Related
Its been inspired by Sudeep Duhoon Thread , Thank him if possible . Except the rooting part everything is preety much same as Sudeep Duhoon did.
I just found out you could 7.2.3 much easily Root the device rather than editing scripts and all of the stuff which i didn't get from his thread.[No offense sir]
Downloads :
1. Minimal Adb Tool
2. MiFlash_2016.03.30.exe
3. Fastboot 7.2.3 Rom
4. Unlocked EMMC or check the attachment.
5. 7.2.3 PATCHED BOOT IMAGE
Unlocking Bootloader :
1 . Connect your Phone to Computer in USB DEBUG and OEM UNLOCK mode to the computer. [Both of these settings are turned on from developer option.]
2. In ADB check if your device is successfully connected using "adb devices" command .
3. NOW , Reboot the phone into EDL mode using this command "adb reboot edl" .
4. Now make sure you're device is connected in "Qualccomm HS-USB QLoader 9008" , if yes continue .
If the device is connected in "Qualcomm HS-USB Diagnostics 900E" Start it from step 1 again.
5. DOWNLOAD 7.2.3 fastboot Rom . Extract the rom.
Download, Extract unlocked_emmc_appsboot.mbn. Rename it to "emmc_appsboot.mbn" And move it inside the extracted ROM FOLDER.
6. Now Start the MI Flash Tool and Browse to the Location Where you have Extracted the Fastboot ROM
7. Go to Advanced and Select:
Flash Programmer, Raw XML File and Patch XML File
from the Fastboot ROM\Images folder.
8. Close the window and click on refresh , Your device with certain COM# will appear. Just click on Flash.
Wait until its successful .
9. Once it is successful , Hard Boot your phone to fastboot using POWER DOWN + POWER ON buttons on your phone.
10. Now in command prompt type "fastboot oem device-info" , you'll see the DEVICE UNLOCKED : FALSE
11. Now Enter the following command "fastboot oem unlock-go" . Your device must be unlocked , to confirm enter the previous[step 9] command again.
YOUR BOOTLOADER IS UNLOCKED NOW
FLASHING TWRP :
1. Move the twrp image in minimal adb folder. Rename the twrp image to twrp.img
2. Enter the command "fastboot flash recovery twrp.img"
TWRP HAS BEEN SUCCESSFULLY Installed.
P.S : To boot into twrp : volume up + power on . But it might take 2-3 tries to boot into TWRP . [ I don't yet know why this happens .]
ROOTING :
1. Move SUPER SU and PATCHED BOOT IMAGE into your mobile.
2. Install Super Su.
3. Install Boot Image, Dont forget to select install image and boot partition while installing.
4. You've SUCCESFULLY ROOTED your device .
P.S : PLEASE TRY IT AT YOUR OWN RISK.
Emmc rar does not get extracted... I think the archive is corrupt... Please check onto that
Sent from my Redmi Note 3 using Tapatalk
kirkirehani93 said:
Emmc rar does not get extracted... I think the archive is corrupt... Please check onto that
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
rar file is just fine , anyway i have uploaded a zip file in the attachment . please check.
reply fast
if i m right... i have to put supersu and boot.img to phone fefore flashing twrp. bcoz after flashing twrp if i reboot to system, phone will not boot and may be bricked...plzzz reply
vivekjha said:
if i m right... i have to put supersu and boot.img to phone fefore flashing twrp. bcoz after flashing twrp if i reboot to system, phone will not boot and may be bricked...plzzz reply
Click to expand...
Click to collapse
No no. It doesn't matter when you put it in. And your after flashing twrp you can directly boot into TWRP and then move the files into mobile.
P.S : While in recovery , you can always copy files in to your mobile.
What if bootloader unlocked officially? Start from "Flashing TWRP" section?
any 1 tried this
any one tried this succesfully plzzz reply
Error during flashing with MiFlash
Got this error during Flashing process:
Status: Not enough storage space is available to process this command.(0x80070008; Max buffer sector is 256)
What should I do? My device does not boot...
anirudh281998 said:
Got this error during Flashing process:
Status: Not enough storage space is available to process this command.(0x80070008; Max buffer sector is 256)
What should I do? My device does not boot...
