Need help: Huawei nova 2i - Huawei Nova 2i (Mate 10 Lite / Honor 9i) Questions

Need help! I need to flash stock recovery of my huawei nova 2i.
recovery.img
recovery2.img
boot.img
Anyone who can help me download this file:: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v125098/f1/full/update.zip :::
and extract the following files above in " update.app " via huawei update extractor?
And upload it so i can download the extracted files.
recovery.img
recovery2.img
boot.img
Pls. Help me guys! I don't have any connection aside from data i dont want to download the whole file just to get this 3 files whos only size not more than 100mb.
Thank you in advance!

Related

Rooting XT320/XT321 CWM Version.

Hello guys ! Today i successfully extracted the boot.img and recovery.img of motorola xt320/xt321. Can someone help me to create a cwm recovery?
here is the extracted boot.img and recovery.img www. mediafire. com/?w5bvzsahgrz563d
Can someone help me ? To create a cwm recovery? . I already go to builder.clockworkmod .com/
but it give me a 3 files android_device_motorola_TinBoost, inputrecovery.img and recovery.img here's the link [email protected]/job/recovery/13999/ Just remove the "@" and replace with Dot What to do? Fastboot cannot detect my phone.
why no one replys to my thread? ((( :crying:
What tools you're using to extract the boot.img and recovery.img ?
In the firmware it renamed to recoverysec and bootsec.mbn just change the mbn extension to img
Sent from my XT321 using xda app-developers app

huawei p8lite

please I'm trying to update my Huawei P8lite but get Update Failed
I tried to extract update.app to use it with ADB but when I extract the update it doesn't become just Recovery.IMG Cust.IMG. System.IMG ect... when I extract the updates I find a lot of files so I can't use them to install a ROM on my device
please any help

p8 lite l21-c185b525 downgrade

my old build l21-c185b160
i upgrade l21-c185b525
now i want to downgrade l21-c185b160
how to do this. please help me.
You must have your c185b160 update.app file, you'll also need Huawei Update Extractor download link : http://forum.xda-developers.com/attachment.php?attachmentid=3262544
And minimal fastboot, link:http://forum.xda-developers.com/showthread.php?t=2317790
Now unzip the downloades extractor zip file amd install it.. Open the extractor and browse update.app (b160 update.app). After browsing, you will see many files; image files (system.img, boot.img,etc) amd other files (meta-inf, etc).. Among them you'll need only 4 image file; system, boot, recovery and cust..
Unzip minimal adb and fastboot and install it.. Now open it with administrator privilege and flash in this order:
Fastboot flash boot boot. img,
Fastboot flash recovery recovery.img, Fastboot flash cust cust.img,
Fastboot flash system system.img..
If flashing is done, you're on b160
Sent from my ALE-L21 using XDA-Developers mobile app
'i have'nt ale-l21c185b160 update file
'
can you give the ale-l21c185b160 update file link?
wajeehusarfan said:
'i have'nt ale-l21c185b160 update file
'
can you give the ale-l21c185b160 update file link?
Click to expand...
Click to collapse
ok i didn't find it too.. but i found the one for c185b120...
here is the link: http://www.carbontesla.com/2015/06/huawei-p8-lite-l21-b120-emui-3-1-stock-lollipop-firmware-pk/
you can upgrade via OTA from there...

[GUIDE] Extract+fastboot IMG file for newbie

Hi all,
I would like to show how to extract IMG files from Update.app + fastboot IMG files for newbie. I think ,it's help them to play Mate 8
[GUIDE] How to EXTRACT IMG files from UPDATE.APP Huawei Stock firmware
[GUIDE] How to fastboot IMG (BOOT,RECOVERY,SYSTEM) file from UPDATE.APP (HUAWEI)
good work there buddy, im sure this will help along the noobs as long as they actually READ the threads / use the search function, that is...
Sent from my Huawei Mate 8 NXT-AL10

Question - How can I reinstall system on Huawei Nova CAN-L11?

