P10 black screen bricked!! - Huawei P10 Lite Questions & Answers

I tried to flash a custom rom (MorfuZ) and after installation is complete, the phone reboot and stucked on black screen. I can't get to fastbook or recovery screen. The MultiTool software recognises the device. I tried flashing trough the ''Unbrick'' method and it seems the process is completed, but the phone won't boot. I tried to turn it up but even the screen is not turned on. I have no red or green led as the others threads says (yes I've read a lot of them). The only sign of life is that my PC detects it as "Fastboot2.0" and it's supposed that I flash cust, boot, system and recovery imgs but nothing happens at all. It sounds it's rebooting and the cmd also says that but there is no change. My phone is LATAM version (WAS-LX3). Already bootloader unlocked, installed TWRP and rooted (magisk). My laptop recognises the device the (prompts sounds when connected.)
I tried flashing boot, recovery, system from this .zip file Warsaw-L23_C605B172_Firmware_Panama_Bolivia_Peru_Chile_Colombia_Guatemala_El Salvador_Nicaragua_Honduras_Nonspecific_Android7.0_EMUI5.1_0501 but I couldn't find the CUST file to flash with Multitool software.
This is what I get after flash using MultiTool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plaseas Help !!!

jics91 said:
I tried to flash a custom rom (MorfuZ) and after installation is complete, the phone reboot and stucked on black screen. I can't get to fastbook or recovery screen. The MultiTool software recognises the device. I tried flashing trough the ''Unbrick'' method and it seems the process is completed, but the phone won't boot. I tried to turn it up but even the screen is not turned on. I have no red or green led as the others threads says (yes I've read a lot of them). The only sign of life is that my PC detects it as "Fastboot2.0" and it's supposed that I flash cust, boot, system and recovery imgs but nothing happens at all. It sounds it's rebooting and the cmd also says that but there is no change. My phone is LATAM version (WAS-LX3). Already bootloader unlocked, installed TWRP and rooted (magisk). My laptop recognises the device the (prompts sounds when connected.)
I tried flashing boot, recovery, system from this .zip file Warsaw-L23_C605B172_Firmware_Panama_Bolivia_Peru_Chile_Colombia_Guatemala_El Salvador_Nicaragua_Honduras_Nonspecific_Android7.0_EMUI5.1_0501 but I couldn't find the CUST file to flash with Multitool software.
This is what I get after flash using MultiTool
Plaseas Help !!!
Click to expand...
Click to collapse
If You still have TWRP and if you are on Emui 8 use HWOTA8 method, otherwise if you are on Emui 5 use HWOTA7 to flash your build. As you have already unlocked bootloader the first step in script will be automatically skipped.
Its very easy just follow my video tutorial. Instruction for HWOTA7 is on Serbian but you have instruction on English and some things are logical just view video.
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
Good luck!

Thanksfor the reply. My phone won't boot to recovery nor fastboot mode. I can't turn it on or off, the screen does not display anything, it just sounds when I plug it to the pc. No led light or boot logo

jics91 said:
Thanksfor the reply. My phone won't boot to recovery nor fastboot mode. I can't turn it on or off, the screen does not display anything, it just sounds when I plug it to the pc. No led light or boot logo
Click to expand...
Click to collapse
Yes I understand u must use DC phoenix and test point method after that Hcu client to restore Imei, seriall. Dc phoenix and Hcu client are about 20 usd credit for 3 days. But for test point u must open the cover and on board find test point, conect it, plug usb and run Dc phoenix to restore all partitions. Its not so easy but phone could be fixed.
Poslato sa WAS-LX1 uz pomoć Tapatoka

do u have the location of testpoint of this phone

abcrino50 said:
do u have the location of testpoint of this phone
Click to expand...
Click to collapse
Here it is
Sent from my WAS-LX1 using Tapatalk

it dosent work

p10 lite
Alexxxx1 said:
Here it isView attachment 4533946
Sent from my WAS-LX1 using Tapatalk
Click to expand...
Click to collapse
Alexx da li možeš da uradiš p10 lite bricked u Beogradu da ti nekako dostavim i koliko bi koštalo. Pozdrav >Milan

