hi guys
i have problem with my mate8 nxt-l29
in fastboot i want to relock my phone , but i get error : (remote: root type is risk).
phone unlocked
FRP unlocked
and my phone cant boot into android or recovery or custom recovery or dload mode or power + power - power mod ...
please help me
Maybe explain more what firmware do you have and why it's not booting?
phone cant boot , so i cant remember what firmware was on the phone
also try manually flash with fastboot ROM nxt-l29c185b103 , 130 , 180 , 190 ... ( recovery boot cust catche system )
but no boot , no recovery ....
Just i can enter the fastboot with :
Phone Unlocked
FRP Unlock
What did you flash so the phone stopped booting? Maybe try knife tool to unbrick ur phone.
U can try DC Phoenix
need to:
flash stock recovery
flash stock official firmware (dload)
wipedata/factory reset
reLock your bootloader
Inviato dal mio NXT-L29 utilizzando Tapatalk
PROBLEM SOLVED
my rom stocked on C432 and mine is C185 , so flash manually [cust,catche,system,boot,recovery]
after that entered recovery [stock] wipe and factory and reset , after that phone get LOCKED and everything get ok
THANK YOU ALL.
Hi!
Got a problem, need to send my p9 lite to service bc it fell with me into water. it still works, but I assume a chip is frozen because neither the wifi nor bluetooth can be turned on. I'm afraid theyre not fixing my problem because I unlocked it.
I flashed twrp recovery, rooted, but already flashed the stock rom and unroot again.
When I tried to relock with adb and bootloader code, I got the error code root risk is too high
Tried to install other stock roms again and a lot of stuff, but none of it worked. So I tried to relock via dc-unlocker. com but didnt work. But now it says when I restart "your device has failed verification and may not work properly." instead of "Your device has been unlocked and can't be trusted." and when I tried to use adb to relock with the bootloader code it says "remote: stat not match" ~ got a new bootloader code??
I'm desperate, can anyone help me?
put update.app into dload folder in micro sd card and try 3 button method.
hey i have just the same problem and when i try the 3 button method i get the error software install failed.
but i have no revolution twrp any more and i think also no erecovery beacuse i cant do a factory reset when i tried to enter erecovery with power button , volume + button then i go automatic to software update and at the 5% i get the error software install failed i hope some body get a solution to fix my phone without dc-unlocker
ps i was on android nougat but i think there any os now because the phone dont boot sorry for my bad english hahah
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
gm007 said:
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
Click to expand...
Click to collapse
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
You can use that HWOTA method to recovery FullOTA rom no need to use FunkyHuawei.
forati89 said:
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Click to expand...
Click to collapse
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
m_adnan said:
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
Click to expand...
Click to collapse
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
gm007 said:
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
Click to expand...
Click to collapse
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
m_adnan said:
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
gm007 said:
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
Click to expand...
Click to collapse
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
m_adnan said:
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
Click to expand...
Click to collapse
Maybe you still have twrp installed?
Volume up + power without connecting usb.
gm007 said:
Maybe you still have twrp installed?
Volume up + power without connecting usb.
Click to expand...
Click to collapse
already tried, but without success.. it always end in that error mode..
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
how you managed to restore stock recovery? with frp only reading is allowed in fastboot i thought?
same probs here with my p10 vtr-l09 but cant get to one of the recoverys .. how can i tell the frp lock that everything is fine with my fastboot commands?
Sent from my HUAWEI HUAWEI GRA-L09 using XDA Labs
hi, did you manage to solve this problem?
Hi Guys,
I have Honor 8 Lite (PRA-LA1C185B165). I was on elite Rom 7.1 and just thought to restore my phone to original by the backup I took when installed Hassan's EliteRom. After restoring, phone booted normally, and then I resorted stock recovery. Phone now booted normally and then I relocked the bootloader after getting bootloader code from Huawei website. Now the phone booted but it just went into please update system error. Error! Func NO : 11 (reovery image) Error NO : 2 (load failed!). I discharged battery and now phone is booted into fastboot mode. Now it shows Fastboot & rescue Mode. Phone Relocked, FRP unlock, rescue mode enter... I tried adb devices, it shows blank devices... Plz anyone can help what to do?
Unlock your bootloader by using fastboot oem unlock XXXXXXXXXXXXXXXXXXXXXXXXX ( where X insert huawei code)
Thanks, did this and I have to go at lengths to again install twrp and then I was able to boot normally...Thanks...........One question could you plz guide how can I get this phone to original, i.e., unlocked bootloader and stock recovery... till now I have been unable to find stock recovery and official firmware for this model, PRA-LA1C185B165
My phone huawei p8 lite ALE-L21 STUCKS IN RESCUE MODE.THAT HAPPENS ,
I ROOTED MY PHONE AND I WANT TO INSTALL TWRP.SO I DOWNLOAD IMAGE FOR HUAWEI AND INSTALL AN APP FLASH RECOVERY.WHEN I CLICK OPTION UNLOCK BOOT LOADER MY PHONE ENTERS INTO FASTBOOT AND RECOVERY MODE AND IT SAYS MY PHONE WAS UNLOCKED. THEN I CLICK AN ANOTHER OPTION AND IT TURNS MY PHONE INTO STUCK. MY PHONE WAS PERFECTLY WORKING BEFORE AND ONLY A CLICK CHANGED IT ALL.. ON MY SCREEN IT SAYS
Error!
Func No:10(boot image)
Error No:2(boot image failed in normalboot mode)
Attention!
Please update your system again.
Update user guide :
Zh.ui.vmall.com/emotiondownload.php?mod=restore
WHAT DID I DO??
I GO TO MANY REPAIRING CENTERS AND THEY CANT DO THIS..
PLEASE HELP ME....PLEASE....THE KEYS (VOLUME AND POWER IS BOTH NOT WORKING.BUT I CAN REPAIR IT).
I HAVE A LAPTOP.SO GIVE ME ADVICES I CAN DO IT..
IMHO you unrecoverably bricked the phone, otherwise the repair centers you contacted could have helped.