Click to expand...
Click to collapse
Use Windows 64bit edition.
The flashing process will fail in Windows 32bit edition
will this work in RN3 MTK ???
Will this work on 7.2.5 ?
RedBux said:
will this work in RN3 MTK ???
Click to expand...
Click to collapse
No
Thri11 said:
Use Windows 64bit edition.
The flashing process will fail in Windows 32bit edition
Click to expand...
Click to collapse
Thank you.....i tried it on windows 64 bit and it worked.
I tried unlocking bootload. I got this error "The system cannot find the path specified. (0x80070003: Open Programmer c:...)"
What have I done wrong?
Edit: I deleted the file. Extract it again. Then I unlocked bootloader successfully.
will this void warrenty ?
and to flash miui china roms we need to edit the fastboot everytime ?
When I flash supersu my device won;t boot. Boots fine before though
Hi, I'm on MIUI 7.5.3, can I use 7.2.3 ROM as provided to unlock bootloader or I have to find a 7.5.3 one?
GitGudWolf said:
Hi, I'm on MIUI 7.5.3, can I use 7.2.3 ROM as provided to unlock bootloader or I have to find a 7.5.3 one?
Click to expand...
Click to collapse
I too would like to know the same.
Would this work on 7.5.3 or will I need to do something else
not working sir....
when perform fastboot oem unlock-go, result:
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.000s
UPDATE
SOLVED : "Enable OEM unlock" must be turn on in dev option.
This is all new latest TWRP 3.0.2.0 created officially by me, and thanks to Navid Ansari bro who always supported me
* Download and install adb and fastboot drivers on ur pc,
* Download TWRP
https://drive.google.com/file/d/0BzypOfz8caFBUmV0dmtob1ZrZDA/view?usp=docslist_api
* Extract the zip and place the fastboot folder on desktop,
* Enable Usb debugging and oem unlock of ur phone,
* Open the fastboot folder, press shift+right click button and open new window command here,
* Remove batteries, insert again, hold volume - button and connect usb phone to pc (device will be connected to fastboot mode)
* Type commands without (#)
#fastboot devices
*now u will see ur devices connected, if not then try to reinstall adb fastboot drivers & continue the steps again
#fastboot oem unlock
*ur bootloader will be unlocked
#fastboot format userdata
*ur device will be reset to factory mode, now remove data cable, power on the device & once again enable usb debugging and oem unlock, now again connect device to fastboot mode (well, i already mentioned u how to connect fastboot mode, right!!)
#fastboot devices
*to check if device connected or not
#fastboot flash recovery twrp.img
*twrp will flashed to ur device successfully
*Remove data cable, power on ur device holding +volume up bottons for few seconds, whoillllaaa!! ur device is now rebooting on latest twrp mode.
*dont tick on anything just swipe to allow modifications, now u can backup everything u want,
*reboot system, it will ask u to root install supersu, just allow it, now ur device will be rooted officially by twrp and supersu app will get automatically installed.
*Pleae hit Thanks and support me for more tweaks and tricks, and if u found any problems do comment below,
*hope to see u again
*Enjoy
Xposed for Phicomm E653, flash with twrp
https://drive.google.com/file/d/0BzypOfz8caFBOXVXdmEwQ3Y5YlU/view?usp=docslist_api
Xposed framework apk,
Install as normal apk
https://drive.google.com/file/d/0BzypOfz8caFBYjNyUjN1NjZsNHc/view?usp=docslist_api
Thank you navid ansari. You are perfect. تشکر فراوان دوست عزیز
Sent from my GT-I8552 using Tapatalk
can i flash it via rasher app
rooted phicomm e653 4g
not working tested
unable to boot into fastboot mode
start vibrating in step volume down
and boot will android is booting
thanks man i have my own twrp and cm14 rom
phicomm e653 INdia 4g bands help
Hey Sameer thanks for the twrp man.