Related

Cannot restore system, stuck on bootloop

Hey guys,
i recently bought a OP2 from Ebay which is bricked (Stuck on bootloop). The phone wasn't able to boot into Recovery. Only thing worked was Fastboot. I managed to get stock recovery to work using this Guide (Method 3):
https://forums.oneplus.net/threads/updated-28-06-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/
Unfortunately it still stucks in a bootloop. I tryed flashing serveral Stock-ROM's. Does anyone know a solution to fix this?
ADB Sideload give me this output (everytime at around 94%)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm kind of new to this.
Greedings
Kynie
Make sure to update the fastboot/bootloader to the newer 3.0/hydrogenos version as all newer ROMs require this to boot.
How can i do this? I have stock bootloader v. 1.0 installed and not able to flash via fastboot cause the phone is locked. Cannot unlock because i'm not able to turn the phone on.
Then just use the standard Qualcomm flash-mode to restore the phone to factory OxygenOS 3.0.2. The utility and 3.0.2 full OTA zip required can be found in this forum if you search.
Then just use the standard Qualcomm flash-mode to restore the phone to factory OxygenOS 3.0.2. The utility and 3.0.2 full OTA zip required can be found in this forum if you search.
Click to expand...
Click to collapse
Thanks for the information. The OTA zip file do I have already. Sadly I can't find such an utility you are talking about. The only thing I found was a chineese (or I think it's chineese) tool which I already tryed but not worked. This tool just brings the stock recovery v 1.0 to life.
Or do you mean a diffrent tool?
In a similar position to you. Phone was working fine (only received it today and tried to get CM13 on it)
My bootloader is unlocked, but phone will no longer boot up, or go into recovery.
I can get it into FastBoot, but it doesn't show up anymore in ADB devices. When in fastboot, the device shows as "Android Device, Marshall London Bootloader interface"
If I switch the phone off and check Device manager it just shows as unknown device and then windows gives me an error message that its not functioning properly.
I have tried to follow this guide https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
but it won't allow me to update the device driver, even if I turn off signature for drivers.
The only thing I can get to load is Fastboot. I did at one point have a little penguin on the screen, but haven't replicated that again.
Can anyone help? I'm pulling out my hair
Are you sure you didn't just boot it up into fastboot-ish mode? To be able to flash using that tool you mustn't boot up the phone, make sure it's of and hold volume up when connecting the USB cable, this way the phone will enter chinese factory flash mode at which you can flash using the chinese tool. Also the drivers require you to disable driver signature in windows to install since it's not signed.
Got it working in the end. I just ran the application without bothering with the USB driver stuff and it detected the phone. Then flashed the stock rom and it's now booted.
Still can't get CM13 installed, as I get the error 7 in recovery and that's what got me in the mess!
Sent from my ONE A2003 using Tapatalk
I turned driver signature of and installed drivers succesfully. I run the chineese tool and it finishes succesfully but the phone is still in bootloop. This is frustrating...
Hello do you have find à solution ??

P9Lite Brick?

