Moto G4+ display isn't responding after phone bootup. - Moto G4 Plus Questions & Answers

Last night I kept downloading some files on my moto g4+ (XT1643) before going to sleep and it drained the whole battery. When I woke up this morning I connected it to a wall charger and after a few minutes of charging I tried to turn the phone on and it came to life as normal. But when it turned on the touch screen didn't respond and went black after a few seconds. Since then the display isn't responding to the power button though the phone is on as I am able to call my number but the display remains black. While i kept both the power button and the vol- button pressed at a time it boots to the bootloader and if i start the phone again the same thing happens. I also tried to enter into the twrp recovery but it just shows the welcome screen and nothing happens. When the phone is in the bootloader it gets recognized as "fastboot device" in the adb shell.
I don't know what actually the problem is.
please help me.

Related

Screen went blank but the phone turns on once in a while

So I've been using the phone and everything was working fine when all of a sudden it got really slow and then I pulled the battery and since then it won't turn on. I charged the battery completely and then left it out overnight. When I try to turn it on there is a buzz (vibrate) and then nothing. Sometimes the buttons light up. Twice during the day I pressed the power button and it showed up the screen and I was able to check my text message but everything was really slow.
I connected it to the computer and "adb devices" and then it shows up
List of devices attached
HT0*bunchofnumbers recovery
Does this mean the phone is bricked or is there a way to recover it.

Mi A1 won't start after empty battery (Need Help)

So last night I forgot to charge my phone and when I wake up it's died.
I tried to charge it, but the led is blinking and then it booting up to Mi Logo (not androidone logo, before that, where there is "Unlocked" bootloader word) and it just stuck there.
I can't turn it off, nor restart. I don't know is it software faulty or my power button is not working well.
I've tried pressing power button for minutes, + vol down, +vol up&down, nothing work.
Is there is another way to restart/go to fastboot from adb maybe? (because when I tried to connect my phone to PC, the PC detected it), or if you have any other suggestion, thanks before.
Open the phone and disconnect the battery for a minute and try again
Same happened with me still phone is dead
I think you have to open the phone and disconnect the battery

Device not turning on

I recently factory resetted the phone. But the next morning when i woke up, the display was gone. The battery was around the 50% mark. But from that day, the phone is not booting up. I tried blank flash but the phone is recognized as moto g4. No sign of qualcomm or anything. When i press the power button, the led blinks 3 times and then blank again. The phone vibrates with the power button but thats the only sign of life it shows. What shall i do???
Did you find any solution for the problem? I am having the same issue.

[SOLVED] Stuck in boot loop: No image, short vibration every ~5s after battery drain