I have installed EU firmware of phicomm E653, but Now I am facing a problem related to network i.e. it does not support indian 4g bands- Band 5 (850) and band 40 (2300MHZ) it only supports 1800mhz band. I need band 40. I have changed NV RAM values using qpst and qxdm still no luck.
Is there anyway to unlock band 40 ?(I know changing NVRAM values but some other software change is also needed i guess )
If you have the original firmware of indian version can u please provide me the same ?
U can take the twrp backup and share that with me.. thanks!
Still available?
Your twrp link is down. Do u still have this file?
hello,
first of all i recommend the advanced users to try this method first to see if they succeeds or not if they then, cheers for the new unofficial bootloader unlocking method. here i will provide steps to do:-
Things you need:
- fastboot rom MiUi 8 8.2 will work
-the modified bootloader file
-helpful quick answers
ok so here we begin
PREREQUISITE
-adb and fastboot setup already on your pc
-usb debugging and oem unlocking must be enabled(from developer options)
-mi flash tool ~>Get older version from here (use 20160401)
-driver signature off
step 1
Enable USB debugging and connect device to pc,
now open fastboot and adb folder and there open cmd and type
Code:
adb devices
step 2
you can recognize the device connected to pc
now reboot device to edl mode
Code:
boot to edl by button combination or fastboot command
you can see your phone is in edl(emergancy download mode)
step 3
extract the fastboot file, and goto extracted_folder/images
there you can find a file named emmc_appsboot.mbn
replace with the downloaded emmc file(from begining of post)
step 4
open mi flash tool and connect phone via usb and click on refresh you can seee a COM port with a number on display,
now browse and load the fastboot rom.
step 5
(in this step i'll be specific as same as redmi note 3 bootloader unlocking method is)
click on advanced and there
and choose these
Browse to flash_all.bat in Fastboot rom folder at First option ,
Third option to prog_emmc_firehose_8976_ddr.mbn ,
then last two options browse to rawprogram0.xml and patch0.xml
step 6
after selecting files in advanced ,go back and click on refresh
step 7
now flash the fastboot file as soon flashing completes remove cable and keep holding fastoot combination keys
now you are booted into fastboot
step 8
the fun part(i guess)
goto adb and fastboot folder and open cmd there'
and type
Code:
fastboot devices
to check if device detected or not
now type
Code:
fastboot oem unlock-go
now it should show
Code:
...
OKAY FINISHED
like this
step 9
now if you succeeded step 8 completely
i'd suggest you to check if bootloader is unlocked or not
type
Code:
fastboot oem device-info
if that shows as
Code:
<bootloader> Device Unlocked:true
then Congratulations.. you successfully unlocked bootloader without permission from xiaomi
now for the people who are trying do please inform if this method worked or not
(will be helpful to me for re edit post with ease steps)
credits to my whatsapp friend who given me required files lol :highfive:
AGAIN please do reply, if this method works or not if worked then cheers :victory:
This is the second time I see this Note 3 unlocking stuff posted here...
Since when adb reboot edl works for MI Max? I'll tell you... since never...
Have you tried this procedure yourself? I bet you haven't...
So don't post something so risky without confirming it working personally, please...
I will strongly advice everyone even considering this!!!
nijel8 said:
This is the second time I see this Note 3 unlocking stuff posted here...
Since when adb reboot edl works for MI Max? I'll tell you... since never...
Have you tried this procedure yourself? I bet you haven't...
So don't post something so risky without confirming it working personally, please...
I will strongly advice everyone even considering this!!!
Click to expand...
Click to collapse
Actually.. i curruntly dont have my mi max now.. i saw on a post they told about edl mode.. and i asked other members from xda whatsapp group many of them told me max has edl mode.. and they said they tried it...
