0x1)
Yes, Flash stock KitKat ROM log into all accounts, disable reactivation lock
If it won't log in, factory reset from recovery
Has to be stock KitKat
Sorry guys, this is my situation.
i just got a phone from my customer, after flashing an firmware BQL1 with odin, it booted but FRP was on.
I am not sure the phone whether had FRP on before flashing.
So, is it possible? FRP can active by just flashing firmware with odin?
G935F FRP lock out of nowhere, "Device does not have DRK" after stock firmware flash
Hello. I and my friend have a lot of problems currently with the phone.
The phone had randomly thrown the FRP lock on, and it became unbootable. (gets stuck at logo and would tell that "custom binary locked by frp lock"). The phone previously had stock firmware.
The first fix we've attempted was to flash the stock Oreo firmware (G935FXXU2ERE8) via Odin. But after flashing, It got stuck at bootloader logo without any additional text this time.
Then we've tried to flash an older firmware (G935FXXU2DRC4), and then the phone started throwing the "Device does not have DRK" error.
After booting to recovery, it says "Please flash ENG binary then install DRK".
After reboot via recovery, it started throwing a dm-verity error (0x02).
After some Googling I've found out that It's fixable with a boot file flash. But I couldn't find one for current firmware. Maybe we could just use combination sboot file (pakfirmware.com/2017/11/samsung-frp-samsung-s7-edge-g935f-sboot-combination-file), or should I find one that's specific to the current firmware?
My on5 has been rooted for a while with no problems. I downloaded an app to clean it up like an *****. When my phone died and I tried to turn it back on I got to the Samsung logo and in red words, 'custom Binary blocked by FRP'. I can not get into recovery anymore and I tried to flash a stock rom and twrp back to it but odin Says failed and phone says blocked by FRP'. I have done everything I can think of. Including Samsung kies and samfirm. Nothing. Please help.
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
Click to expand...
Click to collapse
You can flash combined firmware for your model, then you will be able to unlock it.
El Solido said:
You can flash combined firmware for your model, then you will be able to unlock it.
Click to expand...
Click to collapse
I tried to do that but i cannot find the suitable oneif i'm not wrong because odin gave me the error md5 invalid. If you could help me it would be great.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
Click to expand...
Click to collapse
I somehow have managed to get back the recovery but it still won't flash the stock firmware. Any idea what to do next anybody?