Hi all...
I have P9 Lite. Native firmware was VNS-L31C02B125. I have debranded it to VNS-L31C432B161. All working. Today i try to rebrand my P9 Lite to VNS-L31C02B125. I have rr-inserted c02 (VODAFONE) oeminfo and cutom.bin. I put VNS-L31C02B125 UPDATE.APP in dload dir in sdcard and use 3 button metods. Update start and when arrive to 100% phone rebooted. Now there is black screen only. If i connect phone the pc i can see that it is in fastboot.
fastboot getvar vendorcountry command get me:
vendorcountry: vodafone/ro
dc-phoenix tell me this:
Found Phone : hi6250
Model : Huawei phone in fastboot mode
IMEI : 860**********036
Serial NR. : 4TE***********543
Firmware : VNS-C900B161
I have try to flash system through fast boot with
fastboot flash system C:\Users\***\Desktop\test\SYSTEM.img and other
but phone don't boot.
How i can solve? Please help me.
Your rebranding back to C02 failed...
I think your oeminfo/custom bin was not correct.
If rebranding was ok you must have firmware VNS-C02B161 not VNS-C900B161.
Most likely you flashed wrong oeminfo and custom files.
C900 build number means that.
Do you have access to some recovery (twrp)?
i can't access ti recovery. Now phone is only in fast boot mode... black screen
@gtdaniel please help me...sorry if I bored you
Opensource93 said:
i can't access ti recovery. Now phone is only in fast boot mode... black screen
Click to expand...
Click to collapse
fastboot mode do not have black screen... it have something on screen...
you are realy in fastboot mode?
phone is recognized by PC?
appears as serial number at fastboot command: devices?
if appear, try to flash a recovery from fastboot to see if works...
if not work maybe bootloader is relocked...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I flash twrp but if i press vol + and power reboot in fastboot blackscreen.
After you flash recovery, with key combination can access Recovery or Emui Recovery?
Btw, that is not Fastboot screen... What i put in attach is Fastboot screen...
gtdaniel said:
After you flash recovery, with key combination can access Recovery or Emui Recovery?
Btw, that is not Fastboot screen... What i put in attach is Fastboot screen...
Click to expand...
Click to collapse
I press vol+ and power... reboot but blackscreen. I know phone reboot because phone is recognized by PC
Opensource93 said:
I press vol+ and power... reboot but blackscreen. I know phone reboot because phone is recognized by PC
Click to expand...
Click to collapse
Try this tool: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
or this tool: http://hwmt.ru/hwmtsite/huawei-multi-tool/
Maybe you can revive you phone...
Or buy some credits for DC Phoenix and certain you got you phone back to life...
I decided to give phone in warranty for repair

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
edit: solved
edit: solved
sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)
sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.
sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE

Redmi 4 Pro Only Turn On Fastboot

Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone can help?
1. Downloade and Extract Fastboot Rom
http://en.miui.com/a-234.html
2. Download and Install Mi Flashtool
http://en.miui.com/thread-593524-1-1.html
3. Download EDL from fastboot (credit to emuzychenko xda)
https://forum.xda-developers.com/attachment.php?attachmentid=3775693&d=1465328762
4. Download and install Qualcomm usb driver
http://en.miui.com/forum.php?mod=at...MjIzMjc4MDI4NnwyMzUxMDU=&ck=56381677&mobile=2
>power off your phone.
>vol down + power (fastboot mode)
>double click edl Window Coomend Script (.cmd) file
>now you are on edl mode(check device manager)
>open mi flashtool and select fastboot rom folder
>choose clean all option
>refresh
>flash
Thaw Thaw Npt said:
1. Downloade and Extract Fastboot Rom
http://en.miui.com/a-234.html
2. Download and Install Mi Flashtool
http://en.miui.com/thread-593524-1-1.html
3. Download EDL from fastboot (credit to emuzychenko xda)
https://forum.xda-developers.com/attachment.php?attachmentid=3775693&d=1465328762
4. Download and install Qualcomm usb driver
http://en.miui.com/forum.php?mod=at...MjIzMjc4MDI4NnwyMzUxMDU=&ck=56381677&mobile=2
>power off your phone.
>vol down + power (fastboot mode)
>double click edl Window Coomend Script (.cmd) file
>now you are on edl mode(check device manager)
>open mi flashtool and select fastboot rom folder
>choose clean all option
>refresh
>flash
Click to expand...
Click to collapse
Not working, same errors.
fabioziro23 said:
Not working, same errors.
Click to expand...
Click to collapse
I think the folder you extracted the rom must be in C:\ and have no spaces or symbols, e.g. C:\miuirom and not C:\miui rom or C:\miui_rom.
fabioziro23 said:
Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
Someone can help?
Click to expand...
Click to collapse
Your device is in locked bootloader, you need to unlock your bootloader first before flashing ane image
T3sla said:
I think the folder you extracted the rom must be in C:\ and have no spaces or symbols, e.g. C:\miuirom and not C:\miui rom or C:\miui_rom.
Click to expand...
Click to collapse
Hi, the images are just an exemeple..
Azrul Haifan said:
Your device is in locked bootloader, you need to unlock your bootloader first before flashing ane image
Click to expand...
Click to collapse
Yes its locked, but it was unlocked, instaled twrp and rom whitout any problem, after reboot to forst boot the bootloader was locked again, i don't know why!
I tried lots of solutions that worked to many people, but anything thats online was useless for me, even the solutions with hardware...
Anyway thanks for replying, but i already solved the problem, just needed to unlock whith miflash unlock and it booted with the new rom i had instaled before locked again.
fabioziro23 said:
Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
Someone can help?
Click to expand...
Click to collapse
watch this but i am not responsible for any damage.