Hello,
I would want to make a full system reinstall on my Huawei Nova CAN-L11. Full wipe and clear system install. I have one big reason: when I turn on mobile data, I have 50% chance to get internet connection. Otherwise I have to go change from 3G/2G to LTE/3G/2G or vice versa. Also when I haven't got internet, I can't send MMS. I want to try myself with reinstalling against giving Huawei Service because I don't have time to drive to nearest city with Huawei Service.
I wasn't playing with android reinstalling via fastboot and adb for a while, about 3 years so I have questions.
Can I do this on locked bootloader?
What files I have to have? I wasn't installing system on any Huawei. On Sony it was simple - download .tft, get flashtool and begin, but I have no idea what I have to do on Huawei.
I haven't found any guide for Huawei Nova but found guide for Huawei Ascend P7.
Now I will type steps that I think I should to do. Tell me if they are good or no and what to change.
Code:
Download ROM and extract update.app.
Extract boot.img, recovery.img, cust.img, cache.img, userdata.img and system.img from update.app via Huawei Extractor.
Go to download mode
Flash recovery.img
Go to recovery
Wipe all
Go to download mode
Flash in order boot.img, cust.img, cache.img, userdata.img and system.img.
Are these steps good?
VaZZoN said:
Hello,
I would want to make a full system reinstall on my Huawei Nova CAN-L11. Full wipe and clear system install. I have one big reason: when I turn on mobile data, I have 50% chance to get internet connection. Otherwise I have to go change from 3G/2G to LTE/3G/2G or vice versa. Also when I haven't got internet, I can't send MMS. I want to try myself with reinstalling against giving Huawei Service because I don't have time to drive to nearest city with Huawei Service.
I wasn't playing with android reinstalling via fastboot and adb for a while, about 3 years so I have questions.
Can I do this on locked bootloader?
What files I have to have? I wasn't installing system on any Huawei. On Sony it was simple - download .tft, get flashtool and begin, but I have no idea what I have to do on Huawei.
I haven't found any guide for Huawei Nova but found guide for Huawei Ascend P7.
Now I will type steps that I think I should to do. Tell me if they are good or no and what to change.
Code:
Download ROM and extract update.app.
Extract boot.img, recovery.img, cust.img, cache.img, userdata.img and system.img from update.app via Huawei Extractor.
Go to download mode
Flash recovery.img
Go to recovery
Wipe all
Go to download mode
Flash in order boot.img, cust.img, cache.img, userdata.img and system.img.
Are these steps good?
Click to expand...
Click to collapse
Hello!
I'm sorry for the late reply. Check this post.
VaZZoN said:
Hello,
I would want to make a full system reinstall on my Huawei Nova CAN-L11. Full wipe and clear system install. I have one big reason: when I turn on mobile data, I have 50% chance to get internet connection. Otherwise I have to go change from 3G/2G to LTE/3G/2G or vice versa. Also when I haven't got internet, I can't send MMS. I want to try myself with reinstalling against giving Huawei Service because I don't have time to drive to nearest city with Huawei Service.
I wasn't playing with android reinstalling via fastboot and adb for a while, about 3 years so I have questions.
Can I do this on locked bootloader?
What files I have to have? I wasn't installing system on any Huawei. On Sony it was simple - download .tft, get flashtool and begin, but I have no idea what I have to do on Huawei.
I haven't found any guide for Huawei Nova but found guide for Huawei Ascend P7.
Now I will type steps that I think I should to do. Tell me if they are good or no and what to change.
Code:
Download ROM and extract update.app.
Extract boot.img, recovery.img, cust.img, cache.img, userdata.img and system.img from update.app via Huawei Extractor.
Go to download mode
Flash recovery.img
Go to recovery
Wipe all
Go to download mode
Flash in order boot.img, cust.img, cache.img, userdata.img and system.img.
Are these steps good?
Click to expand...
Click to collapse
Yes these Steps Are good. Just used these for myself to Reinstall system via Fastboot. But my Bootloader was Unlocked, if it doesnt work, unlock bootloader first.
But use the latest Firmware for CAN11.
And if you run accross any cust.img File for your CAN11 please let me know. ^^

Categories

Resources