Swapnil Soni said:
Actually.. i curruntly dont have my mi max now.. i saw on a post they told about edl mode.. and i asked other members from xda whatsapp group many of them told me max has edl mode.. and they said they tried it...
Click to expand...
Click to collapse
Mi Max has Edl Mode but it cannot be booted by adb reboot edl, edl in mi max can only be booted by combination of buttons.
paarkhi said:
Mi Max has Edl Mode but it cannot be booted by adb reboot edl, edl in mi max can only be booted by combination of buttons.
Click to expand...
Click to collapse
Oh okey, i edit the post
EDL can be booted from fastboot by typing fastboot oem edl on the Mi Max
TheLolageMann said:
EDL can be booted from fastboot by typing fastboot oem edl on the Mi Max
Click to expand...
Click to collapse
Yes i edited in the post
Btw, i wanted to ask has anyone tested this method yet, ?
The method is much too dangerous to test, the modified bootloader file depends on android version and may brick your phone - read more in RN3 thread.
You should not have even posted such a method without personally testing it - we, as in users, are not guinea pigs.
step 5
(in this step i'll be specific as same as redmi note 3 bootloader unlocking method is)
click on advanced and there
and choose these
Browse to flash_all.bat in Fastboot rom folder at First option ,
Third option to prog_emmc_firehose_8976_ddr.mbn ,
then last two options browse to rawprogram0.xml and patch0.xml
Click to expand...
Click to collapse
Xiaomi MiFlash has no "Advanced" button, you are not even linking to the program you are advising to use.
Please remove this post and either do the procedure yourself first or do not post such pos here as nobody could even complete the procedure.
mat9v said:
The method is much too dangerous to test, the modified bootloader file depends on android version and may brick your phone - read more in RN3 thread.
You should not have even posted such a method without personally testing it - we, as in users, are not guinea pigs.
Xiaomi MiFlash has no "Advanced" button, you are not even linking to the program you are advising to use.
Please remove this post and either do the procedure yourself first or do not post such pos here as nobody could even complete the procedure.
Click to expand...
Click to collapse
Actually Mi flash tool has the option for advanced .. if you had the older version .. till now i havent updated to latest version yet, also if you may read above post i told that i currently dont have my max now, and i aint gonna get it in next 1 or 2 years, my brother took it and now he is at his hostel...
I ll link the old miflash tool, and the dangereous thing is only one soft brick(stuck at logo) and bootloop, I have experienced some that bootloaders doesnt vary device by device...
So probability is to get a stuck on logo or get a bootloop its simple that you just load the original fastboot firmware and flash, that reverts back to normal state, for now,
I'm just trying to help, if people dont like it then I will defineatly leave.
Swapnil Soni said:
Actually Mi flash tool has the option for advanced .. if you had the older version .. till now i havent updated to latest version yet, also if you may read above post i told that i currently dont have my max now, and i aint gonna get it in next 1 or 2 years, my brother took it and now he is at his hostel...
I ll link the old miflash tool, and the dangereous thing is only one soft brick(stuck at logo) and bootloop, I have experienced some that bootloaders doesnt vary device by device...
So probability is to get a stuck on logo or get a bootloop its simple that you just load the original fastboot firmware and flash, that reverts back to normal state, for now,
I'm just trying to help, if people dont like it then I will defineatly leave.
Click to expand...
Click to collapse
Yes! We appreciate you trying to help but your missing the point... You have uploaded a guide from another handset expecting it to work for our devices having not tested it previously, the guide isn't even for out device so have fun being guinea pigs
kyler084 said:
Yes! We appreciate you trying to help but your missing the point... You have uploaded a guide from another handset expecting it to work for our devices having not tested it previously, the guide isn't even for out device so have fun being guinea pigs
Click to expand...
Click to collapse
I didnt took all things from rn3 bl unlocking page, i just took method of flashing. And the bootloader file thats taken from officially unlocked bootloade, and i just told if previous post i dont hav max right now, so i wish if someone tried this and if he succeeds.. then its very good news for all locked bl users..