My Huawei p10 lite has been crashed and can't boot to anyting- solved

Hi
my P10 lite crash suddenly now loop in this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can't boot to system and recovery, eRecovery only can boot to fastboot mode please help what can i do?
Huawei P10 lite (was-lx1a)
Okay first of all explain what you were doing before the problem occurred and how did this happen?
LesterDMolester said:
Okay first of all explain what you were doing before the problem occurred and how did this happen?
Click to expand...
Click to collapse
I was changing the screen for Phone and after the change I used the device normally and during use it suddenly turned off and then the mentioned problem started,
but sometimes a similar problem occurred. Sometimes if battery dead and restart device , the same problem occurs and its solution is to enter the recovery, now I can’t enter the recovery at all and I tried to reinstall it from fastboot
mohammed h.Gamer said:
I was changing the screen for Phone and after the change I used the device normally and during use it suddenly turned off and then the mentioned problem started,
but sometimes a similar problem occurred. Sometimes if battery dead and restart device , the same problem occurs and its solution is to enter the recovery, now I can’t enter the recovery at all and I tried to reinstall it from fastboot
Click to expand...
Click to collapse
does eRecovery work at all?
Can you try downloading the firmware on to your pc than flashing it using dload method?
LesterDMolester said:
does eRecovery work at all?
Can you try downloading the firmware on to your pc than flashing it using dload method?
Click to expand...
Click to collapse
Can,t enter to erecovery
and yes I,m try reinstall I, m use custom rom and nothing
flash twrp put the dload folder with firmware inside internal storage and flash nocheck recovery and install the firmware using dload method
LesterDMolester said:
flash twrp put the dload folder with firmware inside internal storage and flash nocheck recovery and install the firmware using dload method
Click to expand...
Click to collapse
Try flash twrp but can't enter
I will explain the problem to you again to clarify
I try flash twrp More than once Every time I try to enter recovery, it reboots over and over again
And try enter erecovery to restore but it refuses to enter and restarts again and again until the battery dead when charging, it does not enter charging mode, only restarts
LesterDMolester said:
flash twrp put the dload folder with firmware inside internal storage and flash nocheck recovery and install the firmware using dload method
Click to expand...
Click to collapse
I've been busy lately and I didn't know the way, could you explain it to me step by step?
I couldn't believe what was the cause of the problem. It was a very, very silly problem, The reason is due to the type of screen that was installed recently And it was showing what was in it fastboot this code:
AP_S_PMU 144
ocp_ldo17 ocp_ldo31
This problem has been resolved by returning the old screen And it works normally
I do not believe this
I am very, very sorry for the inconvenience, and thank you for the help. I am grateful
This problem came while I was changing screen. after I finished from installing the screen I test it and everything it's ok after that suddenly it stop working and bootloop and can't boot and flash anything except fastboot
and shows in the fastboot this code:
AP_S_PMU 144
ocp_ldo17 ocp_ldo31
I search for this and clearly because of the new screen
Solve the problem reinstall the old screen and boot normally

Categories

Resources