SOLVED: had display repalced.
Hey there!
I've had this Zenfone 3 Zoom ZE553KL for almost 2,5 years now and this is the first real issue I had with it.
One night I went to bed with ~30% battery remaining. When I woke up the phone was dead and holding the power button only made a short vibration. No image on screen.
Here's the things I tried:
Plugging it in: THe charging LED lights up and the phone vibrates quickly every 5 seconds or so
Leaving the battery to drain for 24h: The phone still starts vibrating when I press (or hold) the power button
Holding PWR and VOL+: The phone starts this vibrating cycle agian
Connecting to a PC via ADB: adb devices shows nothing. fastboot devices shows nothing. The phone had USB debugging enabled.
I did those things with and without the SIM card.
Any ideas how to troubleshoot from here?
Cheers!
SnowRaptor said:
Hey there!
I've had this Zenfone 3 Zoom ZE553KL for almost 2,5 years now and this is the first real issue I had with it.
One night I went to bed with ~30% battery remaining. When I woke up the phone was dead and holding the power button only made a short vibration. No image on screen.
Here's the things I tried:
Plugging it in: THe charging LED lights up and the phone vibrates quickly every 5 seconds or so
Leaving the battery to drain for 24h: The phone still starts vibrating when I press (or hold) the power button
Holding PWR and VOL+: The phone starts this vibrating cycle agian
Connecting to a PC via ADB: adb devices shows nothing. fastboot devices shows nothing. The phone had USB debugging enabled.
I did thoise things with and without the SIM card.
Any ideas how to troubleshoot from here?
Cheers!
Click to expand...
Click to collapse
Not much you can do. Try opening the phone and disconnect the battery for few minutes.
liveroy said:
Not much you can do. Try opening the phone and disconnect the battery for few minutes.
Click to expand...
Click to collapse
Disconnected for 5 min. After reconnecting, same behavior.
Will try leaving for 1h, although I doubt it would make any difference. After 5 min all caps should be discharged...
---
The storage is encrypted. The only way to recover the data is booting the current firmware, right? The last backup is a few weeks old...
SnowRaptor said:
Disconnected for 5 min. After reconnecting, same behavior.
Will try leaving for 1h, although I doubt it would make any difference. After 5 min all caps should be discharged...
---
The storage is encrypted. The only way to recover the data is booting the current firmware, right? The last backup is a few weeks old...
Click to expand...
Click to collapse
Yea, it's encrypted by default. No way to recover it really if you don't boot the device into the os.
Also if the battery disconnection doesn't help, try disconnecting different parts that can be disconnected, like the screen, changing port, cameras etc. One at a time.
As a last resort will be to try to bypass the battery or change it.
I had something similar. I plugged it in and left it for several hours (I think about four or five) and then it turned on.
Mine did NOT vibrate every few seconds though like yours but maybe worth a shot.
Good luck and hope you get it working!
It was the display. Had it replaced and now the phone is working fine.
Thanks, guys!
SnowRaptor said:
SOLVED: had display repalced.
Hey there!
I've had this Zenfone 3 Zoom ZE553KL for almost 2,5 years now and this is the first real issue I had with it.
One night I went to bed with ~30% battery remaining. When I woke up the phone was dead and holding the power button only made a short vibration. No image on screen.
Here's the things I tried:
Plugging it in: THe charging LED lights up and the phone vibrates quickly every 5 seconds or so
Leaving the battery to drain for 24h: The phone still starts vibrating when I press (or hold) the power button
Holding PWR and VOL+: The phone starts this vibrating cycle agian
Connecting to a PC via ADB: adb devices shows nothing. fastboot devices shows nothing. The phone had USB debugging enabled.
I did those things with and without the SIM card.
Any ideas how to troubleshoot from here?
Cheers!
Click to expand...
Click to collapse
I accidentally dropped my ROG 3. The screen had no scratches or any cracks at all, but the screen had no display. It's totally black. I can hear the sound and the vibration when I hold the power button. No charging LED lights. PC could not detect the phone. Thanks for this post. I need to replace the screen, and it's really expensive.

Poco m3 turned off during an update

I am sorry if this is a dumb thread I am just worried. I was watching my Poco M3 update up to 60%(my battery was on 68% before starting the update) then I started to watch TV and didn't pay much attention to the phone. When I looked at it it was off and i thought that maybe it is just in the process of rebooting or its already on the lock screen .Because I thought it may still be rebooting I just placed my finger on the fingerprint reader because I didn't want to risk turning it of by pressing the power button. My phone didn't respond at all. I haven't tried to hold the power button because I'm worried that its still in the process of updating. What should I do ?
Never mind. I had to hold the power button for 10 seconds and it turned on. I am sorry for wasting your time. I was so worried since it was a new phone and I couldn't afford a new one. I am sorry again.
This post was usefull, it happened to me too. The phone wouldn't even show an image when connected to a charger. I waited for a while, entered Fastboot succesfully and then, after the second (on the first one remained stuck on the MIUI screen) 10s power button push, it succesfully booted
It happened also to me during update to 12.0.8.0, but I used Power and Vol+ and then Reboot to System.
It was a moment of anxiety.
It happened to me to. It is a branch new phone and I got so worried that I might just have bricked it. Fk Xaomi.
just happended with me right its on MIUI Screen hope its get on
Update: Just Booted In Fastboot Its on Screen now
Same thing just happened to me too. My phone is not turning on at all. I tried holding the power button for 10 seconds as discussed here, tried fast booting, tried connecting charger and starting. Nothing is working. Going into panic mode.
**UPDATE***
After leaving the phone alone for 24 hours in which time it was completely unresponsive to anything I tried, I connected the charger and just pressed power button and it decided to just start normally. POCO needs to address this situation.
**UPDATE***
Phone is not responding again after restrating. I give up on this phone.

Categories

Resources