But i think none is not even trying
Definititely some procedures must be changed and adapted to mi max. Experimented developers has portion of truth but some users can`t get answer to unlock devices and me personally if my bootloader was locked don`t want have a device wich can`t be real owner.
Opennig file emmc... remember that an old trick from kitkat to unlock with sucess my old xperia z. some looks be based on the principle to replace original values in the clusters just for zeros. I uploaded two orginal and unlocker emmc files to consider this but of course I can`t confirm cause my bootloader is unlocked.
Some ideas aloud.
There are differences between locked and the official unlocked bootloader (please, see in the hex-editor the end of both files). It's a right idea for replace the locked bootloader (emmc_aboot) to official unlocked emmc_appsboot. The official unlocked emmc_appsboot we can get by dump of the partition in official unlocked device and this binary file will be have the .img extension (uncompressed binary file).
For checking we should check two binary files in the hex-editor: emmc_appsboot.mbn from ROM for fastboot flash and modified bootloader file from author. But files with .mbn extension should be uncompressed.
Sorry, but I don't know as uncompress the .mbn file.
SubwayChamp said:
Definititely some procedures must be changed and adapted to mi max. Experimented developers has portion of truth but some users can`t get answer to unlock devices and me personally if my bootloader was locked don`t want have a device wich can`t be real owner.
Opennig file emmc... remember that an old trick from kitkat to unlock with sucess my old xperia z. some looks be based on the principle to replace original values in the clusters just for zeros. I uploaded two orginal and unlocker emmc files to consider this but of course I can`t confirm cause my bootloader is unlocked.
Click to expand...
Click to collapse
Yeah i checked in hex, i guess its the some kinda lock codes with it so they got removed(i m noob in hex ' )
As far as .. result will be known by practically
Maybe developers can make something similar to safestrap, it was a great project based on bootstrap (now abandoned) that works with a modified recovery that allows install almost any rom on bootloader unlocked (and unlockable cause company never want to unlock it at least till the time I used) on my old galaxy note 3 at&t. This app created a second slot and more directly to install roms.
[U][B]Please, Somone who can revive their device from bootloop[/B][/U]
I thought someone will try it
This is far too risky to try
Sent from my Xiaomi MI MAX using XDA Labs
fail
already try this tutorial and ended my device brick no fastboot mode,cant turn on..solution im using testpoint to get my device unbrick...
Swapnil Soni said:
hello,
first of all i recommend the advanced users to try this method first to see if they succeeds or not if they then, cheers for the new unofficial bootloader unlocking method. here i will provide steps to do:-
Things you need:
- fastboot rom MiUi 8 8.2 will work
-the modified bootloader file
-helpful quick answers
ok so here we begin
PREREQUISITE
-adb and fastboot setup already on your pc
-usb debugging and oem unlocking must be enabled(from developer options)
-mi flash tool ~>Get older version from here (use 20160401)
-driver signature off
step 1
Enable USB debugging and connect device to pc,
now open fastboot and adb folder and there open cmd and type
Code:
adb devices
step 2
you can recognize the device connected to pc
now reboot device to edl mode
Code:
boot to edl by button combination or fastboot command
you can see your phone is in edl(emergancy download mode)
step 3
extract the fastboot file, and goto extracted_folder/images
there you can find a file named emmc_appsboot.mbn
replace with the downloaded emmc file(from begining of post)
step 4
open mi flash tool and connect phone via usb and click on refresh you can seee a COM port with a number on display,
now browse and load the fastboot rom.
step 5
(in this step i'll be specific as same as redmi note 3 bootloader unlocking method is)
click on advanced and there
and choose these
Browse to flash_all.bat in Fastboot rom folder at First option ,
Third option to prog_emmc_firehose_8976_ddr.mbn ,
then last two options browse to rawprogram0.xml and patch0.xml
step 6
after selecting files in advanced ,go back and click on refresh
step 7
now flash the fastboot file as soon flashing completes remove cable and keep holding fastoot combination keys
now you are booted into fastboot
step 8
the fun part(i guess)
goto adb and fastboot folder and open cmd there'
and type
Code:
fastboot devices
to check if device detected or not
now type
Code:
fastboot oem unlock-go
now it should show
Code:
...
OKAY FINISHED
like this
step 9
now if you succeeded step 8 completely
i'd suggest you to check if bootloader is unlocked or not
type
Code:
fastboot oem device-info
if that shows as
Code:
<bootloader> Device Unlocked:true
then Congratulations.. you successfully unlocked bootloader without permission from xiaomi
now for the people who are trying do please inform if this method worked or not
(will be helpful to me for re edit post with ease steps)
credits to my whatsapp friend who given me required files lol :highfive:
AGAIN please do reply, if this method works or not if worked then cheers :victory:
Click to expand...
Click to collapse
please post steps with pictures or link a youtube video, I'll sub you, and I'm sure others will too.
hi
i use a j5 Prime sm-G570Y on andriod Oreo
i can't find the proper root files to flash using Odin as most of them are either not for andriod Oreo or for the g570F, not Y
i've tried using Odin to root my phone before, but all that happend was that my phone got bricked so i'm not really willing to try and root again unless i know that the root file is specifically for my exact phone model and Android version
if someone has any info on root files for my phone it would be of gr8 help
oso im new here and i dk technical terms sozz
Do you have twrp?
If yes just flash magisk.
garylawwd said:
Do you have twrp?
If yes just flash magisk.
Click to expand...
Click to collapse
i dont have it installed
i tried to install it but i get stuck on <waiting for devices>
plus i've also updated drivers for my phone (j5 prime)
im really really confused right now, help would be apprectiated
leguy said:
i dont have it installed
i tried to install it but i get stuck on <waiting for devices>
plus i've also updated drivers for my phone (j5 prime)
im really really confused right now, help would be apprectiated
Click to expand...
Click to collapse
You got stuck on waiting for devices because you didnt enable OEM unlocking and USB debugging from developer options in settings.
You need to go to settings - about device - click on the build number 7 times and you unlock developer options.
garylawwd said:
You got stuck on waiting for devices because you didnt enable OEM unlocking and USB debugging from developer options in settings.
You need to go to settings - about device - click on the build number 7 times and you unlock developer options.
Click to expand...
Click to collapse
I enabled Usb debugging and OEM unlock before i tried it
so what i did was open up cmd,
type cd <place where SDK files are>
type adb devices
type adb reboot bootloader
at this point the phone enters download mode
then i type fastboot flash recovery twrp.img (i renamed the twrp file for my phone to twrp)
then the waiting for device thing appears
i tried rebooting and using fastboot oem unlock instead, but it still said waiting for device
Check if CFAutoRoot is available for your device... If not available you can create from there
Hi All,
My ZenFone Max Pro M1 is bricked and cannot be started apart from recovery mode. I used QFIL tool to install the recovery image from the following link:
https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/unbrick-unbrick-hardbricked-max-pro-m1-t3829754
I am able to boot the phone with an image (Oreo 8.1.0) that cannot be used for general use. It seems like very vanilla image with some debugging tools.
I tried enabling the USB Debugging option to flash it with stock ROM. However, I was not able to find OEM unlock option in developer mode. I tried Asus official Boot Loader unlock tool but the same give an error "This device is not supported".
After flashing with the above ROM, my IMEI and Serial numbers are all 0.
If I try to enable the ADB recovery using Sideload, the PC doesn't detect the phone. I am sure all drivers are installed properly as the phone is properly detected in Fastboot. I can also see the phone listed in ADB mode after the UI is loaded in phone.
I also tried installing firmware using external memory but the phone says the external memory cannot be mounted.
Is there any way I can restore the stock firmware on my phone?
Thank you all in advance!
Regards,
Ashish Sharma